934 resultados para Controlled environmental Report
Resumo:
Life cycle of Tenuipalpus heveae Baker (Acari, Tenuipalpidae) on leaflets from three rubber tree clones. The biological cycle of Tenuipalpus heveae Baker, 1945 (Tenuipalpidae), a potential rubber tree pest mite, was studied by the observation of individuals reared on leaflets of the clones GT 1, PB 235 and RRIM 600, in controlled environmental conditions. Three daily observations were done of 60 eggs on leaflets from each clone in order to verify the development of immature stages and the female oviposition. The fertility life table was constructed based in the collected data. Mites reared on PB 235 had faster rate of development, requiring less time in days, to double its population in number (TD), and had the highest values for egg production, female longevity, net reproductive rate (Ro), intrinsic rate of natural increase (r m) and finite rate of increase (λ). Lower reproductive values and the longest time necessary to reach adult stage were recorded for the mites on GT 1. In all studied clones, the deutonymphal phase had the highest viability, while the larval phase had the lowest, highlighted by the survivorship curve that indicated high mortality during this life stage. The clone PB 235 allowed the most suitable conditions for the development of T. heveae, followed by RRIM 600, while GT 1 was the less suitable substratum to rear this mite species.
Resumo:
This study aimed at evaluating the biological characteristics and the capacity of parasitism of a Trichogramma pretiosum Riley, 1869 (Hymenoptera, Trichogrammatidae) strain (T. pretiosum RV) collected in Rio Verde County, State of Goiás, Brazil. The study was carried out on eggs of Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera, Noctuidae) and conducted under controlled environmental conditions at different constant temperatures. The biological parameters determined were: developmental time (egg-adult; days); emergence (%); sex ratio; number of progeny/egg; number of generation/year; thermal constant (K); temperature threshold (Tb); daily number of parasitized eggs; cumulative parasitism (%); total number of eggs parasitized by T. pretiosum; and female longevity. To study the T. pretiosum parasitism capacity, 20 S. frugiperda eggs (< 24 h old) were placed into 8.0 cm x 2.0 cm glass vials containing one female (< 24 h old) each. Trials were carried out in a completely randomized experimental design, with 20 replications at each temperature. The environmental chambers (BOD type) were set at 18ºC, 20ºC, 22ºC, 25ºC, 28ºC and 32ºC ± 1ºC, 70 ±10% relative humidity, and 14/10 h (L:D) photoperiod. The eggs of S. frugiperda were replaced daily until parasitoid death. Results have shown an inverse correlation between developmental time and temperature, with statistically significant differences among means, except at 25ºC and 28ºC (10 days). Parasitoid emergence (%) was also influenced by temperature. The lowest percent emergence was observed at 32ºC, and the highest ones at 18ºC and 20ºC temperatures. The temperature did not affect T. pretiosum sex ratio and number of parasitoids per egg, thus allowing changes in the temperature to control insect mass production in the laboratory to meet the needs for field releases.
Resumo:
Interaction betweeen Telenomus remus and Trichogramma pretiosum in the management of Spodoptera spp. The use of egg parasitoids is a promising strategy for Integrated Pest Management (IPM), but different species of parasitoids have greater or lesser control efficiency, depending on the pest species. Recently, not only Anticarsia gemmatalis and Pseudoplusia includens but also Spodoptera cosmioides and S. eridania have been among the key Lepidoptera larvae attacking soybeans. This study evaluated the combination of Telenomus remus and Trichogramma pretiosum for parasitism of eggs of the Spodoptera complex, for better control efficiency and broader spectrum of action among the key pests of soybeans. The experiment was carried out under controlled environmental conditions (25 ± 2ºC; 70 ± 10% RH; and 14 h photophase) in a completely randomized experimental design with seven treatments and 10 replicates with S. frugiperda, S. cosmioides and S. eridania eggs. Each replicate consisted of one egg mass of each Spodoptera species, with approximately 100 eggs offered to the parasitoids. The treatments were: 1) 10 females of T. pretiosum; 2) nine females of T. pretiosum and one female of T. remus; 3) eight females of T. pretiosum and two females of T. remus; 4) seven females of T. pretiosum and three females of T. remus; 5) six females of T. pretiosum and four females of T. remus; 6) five females of T. pretiosum and five females of T. remus, and 7) 10 females of T. remus. The parameter evaluated was the percentage of parasitized eggs. Results showed that treatments combining both parasitoid species with only 1 T. remus for each 9 T. pretiosum (10%) and only 2 T. remus for each 8 T. pretiosum (20%) were enough to significantly increase the parasitism observed on eggs of S. cosmioides and S. frugiperda, respectively. This association of T. pretiosum and T. remus in different proportions is very promising for biological control in IPM programs because it provides wide spectrum of control.
Resumo:
Host preference of the egg parasitoids Telenomus remus and Trichogramma pretiosum in laboratory. This research aimed to evaluate the host preference of the egg parasitoids Telenomus remus and Trichogramma pretiosum. Trials were carried out in laboratory, under controlled environmental conditions (25 ± 2ºC temperature; 70 ± 10% RH; and 14 h photophase). The parasitoid searching behavior was evaluated based on the distribution (%) of eggs parasitized by each parasitoid, on egg masses of each host species. Results showed the host preference of T. remus by Spodoptera cosmioides eggs. T. pretiosum, reared in A. gemmatalis eggs, choose to parasitize always eggs of the host where the parasitoid had been reared. The egg preference was not observed when T. pretiosum was reared in S. frugiperda eggs. These results show that, in general, host preference of T. remus is less influenced by the host where it is developed than T. pretiosum. Host preference is an important parameter for biological control programs because more than one pest species may occur in the field, different from those where they were reared in the laboratory.
Resumo:
No impact of Bt soybean that express Cry1Ac protein on biological traits of Euschistus heros (Hemiptera, Pentatomidae) and its egg parasitoid Telenomus podisi (Hymenoptera, Platygastridae). Biological traits of the stink bug Euschistus heros and its main biological control agent Telenomus podisi were evaluated under controlled environmental conditions (25 ± 2ºC; 60 ± 10% RH; and 14/10 h photoperiod) by placing first instar nymphs into Petri dishes with pods originating from two soybean isolines (Bt-soybean MON 87701 × MON 89788, which expresses the Cry1Ac protein, and its near non-Bt isoline A5547) where they remained until the adult stage. Due to gregarious behavior exhibited by first instar nymphs, they were individualized only when at the second instar. Adults were separated by sex and weighed, and pronotum width of each individual was subsequently measured. They were placed into plastic boxes containing soybean grains of the same soybean isoline as food source. Egg viability and female fecundity were assessed in adult individuals. Adult females of T. podisi (up to 24h old) were placed with eggs of E. heros from mothers reared on both soybean isolines. Nymphal development time, insect weight, pronotum width, sex ratio, female fecundity, and egg viability (% emergence) of Euschistus heros did not differ between treatments. Eggto-adult development time, female longevity, sex ratio, and percentage of parasitized eggs were not impacted by the Bt-soybean (expressing Cry1Ac protein). Results indicate that the Bt-soybean, MON 87701 × MON 89788, has no direct significant impact on the two studied species.
Resumo:
The objective of this work was to evaluate the ability of several P-solubilizing fungi to solubilize aluminum phosphate and Araxá apatite as well as the synergism between the P-solubilizing fungus, PSF 7, and arbuscular mycorrhizal fungi to promote clover growth amended with aluminum phosphate. Two experiments were carried out, the first under laboratory conditions and the second in a controlled environmental chamber. In the first experiment, PSF 7, PSF 9, PSF 21 and PSF 22 isolates plus control were incubated in liquid medium at 28ºC for eight days. On the 2nd, 4th and 8th day of incubation, pH and soluble P were determined. In the second experiment, clover was sowed in plastic pots containing 300 g of sterilized substrate amended with aluminum phosphate, 3 g L-1, in presence and absence of PSF 7 isolate and arbuscular mycorrhizal fungi. A completely randomized design, in factorial outline 2x2 (presence and absence of PSF 7 and arbuscular mycorrhizal fungi) and five replicates were used. In the first experiment, higher P content was detected in the medium containing aluminum phosphate. PSF 7 is the best fungi isolate which increases aluminum solubilization with major tolerance to Al3+. Clover growth was stimulated by presence of PSF 7 and arbuscular mycorrhizal fungi. There is synergism between microorganisms utilized to improve plant nutrition.
Resumo:
Diplomityössä tarkastellaan ympäristöraportointia yrityksen ympäristöviestinnässä.Työn kirjallisuusosuudessa syvennytään ympäristöraporttien toteutukseen, tavoitteisiin, mahdollisuuksiin sekä raportointiohjeisiin ja -periaatteisiin. Työn kirjallisuusosassa käsitellään myös ympäristöjohtamista ja yrityksen sidosryhmiä. Diplomityön kirjallisuusosan ja yrityksen ohjauksen perusteella Joensuun Vedelle on kehitetty ympäristöraportointimalli, jota käyttäen yritys voi tehdä vuosittaista ympäristöraportointiaan. Ympäristöraportointimallin laadinta perustui erilaisiin raportointimalleihin, raportointiperiaatteisiin ja raportointiohjeisiin, kuten muiden muassa Global Reporting Initiativen (GRI) vapaaehtoiseen yhteiskuntavastuun raportointiohjeistoon ja Kirjanpitolautakunnan (KILA) yleisohjeeseen ympäristöasioiden kirjaamisesta, laskennasta ja esittämisestä tilinpäätöksessä. Joensuun Vedelle laaditunympäristöraportointimallin tavoitteena oli luoda laitokselle ympäristöraportti,joka sisältää merkittävimmät ympäristönäkökohdat, taloudellista vastuuta käsittelevän ympäristötilinpäätöksen sekä tietoa tärkeistä sosiaalisen vastuun asioista. Ympäristöraportin sisältämän tiedon kokoamisella haluttiin myös saada kokonaisvaltaista näkemystä, vuoden 2005 Joensuun, Kiihtelysvaaran ja Tuupovaaran kuntaliitoksen takia laajentuneen, Joensuun Veden toiminnan ympäristövaikutuksista. Diplomityössä on esitetty Joensuun Veden vuoden 2005 ympäristöraportin kokoamisenvaiheet sekä tulokset. Ympäristöraportointimalli täytti sille asetetut tavoitteet. Ympäristöraportin sisältöä tulee kuitenkin jatkossa kehittää sekä raportoitavan aineiston alkuperäisen dokumentoinnin osalta että sidosryhmien mielipiteidenja vaatimusten mukaisesti.
Resumo:
Ympäristöjärjestelmät auttavat organisaatioiden toiminnan ympäristövaikutuksien hallinnassa. ISO 14001 -standardi antaa yritykselle työkalun ympäristöjärjestelmän rakentamiseen, ylläpitämiseen ja kehittämiseen. Ympäristöjärjestelmälle voidaan hakea ulkopuolisen tarkastajan myöntämä hyväksyntä eli sertifikaatti, jota sidosryhmät voivat vaatia osoitukseksi ympäristöasioiden hoidosta. Sidosryhmien kasvava ympäristökiinnostus lisää yrityksien paineita kehittää ympäristöraportointiaan. Yrityksen yhteiskuntavastuuseen sisältyvien taloudellisen, sosiaalisen ja ympäristövastuun raportointiin kehitetty kansainvälinen GRI-raportointiohjeisto on saavuttanut yleisesti hyväksytyn raportointiviitekehyksen aseman ja sitä voidaan hyödyntää myös pelkän ympäristövastuun raportoinnissa. Tässä diplomityössä tarkastellaan yrityksen ympäristöasioiden hallintaa ja ympäristöraportointia. Tavoitteena on suunnitella ja osittain toteuttaa elintarviketeollisuuden yritykselle ISO 14001 -standardin mukainen ympäristöjärjestelmä. Toisena tavoitteena on suunnitella yrityksen ympäristöraportoinnin aloittamista ja antaa GRI-ohjeiston pohjalta ehdotus asioista, joita yrityksen ympäristöraportti voisi raportoinnin alkuvaiheessa sisältää. Työn lopussa annetaan ehdotus jatkotoimenpiteistä, joilla ympäristöjärjestelmä saadaan sertifiointivalmiiksi ja miten ympäristöraportointiprosessia voidaan edistää.
Resumo:
The influence of climatic variations on fructan content in tropical regions is not well known. The present study deals with the effects of temperature on fructan contents in rhizophores of plants of Vernonia herbacea, a native species from the Brazilian cerrado vegetation. Intact plants and fragmented rhizophores were subjected to different temperatures under natural and controlled environmental conditions. Rhizophores of plants in pre-dormant stage (aerial parts showing some yellowish leaves) presented higher fructan content at 5oC than those kept at 25oC, whereas in dormant plants (aerial parts absent) temperature treatments did not affect fructan contents. Fragmented rhizophores obtained from dormant plants presented higher levels of fructo-polysaccharides at the end of the experiment than at the beginning of the treatment, regardless of the temperature they were stored, whereas fragments obtained from vegetative plants showed a decrease in fructan content under the same treatments. It was concluded that variations observed in fructan contents are related to the phenological state of the plants prior to the treatment rather than to extraneous temperatures they are subjected to during this stage.
Resumo:
The study was carried out to clarify the nature of symptomless infection by Botrytis cinerea and to what extent it differs from aggressive necrotic infection in Lactuca sativa (lettuce) and Arabidopsis thaliana. Symptomless plants were produced by dry spore inoculation in plants growing in controlled environmental conditions or in glasshouses. Plating out of surface-disinfected and non-surface-disinfected samples of inoculated, apparently healthy, plants on selective medium revealed that the fungus was spreading from the initial inoculation site to newly developing plant organs both internally and externally. Similar findings were obtained in microscope experiments in which host plants were inoculated with GFP labelled B. cinerea and symptomless spreading was monitored under confocal laser scanning microscope. Spore germination on leaf surface was followed by development of sub-cuticular vesicles and plant cell damage in the infected epidermal cell and a few nearby cells. Sparsely branched long hyphae arose from the vesicles and spread on the leaf surface; spread was mostly on the outer surface of the epidermal layer but occasionally below the cuticle or epidermal cells. In the late symptomless phase, mycelium arising from single vesicles formed several mycelial networks on leaves. Experiments were carried out to compare the extent of gene expression in symptomless and necrotic infections, using RT-qPCR. Expression of selected genes was quantified in tissue samples based on the amount of mRNA of the respective genes found. In both host species, the mRNA concentration of signalling genes bcg1, bmp1 and calcineurin, and the pathogenicity genes bcsod1 and bcpg1 were similar to or slightly greater in symptomless samples than in necrotic samples. The mRNA of the signalling gene bac and pathogenicity genes bcbot1 and bcnep1, were not detected or detected in lower abundance than in necrosis. In lettuce, the leaves developing distant from the site of inoculation showed similar results to A. thaliana, but in healthy leaves close to the site of inoculation mRNA concentrations of bac and bcnep1 were similar to necrotic samples. Thus, in both host species, the fungus grew along with the plant and moved to newly growing plant parts without producing symptoms; during this growth some pathogenicity genes were less expressed than in necrotic infection.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The application of composite materials and in particular the fiber-reinforced plastics (FRP) has gradually conquered space from the so called conventional materials. However, challenges have arisen when their application occurs in equipment and mechanical structures which will be exposed to harsh environmental conditions, especially when there is the influence of environmental degradation due to temperature, UV radiation and moisture in the mechanical performance of these structures, causing irreversible structural damage such as loss of dimensional stability, interfacial degradation, loss of mass, loss of structural properties and changes in the damage mechanism. In this context, the objective of this thesis is the development of a process for monitoring and modeling structural degradation, and the study of the physical and mechanical properties in FRP when in the presence of adverse environmental conditions (ageing). The mechanism of ageing is characterized by controlled environmental conditions of heated steam and ultraviolet radiation. For the research, it was necessary to develop three polymer composites. The first was a lamina of polyester resin reinforced with a short glass-E fiber mat (representing the layer exposed to ageing), and the other two were laminates, both of seven layers of reinforcement, one being made up only of short fibers of glass-E, and the other a hybrid type reinforced with fibers of glass-E/ fibers of curaua. It should be noted that the two laminates have the lamina of short glass-E fibers as a layer of the ageing process incidence. The specimens were removed from the composites mentioned and submitted to environmental ageing accelerated by an ageing chamber. To study the monitoring and modeling of degradation, the ageing cycles to which the lamina was exposed were: alternating cycles of UV radiation and heated steam, a cycle only of UV radiation and a cycle only of heated steam, for a period defined by norm. The laminates have already undergone only the alternating cycle of UV and heated steam. At the end of the exposure period the specimens were subjected to a structural stability assessment by means of the developed measurement of thickness variation technique (MTVT) and the measurement of mass variation technique (MMVT). Then they were subjected to the mechanical tests of uniaxial tension for the lamina and all the laminates, besides the bending test on three points for the laminates. This study was followed by characterization of the fracture and the surface degradation. Finally, a model was developed for the composites called Ageing Zone Diagram (AZD) for monitoring and predicting the tensile strength after the ageing processes. From the results it was observed that the process of degradation occurs Abstract Raimundo Nonato Barbosa Felipe xiv differently for each composite studied, although all were affected in certain way and that the most aggressive ageing process was that of UV radiation, and that the hybrid laminated fibers of glass-E/curaua composite was most affected in its mechanical properties
Resumo:
Predation of zoeas by megalopae of Ucides cordatus is frequently observed in the laboratory during larval rearing, a phenomenon that could considerably reduce the output of larviculture. Experiments were carried out in the present study to assess how the survivorship of larvae at the end of the larviculture is influenced by cannibalism by megalopae on the larvae of earlier stages, as well as on other megalopae. In addition, tests were performed to assess whether the adoption of different feeding protocols can decrease cannibalism rates. Experiments were carried out in plastic vials containing ocean water (salinity 25 g L-1) under controlled environmental conditions (26 degrees C and 16:8 h LD photoperiod). An ensemble analysis of all the developmental stages indicated that zoeal mortality rates were significantly higher in the presence of megalopae, a result that is consistent with cannibalism by megalopae. However, separate analysis for each developmental stage indicated that only zoea IV, V and VI show reduced survivorship. No cannibalism was detected among megalopae. Food supplementation using Artemia sp. at a density of 6 nauplii mL(-1) proved to be successful in reducing cannibalism rates, whereas supplementation at a lower density (0.3 nauplii mL(-1)) failed to show such an effect. The implications of these results for the larviculture of U. cordatus are discussed.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
This study aimed at determining the minimum time required for the penetration of Salmonella Heidelberg inside the eggs after contact with contaminated material. Recently-collected brown and white eggs from laying hens between 45-50 weeks of age, reared in a commercial poultry house, were artificially contaminated by contact with wood shavings moistened with liquid inoculum of Salmonella Heidelberg in stationary-growth phase (10³-10(4) CFU g-1). According to type (white or brown), eggs were distributed into three different groups, with four replicates each: negative control group (no artificial contamination), positive control group (analyzed externally immediately after contamination and internally after the maximum storage period of the test group) and test group. Eggs were stored at controlled environmental temperature varying from 25ºC to 30ºC. In the test group, eggs contents (yolk and albumen) were pooled and analyzed after 1:00, 1:30, 2:00, 2:30, 3:00, 3:30, and 4:00 hours after contamination for the presence of Salmonella Heidelberg in 25g of this pool. The experimental unit consisted of five eggs in each test. The analysis protocol included pre-enrichment, selective enrichment, plating on selective agar, and biochemical and serological tests. The results obtained were submitted to logistic regression, which indicated that the presence of Salmonella Heidelberg was verified after 2:16 h and 2:44 h of contact with white and brown eggs, respectively.