Total eclipse of the heart: the AM CVn Gaia14aae/ASSASN-14cn

We report the discovery and characterization of a deeply eclipsing AM CVn-system, Gaia14aae (=ASSASN-14cn). Gaia14aae was identified independently by the All-Sky Automated Survey for Supernovae (ASAS-SN; Shappee et al.) and by the Gaia Science Alerts project, during two separate outbursts. A third outburst is seen in archival Pan-STARRS-1 (PS1; Schlafly et al.; Tonry et al.; Magnier et al.) and ASAS-SN data. Spectroscopy reveals a hot, hydrogen-deficient spectrum with clear double-peaked emission lines, consistent with an accreting double-degenerate classification. We use follow-up photometry to constrain the orbital parameters of the system. We find an orbital period of 49.71 min, which places Gaia14aae at the long period extremum of the outbursting AM CVn period distribution. Gaia14aae is dominated by the light from its accreting white dwarf (WD). Assuming an orbital inclination of 90° for the binary system, the contact phases of the WD lead to lower limits of 0.78 and 0.015 M⊙ on the masses of the accretor and donor, respectively, and a lower limit on the mass ratio of 0.019. Gaia14aae is only the third eclipsing AM CVn star known, and the first in which the WD is totally eclipsed. Using a helium WD model, we estimate the accretor's effective temperature to be 12 900 ± 200 K. The three outburst events occurred within four months of each other, while no other outburst activity is seen in the previous 8 yr of Catalina Real-time Transient Survey (CRTS; Drake et al.), Pan-STARRS-1 and ASAS-SN data. This suggests that these events might be rebrightenings of the first outburst rather than individual events.

A study of the thermal decomposition of allyl t-butyl peroxide and 3-hydroperoxy-1-propene (allyl hydroperoxide) in toluene /|nby Krishnankutty Nair V. G. -- 260 St. Catharines [Ont. : s. n.],

Kinetics and product studies of the decompositions of allyl-t-butyl peroxide and 3-hydroperoxy- l-propene (allyl hydroperoxide ) in tolune were investigated. Decompositions of allyl-t-butyl peroxide in toluene at 130-1600 followed first order kinetics with an activation energy of 32.8 K.cals/mol and a log A factor of 13.65. The rates of decomposition were lowered in presence of the radical trap~methyl styrene. By the radical trap method, the induced decomposition at 1300 is shown to be 12.5%. From the yield of 4-phenyl-l,2- epoxy butane the major path of induced decomposition is shown to be via an addition mechanism. On the other hand, di-t-butYl peroxyoxalate induced decomposition of this peroxide at 600 proceeded by an abstraction mechanism. Induced decomposition of peroxides and hydroperoxides containing the allyl system is proposed to occur mainly through an addition mechanism at these higher temperatures. Allyl hydroperoxide in toluene at 165-1850 decomposes following 3/2 order kinetics with an Ea of 30.2 K.cals per mole and log A of 10.6. Enormous production of radicals through chain branching may explain these relatively low values of E and log A. The complexity of the reaction is indicated a by the formation of various products of the decomposition. A study of the radical attack of the hydro peroxide at lower temperatures is suggested as a further work to throw more light on the nature of decomposition of this hydroperoxide.

Bismuth Modified Gold Microelectrode for Pb(II) Determination in Wine Using Alkaline Medium

Electrodeposition of bismuth on gold microelectrodes for determination of Pb(II) by square wave anodic stripping voltammetry (SWASV) was accomplished by an in situ procedure in alkaline solution. A linear calibration plot for Pb(II) in the concentration range 40 to 6700 nmol L(-1) (r=0.998) was obtained, the detection limit was found to be 12.5 nmol L(-1) (S/N = 3) and the relative standard deviation in Solutions containing 1 mu mol L(-1) Pb(II) was 4% (n = 12). The analytical performance of the proposed sensor wits tested by measuring the Pb(II) concentration in a wine sample. The result Was in good agreement with the one obtained by GFAAS.

A doorway to Borromean halo nuclei: the Samba configuration

We exploit the possibility of new configurations in three-body halo nuclei, Samba type (the neutron-core form a bound system) as a doorway to Borromean systems. The nuclei Be-12, B-15, N-23 and F-27 are of such nature, in particular N-23 with a half-life of 37.7 s and a halo radius of 6.07 fm is an excellent example of Samba-halo configuration. The fusion below the barrier of the Samba halo nuclei with heavy targets could reveal the so far elusive enhancement and a dominance of one-neutron over two-neutron transfers, in contrast to what was found recently for the Borromean halo nucleus He-6 + U-238.

Search for physics beyond the standard model in dilepton mass spectra in proton-proton collisions at root s=8 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Highly Efficient IR to NIR Upconversion in Gd2O2S: Er3+ for Photovoltaic Applications

Upconversion (UC) is a promising option to enhance the efficiency of solar cells by conversion of sub-bandgap infrared photons to higher energy photons that can be utilized by the solar cell. The UC quantum yield is a key parameter for a successful application. Here the UC luminescence properties of Er3+-doped Gd2O2S are investigated by means of luminescence spectroscopy, quantum yield measurements, and excited state dynamics experiments. Excitation into the maximum of the 4I15/2 → 4I13/2 Er3+ absorption band around 1500 nm induces very efficient UC emission from different Er3+ excited states with energies above the silicon bandgap, in particular, the emission originating from the 4I11/2 state around 1000 nm. Concentration dependent studies reveal that the highest UC quantum yield is realized for a 10% Er3+-doping concentration. The UC luminescence is compared to the well-known Er3+-doped β-NaYF4 UC material for which the highest UC quantum yield has been reported for 25% Er3+. The UC internal quantum yields were measured in this work for Gd2O2S: 10%Er3+ and β-NaYF4: 25%Er3+ to be 12 ± 1% and 8.9 ± 0.7%, respectively, under monochromatic excitation around 1500 nm at a power of 700 W/m2. The UC quantum yield reported here for Gd2O2S: 10%Er3+ is the highest value achieved so far under monochromatic excitation into the 4I13/2 Er3+ level. Power dependence and lifetime measurements were performed to understand the mechanisms responsible for the efficient UC luminescence. We show that the main process yielding 4I11/2 UC emission is energy transfer UC.

Fine-scale population structure analysis of seven local Swiss sheep breeds using genome-wide SNP data

As part of the global sheep Hapmap project, 24 individuals from each of seven indigenous Swiss sheep breeds (Bundner Oberländer sheep (BOS), Engadine Red sheep (ERS), Swiss Black-Brown Mountain sheep (SBS), Swiss Mirror sheep (SMS), Swiss White Alpine (SWA) sheep, Valais Blacknose sheep (VBS) and Valais Red sheep (VRS)), were genotyped using Illumina’s Ovine SNP50 BeadChip. In total, 167 animals were subjected to a detailed analysis for genetic diversity using 45 193 informative single nucleotide polymorphisms. The results of the phylogenetic analyses supported the known proximity between populations such as VBS and VRS or SMS and SWA. Average genomic relatedness within a breed was found to be 12 percent (BOS), 5 percent (ERS), 9 percent (SBS), 10 percent (SMS), 9 percent (SWA), 12 percent (VBS) and 20 percent (VRS). Furthermore, genomic relationships between breeds were found for single individuals from SWA and SMS, VRS and VBS as well as VRS and BOS. In addition, seven out of 40 indicated parent–offspring pairs could not be confirmed. These results were further supported by results from the genome-wide population cluster analysis. This study provides a better understanding of fine-scale population structures within and between Swiss sheep breeds. This relevant information will help to increase the conservation activities of the local Swiss sheep breeds.

Shape model, reference system definition, and cartographic mapping standards for comet 67P/Churyumov-Gerasimenko Stereo-photogrammetric analysis of Rosetta/OSIRIS image data

We analyzed more than 200 OSIRIS NAC images with a pixel scale of 0.9-2.4 m/pixel of comet 67P/Churyumov-Gerasimenko (67P) that have been acquired from onboard the Rosetta spacecraft in August and September 2014 using stereo-photogrammetric methods (SPG). We derived improved spacecraft position and pointing data for the OSIRIS images and a high-resolution shape model that consists of about 16 million facets (2 m horizontal sampling) and a typical vertical accuracy at the decimeter scale. From this model, we derive a volume for the northern hemisphere of 9.35 km(3) +/- 0.1 km(3). With the assumption of a homogeneous density distribution and taking into account the current uncertainty of the position of the comet's center-of-mass, we extrapolated this value to an overall volume of 18.7 km(3) +/- 1.2 km(3), and, with a current best estimate of 1.0 X 10(13) kg for the mass, we derive a bulk density of 535 kg/m(3) +/- 35 kg/m(3). Furthermore, we used SPG methods to analyze the rotational elements of 67P. The rotational period for August and September 2014 was determined to be 12.4041 +/- 0.0004 h. For the orientation of the rotational axis (z-axis of the body-fixed reference frame) we derived a precession model with a half-cone angle of 0.14 degrees, a cone center position at 69.54 degrees/64.11 degrees (RA/Dec J2000 equatorial coordinates), and a precession period of 10.7 days. For the definition of zero longitude (x-axis orientation), we finally selected the boulder-like Cheops feature on the big lobe of 67P and fixed its spherical coordinates to 142.35 degrees right-hand-rule eastern longitude and -0.28 degrees latitude. This completes the definition of the new Cheops reference frame for 67P. Finally, we defined cartographic mapping standards for common use and combined analyses of scientific results that have been obtained not only within the OSIRIS team, but also within other groups of the Rosetta mission.

Topographic model of Greenland (elevation lines in PanMap and ASCII format)

In this paper, a new high-resolution elevation model of Greenland, including the ice sheet as well as the ice free regions, is presented. It is the first published full coverage model, computed with an average resolution of 2 km and providing an unprecedented degree of detail. The topography is modeled from a wide selection of data sources, including satellite radar altimetry from Geosat and ERS 1, airborne radar altimetry and airborne laser altimetry over the ice sheet, and photogrammetric and manual map scannings in the ice free region. The ice sheet model accuracy is evaluated by omitting airborne laser data from the analysis and treating them as ground truth observations. The mean accuracy of the ice sheet elevations is estimated to be 12-13 m, and it is found that on surfaces of a slope between 0.2° and 0.8°, corresponding to approximately 50% of the ice sheet, the model presents a 40% improvement over models based on satellite altimetry alone. On coastal bedrock, the model is compared with stereo triangulated reference points, and it is found that the model accuracy is of the order of 25-35 m in areas covered by stereo photogrammetry scannings and between 200 and 250 m elsewhere.

Using ground-penetrating radar, topography and classification of vegetation to model the sediment and active layer thickness in a periglacial lake catchment, Western Greenland, link to shapefiles

The geometries of a catchment constitute the basis for distributed physically based numerical modeling of different geoscientific disciplines. In this paper results from ground-penetrating radar (GPR) measurements, in terms of a 3D model of total sediment thickness and active layer thickness in a periglacial catchment in western Greenland, is presented. Using the topography, thickness and distribution of sediments is calculated. Vegetation classification and GPR measurements are used to scale active layer thickness from local measurements to catchment scale models. Annual maximum active layer thickness varies from 0.3 m in wetlands to 2.0 m in barren areas and areas of exposed bedrock. Maximum sediment thickness is estimated to be 12.3 m in the major valleys of the catchment. A method to correlate surface vegetation with active layer thickness is also presented. By using relatively simple methods, such as probing and vegetation classification, it is possible to upscale local point measurements to catchment scale models, in areas where the upper subsurface is relatively homogenous. The resulting spatial model of active layer thickness can be used in combination with the sediment model as a geometrical input to further studies of subsurface mass-transport and hydrological flow paths in the periglacial catchment through numerical modelling.

Estudio empírico de la influencia de la experiencia y del conocimiento del dominio del analista en la efectividad de la educción de requisitos

Contexto: La presente tesis doctoral se enmarca en la actividad de educción de los requisitos. La educción de requisitos es generalmente aceptada como una de las actividades más importantes dentro del proceso de Ingeniería de Requisitos, y tiene un impacto directo en la calidad del software. Es una actividad donde la comunicación entre los involucrados (analistas, clientes, usuarios) es primordial. La efectividad y eficacia del analista en la compresión de las necesidades de clientes y usuarios es un factor crítico para el éxito del desarrollo de software. La literatura se ha centrado principalmente en estudiar y comprender un conjunto específico de capacidades o habilidades personales que debe poseer el analista para realizar de forma efectiva la actividad de educción. Sin embargo, existen muy pocos trabajos que han estudiado dichas capacidades o habilidades empíricamente. Objetivo: La presente investigación tiene por objetivo estudiar el efecto de la experiencia, el conocimiento acerca del dominio y la titulación académica que poseen los analistas en la efectividad del proceso de educción de los requisitos, durante los primeros contactos del analista con el cliente. Método de Investigación: Hemos ejecutado 8 estudios empíricos entre cuasi-experimentos (4) y experimentos controlados (4). Un total de 110 sujetos experimentales han participado en los estudios, entre estudiantes de post-grado de la Escuela Técnica Superior de Ingenieros Informáticos de la Universidad Politécnica de Madrid y profesionales. La tarea experimental consistió en realizar sesiones de educción de requisitos sobre uno o más dominios de problemas (de carácter conocido y desconocido para los sujetos). Las sesiones de educción se realizaron empleando la entrevista abierta. Finalizada la entrevista, los sujetos reportaron por escrito toda la información adquirida. Resultados: Para dominios desconocidos, la experiencia (entrevistas, requisitos, desarrollo y profesional) del analista no influye en su efectividad. En dominios conocidos, la experiencia en entrevistas (r = 0.34, p-valor = 0.080) y la experiencia en requisitos (r = 0.22, p-valor = 0.279), ejercen un efecto positivo. Esto es, los analistas con más años de experiencia en entrevistas y/o requisitos tienden a alcanzar mejores efectividades. Por el contrario, la experiencia en desarrollo (r = -0.06, p-valor = 0.765) y la experiencia profesional (r = -0.35, p-valor = 0.077), tienden a ejercer un efecto nulo y negativo, respectivamente. En lo que respecta al conocimiento acerca del dominio del problema que poseen los analistas, ejerce un moderado efecto positivo (r=0.31), estadísticamente significativo (p-valor = 0.029) en la efectividad de la actividad de educción. Esto es, los analistas con conocimiento tienden a ser más efectivos en los dominios de problema conocidos. En lo que respecta a la titulación académica, por falta de diversidad en las titulaciones académicas de los sujetos experimentales no es posible alcanzar una conclusión. Hemos podido explorar el efecto de la titulación académica en sólo dos cuasi-experimentos, sin embargo, nuestros resultados arrojan efectos contradictorios (r = 0.694, p-valor = 0.51 y r = -0.266, p-valor = 0.383). Además de las variables estudiadas indicadas anteriormente, hemos confirmado la existencia de variables moderadoras que afectan a la actividad de educción, tales como el entrevistado o la formación. Nuestros datos experimentales confirman que el entrevistado es un factor clave en la actividad de educción. Estadísticamente ejerce una influencia significativa en la efectividad de los analistas (p-valor= 0.000). La diferencia entre entrevistar a uno u otro entrevistado, en unidades naturales, varía entre un 18% - 23% en efectividad. Por otro lado, la formación en requisitos aumenta considerablemente la efectividad de los analistas. Los sujetos que realizaron la educción de requisitos después de recibir una formación específica en requisitos tienden a ser entre un 12% y 20% más efectivos que aquellos que no la recibieron. El efecto es significativo (p-valor = 0.000). Finalmente, hemos observado tres hechos que podrían influir en los resultados de esta investigación. En primer lugar, la efectividad de los analistas es diferencial dependiendo del tipo de elemento del dominio. En dominios conocidos, los analistas con experiencia tienden a adquirir más conceptos que los analistas noveles. En los dominios desconocidos, son los procesos los que se adquieren de forma prominente. En segundo lugar, los analistas llegan a una especie de “techo de cristal” que no les permite adquirir más información. Es decir, el analista sólo reconoce (parte de) los elementos del dominio del problema mencionado. Este hecho se observa tanto en el dominio de problema desconocido como en el conocido, y parece estar relacionado con el modo en que los analistas exploran el dominio del problema. En tercer lugar, aunque los años de experiencia no parecen predecir cuán efectivo será un analista, sí parecen asegurar que un analista con cierta experiencia, en general, tendrá una efectividad mínima que será superior a la efectividad mínima de los analistas con menos experiencia. Conclusiones: Los resultados obtenidos muestran que en dominios desconocidos, la experiencia por sí misma no determina la efectividad de los analistas de requisitos. En dominios conocidos, la efectividad de los analistas se ve influenciada por su experiencia en entrevistas y requisitos, aunque sólo parcialmente. Otras variables influyen en la efectividad de los analistas, como podrían ser las habilidades débiles. El conocimiento del dominio del problema por parte del analista ejerce un efecto positivo en la efectividad de los analistas, e interacciona positivamente con la experiencia incrementando aún más la efectividad de los analistas. Si bien no fue posible obtener conclusiones sólidas respecto al efecto de la titulación académica, si parece claro que la formación específica en requisitos ejerce una importante influencia positiva en la efectividad de los analistas. Finalmente, el analista no es el único factor relevante en la actividad de educción. Los clientes/usuarios (entrevistados) también juegan un rol importante en el proceso de generación de información. ABSTRACT Context: This PhD dissertation addresses requirements elicitation activity. Requirements elicitation is generally acknowledged as one of the most important activities of the requirements process, having a direct impact in the software quality. It is an activity where the communication among stakeholders (analysts, customers, users) is paramount. The analyst’s ability to effectively understand customers/users’ needs represents a critical factor for the success of software development. The literature has focused on studying and comprehending a specific set of personal skills that the analyst must have to perform requirements elicitation effectively. However, few studies have explored those skills from an empirical viewpoint. Goal: This research aims to study the effects of experience, domain knowledge and academic qualifications on the analysts’ effectiveness when performing requirements elicitation, during the first stages of analyst-customer interaction. Research method: We have conducted eight empirical studies, quasi-experiments (four) and controlled experiments (four). 110 experimental subjects participated, including: graduate students with the Escuela Técnica Superior de Ingenieros Informáticos of the Universidad Politécnica de Madrid, as well as researchers and professionals. The experimental tasks consisted in elicitation sessions about one or several problem domains (ignorant and/or aware for the subjects). Elicitation sessions were conducted using unstructured interviews. After each interview, the subjects reported in written all collected information. Results: In ignorant domains, the analyst’s experience (interviews, requirements, development and professional) does not influence her effectiveness. In aware domains, interviewing experience (r = 0.34, p-value = 0.080) and requirements experience (r = 0.22, p-value = 0.279), make a positive effect, i.e.: the analysts with more years of interviewing/requirements experience tend to achieve higher effectiveness. On the other hand, development experience (r = -0.06, p-value = 0.765) and professional experience (r = -0.35, p-value = 0.077) tend to make a null and negative effect, respectively. On what regards the analyst’s problem domain knowledge, it makes a modest positive effect (r=0.31), statistically significant (p-value = 0.029) on the effectiveness of the elicitation activity, i.e.: the analysts with tend to be more effective in problem domains they are aware of. On what regards academic qualification, due to the lack of diversity in the subjects’ academic degrees, we cannot come to a conclusion. We have been able to explore the effect of academic qualifications in two experiments; however, our results show opposed effects (r = 0.694, p-value = 0.51 y r = -0.266, p-value = 0.383). Besides the variables mentioned above, we have confirmed the existence of moderator variables influencing the elicitation activity, such as the interviewee and the training. Our data confirm that the interviewee is a key factor in the elicitation activity; it makes statistically significant effect on analysts’ effectiveness (p-value = 0.000). Interviewing one or another interviewee represents a difference in effectiveness of 18% - 23%, in natural units. On the other hand, requirements training increases to a large extent the analysts’ effectiveness. Those subjects who performed requirements elicitation after specific training tend to be 12% - 20% more effective than those who did not receive training. The effect is statistically significant (p-value = 0.000). Finally, we have observed three phenomena that could have an influence on the results of this research. First, the analysts’ effectiveness differs depending on domain element types. In aware domains, experienced analysts tend to capture more concepts than novices. In ignorant domains, processes are identified more frequently. Second, analysts get to a “glass ceiling” that prevents them to acquire more information, i.e.: analysts only identify (part of) the elements of the problem domain. This fact can be observed in both the ignorant and aware domains. Third, experience years do not look like a good predictor of how effective an analyst will be; however, they seem to guarantee that an analyst with some experience years will have a higher minimum effectiveness than the minimum effectiveness of analysts with fewer experience years. Conclusions: Our results point out that experience alone does not explain analysts’ effectiveness in ignorant domains. In aware domains, analysts’ effectiveness is influenced the experience in interviews and requirements, albeit partially. Other variables influence analysts’ effectiveness, e.g.: soft skills. The analysts’ problem domain knowledge makes a positive effect in analysts’ effectiveness; it positively interacts with the experience, increasing even further analysts’ effectiveness. Although we could not obtain solid conclusions on the effect of the academic qualifications, it is plain clear that specific requirements training makes a rather positive effect on analysts’ effectiveness. Finally, the analyst is not the only relevant factor in the elicitation activity. The customers/users (interviewees) play also an important role in the information generation process.

Seed and vegetative propagation methods for the rare Florida native species Chionanthus pygmaeus (pygmy fringetree)

Chionanthus pygmaeus Small (pygmy fringetree) (Oleaceae) is an endemic and rare Florida species, which has an attractive, small habit giving it great potential for use in managed landscapes. Members of the genus Chionanthus are difficult to propagate via cuttings and possess complex seed dormancies that are not well understood. Conservation of pygmy fringetree and its potential for commercial propagation for use in managed landscapes is contingent on a better understanding of its complex seed dormancy and enhancement of its propagation. I conducted two experiments to assess sexual and asexual propagation methods for pygmy fringetree. The first experiment was conducted to determine what factors are involved in overcoming seed dormancy. Various scarification treatments, which mimicked conditions seeds are exposed to in the wild, were investigated to determine their effects on germination of 20-year-old seeds originally collected from the species’ native range. Treatments included endocarp removal, sulfuric acid, boiling-water, and smoke-water treatments. Prior to treatment initiation, seed viability was estimated to be 12%. Treated seeds went through two cold- and two warm-stratification periods of 4°C and 25°C, respectively, in a dark growth chamber. After 180 days, none of the treatments induced early germination. Seeds were then tested for viability, which was 11%. Seed dormancy of the species is apparently complex, allowing some of the seeds to retain some degree of viability, but without dormancy requirements satisfied. The second experiment was conducted to assess if pygmy fringetree could be successfully propagated via hardwood or root cuttings if the appropriate combination of environmental conditions and hormones were applied. Hardwood and root cuttings were treated with either 1000 ppm IBA talc, 8000 ppm IBA talc, or inert talc. All cuttings were placed on a mist bench in a greenhouse for 9 weeks. Hardwood cuttings were supplemented with bottom heat at 24 °C. No treatments were successful in inducing adventitious root formation. I conclude that pygmy fringetree seeds possess complex dormancy that was not able to be overcome by the treatments utilized. However, this result is confounded by the age of the seeds used in the experiment. I also conclude that vegetative propagation of pygmy fringetree is highly dependent on the time of year cuttings are harvested. Further research of both seed and asexual propagation methods need to be explored before pygmy fringetree can be propagated on a commercial scale.

A randomised controlled trial evaluating a rehabilitation complex intervention for patients following intensive care discharge: the RECOVER study.

Introduction: Patients who survive an intensive care unit admission frequently suffer physical and psychological morbidity for many months after discharge. Current rehabilitation pathways are often fragmented and little is known about the optimum method of promoting recovery. Many patients suffer reduced quality of life. Methods and analysis: The authors plan a multicentre randomised parallel group complex intervention trial with concealment of group allocation from outcome assessors. Patients who required more than 48 h of mechanical ventilation and are deemed fit for intensive care unit discharge will be eligible. Patients with primary neurological diagnoses will be excluded. Participants will be randomised into one of the two groups: the intervention group will receive standard ward-based care delivered by the NHS service with additional treatment by a specifically trained generic rehabilitation assistant during ward stay and via telephone contact after hospital discharge and the control group will receive standard ward-based care delivered by the current NHS service. The intervention group will also receive additional information about their critical illness and access to a critical care physician. The total duration of the intervention will be from randomisation to 3 months postrandomisation. The total duration of follow-up will be 12 months from randomisation for both groups. The primary outcome will be the Rivermead Mobility Index at 3 months. Secondary outcomes will include measures of physical and psychological morbidity and function, quality of life and survival over a 12-month period. A health economic evaluation will also be undertaken. Groups will be compared in relation to primary and secondary outcomes; quantitative analyses will be supplemented by focus groups with patients, carers and healthcare workers. Ethics and dissemination: Consent will be obtained from patients and relatives according to patient capacity. Data will be analysed according to a predefined analysis plan.

A doorway to Borromean halo nuclei: the Samba configuration

We exploit the possibility of new configurations in three-body halo nuclei, Samba type (the neutron-core form a bound system) as a doorway to Borromean systems. The nuclei Be-12, B-15, N-23 and F-27 are of such nature, in particular N-23 with a half-life of 37.7 s and a halo radius of 6.07 fm is an excellent example of Samba-halo configuration. The fusion below the barrier of the Samba halo nuclei with heavy targets could reveal the so far elusive enhancement and a dominance of one-neutron over two-neutron transfers, in contrast to what was found recently for the Borromean halo nucleus He-6 + U-238.

The scientific rationale, design and implementation plan for a Biogeochemical-Argo float array

Biogeochemical-Argo is the extension of the Argo array of profiling floats to include floats that are equipped with biogeochemical sensors for pH, oxygen, nitrate, chlorophyll, suspended particles, and downwelling irradiance. Argo is a highly regarded, international program that measures the changing ocean temperature (heat content) and salinity with profiling floats distributed throughout the ocean. Newly developed sensors now allow profiling floats to also observe biogeochemical properties with sufficient accuracy for climate studies. This extension of Argo will enable an observing system that can determine the seasonal to decadal-scale variability in biological productivity, the supply of essential plant nutrients from deep-waters to the sunlit surface layer, ocean acidification, hypoxia, and ocean uptake of CO2. Biogeochemical-Argo will drive a transformative shift in our ability to observe and predict the effects of climate change on ocean metabolism, carbon uptake, and living marine resource management. Presently, vast areas of the open ocean are sampled only once per decade or less, with sampling occurring mainly in summer. Our ability to detect changes in biogeochemical processes that may occur due to the warming and acidification driven by increasing atmospheric CO2, as well as by natural climate variability, is greatly hindered by this undersampling. In close synergy with satellite systems (which are effective at detecting global patterns for a few biogeochemical parameters, but only very close to the sea surface and in the absence of clouds), a global array of biogeochemical sensors would revolutionize our understanding of ocean carbon uptake, productivity, and deoxygenation. The array would reveal the biological, chemical, and physical events that control these processes. Such a system would enable a new generation of global ocean prediction systems in support of carbon cycling, acidification, hypoxia and harmful algal blooms studies, as well as the management of living marine resources. In order to prepare for a global Biogeochemical-Argo array, several prototype profiling float arrays have been developed at the regional scale by various countries and are now operating. Examples include regional arrays in the Southern Ocean (SOCCOM ), the North Atlantic Sub-polar Gyre (remOcean ), the Mediterranean Sea (NAOS ), the Kuroshio region of the North Pacific (INBOX ), and the Indian Ocean (IOBioArgo ). For example, the SOCCOM program is deploying 200 profiling floats with biogeochemical sensors throughout the Southern Ocean, including areas covered seasonally with ice. The resulting data, which are publically available in real time, are being linked with computer models to better understand the role of the Southern Ocean in influencing CO2 uptake, biological productivity, and nutrient supply to distant regions of the world ocean. The success of these regional projects has motivated a planning meeting to discuss the requirements for and applications of a global-scale Biogeochemical-Argo program. The meeting was held 11-13 January 2016 in Villefranche-sur-Mer, France with attendees from eight nations now deploying Argo floats with biogeochemical sensors present to discuss this topic. In preparation, computer simulations and a variety of analyses were conducted to assess the resources required for the transition to a global-scale array. Based on these analyses and simulations, it was concluded that an array of about 1000 biogeochemical profiling floats would provide the needed resolution to greatly improve our understanding of biogeochemical processes and to enable significant improvement in ecosystem models. With an endurance of four years for a Biogeochemical-Argo float, this system would require the procurement and deployment of 250 new floats per year to maintain a 1000 float array. The lifetime cost for a Biogeochemical-Argo float, including capital expense, calibration, data management, and data transmission, is about $100,000. A global Biogeochemical-Argo system would thus cost about $25,000,000 annually. In the present Argo paradigm, the US provides half of the profiling floats in the array, while the EU, Austral/Asia, and Canada share most the remaining half. If this approach is adopted, the US cost for the Biogeochemical-Argo system would be ~$12,500,000 annually and ~$6,250,000 each for the EU, and Austral/Asia and Canada. This includes no direct costs for ship time and presumes that float deployments can be carried out from future research cruises of opportunity, including, for example, the international GO-SHIP program (http://www.go-ship.org). The full-scale implementation of a global Biogeochemical-Argo system with 1000 floats is feasible within a decade. The successful, ongoing pilot projects have provided the foundation and start for such a system.