Effects of Chronic Exposure to Crack Cocaine on the Respiratory Tract of Mice

Smoked cocaine (crack cocaine) causes several forms of injury to the respiratory tract, including asthma exacerbations, lung edema and hemorrhage, and nasal mucosal alterations. Few studies, however, have assessed respiratory tract pathology in habitual users of crack cocaine. Here, we describe the histological alterations in the respiratory tract of mice caused by chronic inhalation of crack cocaine. Twenty 2-month-old BALB/c mice were exposed to the smoke of 5 g crack cocaine in an inhalation chamber once a day for two months and compared to controls (n = 10). We then morphometrically analyzed nose and bronchiolar epithelial alterations, bronchiolar and alveolar macrophage cell density, alveolar hemosiderin content, and in addition determined the vasoconstriction index and the wall thickness of pulmonary arteries. The serum cocaine level was 212.5 ng/mL after a single inhalation. The mucus content of the nasal epithelium increased in crack-exposed animals, and the nasal and bronchial epithelium thickness decreased significantly. The alveolar hemosiderin content and the alveolar and bronchiolar macrophage cell density increased in animals exposed to crack. The vasoconstriction index increased in the pulmonary arteries of the exposed group. Chronic crack cocaine inhalation causes extensive histological changes along the entire respiratory tract.

Slow crack growth and reliability of dental ceramics

Objective. To determine the slow crack growth (SCG) and Weibull parameters of five dental ceramics: a vitreous porcelain (V), a leucite-based porcelain (D), a leucite-based glass-ceramic (E1), a lithium disilicate glass-ceramic (E2) and a glass-infiltrated alumina composite (IC). Methods. Eighty disks (empty set 12mm x 1.1mm thick) of each material were constructed according to manufacturers` recommendations and polished. The stress corrosion susceptibility coefficient (n) was obtained by dynamic fatigue test, and specimens were tested in biaxial flexure at five stress rates immersed in artificial saliva at 37 degrees C. Weibull parameters were calculated for the 30 specimens tested at 1MPa/s in artificial saliva at 37 degrees C. The 80 specimens were distributed as follows: 10 for each stress rate (10(-2), 10(-1), 10(1), 10(2) MPa/s), 10 for inert strength (10(2) MPa/s, silicon oil) and 30 for 10(0) MPa/s. Fractographic analysis was also performed to investigate the fracture origin. Results. E2 showed the lowest slow crack growth susceptibility coefficient (17.2), followed by D (20.4) and V (26.3). E1 and IC presented the highest n values (30.1 and 31.1, respectively). Porcelain V presented the lowest Weibull modulus (5.2). All other materials showed similar Weibull modulus values, ranging from 9.4 to 11.7. Fractographic analysis indicated that for porcelain D, glass-ceramics E1 and E2, and composite IC crack deflection was the main toughening mechanism. Significance. This study provides a detailed microstructural and slow crack growth characterization of widely used dental ceramics. This is important from a clinical standpoint to assist the clinician in choosing the best ceramic material for each situation as well as predicting its clinical longevity. It also can be helpful in developing new materials for dental prostheses. (c) 2010 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Effect of ion exchange on strength and slow crack growth of a dental porcelain

Objectives. To determine the effect of ion exchange on slow crack growth (SCG) parameters (n, stress corrosion susceptibility coefficient, and sigma(f0), scaling parameter) and Weibull parameters (m, Weibull modulus, and sigma(0), characteristic strength) of a dental porcelain. Methods. 160 porcelain discs were fabricated according to manufacturer`s instructions, polished through 1 mu m and divided into two groups: GC (control) and GI (submitted to an ion exchange procedure using a KNO(3) paste at 470 degrees C for 15 min). SCG parameters were determined by biaxial flexural strength test in artificial saliva at 37 degrees C using five constant stress rates (n =10). 20 specimens of each group were tested at 1 MPa/s to determine Weibull parameters. The SPT diagram was constructed using the least-squares fit of the strength data versus probability of failure. Results. Mean values of m and sigma(0) (95% confidence interval), n and sigma(f0) (standard deviation) were, respectively: 13.8 (10.1-18.8) and 60.4 (58.5 - 62.2), 24.1 (2.5) and 58.1 (0.01) for GC and 7.4 (5.3 -10.0) and 136.8 (129.1-144.7), 36.7 (7.3) and 127.9 (0.01) for GI. Fracture stresses (MPa) calculated using the SPT diagram for lifetimes of 1 day, 1 year and 10 years (at a 5% failure probability) were, respectively, 31.8, 24.9 and 22.7 for GC and 71.2, 60.6 and 56.9 for GI. Significance. For the porcelain tested, the ion exchange process improved strength and resistance to SCG, however, the material`s reliability decreased. The predicted fracture stress at 5% failure probability for a lifetime of 10 years was also higher for the ion treated group. (C) 009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Subcritical crack growth in porcelains, glass-ceramics, and glass-infiltrated alumina composite for dental restorations

The objective was to compare fracture toughness (K(Ic)), stress corrosion susceptibility coefficient (n), and stress intensity factor threshold for crack propagation (K(I0)) of two porcelains [VM7/Vita (V) and d.Sign/Ivoclar (D)], two glass-ceramics [Empress/Ivolcar (E1) and Empress2/Ivlocar (E2)] and a glass-infiltrated alumina composite [In-Ceram Alumina/Vita (IC)]. Disks were constructed according to each manufacturer`s processing method, and polished before induction of cracks by a Vickers indenter. Crack lengths were measured under optical microscopy at times between 0.1 and 100 h. Specimens were stored in artificial saliva at 37A degrees C during the whole experiment. K(Ic) and n were determined using indentation fracture method. K(I0) was determined by plotting log crack velocity versus log K(I). Microstructure characterization was carried out under SEM, EDS, X-ray diffraction and X-ray fluorescence. IC and E2 presented higher K(Ic) and K(I0) compared to E1, V, and D. IC presented the highest n value, followed by E2, D, E1, and V in a decreasing order. V and D presented similar K(Ic), but porcelain V showed higher K(I0) and lower n compared to D. Microstructure features (volume fraction, size, aspect ratio of crystalline phases and chemical composition of glassy matrix) determined K(Ic). The increase of K(Ic) value favored the increases of n and K(I0).

Influence of leucite content on slow crack growth of dental porcelains

Objectives. To determine the stress corrosion susceptibility coefficient, n, of seven dental porcelains (A: Ceramco I; B: Ceramco-II; C: Ceramco-III; D: d.Sign; E: Cerabien; F: Vitadur-Alpha; and G: Ultropaline) after aging in air or artificial saliva, and correlate results with leucite content (LC). Methods. Bars were fired according to manufacturers` instructions and polished before induction of cracks by a Vickers indenter (19.6 N, 20 s). Four specimens were stored in air/room temperature, and three in saliva/37 degrees C. Five indentations were made per specimen and crack lengths measured at the following times: similar to 0; 1; 3; 10; 30; 100; 300; 1000 and 3000 h. The stress corrosion coefficient n was calculated by linear regression analysis after plotting crack length as a function of time, considering that the slope of the curve was (2/(3n + 2)]. Microstructural analysis was performed to determine LC. Results. LC of the porcelains were 22% (A and B); 6% (C); 15% (D); 0% (E and F); and 13% (G). Except for porcelains A and D, all materials showed a decrease in their n values when stored in artificial saliva. However, the decrease was more pronounced for porcelains B, F, and G. Ranking of materials varied according to storage media (in air, porcelain G showed higher n compared to A, while in saliva both showed similar coefficients). No correlation was found between n values and LC in air or saliva. Significance. Storage media influenced the n value obtained for most of the materials. LC did not affect resistance to slow crack growth regardless of the test environment. (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Influence of pH on slow crack growth of dental porcelains

Objectives. To evaluate the effect of pH of storage medium on slow crack growth (SCG) parameters of dental porcelains. Methods. Two porcelains were selected: with (UD) and without (VM7) leucite particles, in order to assess if the microstructure would affect the response of the material to the pH variation. Disc specimens were produced following manufacturers` instructions. Specimens were stored in artificial saliva in pHs 3.5, 7.0 or 10.0 for 10 days and after that the fatigue parameters (n: SCG susceptibility coefficient and sigma(0): scaling parameter) were obtained by the dynamic fatigue test using the same pH of storage. Microstructural analysis of the materials was also performed. Results. For VM7, the values of n obtained in the different pHs were similar and varied from 29.9 to 31.2. The sigma(0) value obtained in pH 7.0 for VM7 was higher than that obtained in the other pHs, which were similar. For porcelain UD, n values obtained in pHs 7.0 and 10.0 were similar (40.8 and 39.6, respectively), and higher than that obtained in pH 3.5 (26.5). With respect to sigma(0), the value obtained for porcelain UD in pH 10.0 was lower than those obtained in pHs 3.5 and 7.0, which were similar. Significance. The effect of pH on the stress corrosion susceptibility (n) depended on the porcelain studied. While the n value of VM7 was not affected by the pH, UD presented lower n value in acid pH. For both porcelains, storage in acid or basic pH resulted in strength degradation. (C) 2007 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Crack detection in hollow section structures through coupled response measurements

Detection of a circumferential crack in a hollow section beam is investigated using coupled response measurements. The crack section is represented by a local flexibility matrix connecting two undamaged beam segments. This matrix defines the relationship between the displacements and forces across the crack section and is derived by applying fundamental fracture mechanics theory. The suitability of the mode coupling methodology is first demonstrated analytically. Laboratory test results are then presented for circular hollow section beams with artificially generated cracks of varying severity. It is shown that this method has the potential as a damage detection tool for mechanical structures. (C) 2002 Elsevier Science Ltd. All rights reserved.

Seqüência de drogas consumidas por usuários de crack e fatores interferentes

OBJETIVO: Identificar, entre usuários de crack, uma progressão no uso de drogas e seus fatores interferentes. MÉTODOS: Utilizou-se metodologia qualitativa para uma investigação mais profunda, considerando o ponto de vista que o entrevistado tem do fenômeno. Foram aplicados entrevistas de longa duração e questionários semi-estruturados. Foi delineada uma amostra intencional, e uma amostragem com critérios foi conseguida. Para atingir a saturação teórica, foram entrevistados 31 usuários ou ex-usuários de crack. RESULTADOS: Foram detectadas duas fases distintas de uso de drogas. A primeira, com drogas lícitas, sendo o cigarro e o álcool as mais citadas pela amostra. Parentes e amigos dos entrevistados foram os incentivadores do consumo, e o motivo alegado para o uso dessas substâncias foi a necessidade de autoconfiança. A idade precoce do consumo e o uso pesado de uma ou ambas as drogas foram determinantes para o início de uma escalada de drogas ilícitas. A maconha foi a primeira droga dessa segunda fase. Uma postura mais ativa na busca da droga como fonte de prazer passou a ser o motivo do consumo. CONCLUSÕES: O estudo revela que a identificação de uma seqüência de drogas parece estar mais associada a fatores externos (pressões de grupo, influência do tráfico etc.) do que à preferência do usuário. Foram identificadas duas progressões diferentes: entre os mais jovens (=30 anos), cuja a escalada começou com o cigarro e/ou álcool e passou pela maconha e cocaína aspirada até o uso de crack; e os mais velhos (>30 anos), que iniciaram o uso de drogas pelo cigarro e/ou álcool, seguido de maconha, medicamentos endovenosos, cocaína aspirada, cocaína endovenosa e, por fim, crack.

Caracterização da cultura de crack na cidade de São Paulo: padrão de uso controlado

OBJETIVO: Caracterizar a situação do uso de crack na cidade de São Paulo, assim como o perfil sociodemográfico de seu usuário. PROCEDIMENTOS METODOLÓGICOS: Estudo qualitativo etnográfico com amostra intencional de usuários (n=45) e ex-usuários de crack (n=17). Os participantes foram recrutados pela técnica de amostragem em cadeias e responderam a uma entrevista semi-estruturada, direcionada por questionário, durante os anos de 2004 e 2005. O conjunto de cada questão e suas respectivas respostas originou relatórios específicos que foram interpretados individualmente. ANÁLISE DOS RESULTADOS: O perfil predominante do usuário de crack foi ser homem, jovem, solteiro, de baixa classe socioeconômica, baixo nível de escolaridade e sem vínculos empregatícios formais. O padrão de uso mais freqüentemente citado foi o compulsivo, caracterizado pelo uso múltiplo de drogas e desenvolvimento de atividades ilícitas em troca de crack ou dinheiro. Entretanto, identificou-se o uso controlado que consiste no uso não-diário de crack, mediado por fatores individuais, desenvolvidos intuitivamente pelo usuário e semelhantes, em natureza, às estratégias adotadas por ex-usuários para o alcance do estado de abstinência. CONCLUSÕES: A cultura do uso de crack tem sofrido mudanças quanto ao padrão de uso. Embora a maioria dos usuários o faça de forma compulsiva, observou-se a existência do uso controlado, que merece maior detalhamento, principalmente quanto às estratégias adotadas para seu alcance.

HIV/AIDS risk among female sex workers who use crack in Southern Brazil

OBJECTIVE: To understand the social context of female sex workers who use crack and its impact on HIV/AIDS risk behaviors. METHODODOLOGICAL PROCEDURES: Qualitative study carried out in Foz do Iguaçu, Southern Brazil, in 2003. Twenty-six in-depth interviews and two focus groups were carried out with female commercial sex workers who frequently use crack. In-depth interviews with health providers, community leaders and public policy managers, as well as field observations were also conducted. Transcript data was entered into Atlas.ti software and grounded theory methodology was used to analyze the data and develop a conceptual model as a result of this study. ANALYSIS OF RESULTS: Female sex workers who use crack had low self-perceived HIV risk in spite of being engaged in risky behaviors (e.g. unprotected sex with multiple partners). Physical and sexual violence among clients, occasional and stable partners was widespread jeopardizing negotiation and consistent condom use. According to health providers, community leaders and public policy managers, several female sex workers who use crack are homeless or live in slums, and rarely have access to health services, voluntary counseling and testing, social support, pre-natal and reproductive care. CONCLUSIONS: Female sex workers who use crack experience a plethora of health and social problems, which apparently affect their risks for HIV infection. Low-threshold, user-friendly and gender-tailored interventions should be implemented, in order to increase the access to health and social-support services among this population. Those initiatives might also increase their access to reproductive health in general, and to preventive strategies focusing on HIV/AIDS and other sexually transmitted infections.

Futuros sobre a margem operacional da refinação do petróleo bruto: crack spreads

Mestrado em Contabilidade Internacional

Evolução do consumo de crack em coorte com histórico de tratamento

OBJETIVO: Analisar a evolução do consumo entre usuários de crack com histórico de tratamento. MÉTODOS: Uma coorte de, originalmente, 131 dependentes de crack admitidos em uma enfermaria de desintoxicação em São Paulo, SP, entre 1992 e 1994, foi re-entrevistada em três ocasiões: 1995-1996, 1998-1999 e 2005-2006. As variáveis averiguadas foram: dados demográficos, comportamento sexual de risco, padrões de consumo de crack e outras substâncias, prisões, desaparecimentos e óbitos. Na análise estatística empregou-se o teste de qui-quadrado, a regressão logística multinomial e regressão de Cox. RESULTADOS: Dos pacientes avaliados, 43 estavam abstinentes do crack (12 meses ou mais), 22 eram usuários, 13 estavam presos, dois desaparecidos e 27 estavam mortos. Foram identificados três grupos com trajetórias distintas de consumo pós-alta. Comportamento seguro com uso de preservativo foi identificado como fator relacionado ao grupo de abstinentes estáveis (p = 0,001). Teste HIV positivo na internação (p = 0,046); consumo de cocaína aspirada no último ano (p = 0,001) e tempo de uso de cocaína aspirada na vida (mais de 132 meses) (p = 0,000) foram fatores relacionados a uso de longo termo. Uso pregresso de cocaína endovenosa aumentou em 2,5 vezes as chances de óbito em 12 anos (p = 0,031) (IC95%: 1,08; 5,79). CONCLUSÕES: A recorrência e persistência do consumo nos anos pós-alta de tratamento refletem novas modalidades de uso do crack. Por outro lado, padrões de abstinência estável apontam a viabilidade dos processos de recuperação relativos ao uso de crack.

Fissura por crack: comportamentos e estratégias de controle de usuários e ex-usuários

OBJETIVO: Compreender a fissura do usuário de crack, bem como descrever os comportamentos desenvolvidos sob fissura e estratégias utilizadas para seu controle. PROCEDIMENTOS METODOLÓGICOS: Estudo qualitativo com amostra intencional por critérios de 40 usuários e ex-usuários de crack em São Paulo, SP, nos anos de 2007 e 2008. Os entrevistados foram recrutados pela técnica da bola de neve e submetidos à entrevista semi-estruturada em profundidade, até a saturação teórica. Após transcrição literal, seguiu-se a análise do conteúdo das entrevistas para elaboração de inferências e hipóteses alicerçadas nessas narrativas. ANÁLISE DOS RESULTADOS: Os entrevistados estavam igualmente distribuídos quanto ao sexo, possuíam idade entre 18 e 50 anos, abrangeram todos os níveis de escolaridade e a maior parte possuía poucos recursos financeiros. Além da fissura sentida na abstinência de crack e da fissura induzida por pistas ambientais e emocionais, constatou-se um tipo de fissura que faz parte do próprio efeito do crack. Esta última apareceu como forte fator mantenedor dos binges de consumo, que foram os maiores responsáveis pelo rebaixamento de valores do usuário, sujeitando-o a práticas arriscadas para a obtenção da droga. Os métodos mais citados para a obtenção de crack ou dinheiro para comprá-lo foram: prostituição, manipulação de pessoas, endividamento, troca de pertences por crack e roubo. Foram relatadas estratégias para o alívio da fissura e táticas farmacológicas e comportamentais para evitar o seu desenvolvimento, como: comer, ter relação sexual, jogar futebol, trabalhar, evitar o contexto social de uso de crack e usar drogas que causam sonolência. CONCLUSÕES: Os binges de consumo de crack são causados pela fissura induzida durante o uso da droga. As medidas criadas pelo próprio usuário para lidar com a sua fissura melhoram sua relação com o crack e podem ser ferramenta importante para o aprimoramento do tratamento.

Mode III interlaminar fracture of carbon/epoxy laminates using the edge crack torsion (ECT) test

The mode III interlaminar fracture of carbon/epoxy laminates was evaluated with the edge crack torsion (ECT) test. Three-dimensional finite element analyses were performed in order to select two specimen geometries and an experimental data reduction scheme. Test results showed considerable non-linearity before the maximum load point and a significant R-curve effect. These features prevented an accurate definition of the initiation point. Nevertheless, analyses of non-linearity zones showed two likely initiation points corresponding to GIIIc values between 850 and 1100 J/m2 for both specimen geometries. Although any of these values is realistic, the range is too broad, thus showing the limitations of the ECT test and the need for further research.