Non-resorbable glass fibre-reinforced composite with porous surface as bone substitute material: Experimental studies in vitro and in vivo focused on bone-implant interface

The development of load-bearing osseous implant with desired mechanical and surface properties in order to promote incorporation with bone and to eliminate risk of bone resorption and implant failure is a very challenging task. Bone formation and resoption processes depend on the mechanical environment. Certain stress/strain conditions are required to promote new bone growth and to prevent bone mass loss. Conventional metallic implants with high stiffness carry most of the load and the surrounding bone becomes virtually unloaded and inactive. Fibre-reinforced composites offer an interesting alternative to metallic implants, because their mechanical properties can be tailored to be equal to those of bone, by the careful selection of matrix polymer, type of fibres, fibre volume fraction, orientation and length. Successful load transfer at bone-implant interface requires proper fixation between the bone and implant. One promising method to promote fixation is to prepare implants with porous surface. Bone ingrowth into porous surface structure stabilises the system and improves clinical success of the implant. The experimental part of this work was focused on polymethyl methacrylate (PMMA) -based composites with dense load-bearing core and porous surface. Three-dimensionally randomly orientated chopped glass fibres were used to reinforce the composite. A method to fabricate those composites was developed by a solvent treatment technique and some characterisations concerning the functionality of the surface structure were made in vitro and in vivo. Scanning electron microscope observations revealed that the pore size and interconnective porous architecture of the surface layer of the fibre-reinforced composite (FRC) could be optimal for bone ingrowth. Microhardness measurements showed that the solvent treatment did not have an effect on the mechanical properties of the load-bearing core. A push-out test, using dental stone as a bone model material, revealed that short glass fibre-reinforced porous surface layer is strong enough to carry load. Unreacted monomers can cause the chemical necrosis of the tissue, but the levels of leachable resisidual monomers were considerably lower than those found in chemically cured fibre-reinforced dentures and in modified acrylic bone cements. Animal experiments proved that surface porous FRC implant can enhance fixation between bone and FRC. New bone ingrowth into the pores was detected and strong interlocking between bone and the implant was achieved.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

The role of PPARgamma in cartilage growth and development using cartilage-specific PPARgamma knockout mice

Le cartilage est un tissu conjonctif composé d’une seule sorte de cellule nommée chondrocytes. Ce tissu offre une fondation pour la formation des os. Les os longs se développent par l'ossification endochondral. Ce processus implique la coordination entre la prolifération, la différenciation et l'apoptose des chondrocytes, et résulte au remplacement du cartilage par l'os. Des anomalies au niveau du squelette et des défauts liés à l’âge tels que l’arthrose (OA) apparaissent lorsqu’il y a une perturbation dans l’équilibre du processus de développement. À ce jour, les mécanismes exacts contrôlant la fonction et le comportement des chondrocytes pendant la croissance et le développement du cartilage sont inconnus. Le récepteur activateur de la prolifération des peroxysomes (PPAR) gamma est un facteur de transcription impliqué dans l'homéostasie des lipides. Plus récemment, son implication a aussi été suggérée dans l'homéostasie osseuse. Cependant, le rôle de PPARγ in vivo dans la croissance et le développement du cartilage est inconnu. Donc, pour la première fois, cette étude examine le rôle spécifique de PPARγ in vivo dans la croissance et le développement du cartilage. Les souris utilisées pour l’étude avaient une délétion conditionnelle au cartilage du gène PPARγ. Ces dernières ont été générées en employant le système LoxP/Cre. Les analyses des souris ayant une délétion au PPARγ aux stades embryonnaire et adulte démontrent une réduction de la croissance des os longs, une diminution des dépôts de calcium dans l’os, de la densité osseuse et de la vascularisation, un délai dans l’ossification primaire et secondaire, une diminution cellulaire, une perte d’organisation colonnaire et une diminution des zones hypertrophiques, une désorganisation des plaques de croissance et des chondrocytes déformés. De plus, la prolifération et la différenciation des chondrocytes sont anormales. Les chondrocytes et les explants isolés du cartilage mutant démontrent une expression réduite du facteur de croissance endothélial vasculaire (VEGF)-A et des éléments de production de la matrice extracellulaire. Une augmentation de l’expression de la métalloprotéinase matricielle (MMP)-13 est aussi observée. Dans les souris âgées ayant une délétion au PPARγ, y est aussi noté des phénotypes qui ressemblent à ceux de l’OA tel que la dégradation du cartilage et l'inflammation de la membrane synoviale, ainsi qu’une augmentation de l’expression de MMP-13 et des néoépitopes générés par les MMPs. Nos résultats démontrent que le PPARγ est nécessaire pour le développement et l’homéostasie du squelette. PPARγ est un régulateur essentiel pour la physiologie du cartilage durant les stades de croissance, de développement et de vieillissement.

Characterization of in vivo vertebral growth modulation by shape memory alloy staples on a porcine model for the correction of the scoliosis

La recherche de nouvelles voies de correction de la scoliose idiopathique a une longue histoire. Le traitement conventionnel de la scoliose idiopathique est présenté par le port du corset ou par la correction opératoire de la déformation. Depuis leur introduction, les deux méthodes ont prouvé leur efficacité. Cependant, malgré des caractéristiques positives évidentes, ces méthodes peuvent causer un nombre important d'effets indésirables sur la santé du patient. Les techniques sans fusion pour le traitement de la scoliose semblent être une alternative perspective de traitement traditionnel, car ils apportent moins de risques et des complications chirurgicales que les méthodes conventionnelles avec la conservation de la mobilité du disque intravertébral. Cependant, l'utilisation de techniques mentionnées exige une connaissance profonde de la modulation de croissance vertébrale. L'objectif principal de la présente étude est d'estimer le potentiel d'agrafes à l’AMF de moduler la croissance des vertèbres porcines en mesurant la croissance osseuse sur la plaque de croissance de vertèbres instrumentées en comparaison avec le groupe contrôle. La méthode est basée sur la loi de Hueter-Volkmann. Nous avons choisi NiTi agrafes à l’AMF pour notre étude et les porcs de race Landrace comme un animal expérimental. Les agrafes ont été insérés sur 5 niveaux thoracique de T6 à T11. En outre, les radiographies ont été prises toutes les 2 semaines. La présence d'agrafes en alliage à mémoire de forme a produit la création de courbes scoliotiques significatives dans 4 de 6 animaux chargés et le ralentissement considérable de la croissance osseuse (jusqu'à 35,4%) comparativement aux groupes contrôle et sham. L'étude a démontré in vivo le potentiel d'agrafes en alliage à mémoire de formes de moduler la croissance des vertèbres en créant des courbes scoliotiques sur les radiographies et en ralentissant le taux de croissance sur les plaques de croissance instrumenté. La position précise de l'agrafe est essentielle pour la modulation de croissance osseuse et le développement de la scoliose expérimentale.

Bone Formation Following Implantation of Titanium Sponge Rods into Humeral Osteotomies in Dogs: A Histological and Histometrical Study

Background: Titanium (Ti) is widely proven to enhance bone contact and growth on its surface. It is expected that bone defects could benefit from Ti to promote healing and to increase strength of the implanted area. Purpose: The present study aimed at comparing the potential of porous Ti sponge rods with synthetic hydroxyapatite (HA) for the healing of bone defects in a canine model. Material and Methods: Six mongrel dogs were submitted to three trephined osteotomies of 6.0 x 4.0 mm in one humerus and after 2 months another three osteotomies were performed in the contralateral humerus. A total of 36 defects were randomly filled either with Ti foam, particulate HA, or coagulum (control). The six animals were killed 4 months after the first surgery for histological and histometrical analysis. Results: The Ti-foam surface was frequently found in intimate contact with new bone especially at the defect walls. Control sites showed higher amounts of newly formed bone at 2 months - Ti (p = 0.000) and HA (p = 0.009) - and 4 months when compared with Ti (p = 0.001). Differently from HA, the Ti foam was densely distributed across the defect area which rendered less space for bone growth in the latter`s sites. The use of Ti foams or HA resulted in similar amounts of bone formation in both time intervals. Nevertheless, the presence of a Ti-foam rod preserved defect`s marginal bone height as compared with control groups. Also, the Ti-foam group showed a more mature bone pattern at 4 months than HA sites. Conclusion: The Ti foam exhibited good biocompatibility, and its application resulted in improved maintenance of bone height compared with control sites. The Ti foam in a rod design exhibited bone ingrowth properties suitable for further exploration in other experimental situations.

Effect of Environmental Temperature During the First Week of Brooding Period on Broiler Chick Body Weight, Viscera and Bone Development

O presente trabalho teve como objetivo estudar o efeito de diferentes temperaturas-ambiente durante a primeira semana de vida de pintos de corte sob parâmetros zootécnicos, desenvolvimento visceral e crescimento ósseo. Foram utilizados 240 pintos de um dia, alojados em 3 câmaras climáticas, com temperaturas constantes de 20, 25 e 35°C do 1° ao 7° dia de vida. Diariamente, o consumo de água e ração, bem como o peso vivo, o peso relativo do fígado, moela, coração, saco vitelino e bursa de Fabricius foram avaliados. A tíbia e o fêmur também foram pesados e o comprimento e espessura (diâmetro médio) mensurados. As aves criadas a 20°C ganharam menos peso e consumiram menos ração do que aves mantidas a 25°C e menos água do que aves mantidas a 35°C. O peso relativo do fígado, coração e moela foram afetados pela temperatura ambiente, entretanto, não foi observado efeito da temperatura de criação sobre o peso do saco vitelino e bursa de Fabricius. Os dados mostraram que todos os parâmetros ósseos pesquisados aumentaram com a idade das aves. A temperatura ambiente não afetou a espessura da tíbia e do fêmur, mas foi observado um aumento significativo no peso e comprimento dos ossos com o aumento da temperatura ambiente. Os resultados desse experimento mostraram que o estresse por frio (20°C) reduziu o crescimento ósseo bem como o peso vivo das aves, durante os primeiros sete dias após a eclosão.

Low-power laser irradiation improves histomorphometrical parameters and bone matrix organization during tibia wound healing in rats

The influence of daily energy doses of 0.03, 0.3 and 0.9 J of He-Ne laser irradiation on the repair of surgically produced tibia damage was investigated in Wistar rats. Laser treatment was initiated 24 h after the trauma and continued daily for 7 or 14 days in two groups of nine rats (n=3 per laser dose and period). Two control groups (n=9 each) with injured tibiae were used. The course of healing was monitored using morphometrical analysis of the trabecular area. The organization of collagen fibers in the bone matrix and the histology of the tissue were evaluated using Picrosirius-polarization method and Masson's trichrome. After 7 days, there was a significant increase in the area of neoformed trabeculae in tibiae irradiated with 0.3 and 0.9 J compared to the controls. At a daily dose of 0.9 J (15 min of irradiation per day) the 7-day group showed a significant increase in trabecular bone growth compared to the 14-day group. However, the laser irradiation at the daily dose of 0.3 J produced no significant decrease in the trabecular area of the 14-day group compared to the 7-day group, but there was significant increase in the trabecular area of the 15-day controls compared to the 8-day controls. Irradiation increased the number of hypertrophic osteoclasts compared to non-irradiated injured tibiae (controls) on days 8 and 15. The Picrosirius-polarization method revealed bands of parallel collagen fibers (parallel-fibered bone) at the repair site of 14-day-irradiated tibiae, regardless of the dose. This organization improved when compared to 7-day-irradiated tibiae and control tibiae. These results show that low-level laser therapy stimulated the growth of the trabecular area and the concomitant invasion of osteoclasts during the first week, and hastened the organization of matrix collagen (parallel alignment of the fibers) in a second phase not seen in control, non-irradiated tibiae at the same period. The active osteoclasts that invaded the regenerating site were probably responsible for the decrease in trabecular area by the fourteenth day of irradiation. (C) 2003 Elsevier B.V. All rights reserved.

THE ESSENTIAL ROLE OF ZINC IN GROWTH

Zinc is known to play a relevant role in growth and development. The basic mechanisms of action of this trace element are intimately linked to the structure and action of countless enzymes involved in many different metabolic processes. In this respect, when zinc specifically acts on cartilage growth it is involved in multiple enzymatic reactions which make this a multifactorial event. Thus, we may divide the actions of zinc into three distinct types: 1) action on taste and smell acuity, appetite regulation, and food consumption and regulation; 2) action on DNA and RNA synthesis stimulating a) cell replication and differentiation of chondrocytes, osteoblasts and fibroblasts; b) cell transcription culminating in the synthesis of somatomedin-C (liver), alkaline phosphatase, collagen and osteocalcin (bone), and c) protein, carbohydrate and lipid metabolism, that is intimately related to the mechanisms of smell, taste, appetite, and food consumption and utilization; 3) action on hormonal mediation by participating in a) GH synthesis and secretion in somatomammotroph cells, b) the action of GH on liver somatomedin-C production, and c) somatomedin-C activation in bone cartilage. In addition to these multiple functions, zinc also interacts with other hormones somehow related to bone growth such as testosterone, thyroid hormones, insulin, and vitamin D-3.On the basis of the above considerations, we conclude that the integration of these mechanisms contributes to the perfect physiological functioning of bone. Tn the presence of zinc deficiency, this homeostasis is impaired, causing the weight-height deficiency detected in several species studied, the human species in particular.

Effect of calcitonin on bone regeneration in male rats: a histomorphometric analysis

The aim of this study was to evaluate the effectiveness of calcitonin in promoting bone growth in surgical bone defects in rat mandibles. Fifty male rats were divided into two groups: bone defect (control) and bone defect with calcitonin (experimental). A circular bone defect 4 mm in diameter was made in the mandibular bone of the rats in the angle region, and covered with a polytetrafluoroethylene barrier. The experimental group received 2 IU/kg of synthetic salmon calcitonin intramuscularly three times a week, with treatment starting immediately after surgery. The animals were killed 3, 7, 14, 21 and 28 days after the surgical procedure. The bone defects were examined histologically and by histomorphometric analysis. The Student t-test was applied to the histomorphometric data, with the level of significance set at 5%. The animals of the experimental group showed a lower level of bone formation at almost all time points than the control group, but no difference between groups was observed 28 days after surgery. The volume of newly formed bone matrix was significantly greater in the control than the experimental group at 7, 14 and 21 days, as determined by both morphologic and histomorphometric analysis. Bone repair in the calcitonin-treated animals was delayed in comparison to controls, indicating the need for further studies on male rats.

Influence of early qualitative feed restriction and environmental temperature on long bone development of broiler chickens

This investigation was carried out to study the influence of early qualitative feed restriction and environmental rearing temperature on long bone development in broiler. Energy and protein restriction reduced femur width and humerus weight, but did not affect tibia parameters. Broilers kept at cold environmental temperature showed reduced femur, tibia and humerus length and tibia weight, but the calculated density was not affected by rearing temperature. These findings suggest that qualitative feed restriction and environmental temperature influenced the normal long bone growth; however, bone weight/bone length index (calculated density) was not affected by rearing temperature. (c) 2007 Elsevier Ltd. All rights reserved.

Development, characterization and clinical use of a biodegradable composite scaffold for bone engineering in oro-maxillo-facial surgery

We have developed a biodegradable composite scaffold for bone tissue engineering applications with a pore size and interconnecting macroporosity similar to those of human trabecular bone. The scaffold is fabricated by a process of particle leaching and phase inversion from poly(lactide-co-glycolide) (PLGA) and two calcium phosphate (CaP) phases both of which are resorbable by osteoclasts; the first a particulate within the polymer structure and the second a thin ubiquitous coating. The 3-5 mu m thick osteoconductive surface CaP abrogates the putative foreign body giant cell response to the underlying polymer, while the internal CaP phase provides dimensional stability in an otherwise highly compliant structure. The scaffold may be used as a biomaterial alone, as a carrier for cells or a three-phase drug delivery device. Due to the highly interconnected macroporosity ranging from 81% to 91%, with macropores of 0.8 similar to 1.8 mm, and an ability to wick up blood, the scaffold acts as both a clot-retention device and an osteoconductive support for host bone growth. As a cell delivery vehicle, the scaffold can be first seeded with human mesenchymal cells which can then contribute to bone formation in orthotopic implantation sites, as we show in immune-compromised animal hosts. We have also employed this scaffold in both lithomorph and particulate forms in human patients to maintain alveolar bone height following tooth extraction, and augment alveolar bone height through standard sinus lift approaches. We provide a clinical case report of both of these applications; and we show that the scaffold served to regenerate sufficient bone tissue in the wound site to provide a sound foundation for dental implant placement. At the time of writing, such implants have been in occlusal function for periods of up to 3 years in sites regenerated through the use of the scaffold.

PLA/PGA copolymer as a bone substitute in maxillary sinus augmentation: histological, histometric and immunohistochemistry study in rabbits

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Do Higher Temperatures Increase Growth in the Nocturnal Gecko Homonota darwini (Gekkota: Phyllodactylidae)? A Skeletochronological Assessment Analyzed at Temporal and Geographic Scales

Recent studies predict that several lineages of tropical animals are at particular risk given current estimates of global climate change. Yet, much uncertainty exists on the effects of climate shifts in ectothermic species from cool temperate regions such as Patagonia. In this study, we focus on the impact of environmental temperature on growth, age at sexual maturity, and life-span of the Patagonian gecko Homonota darwini. Skeletochronological methods were used to assess the bone growth rates Of individuals from three populations at different geographic and temporal scales: two populations from Chubut (warm site; 1941 and 2010) and one population from Rio Negro (cold site; 1997-1998). Populations displayed similar bone arrangement and the growth patterns fit a von Bertalanffy curve. Three populations attained reproductive size at a minimum age of 3 yr, but at the cold site two specimens were shown to mature in 4 yr. We found no differences in juvenile growth rates in body size or bone zone width between juveniles of 1 to 3 yr of age from the 1941 warm site and the 2010 warm site. However, these traits appeared to be higher at these two warm sites than at the cold site, which is consistent with the climatic differences among the three localities. Our results suggest that higher temperatures positively affect growth, denoting that global warming might benefit H. darwini, especially the southern populations.

Exercise and bone mass in adults

[EN] There is a substantial body of evidence indicating that exercise prior to the pubertal growth spurt stimulates bone growth and skeletal muscle hypertrophy to a greater degree than observed during growth in non-physically active children. Bone mass can be increased by some exercise programmes in adults and the elderly, and attenuate the losses in bone mass associated with aging. This review provides an overview of cross-sectional and longitudinal studies performed to date involving training and bone measurements. Cross-sectional studies show in general that exercise modalities requiring high forces and/or generating high impacts have the greatest osteogenic potential. Several training methods have been used to improve bone mineral density (BMD) and content in prospective studies. Not all exercise modalities have shown positive effects on bone mass. For example, unloaded exercise such as swimming has no impact on bone mass, while walking or running has limited positive effects.