Hlídka.

Mode of access: Internet.

Novina

"List duševní kultury české"

Bursaphelenchus pinophilus Brzeski & Baujard, 1997 (Nematoda: Parasitaphelenchinae) associated with nematangia on Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae), from the Czech Republic

The occurrence of Bursaphelenchus species in the Czech Republic is poorly known, the first report of the genus being made by Kubátová et al. (2000) who reported the association of B. eremus with the hyphomycetous microfungus, Esteya vermicola, and the bark beetle, Scolytus intricatus, collected from Quercus robur, in central Bohemia. To date, four other species have been reported from the country, namely B. fungivorus (Braasch et al., 2002), B. hofmanni (see Braasch, 2001), B. mucronatus (see Braasch, 2001) and B. vallesianus (Gaar et al., 2006). More recently, a survey for Bursaphelenchus species associated with bark- and wood-boring insects in the Czech Republic identified B. pinophilus Brzeski & Baujard, 1997 from the Moravia region. Although this represents a new country record, it was also associated with nematangia on the hind wings of a new insect vector. A total of 404 bark- and wood-boring insects were collected from declining or symptomatic trees and screened for the presence of Bursaphelenchus. Bark and longhorn beetles were captured manually after debarking parts of the trunk displaying symptoms of insect attacks. Longhorn beetle larvae were also collected together with logs cut from the trunk. Logs were kept at room temperature in the laboratory until insect emergence. Each adult insect was individually dissected in water and examined for nematodes. All nematodes resembling dauer juveniles of Bursaphelenchus were collected and identified by molecular characterisation using a region of ribosomal DNA (rDNA) containing the internal transcribed spacer regions ITS1 and ITS2. ITS-RFLP analyses using five restriction enzymes (AluI, HaeIII, HinfI, MspI, RsaI) were performed to generate the species-specific profile according to Burgermeister et al. (2009). Species identification was also confirmed by morphological data after culture of the dauers on Botrytis cinerea Pers. ex Ft., growing in 5% malt extract agar. During this survey, only species belonging to the Curculionidae, subfamily Scolytinae, revealed the presence of nematodes belonging to Bursaphelenchus. Dauers of this genus were found aggregated under the elytra in nematangia formed at the root of the hind wings (Fig. 1). The dauers were identified from 12 individuals of Pityogenes bidentatus (Herbst, 1783) (Coleoptera: Scolytinae) collected under the bark of Pinus sylvestris trunks. Each insect carried ca 10-100 dauers. The ITS-RFLP patterns of the dauers so obtained confirmed the identification of B. pinophilus associated with this insect species. Bursaphelenchus pinophilus has been found mainly in Europe and has been reported from various countries such as Poland (Brzeski & Baujard, 1997), Germany (Braasch, 2001), and Portugal (Penas et al., 2007). The recent detection of this species associated with dead P. koraiensis in Korea (Han et al., 2009) expands its geographical distribution and potential importance. It has been found associated only with Pinus species, but very little is known about the insect vector. The bark beetle, Hylurgus ligniperda, was initially suggested as the insect vector by Pe-nas et al. (2006), although the nematode associated with this insect was later reclassified as B. sexdentati by morphological and molecular analysis (Penas et al., 2007). According to the literature, P. bidentatus has been cited as a vector of Ektaphelenchus sp. (Kakuliya, 1966) in Georgia, and an unidentified nematode species in Spain (Roberston et al., 2008). Interestingly, B. pinophilus was found in the nematangia formed at the root of the hind wings of P. bidentatus. Although this phenomenon is not so common in other Bursaphelenchus species, B. rufipennis has been found recently in such a structure on the hind wings of the insect Dendroctonus rufipennis (Kanzaki et al., 2008). Although other nematode species (e.g., Ektaphelenchus spp.) are frequently found associated within the same nematangia (see Kanzaki et al., 2008), in this particular case, only dauers of B. pinophilus were identified. The association between B. pinophilus and P. bidentatus represents the first report of this biological association and the association with the Scolytinae strengthens the tight and specific links between this group of Bursaphelenchus species and members of the Scolytinae (Ryss et al., 2005).

Neither security nor development? Czech and Hungarian identities and interests in the provincial reconstruction teams in Afghanistan

This article builds on the securitisation and post-development literature and it scrutinises the Czech and Hungarian legitimising discourses of the two countries’ respective Provincial Reconstruction Teams (PRTs) in the Logar and Baghlan provinces of Afghanistan from 2007 to 2013. In spite of the hybrid civil–military character of the PRTs, their security–development nexus was absent and they were respectively securitised and “developmentalised” only indirectly and to a varying extent. The PRTs were mostly justified by the Czech Republic's NATO membership as an identity issue and they were justified as a Hungarian national interest and as both an obligation and an opportunity. Rather than merely importing NATO's arguments as suggested by the previous literature, the depoliticisation and positive connotation of the intervention in Afghanistan was constructed by the domestic NATO-related identities and interests in the Czech Republic and Hungary.

The impact of the recession on health care expenditure — How does the Czech Republic, Hungary, Poland and Slovakia compare to other OECD countries?

In the past few years, several papers have been published in the international literature on the impact of the economic crisis on health and health care. However, there is limited knowledge on this topic regarding the Central and Eastern European (CEE) countries. The main aims of this study are to examine the effect of the financial crisis on health care spending in four CEE countries (the Czech Republic, Hungary, Poland and Slovakia) in comparison with the OECD countries. In this paper we also revised the literature for economic crisis related impact on health and health care system in these countries. OECD data released in 2012 were used to examine the differences in growth rates before and after the financial crisis. We examined the ratio of the average yearly growth rates of health expenditure expressed in USD (PPP) between 2008–2010 and 2000–2008. The classification of the OECD countries regarding “development” and “relative growth” resulted in four clusters. A large diversity of “relative growth” was observed across the countries in austerity conditions, however the changes significantly correlate with the average drop of GDP from 2008 to 2010. To conclude, it is difficult to capture visible evidence regarding the impact of the recession on the health and health care systems in the CEE countries due to the absence of the necessary data. For the same reason, governments in this region might have a limited capability to minimize the possible negative effects of the recession on health and health care systems.

The impact of the recession on health care expenditure — How does the Czech Republic, Hungary, Poland and Slovakia compare to other OECD countries?

In the past few years, several papers have been published in the international literature on the impact of the economic crisis on health and health care. However, there is limited knowledge on this topic regarding the Central and Eastern European (CEE) countries. The main aims of this study are to examine the effect of the financial crisis on health care spending in four CEE countries (the Czech Republic, Hungary, Poland and Slovakia) in comparison with the OECD countries. In this paper we also revised the literature for economic crisis related impact on health and health care system in these countries. OECD data released in 2012 were used to examine the differences in growth rates before and after the financial crisis. We examined the ratio of the average yearly growth rates of health expenditure expressed in USD (PPP) between 2008–2010 and 2000–2008. The classification of the OECD countries regarding “development” and “relative growth” resulted in four clusters. A large diversity of “relative growth” was observed across the countries in austerity conditions, however the changes significantly correlate with the average drop of GDP from 2008 to 2010. To conclude, it is difficult to capture visible evidence regarding the impact of the recession on the health and health care systems in the CEE countries due to the absence of the necessary data. For the same reason, governments in this region might have a limited capability to minimize the possible negative effects of the recession on health and health care systems.

Perceptions of Integration: What the Literature Says and What Stakeholders See

This paper compares perceptions of integrated marketing communication (IMC) to establish whether consumers perceive integration in the same way as the literature. It begins by reviewing the literature to identify shared assumptions about integration and factors thought to contribute to the integration of marketing communication and, in an experiment, compares these with the perceptions of consumers. Many of the shared assumptions in the literature have been supported by the findings of this study. Integration has been demonstrated to be both a strategy and a tactic. The strategic side is part of a management process and is unable to be observed by consumers from the marketing communication output. Consumers can, however, identify the tactics and are able to recall a number of integration factors such as logo, corporate colours and image. Consumers in the total message integration groups perceived the messages they received as more integrated than those in partial integration or no integration groups.

Literature Review Value Alignment Process for Project Delivery

The objective of the project “Value Alignment Process for Project Delivery” is to provide a catalyst and tools for reform in the building and construction industry to transform business-as-usual performance into exceptional performance. The outcomes of this project will be beneficial to not only the construction industry, but to the community as a whole because a more sophisticated industry can deliver more effective use of assets, financing, operating and maintenance of facilities to suit the community’s needs. The research project consists of a study into best practice project delivery and the development of a suite of products, resources and services to guide project teams towards the best approach for a specific project. These resources will be focused on promoting the principles that underlie best practice project delivery, rather than on identifying a particular delivery system. The need for such tools and resources becomes more and more acute as the environment within which the construction industry operates becomes more and more complex, and as business and political imperatives shift to encompass or represent diverse stakeholder interests. To this end, this literature review looks at why it is essential to achieve transformation in the Australian construction industry in the context of its importance to the Australian economy. It seeks to investigate the concepts of ‘alignment’ and value’ as they pertain to construction industry processes and relationships. It comprehensively reviews drivers of project excellence and best practice project delivery principles and looks at how clients approach selection of project delivery systems. It critiques existing project delivery strategies and gives an overview of recent best practice initiatives. The literature review represents a milestone against the Project Agreement and forms a foundation document for this research project

Influences on construction innovation : a brief overview of recent literature

This report reviews the most recent literature on construction innovation with the aim of highlighting the primary influences on innovation in the building and construction industry.

Literature review

This research aims to improve the economic and environmental sustainability of the construction & demolition waste and precast concrete supply chains through the development, trial and evaluation of an innovative public sector supply chain management strategy. The long-term goals are to improve competitive behaviour and market sector performance and improve business process efficiency and effectiveness of public sector program delivery by influencing policy development, changing organisational behaviour and implementation development to achieve more economic and environmental sustainable markets.

Literature review

There are many studies that reveal the nature of design thinking and the nature of conceptual design as distinct from detailed or embodiment design. The results can assist in our understanding of how the process of design can be supported and how new technologies can be introduced into the workplace. Existing studies provide limited information about the nature of collaborative design as it takes place on the ground and in the actual working context. How to provide appropriate and effective of support for collaborative design information sharing across companies, countries and heterogeneous computer systems is a key issue. As data are passed between designers and the computer systems they employ, many exchanges are made. These exchanges may be used to establish measures of the benefits that new support systems can bring. Collaboration support tools represent a fast growing section of the commercial software market place and a reasonable range of products are available. Many of them offer significant application to design for the support of distributed meetings by the provision of video and audio communications and the sharing of information, including collaborative sketching. The tools that specifically support 3D models and other very design specific features are less common and many of those are in prototype stages of development. A key question is to find viable ways of combining design information visualisation support with the collaboration support technologies that can be seen today. When collaborating, different views will need to be accessible at different times to all the collaborators. The architects may want to explain some ideas on their model, the structural engineers on their model and so on. However, there are issues of ownership when the structural engineer wants to manipulate the architect’s model and vice versa. The modes of working, synchronous or asynchronous may have a bearing as in a synchronous session there is control of what is happening.