Dye sensitized visible light degradation of phenolic compounds

The present research work reports the eosin Y (EY) and fluorescein (FL) sensitized visible light degradation of phenol, 4-chlorophenol (CP), 2,4-dichlorophenol (DCP) and 2,4,6-trichlorophenol (TCP) using combustion synthesized nano-TiO2 (CS TiO2). The rate of degradation of the phenolic compounds was higher in the presence of EY/CS TiO2 compared to FL/CS TiO2 system. A detailed mechanism of sensitized degradation was proposed and a mechanistic model for the rate of degradation of the phenolic compound was derived using the pyramidal network reduction technique. It was found that at low initial dye concentrations, the rate of degradation of the phenolic compound is first order in the concentration of the dye, while at high initial dye concentrations, the rate is first order in the concentration of the phenolic compound. The order of degradation of the different phenolic compounds follows: CP > TCP > DCP > phenol. The different phenolic and dye intermediates that were formed during the degradation were identified by liquid chromatography-mass spectrometry (LC-MS) and the most probable pathway of degradation is proposed. (C) 2010 Elsevier B.V. All rights reserved.

Fabrication and characterization of micro-arc oxidized fluoride containing titania films on Cp Ti

The present study is focussed at establishing an appropriate electrolyte system for developing electrochemically stable and fluorine (F) containing titania (F-TiO2) films on Cp Ti by micro-arc oxidation (MAO) technique. To fabricate the F-TiO2 films on Cp Ti, different electrolyte solutions of chosen concentrations of tri-sodium orthophosphate (TSOP, Na3PO4 center dot I2H2O), potassium hydroxide (KOH) and various F-containing compounds such as ammonium fluoride (NH4F), potassium fluoride (KF), sodium fluoride (NaF) and potassium fluorotitanate (K2TiF6) are employed. The structural and morphological characteristics, thickness and elemental composition of the developed films have been assessed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) techniques. The in-vitro electrochemical corrosion behavior of the films was studied under Kokubo simulated body fluid (SBF) environment by potentiodynamic polarization, long term potential measurement and electrochemical impedance spectroscopy (EIS) methods. The XRD and SEM-EDS results show that the rutile content in the films vary in the range of 15-37 wt% and the F and P contents in the films is found to be in the range of 2-3 at% and 2.9-4.7 at% respectively, suggesting that the anatase to rutile phase transformation and the incorporation of F and P into the films are significantly controlled by the respective electrolyte solution. The SEM elemental mapping results show that the electrolyte borne F and P elements are incorporated and distributed uniformly in all the films. Among all the films under study, the film developed with 5 g TSOP+2 g KOH+3 g K2TiF6 electrolyte system exhibits considerably improved in-vitro corrosion resistance and therefore best suited for biomedical applications. (C) 2012 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

Reaction of halfsandwich iridium polychalcogenide complexes with dimethyl acetylenedicarboxylate. Molecular structure of Cp*Ir[S2C2(COOMe)(2)]

The pentamethylcyclopentadienyl iridium complexes Cp*Ir(PMe3)(E-n) (E = S, n = 4, 5 or 6; E = Se, n = 2 or 4 E = Te, n = 2) react with dimethyl acetylenedicarboxylate to give Cp*Ir(PMe3)[E2C2(COOMe)(2)] compounds which tend to lose the trimethylphosphine ligand; the molecular structure of the dithiolene derivative, Cp*Ir[S2C2(COOMe)(2)], has been determined.

Polymerization of ethylene by zirconocene-B(C6F5)(3) catalysts with aluminum compounds

Ethylene polymerization by zirconocene-B(C6F5)(3) catalysts with various aluminum compounds has been investigated. It is found that the catalytic activity depended on zirconocenes used, and especially on the type of aluminum compounds. For Et(H(4)Ind)(2)ZrCl2 (H(4)Ind : tetrahydroindenyl), the activity decreases in the following order: Me3Al > i-Bu3Al > Et3Al much greater than Et2AlCl. While for Cp2ZrCl2(Cp : cyclopentadienyl), it varies as follows: i-Bu3Al > Me3Al much greater than Et3Al. Furthermore, the activity is significantly affected by the addition mode of the catalytic components, which may imply that the formation of active centers is associated with an existing concentration of catalytic components. Results of thermal behavior of polyethylene (PE) studied by differential scanning calorimetry(DSC) show that crystallinity of the polymer prepared with Et3Al is higher than that with Me3Al or i-Bu3Al. It is also found that the number-average molecular weight ((M) over bar) of the polymers prepared with Me3Al or i-Bu3Al is much higher than that with Et3Al. H-1-NMR studies substantiate that i-Bu3Al is a more efficient alkylation agent of Cp2ZrCl2 in comparison with Me3Al. (C) 1997 John Wiley & Sons, Inc.

Magnitude differences in bioactive compounds, chemical functional groups, fatty acid profiles, nutrient degradation and digestion, molecular structure and metabolic characteristics of protein in newly developed yellow-seeded and black-seeded canola lines.

Recently, new lines of yellow-seeded (CS-Y) and black-seeded canola (CS-B) have been developed with chemical and structural alteration through modern breeding technology. However, no systematic study was found on the bioactive compounds, chemical functional groups, fatty acid profiles, inherent structure, nutrient degradation and absorption, or metabolic characteristics between the newly developed yellow- and black-seeded canola lines. This study aimed to systematically characterize chemical, structural, and nutritional features in these canola lines. The parameters accessed include bioactive compounds and antinutrition factors, chemical functional groups, detailed chemical and nutrient profiles, energy value, nutrient fractions, protein structure, degradation kinetics, intestinal digestion, true intestinal protein supply, and feed milk value. The results showed that the CS-Y line was lower (P ≤ 0.05) in neutral detergent fiber (122 vs 154 g/kg DM), acid detergent fiber (61 vs 99 g/kg DM), lignin (58 vs 77 g/kg DM), nonprotein nitrogen (56 vs 68 g/kg DM), and acid detergent insoluble protein (11 vs 35 g/kg DM) than the CS-B line. There was no difference in fatty acid profiles except C20:1 eicosenoic acid content (omega-9) which was in lower in the CS-Y line (P < 0.05) compared to the CS-B line. The glucosinolate compounds differed (P < 0.05) in terms of 4-pentenyl, phenylethyl, 3-CH3-indolyl, and 3-butenyl glucosinolates (2.9 vs 1.0 μmol/g) between the CS-Y and CS-B lines. For bioactive compounds, total polyphenols tended to be different (6.3 vs 7.2 g/kg DM), but there were no differences in erucic acid and condensed tannins with averages of 0.3 and 3.1 g/kg DM, respectively. When protein was portioned into five subfractions, significant differences were found in PA, PB1 (65 vs 79 g/kg CP), PB2, and PC fractions (10 vs 33 g/kg CP), indicating protein degradation and supply to small intestine differed between two new lines. In terms of protein structure spectral profile, there were no significant differences in functional groups of amides I and II, α helix, and β-sheet structure as well as their ratio between the two new lines, indicating no difference in protein structure makeup and conformation between the two lines. In terms of energy values, there were significant differences in total digestible nutrient (TDN; 149 vs 133 g/kg DM), metabolizable energy (ME; 58 vs 52 MJ/kg DM), and net energy for lactation (NEL; 42 vs 37 MJ/kg DM) between CS-Y and CS-B lines. For in situ rumen degradation kinetics, the two lines differed in soluble fraction (S; 284 vs 341 g/kg CP), potential degradation fraction (D; 672 vs 590 g/kg CP), and effective degraded organic matter (EDOM; 710 vs 684 g/kg OM), but no difference in degradation rate. CS-Y had higher digestibility of rumen bypass protein in the intestine than CS-B (566 vs 446 g/kg of RUP, P < 0.05). Modeling nutrient supply results showed that microbial protein synthesis (MCP; 148 vs 171 g/kg DM) and rumen protein degraded balance (DPB; 108 vs 127 g/kg DM) were lower in the CS-Y line, but there were no differences in total truly digested protein in small intestine (DVE) and feed milk value (FMV) between the two lines. In conclusion, the new yellow line had different nutritional, chemical, and structural features compared to the black line. CS-Y provided better nutrient utilization and availability.

Phenolic compounds from forest industrial by-products

Em Portugal, as indústrias corticeira e de pasta de papel constituem um importante sector económico, contudo, gerando elevadas quantidades de subprodutos. Estes subprodutos poderiam ser explorados em aplicações de alto valor acrescentado, como fonte de compostos fenólicos, por exemplo, em vez de serem apenas queimados para produção de energia. Estes compostos são conhecidos pelas suas inúmeras propriedades, entre as quais, antioxidante, anti-inflamatória e anti-trombótica. Neste estudo as frações fenólicas da maior parte dos subprodutos gerados nas indústrias corticeira e de pasta de papel foram caracterizados em detalhe, com vista à sua valorização. A fração fenólica das cascas de Eucalyptus globulus, E. grandis, E. urograndis e E. maidenii, bem como da cortiça de Quercus suber e resíduos provenientes da sua exploração, nomeadamente, o pó de cortiça e os condensados negros, foi obtida por processos convencionais de extração sólido-líquido. No caso da casca de E. globulus, foi ainda avaliado o potencial de metodologias “verdes” no processo de extração de compostos fenólicos, usando extração com CO2 supercrítico. Esta técnica foi otimizada com recurso a metodologias de superfície de resposta. Na identificação e quantificação dos compostos fenólicos foi usada cromatografia líquida de alta resolução aliada a técnicas de espectrometria de massa. O teor de fenólicos totais foi ainda determinado pelo método de Folin- Ciocalteu, essencialmente para efeitos comparativos. A caracterização da fração fenólica de cada extrato foi ainda complementada com a análise da atividade antioxidante, usando o radical 2,2-difenil-1-picrilhidrazilo (DPPH). Foram identificados trinta compostos fenólicos na casca de E. globulus, 17 deles referenciados pela primeira vez como seus constituintes, nomeadamente os ácidos quínico, di-hidroxifenilacétic, cafeico e metil-elágico, bis-hexahidroxidifenoil( HHDP)-glucose, galoil- bis-HHDP-glucose, galoil-HHDPglucose, isoramnetina—hexosídeo, quercetina-hexosídeo, ácido metil-elágicopentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, mearnsetina, floridzina, mearnsetina-hexosídeo, luteolina e uma proantocianidina B. Neste trabalho, foi estudada pela primeira vez a composição fenólica das cascas de E. grandis, E. urograndis e E. maidenii. Treze, doze e vinte e quatro compostos fenólicos foram identificados nas cascas de E. grandis, E. urograndis e E. maidenii, respetivamente. Entre estes compostos encontram-se os ácidos quínico, gálico, metilgálico, protocatequínico, clorogénico e elágico, catequina, galoil-bis-HHDP-glucose, digaloilglucose, epicatequina, quercetina-glucoronídeo, di-hidroxiisopropilcromona- hexosídeo, isoramnetina-hexosídeo, ácido elágicoramnosídeo, taxifolina, quercetina-hexosídeo, di-hidroxi- (metilpropil)isopropilcromona-hexosídeo, ácido metil-elágico-pentosídeo, miricetina-ramnosídeo, isoramnetina-ramnosídeo, aromadendrina-ramnosídeo, mearnsetina, mearnsetina-hexosídeo, eriodictiol, quercetina, isoramnetina e naringenina. A análise da fração fenólica da cortiça permitiu identificar vinte e dois compostos fenólicos, dez deles referenciados pela primeira vez como seus constituintes, nomeadamente, os ácidos quínico, salicílico, p-hidroxifenillático e metilgálico, ácido carboxílico da brevifolina, eriodictiol, naringenina, um éster isoprenílico do ácido cafeico, isoramnetina-ramnosídeo e isoramnetina. No pó de cortiça industrial foram identificados dezasseis compostos fenólicos, nomeadamente os ácidos quínico, gálico, protocatequínico, cafeico, ferúlico, elágico e metilgálico, esculetina, ácido carboxílico da brevifolina, coniferaldeído, um éster isoprenílico do ácido cafeico, uma dilactona do ácido valoneico, ácido elágico-pentosídeo, ácido elágico-ramnosídeo, isoramnetinaramnosídeo e isoramnetina. Destes, apenas o ácido elágico foi previamente referenciado como componente do pó de cortiça. Do mesmo modo, treze compostos fenólicos foram identificados no condensado negro, doze deles referenciados pela primeira vez como seus constituintes. São eles os ácidos quínico, gálico, p-hidroxifenil-láctico, protocatequínico, p-coumarico, cafeico e elágico, vanilina, esculetina, coniferaldeído, um éster isoprenílico do ácido cafeico e o eriodictiol. A extração supercrítica de compostos fenólicos da casca de eucalipto permitiu não só verificar os parâmetros que afetam a qualidade e quantidade finais dos extratos, como também obter os valores ótimos para estes parâmetros. Esta extração mostrou ainda ser bastante seletiva para determinados grupos de compostos fenólicos, como as flavanonas eriodictiol e naringenina e para o flavonol O-metilado isoramnetina. Este é também o primeiro estudo envolvendo a determinação da atividade antioxidante de extratos da cortiça e dos resíduos da sua exploração, bem como da casca de E. grandis, E. urograndis e E. maidenii. A vasta gama de compostos fenólicos identificados em cada extrato analisado, assim como as prominentes atividades antioxidantes, todas na mesma gama de valores do bem conhecido antioxidante comercial, ácido ascórbico, são claramente um grande contributo para a valorização destes subprodutos industriais.

Spectroscopic properties and electronic structures of 17-electron half-sandwich ruthenium acetylide complexes, [Ru(CCAr)(L2)Cp′]+ (Ar=phenyl, p-tolyl, 1-naphthyl, 9-anthryl; L2=(PPh3)2, Cp′=Cp; L2=dppe; Cp′=Cp∗)

A series of half-sandwich bis(phosphine) ruthenium acetylide complexes [Ru(C CAr)(L-2)Cp'] (Ar = phenyl, p-tolyl, 1-naphthyl, 9-anthryl; L2 = (PPh3)(2), Cp' = Cp; L-2 = dppe; Cp' = Cp*) have been examined using electrochemical and spectroelectrochemical methods. One-electron oxidation of these complexes gave the corresponding radical cations [Ru(C CAr)(L2)Cp'](+). Those cations based on Ru(dppe)Cp*, or which feature a para-tolyl acetylide substituent, are more chemically robust than examples featuring the Ru(PPh3)(2)Cp moiety, permitting good quality UV-Vis-NIR and IR spectroscopic data to be obtained using spectroelectrochemical methods. On the basis of TD DFT calculations, the low energy (NIR) absorption bands in the experimental electronic spectra for most of these radical cations are assigned to transitions between the beta-HOSO and beta-LUSO, both of which have appreciable metal d and ethynyl pi character. However, the large contribution from the anthryl moiety to the frontier orbitals of [Ru(C CC14H9)(L2)CP'](+) suggests compounds containing this moiety should be described as metal-stabilised anthryl radical cations.

Synthesis and Electronic Structure of Dissymmetrical, Naphthalene-Bridged Sandwich Complexes [Cp′Fe(μ‑C10H8)MCp*]x (x = 0, +1; M =Fe, Ru; Cp′ = η5‑C5H2‑1,2,4‑tBu3; Cp* = η5‑C5Me5)

The dissymmetrical naphthalene-bridged complexes [Cp′Fe(μ-C10H8)FeCp*] (3; Cp* = η5-C5Me5, Cp′ = η5-C5H2-1,2,4-tBu3) and [Cp′Fe(μ-C10H8)RuCp*] (4) were synthesized via a one-pot procedure from FeCl2(thf)1.5, Cp′K, KC10H8, and [Cp* FeCl(tmeda)] (tmeda = N,N,N′,N′- tetramethylethylenediamine) or [Cp*RuCl]4, respectively. The symmetrically substituted iron ruthenium complex [Cp*Fe(μ-C10H8)RuCp*] (5) bearing two Cp* ligands was prepared as a reference compound. Compounds 3−5 are diamagnetic and display similar molecular structures, where the metal atoms are coordinated to opposite sides of the bridging naphthalene molecule. Cyclic voltammetry and UV/vis spectroelectrochemistry studies revealed that neutral 3−5 can be oxidized to monocations 3+−5+ and dications 32+−52+. The chemical oxidation of 3 and 4 with [Cp2Fe]PF6 afforded the paramagnetic hexafluorophosphate salts [Cp′Fe(μ-C10H8)FeCp*]PF6 ([3]PF6) and [Cp′Fe(μ-C10H8)RuCp*]PF6 ([4]PF6), which were characterized by various spectroscopic techniques, including EPR and 57Fe Mössbauer spectroscopy. The molecular structure of [4]PF6 was determined by X-ray crystallography. DFT calculations support the structural and spectroscopic data and determine the compositions of frontier molecular orbitals in the investigated complexes. The effects of substituting Cp* with Cp′ and Fe with Ru on the electronic structures and the structural and spectroscopic properties are analyzed.

CP-MLR Directed QSAR Studies on the Antimycobacterial Activity of Functionalised Alkenols - Topological Descriptors in Modeling the Activity

The antimycobacterial activity of nitro/ acetamido alkenol derivatives and chloro/ amino alkenol derivatives has been analyzed through combinatorial protocol in multiple linear regression (CP-MLR) using different topological descriptors obtained from Dragon software. Among the topological descriptor classes considered in the study, the activity is correlated with simple topological descriptors (TOPO) and more complex 2D autocorrelation descriptors (2DAUTO). In model building the descriptors from other classes, that is, empirical, constitutional, molecular walk counts, modified Burden eigenvalues and Galvez topological charge indices have made secondary contribution in association with TOPO and / or 2DAUTO classes. The structure-activity correlations obtained with the TOPO descriptors suggest that less branched and saturated structural templates would be better for the activity. For both the series of compounds, in 2DAUTO the activity has been correlated to the descriptors having mass, volume and/ or polarizability as weighting component. In these two series of compounds, however, the regression coefficients of the descriptors have opposite arithmetic signs with respect to one another. Outwardly these two series of compounds appear very similar. But in terms of activity they belong to different segments of descriptor-activity profiles. This difference in the activity of these two series of compounds may be mainly due to the spacing difference between the C1 (also C6) substituents and rest of the functional groups in them.

Cyanide Compounds

Chapter 4, “Cyanide Compounds,” illustrates an explosively developing research theme in which the cyanide ligand is used as a linking agent for the designed assembly of polynuclear metal complexes. Syntheses of several basic building blocks, such as K3[Cr(CN)6],Cr(Me3tacn)(CN)3,K4[Mo(CN)8],Na[W(CO)5CN],K[CpFe(CO)(CN)2],[NEt4][Cp*Rh(CN)3],[Fe4(bpy)8(μ-CN)4][PF6]4,. are given here. These units may be used in several ways to construct polynuclear compounds. One approach involves a hexacyanometalate core decorated with peripheral metal centers, e.g., [{Cu(tpa)(CN)}6Fe][ClO4]8. or [Cr{CNNi(tetren)}6][ClO4]9. An octacyanometalate unit can lead to higher nuclearity condensed compounds, as in [Co{Co(MeOH)3}8(μ-CN)30{Mo(CN)3}6]. Alternatively, a cluster core may be substituted with cyano complexes as ligands, as in [PPh4]2[Fe4S4{NCW(CO)5}4]. If there are two cis cyano ligands on the building block, then quadrilateral or square structures often result, as in {CpFe(CO(μ-CN)2Cu(PCy3)}2 and [Fe2Cu2(bpy)6(μ-CN)4][PF6]4 However, if there are three adjacent cyano ligands, then cubic cages may be constructed as in [(CpCo)4(Cp*Rh)4(μ-CN)12][PF6]4.

Zero- one- and two-dimensional hydrogen-bonded structures in the 1:1 proton-transfer compounds of 4,5-dichlorophthalic acid with the monocyclic heteroaromatic Lewis bases 2-aminopyrimidine, nicotinamide and isonicotinamide

The structures of the anhydrous 1:1 proton-transfer compounds of 4,5-dichlorophthalic acid (DCPA) with the monocyclic heteroaromatic Lewis bases 2-aminopyrimidine, 3-(aminocarboxy) pyridine (nicotinamide) and 4-(aminocarbonyl) pyridine (isonicotinamide), namely 2-aminopyrimidinium 2-carboxy-4,5-dichlorobenzoate C4H6N3+ C8H3Cl2O4- (I), 3-(aminocarbonyl) pyridinium 2-carboxy-4,5-dichlorobenzoate C6H7N2O+ C8H3Cl2O4- (II) and the unusual salt adduct 4-(aminocarbonyl) pyridinium 2-carboxy-4,5-dichlorobenzoate 2-carboxymethyl-4,5-dichlorobenzoic acid (1/1/1) C6H7N2O+ C8H3Cl2O4-.C9H6Cl2O4 (III) have been determined at 130 K. Compound (I) forms discrete centrosymmetric hydrogen-bonded cyclic bis(cation--anion) units having both R2/2(8) and R2/1(4) N-H...O interactions. In compound (II) the primary N-H...O linked cation--anion units are extended into a two-dimensional sheet structure via amide-carboxyl and amide-carbonyl N-H...O interactions. The structure of (III) reveals the presence of an unusual and unexpected self-synthesized methyl monoester of the acid as an adduct molecule giving one-dimensional hydrogen-bonded chains. In all three structures the hydrogen phthalate anions are