Efeito de parâmetros hidrolíticos na obtenção de hidrolisados proteicos de farinha de trigo com baixo teor de fenilalanina

Tendo como objetivo a obtenção de hidrolisados proteicos de farinha de trigo com baixo teor de fenilalanina (Phe), foram preparados, inicialmente, extratos proteicos da farinha de trigo, empregando-se método enzimático pela ação de protease de Bacillus licheniformis. Em seguida, esses extratos foram hidrolisados sob a ação do extrato enzimático bruto (EEB), obtido de casca de abacaxi, e de pancreatina comercial; e alguns parâmetros hidrolíticos foram avaliados, tais como temperatura (30; 35; 40; 50; e 70 °C), tempo (1 hora e 30 minutos; 2 horas e 30 minutos; 3 horas e 30 minutos), e pH de reação (6,0; 7,0; 8,0 e 9,0). Para a remoção de Phe, empregou-se o carvão ativado (CA) e a eficiência deste processo foi avaliada determinando-se o teor de Phe por espectrofotometria derivada segunda, na farinha de trigo, assim como nos hidrolisados após tratamento com CA. Para os três parâmetros estudados, observaram-se efeitos variados sobre a remoção de Phe, sendo que os melhores resultados foram encontrados ao se empregar a associação sucessiva de EEB (E:S 10:100, 1 hora e 30 minutos), com a pancreatina (E:S 4:100, 3 horas e 30 minutos), em pH 7,0 a 50 °C, tendo atingido 66,28% de remoção de Phe, o que corresponde a um teor final de Phe de 522,44 mg.100 g-1 de hidrolisado.

Sugarcane starch: quantitative determination and characterization

Starch is found in sugarcane as a storage polysaccharide. Starch concentrations vary widely depending on the country, variety, developmental stage, and growth conditions. The purpose of this study was to determine the starch content in different varieties of sugarcane, between May and November 2007, and some characteristics of sugarcane starch such as structure and granules size; gelatinization temperature; starch solution filterability; and susceptibility to glucoamylase, pullulanase, and commercial bacterial and fungal α-amylase enzymes. Susceptibility to debranching amylolytic isoamylase enzyme from Flavobacterium sp. was also tested. Sugarcane starch had spherical shape with a diameter of 1-3 µm. Sugarcane starch formed complexes with iodine, which showed greater absorption in the range of 540 to 620 nm. Sugarcane starch showed higher susceptibility to glucoamylase compared to that of waxy maize, cassava, and potato starch. Sugarcane starch also showed susceptibility to debranching amylolytic pullulanases similar to that of waxy rice starch. It also showed susceptibility to α-amylase from Bacillus subtilis, Bacillus licheniformis, and Aspergillus oryzae similar to that of the other tested starches producing glucose, maltose, maltotriose, maltotetraose, maltopentose and limit α- dextrin.

Trypsin Inhibitor from Edible Mushroom Pleurotus floridanus Active against Proteases of Microbial Origin

Protease inhibitors can be versatile tools mainly in the fields of medicine, agriculture and food preservative applications. Fungi have been recognized as sources of protease inhibitors, although there are only few such reports on mushrooms. This work reports the purification and characterization of a trypsin inhibitor from the fruiting body of edible mushroom Pleurotus floridanus (PfTI) and its effect on the activity of microbial proteases. The protease inhibitor was purified up to 35-fold by DEAE-Sepharose ion exchange column, trypsin-Sepharose column and Sephadex G100 column. The isoelectric point of the inhibitor was 4.4, and its molecular mass was calculated as 37 kDa by SDS-PAGE and 38.3 kDa by MALDI-TOF. Inhibitory activity confirmation was by dot-blot analysis and zymographic activity staining. The specificity of the inhibitor toward trypsin was with Ki of 1.043×10−10 M. The inhibitor was thermostable up to 90 °C with maximal stability at 30 °C, active over a pH range of 4–10 against proteases from Aspergillus oryzae, Bacillus licheniformis, Bacillus sp. and Bacillus amyloliquefaciens. Results indicate the possibility of utilization of protease inhibitor from P. floridanus against serine proteases

Amylase utilization for the extrusion of dog diets

Effects of amylase addition on extruder parameters, cost of extrusion, kibble quality and digestibility of dog food were measured in two separate experiments. In experiment 1, 120 kilo-novo-alpha-amilase-unit (KNU)/kg of heat stable alpha-amylase produced by Bacillus licheniformis was added in liquid form during a preconditioning period. In experiment 23684 KNU/kg of heat stable alpha-amylase produced by Aspergillus oryzae was mixed with the ingredients before extrusion. The diets were processed in a single screw extruder and submitted to digestibility and on experiment 1 also to palatability tests. Digestibility was tested using 12 dogs, six per diet. Data were submitted to analysis of variance followed by F-test. Amylase addition altered extrusion parameters in both experiments (P<0.05), with higher output (kg of dry matter [DM]/h: 28% and 43% higher in experiments 1 and 2) and less electric energy consumption (kW to produce 100 kg DM: 22% and 29% lower in experiments 1 and 2). Kibble appearance and quality [density (g/L), cutting force (g), and starch gelatinization degree (%)] did not change with enzyme treatment (P>0.05). Likewise, enzyme addition did not change nutrient digestibility, fecal dry matter or food palatability (P<0.05). Taken together our results suggest that amylase promoted the breakdown of amylose chains, thereby reducing the dough viscosity and resistance inside the extruder which allowed for higher product flow and less electricity energy consumption without altering food quality. (C) 2012 Elsevier B.V. All rights reserved.

Controle em pós-colheita de Penicillium digitatum em laranja-pera com microrganismos e tratamento térmico

The consumer market demands food without pesticide residues. Therefore, this study focused on evaluating the control of green mold in Pera orange trees with biocontrol agents (Bacillus subtilis, Bacillus licheniformis and Bacillus subtilis (QST 713)), associated or not with heat treatment. The fruit was obtained in packinghouse before processing, being washed and disinfected with the use of Sodium Hypochlorite. Fruits submitted to these treatments were stored from 11 to 28 days at temperature of 10 °C and RH 90%±5 or for eight days at 20 °C and 90%±5. In general, the heat treatment reduced the disease severity determine by the area under the disease progress curve in the fruit and the incidence of natural postharvest disease in Pera oranges. On the other hand, biocontrol agents did not control the disease, showing that the organisms tested did not present curative activity against the green mold.

Probióticos para leitões lactentes e na fase de creche

Pós-graduação em Zootecnia - FMVZ

Controle em pós-colheita de bolor verde em laranja pêra com microrganismos e tratamento térmico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Probiótico e enzimas em dietas de frangos de corte: desempenho, características da cama e excretas e produção de biogás

Pós-graduação em Zootecnia - FCAV

Avaliação de resíduos orgânicos para o manejo de Fusariose em diferentes patossistemas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Mikrobielle Synthese von Biopolymeren aus der nachwachsenden Rohstoffquelle Weizenstroh

Weizenstroh als erneuerbare Ressource zur Produktion von Biopolymeren und wichtigen Grundchemikalien stellt eine ökologisch sinnvolle Alternative dar. Durch die vom PFI durchgeführte Thermodruckhydrolyse konnte das Weizenstroh und die darin enthaltenen Zucker fast vollständig mobilisiert werden. Ein umfangreiches Screening nach Organismen, welche die Zucker des Weizenstrohs verwerten konnten, ergab, dass einige wenige Stämme zur PHB-Bildung aus Xylose befähigt waren (10 %). Zur PHB-Synthese aus Glucose waren indes ca. doppelt so viele Organismen in der Lage (20 %). Zwei der insgesamt 118 untersuchten Organismen zeigten besonders gute PHB-Bildung sowohl mit Xylose als auch mit Glucose als Substrat. Dabei handelte es sich um die hauseigenen Stämme Bacillus licheniformis KHC 3 und Bacillus megaterium KNaC 2. Nach Enttoxifizierung der hemicellulosischen Fraktion konnte diese als C-Quelle im Mineral Medium eingesetzt werden. Burkholderia sacchari DSM 17165 und Hydrogenophaga pseudoflava DSM 1034, sowie die hauseigenen Isolate Bacillus licheniformis KHC 3 und Bacillus megaterium KNaC 2 wurden für die Synthese von PHB aus der hemicellulosischen Fraktion verwendet. Die Zucker der hemicellulosischen Fraktion (Xylose, Glucose, Arabinose) konnten durch diese Organismen zur PHB-Synthese genutzt werden. Hierbei stellte sich heraus, dass die beiden Bacillus-Stämme besser zur Produktion von PHB aus dem hemicellulosischen Hydrolysat geeignet waren als die Stämme der DSMZ. Die alternative Umsetzung der im hemicellulosischem Hydrolysat enthaltenen Zucker (Xylose, Glucose und Arabinose) in die wichtigen Grundchemikalien Lactat und Acetat konnte durch die Verwendung von heterofermentativen Milchsäurebakterien verwirklicht werden. Die Bildung dieser wichtigen Grundchemikalien stellt eine interessante Alternative zur PHB-Synthese dar. Die Menge an teuren Zusätzen wie Tomatensaft, welcher für das Wachstum der MSB essentiell war, konnte reduziert werden. Die Glucose der zweiten Fraktion des Weizenstrohs, der cellulosischen Fraktion, konnte ebenfalls durch den Einsatz von Mikroorganismen in PHB umgewandelt werden. Kommerzielle Cellulasen der Firma Novozymes konnten große Mengen an Glucose (≥10 g/l) aus der cellulosischen Fraktion freisetzen. Diese freie Glucose wurde mit Hilfe von Cupriavidus necator DSM 545, Cupriavidus necator NCIMB 11599, Bacillus licheniformis KHC 3 und Bacillus megaterium KNaC 2 zu PHB fermentiert. Wie auch beim hemicellulosischen Hydrolysat konnten hier die beiden Bacillus-Stämme die besten Ergebnisse erzielen. Bei ihnen machte die PHB mehr als die Hälfte der Trockenmasse aus. Die Abtrennung des Zielprodukts ohne die Verwendung von umweltschädlichen Lösungsmitteln wurde durch die Lyse der Zielzellen durch eigens isolierte Enzyme aus Streptomyceten verwirklicht. Die Zelllyse durch die Enzyme aus Streptomyces globisporus subsp. caucasius DSM 40814 und Streptomyces albidoflavus DSM 40233 war erfolgreich und zeigte vor allem bei den Bacillen hohe Wirkung (83 % und 99 % Zelllyse). Bei dem Gram-negativen Organismus Cupriavidus necator DSM 428 konnte die anfangs niedrige Zelllyse von 38 % durch Ultraschallbehandlung auf ca. 75 % erhöht werden.

CopY-like copper inducible repressors are putative 'winged helix' proteins

CopY of Enterococcus hirae is a well characterized copper-responsive repressor involved in copper homeostasis. In the absence of copper, it binds to the promoter. In high copper, the CopZ copper chaperone donates copper to CopY, thereby releasing it from the promoter and allowing transcription of the downstream copper homeostatic genes of the cop operon. We here show that the CopY-like repressors from E. hirae, Lactococcus lactis, and Streptococcus mutans have similar affinities not only for their native promoters, but also for heterologous cop promoters. CopZ of L. lactis accelerated the release of CopY from the promoter, suggesting that CopZ of L. lactis acts as copper chaperone, similar to CopZ in E. hirae. The consensus binding motif of the CopY-like repressors was shown to be TACAxxTGTA. The same binding motif is present in promoters controlled by BlaI of Bacillus licheniformis, MecI of Staphylococcus aureus and related repressors. BlaI and MecI have known structures and belong to the family of 'winged helix' proteins. In the N- terminal domain, they share significant sequence similarity with CopY of E. hirae. Moreover, they bind to the same TACAxxTGTA motif. NMR analysis of the N-terminal DNA binding domain of CopY of L. lactis showed that it contained the same alpha-helical content like the same regions of BlaI and MecI. These findings suggest that the DNA binding domains of CopY-like repressors are also of the 'winged helix' type.

The copper-responsive repressor CopR of Lactococcus lactis is a 'winged helix' protein

CopR of Lactococcus lactis is a copper-responsive repressor involved in copper homoeostasis. It controls the expression of a total of 11 genes, the CopR regulon, in a copper-dependent manner. In the absence of copper, CopR binds to the promoters of the CopR regulon. Copper releases CopR from the promoters, allowing transcription of the downstream genes to proceed. CopR binds through its N-terminal domain to a 'cop box' of consensus TACANNTGTA, which is conserved in Firmicutes. We have solved the NMR solution structure of the N-terminal DNA-binding domain of CopR. The protein fold has a winged helix structure resembling that of the BlaI repressor which regulates antibiotic resistance in Bacillus licheniformis. CopR differs from other copper-responsive repressors, and the present structure represents a novel family of copper regulators, which we propose to call the CopY family.

Estudos de proteômica, estruturais e funcionais de proteínas envolvidas na degradação da biomassa lignocelulósica: expansinas microbianas e hidrolases de glicosídeos termofílicas

O Brasil possui uma posição privilegiada quando se refere à produção de etanol. Por questões históricas e geográficas o país é responsável por mais de 30 % da produção mundial de etanol, com uma produção nacional de mais de 28 bilhões de litros em 2014. Para maximizar o rendimento desse processo, está em desenvolvimento a tecnologia associada ao etanol de segunda geração ou etanol lignocelulósico. Os principais desafios desta tecnologia são: melhorar a eficiência de conversão do substrato em produto e a produção em grande escala utilizando substratos de baixo custo. Com o objetivo de melhorar a eficiência do processo de conversão foram estudadas proteínas auxiliares (expansinas) que, em conjunto com celulases, melhoram a despolimerização de biomassa lignocelulósica em açúcares fermentescíveis. Além disso, realizou-se também a caracterização de enzimas ativas de carboidratos (CAZymes) de origem termofílica do organismo Thermogemmatispora sp. T81, devido a capacidade que estas proteínas apresentam de manter a atividade e conformação estrutural em altas temperaturas por um prolongado período de tempo. A partir de análises utilizando bioinformática, os genes que codificam para expansinas de Xanthomonas campestris, Bacillus licheniformis e Trichoderma reesei foram clonados e expressos em E. coli, e seus produtos gênicos (as expansinas) tiveram seus índices de sinergismo (devido atuação conjunta com coquetéis comerciais) e atividade catalítica determinados. Adicionalmente, dispondo de alinhamentos estruturais, foi proposto um mecanismo hidrolítico para elas. Em relação à bactéria Thermogemmatispora sp. T81, foram realizadas análises genômicas e proteômicas, a fim de selecionar enzimas superexpressas em meio celulósico. Seus genes foram clonados heterologamente em E. coli e o produto de expressão caracterizado bioquimicamente (cromatografia, ensaios de atividade e perfil de hidrólise) e estruturalmente (SAXS e dicroísmo circular). Os índices de sinergismo determinados foram de 2,47; 1,96 e 2,44 para as expansinas de Xanthomonas campestris, Bacillus licheniformis e Trichoderma reesei, respectivamente. A partir dos alinhamentos estruturais foi proposto a díade Asp/Glu como sitio catalítico em expansinas. As análises de proteômica possibilitaram a seleção de quatro alvos de clonagem, por apresentarem alto índice de expressão quando a bactéria foi cultivada em meio celulósico. Estas proteínas foram caracterizadas quanto a atividade e apresentaram um perfil comum: temperatura ótima de ação (de 70 a 75 °C), pH ótimo de 5, e hidrolisam preferencialmente substratos hemicelulósicos (xilano). A porcentagem de estruturais secundárias das proteínas em estudo foram confirmadas com predições teóricas ao se utilizar a técnica de dicroísmo circular. Desta maneira, os objetivos iniciais propostos neste projeto foram concluídos com a determinação do grau de sinergismo das proteínas expansinas em estudo e a proposição de um mecanismo de hidrólise para as mesmas, considerando que tais proteínas por mais de 20 anos tiveram sua atividade definida exclusivamente como acessória. Além disso, este estudo contribui com a identificação e seleção de genes para CAZymes termofilícas com aplicação biotecnológica devido às propriedades termoestáveis apresentadas.

Real-time PCR investigation on the expression of sboA and ituD genes in Bacillus spp

Aims: To investigate the expression of sboA and ituD genes among strains of Bacillus spp. at different pH and temperature. Methods and Results: Different Bacillus strains from the Amazon basin and Bacillus subtilis ATCC 19659 were investigated for the production of subtilosin A and iturin A by qRT-PCR, analysing sboA and ituD gene expression under different culture conditions. Amazonian strains presented a general gene expression level lower than B. subtilis ATCC 19659 for sboA. In contrast, when analysing the expression of ituD gene, the strains from the Amazon, particularly P40 and P45B, exhibited higher levels of expression. Changes in pH (6 and 8) and temperature (37 and 42 degrees C) caused a decrease in sboA expression, but increased ituD expression among strains from Amazonian environment. Conclusions: Temperature and pH have an important influence on the expression of genes sboA (subtilosin A) and ituD (iturin A) among Bacillus spp. The strains P40 and P45B can be useful for the production of antimicrobial peptide iturin A. Significance and Impact of the Study: Monitoring the expression of essential biosynthetic genes by qRT-PCR is a valuable tool for optimization of the production of antimicrobial peptides.

Heat resistance of Bacillus spores when adhered to stainless steel and its relationship to spore hydrophobicity

Twenty-one strains of Bacillus (10 B. stearothermophilus, 3 B. cereus, and 8 B. licheniformis strains) were assayed for spore surface hydrophobicity on the basis of three measures: contact angle measurement (CAM), microbial adhesion to hydrocarbons (MATH), and hydrophobic interaction chromatography (HIC). On the basis of the spore surface characteristics obtained from these assays, along with data on the heat resistance of these spores in water, eight strains of Bacillus (three B. stearothermophilus, three B. cereus, and two B. licheniformis strains) either suspended in water or adhering to stainless steel were exposed to sublethal heat treatments at 90 to 110degreesC to determine heat resistance (D-value). Significant increases in heat resistance (ranging from 3 to 400%) were observed for the eight strains adhering to stainless steel. No significant correlation was found between these heat resistance increases and spore surface characteristics as determined by the three hydrophobicity assays. There was a significant positive correlation between the hydrophobicity data obtained by the MATH assay and those obtained by the HIC assay, but these data did not correlate with those obtained by the CAM assay.