Design and process selection for joints in flexible materials

The application of high performance textiles has grown significantly in the last 10 to 15 years. Various research groups throughout the United Kingdom, such as the Department of Trade and Industry, have identified technical textiles as a field for future development. There is little design guidance for joining of flexible materials or general property models that can be applied to theses materials. This lack is due to the large diversity of properties, structures and resulting behaviours of the materials that are classified as "Flexible Materials". This dissertation explores the issues that are involved in characterising the materials at the fibre, bulk and textile levels. Different units of measurement are used for each stage of the manufacturing process of flexible materials and this disparity creates problems when trying to make general comparisons (e.g. comparing textiles to polymer films). Thus, a possible solution to this is to create selection charts that allow designers to compare the strength of materials for a given mass per unit area. A design tool was created using the Cambridge Engineering Selector (CES) software to enable the selection of joining processes for material. The tool is effective in selecting a reduced number of viable joining processes. Through case studies it was shown that designers are required to examine the selected processes (identified by the software) in greater detail - in particular the economics and geometry of the joint - in order to identify the optimum joining process.

Development and use of a computer simulation model for the evaluation of design and control alternatives for intersections of minor roads with multi-lane rural highways: selection of the simulation model. Interim report.

Federal Highway Administration, Washington, D.C.

The selection of preferred metric values for design and construction /

Sponsored by Naval Facilities Engineering Command, Department of the Navy.

Effects of short term oven aging on volumetrics and selection of N-design /

"Study was conducted in cooperation with the U.S. Department of Transportation, Federal Highway Administration."

Policy and Design Guidelines for Trees in a Growing Seattle

Thesis (Master's)--University of Washington, 2016-08

Towards guidelines for curriculum design and development in English language teacher education in Cambodian higher education institutions

In the current Cambodian higher education sector, there is little regulation of standards in curriculum design of undergraduate degrees in English language teacher education. The researcher, in the course of his professional work in the Curriculum and Policy Office at the Department of Higher Education, has seen evidence that most universities tend to copy their curriculum from one source, the curriculum of the Institute of Foreign Languages, the Royal University of Phnom Penh. Their programs fail to impose any entry standards, accepting students who pass the high school exam without any entrance examination. It is possible for a student to enter university with satisfactory scores in all subjects but English. Therefore, not many graduates are able to fulfil the professional requirements of the roles they are supposed to take. Neau (2010) claims that many Cambodian EFL teachers do not reach a high performance standard due to their low English language proficiency and poor background in teacher education. The main purpose of this study is to establish key guidelines for developing curricula for English language teacher education for all the universities across the country. It examines the content of the Bachelor‘s degree of Education in Teaching English as a Foreign Language (B Ed in TEFL) and Bachelor‘s degree of Arts in Teaching English to Speakers of Other Languages (BA in TESOL) curricula adopted in Cambodian universities on the basis of criteria proposed in current curriculum research. It also investigates the perspectives of Cambodian EFL teachers on the areas of knowledge and skill they need in order to perform their English teaching duties in Cambodia today. The areas of knowledge and skill offered in the current curricula at Cambodian higher education institutions (HEIs), the framework of the knowledge base for EFL teacher education and general higher education, and the areas of knowledge and skill Cambodian EFL teachers perceive to be important, are compared so as to identify any gaps in the current English language teacher education curricula in the Cambodian HEIs. The existence of gaps show what domains of knowledge and skill need to be included in the English language teacher education curricula at Cambodian HEIs. These domains are those identified by previous curriculum researchers in both general and English language teacher education at tertiary level. Therefore, the present study provides useful insights into the importance of including appropriate content in English language teacher education curricula. Mixed methods are employed in this study. The course syllabi and the descriptions within the curricula in five Cambodian HEIs are analysed qualitatively based on the framework of knowledge and skills for EFL teachers, which is formed by looking at the knowledge base for second language teachers suggested by the methodologists and curriculum specialists whose work is elaborated on the review of literature. A quantitative method is applied to analyse the perspectives of 120 Cambodian EFL teachers on areas of knowledge and skills they should possess. The fieldwork was conducted between June and August, 2014. The analysis reveals that the following areas are included in the curricula at the five universities: communication skills, general knowledge, knowledge of teaching theories, teaching skills, pedagogical reasoning and decision making skills, subject matter knowledge, contextual knowledge, cognitive abilities, and knowledge of social issues. Additionally, research skills are included in three curricula while society and community involvement is in only one. Further, information and communication technology, which is outlined in the Education Strategies Plan (2006-2010), forms part of four curricula while leadership skills form part of two. This study demonstrates ultimately that most domains that are directly and indirectly related to language teaching competence are not sufficiently represented in the current curricula. On the basis of its findings, the study concludes with a set of guidelines that should inform the design and development of TESOL and TEFL curricula in Cambodia.

Creative design and the generative evolutionary paradigm

Design as seen from the designer's perspective is a series of amazing imaginative jumps or creative leaps. But design as seen by the design historian is a smooth progression or evolution of ideas that they seem self-evident and inevitable after the event. But the next step is anything but obvious for the artist/creator/inventor/designer stuck at that point just before the creative leap. They know where they have come from and have a general sense of where they are going, but often do not have a precise target or goal. This is why it is misleading to talk of design as a problem-solving activity - it is better defined as a problem-finding activity. This has been very frustrating for those trying to assist the design process with computer-based, problem-solving techniques. By the time the problem has been defined, it has been solved. Indeed the solution is often the very definition of the problem. Design must be creative-or it is mere imitation. But since this crucial creative leap seem inevitable after the event, the question must arise, can we find some way of searching the space ahead? Of course there are serious problems of knowing what we are looking for and the vastness of the search space. It may be better to discard altogether the term "searching" in the context of the design process: Conceptual analogies such as search, search spaces and fitness landscapes aim to elucidate the design process. However, the vastness of the multidimensional spaces involved make these analogies misguided and they thereby actually result in further confounding the issue. The term search becomes a misnomer since it has connotations that imply that it is possible to find what you are looking for. In such vast spaces the term search must be discarded. Thus, any attempt at searching for the highest peak in the fitness landscape as an optimal solution is also meaningless. Futhermore, even the very existence of a fitness landscape is fallacious. Although alternatives in the same region of the vast space can be compared to one another, distant alternatives will stem from radically different roots and will therefore not be comparable in any straightforward manner (Janssen 2000). Nevertheless we still have this tantalizing possibility that if a creative idea seems inevitable after the event, then somehow might the process be rserved? This may be as improbable as attempting to reverse time. A more helpful analogy is from nature, where it is generally assumed that the process of evolution is not long-term goal directed or teleological. Dennett points out a common minsunderstanding of Darwinism: the idea that evolution by natural selection is a procedure for producing human beings. Evolution can have produced humankind by an algorithmic process, without its being true that evolution is an algorithm for producing us. If we were to wind the tape of life back and run this algorithm again, the likelihood of "us" being created again is infinitesimally small (Gould 1989; Dennett 1995). But nevertheless Mother Nature has proved a remarkably successful, resourceful, and imaginative inventor generating a constant flow of incredible new design ideas to fire our imagination. Hence the current interest in the potential of the evolutionary paradigm in design. These evolutionary methods are frequently based on techniques such as the application of evolutionary algorithms that are usually thought of as search algorithms. It is necessary to abandon such connections with searching and see the evolutionary algorithm as a direct analogy with the evolutionary processes of nature. The process of natural selection can generate a wealth of alternative experiements, and the better ones survive. There is no one solution, there is no optimal solution, but there is continuous experiment. Nature is profligate with her prototyping and ruthless in her elimination of less successful experiments. Most importantly, nature has all the time in the world. As designers we cannot afford prototyping and ruthless experiment, nor can we operate on the time scale of the natural design process. Instead we can use the computer to compress space and time and to perform virtual prototyping and evaluation before committing ourselves to actual prototypes. This is the hypothesis underlying the evolutionary paradigm in design (1992, 1995).

An adolescent injury intervention : selecting targeted behaviours with implications for program design and evaluation

Objectives: This paper sought to identify the behaviour change targets for an injury prevention program; Skills for Preventing Injury in Youth, SPIY. The aim was to explore how such behaviours could subsequently be implemented and evaluated in the program. Methods and Design: The quantitative procedure involved a survey with 267 Year 8 and 9 students (mean age 13.23 years) regarding their engagement in risk-taking behaviours that may lead to injury. The qualitative study involved 30 students aged 14 to 17 years reporting their experiences of injury and risk-taking. Results: Injury risk behaviours co-occurred among three-quarters of those who reported engaging in any alcohol use or transport or violence related injury risk behaviour. Students described in detail some of these experiences. Conclusions: The selection process of identifying target behaviours for change for an injury prevention program is described. Adolescents’ description of such risk behaviours can inform the process of operationalising and contextualising program content and deciding on evaluation methodology. The design of an effective injury prevention program involves considerable preparatory work and this paper was able to describe the process of identifying the behavioural targets for change that can be operationalised and evaluated in the injury prevention program, SPIY.

Air Conditioning Systems : Design and Energy efficiency

Air conditioning systems have become an integral part of many modern buildings. Proper design and operation of air conditioning systems have significant impact not only on the energy use and greenhouse gas emissions from the buildings, but also on the thermal comfort and productivity of the occupants. In this paper, the purpose and need of installing air conditioning systems is first introduced. The methods used for the classification of air conditioning systems are then presented. This is followed by a discussion on the pros and cons of each type of the air conditioning systems, including both common and new air conditioning technologies. The procedures used to design air conditioning systems are also outlined, and the implications of air conditioning systems, including design, selection, operation and maintenance, on building energy efficiency is also discussed.

Preliminary Design and Performance Estimation of Radial Inflow Turbines: An Automated Approach

A comprehensive one-dimensional meanline design approach for radial inflow turbines is described in the present work. An original code was developed in Python that takes a novel approach to the automatic selection of feasible machines based on pre-defined performance or geometry characteristics for a given application. It comprises a brute-force search algorithm that traverses the entire search space based on key non-dimensional parameters and rotational speed. In this study, an in-depth analysis and subsequent implementation of relevant loss models as well as selection criteria for radial inflow turbines is addressed. Comparison with previously published designs, as well as other available codes, showed good agreement. Sample (real and theoretical) test cases were trialed and results showed good agreement when compared to other available codes. The presented approach was found to be valid and the model was found to be a useful tool with regards to the preliminary design and performance estimation of radial inflow turbines, enabling its integration with other thermodynamic cycle analysis and three-dimensional blade design codes.