CO2 emissions from the combustion of native Australian trees

Carbon dioxide (CO2), as a primary product of combustion, is a known factor affecting climate change and global warming. In Australia, CO2 emissions from biomass burning are a significant contributor to total carbon in the atmosphere and therefore, it is important to quantify the CO2 emission factors from biomass burning in order to estimate their magnitude and impact on the Australian atmosphere. This paper presents the quantification of CO2 emission factors for five common tree species found in South East Queensland forests, as well as several grasses taken from savannah lands in the Northern Territory of Australia, under controlled ‘fast burning’ and ‘slow burning’ laboratory conditions. The results showed that CO2 emission factors varied according to the type of vegetation and burning conditions, with emission factors for fast burning being 2574 ± 254 g/kg for wood, 394 ± 40 g/kg for branches and leaves, and 2181 ± 120 g/kg for grass. Under slow burning conditions, the CO2 emission factors were 218 ± 20 g/kg for wood, 392± 80 g/kg for branches and leaves, and 2027 ± 809 g/kg for grass.

Collective dynamics and control of a 3-D small-world network with time delays

The paper presents a detailed analysis on the collective dynamics and delayed state feedback control of a three-dimensional delayed small-world network. The trivial equilibrium of the model is first investigated, showing that the uncontrolled model exhibits complicated unbounded behavior. Then three control strategies, namely a position feedback control, a velocity feedback control, and a hybrid control combined velocity with acceleration feedback, are then introduced to stabilize this unstable system. It is shown in these three control schemes that only the hybrid control can easily stabilize the 3-D network system. And with properly chosen delay and gain in the delayed feedback path, the hybrid controlled model may have stable equilibrium, or periodic solutions resulting from the Hopf bifurcation, or complex stranger attractor from the period-doubling bifurcation. Moreover, the direction of Hopf bifurcation and stability of the bifurcation periodic solutions are analyzed. The results are further extended to any "d" dimensional network. It shows that to stabilize a "d" dimensional delayed small-world network, at least a "d – 1" order completed differential feedback is needed. This work provides a constructive suggestion for the high dimensional delayed systems.

Teaching new product development to design led innovation

Recently many international tertiary educational programs have capitalised on the value design and business can have upon their interception (Martin, 2009; Brown, 2008; Bruce and Bessant, 2002; Manzini, 2009). This paper discusses the role that two teaching units – New Product Development and Design Led Innovation – play in forming an understanding of commercialisation needed in today’s Industrial Design education. These units are taught consecutively in the later years of the Bachelor of Industrial Design program at the Queensland University of Technology, Brisbane, Australia. In this paper, each teaching unit is discussed in detail and then as a conglomerate, in order to form a basis of knowledge students need in order to fully capitalise on the value design has in business, and to produce a more capable Industrial Design graduate of the future.

Technological Advances in Geotextiles

The role of polymer chemistry (pure and applied sciences) is very prominent in the world of science today, but it is heading away from polymers and polymer blends towards composites and nanocomposites. This allows for the creation of new materials with unique properties and new possibilities which is the subject of this new book.

Building capacity for 21st century engineering through curriculum renewal

At the 2012 CDIO conference, it was clear to all that engineering for 21st Century challenges and opportunities will be critical to the success of society over the next 2-3 decades, in dealing with pressures including climate change, resource depletion and urban densification. Within this context there is a growing imperative for rapid curriculum renewal towards education for sustainable development across all types and disciplines of engineering education, around the world. Building on a paper presented by these authors at the 2012 CDIO conference, this 2013 roundtable will draw on participants’ experiences to discuss how sustainability knowledge and skills can be embedded within a CDIO-based program using a holistic approach to curriculum renewal. The highly interactive and dynamic session will include two parts: 1) a short presentation from the chairs of the roundtable on an emergent model for rapid curriculum renewal; and 2) a facilitated discussion with participants about challenges and opportunities for action. Session notes will be recorded for distribution among participants following the conference.

Surface electromyography during physical exercise in water: A systematic review

Background Aquatic exercise has been widely used for rehabilitation and functional recovery due to its physical and physiological benefits. However, there is a high variability in reporting on the muscle activity from surface electromyographic (sEMG) signals. The aim of this study is to present an updated review of the literature on the state of the art of muscle activity recorded using sEMG during activities and exercise performed by humans in water. Methods A literature search was performed to identify studies of aquatic exercise movement. Results Twenty-one studies were selected for critical appraisal. Sample size, functional tasks analyzed, and muscles recorded were studied for each paper. The clinical contribution of the paper was evaluated. Conclusions Muscle activity tends to be lower in water-based compared to land-based activity; however more research is needed to understand why. Approaches from basic and applied sciences could support the understanding of relevant aspects for clinical practice.

Balancing exploration and exploitation in particle swarm optimization on search tasking

In this study we present a combinatorial optimization method based on particle swarm optimization and local search algorithm on the multi-robot search system. Under this method, in order to create a balance between exploration and exploitation and guarantee the global convergence, at each iteration step if the distance between target and the robot become less than specific measure then a local search algorithm is performed. The local search encourages the particle to explore the local region beyond to reach the target in lesser search time. Experimental results obtained in a simulated environment show that biological and sociological inspiration could be useful to meet the challenges of robotic applications that can be described as optimization problems.

In vitro micro propagation of Nicotiana benthamiana via axillary shoots

Axillary shoots of Nicotiana benthamiana were regenerated from nodal explants in two weeks using MS media supplemented with the cytokinin, kinetin (0.5 mg/L), and the auxin, indole-3-butyric acid (IBA) (0.1 mg/L). Ninety two percent of shoots were 2.1-20 mm tall, a size ideal for root induction. After transfer to hormone-free MS they readily produced roots within seven days, with phenotypically normal, fully developed plants being obtained within four weeks. Leaf chlorosis due to iron deficiency was observed in plants over time, however, this was overcome by doubling the concentration of inorganic iron. This rapid micro-propagation system is particularly useful for the in vitro mass production of N. benthamiana plants for various biotechnological applications.

Overview of design concepts of traditional Iranian architecture and its reflections in Iranian contemporary architecture

This article has attempted to investigate the patterns of traditional architecture in Iran's warm and dry climate and whether these patterns have been attended to in Iran's contemporary architecture or not. Since the two elements of culture and climate are much significant in Iran's traditional constructions, this article aimed at dealing with subjects such as the causes of the shapes of traditional buildings in Iran's warm and dry climate in constructions like houses, schools, mosques and bazaars, and why they were constructed in those shapes, and also considering their patterns in these places in the light of cultural and climatic aspects, and their cultural and climatic relationships and investigating cultural-climatic causes of the directions and situations designed for the spaces present in these buildings and finally it is intended to classify the conceptual patterns of the traditional architecture of Iran's warm and dry climate. The article is going to consider the amount of using these patterns in Iran's contemporary architecture. The study has been conducted using library and field method.

Effect of shoes' heel height on the energy cost during jogging

The purpose of this study is to examine the changes of energy cost during a high-heeled continuous jogging.Thirteen healthy female volunteers jointed in this study with heel height of the shoes varied from 1, 4.5 and 7 cm, respectively. Each subjects jogged on the treadmill with K4b2 portable gas analysis system. The results of this study showed that ventilnation, relative oxygen consumption and energy expenditure increased with the increase of heel height and these values shows significantly larger when the heel height reached to 7 cm. Present study suggest that wearing high heel shoes jogging could directly increase energy consumption, causing neuromuscular fatigue.

Käsityksistä ajatuksen poluille : Ammattikorkeakoulun tutkimus- ja kehitystoiminnan kehittäminen

This study deals with the formation of the idea of research and development (r&d) activity at one particular university of applied sciences in Finland. In this study I proceed from examining the conceptions of management regarding r&d-activities to exploring the development of the complex concept that guides these r&d-activities. The aim of this study is, first, to describe conceptions of r&d-activities, and then, second, to describe the formation of a new concept for r&d-activities in one field of study at the university of applied sciences. I used phenomenographic analysis to elucidate the conceptions and collected the data in interviews of personnel (22) who belong to the management of the university of applied sciences. The data for analysing the obstacles faced and the ways of overcoming them during the formation process of the new concept consist of the video-recorded material from ten change laboratory sessions held for the specific field of study at the university of applied sciences. In researching the formation of the concept of the activity, such research and analysis methods are used in which the concept is understood as a material construction, and with the help of which one can work out the formation of the concept during the development process. When the systematic development of the r&d-work was underway, the management of the university of applied sciences held differing views regarding the content, target, factors and organisation of the r&d-activities, as well as regarding the position of dissertations as a part of r&d-activity. Obstacles for developing rd concerned the unclear object and outcomes of the new activity, not having the tools (such as adequate know-how) for the new activity and not having found the necessary solutions for the distribution of work. In addition the rules that quide the activities of the university of applied sciences did not support working according to the new way. To improve r&d-activity, the school’s management defined three development strategies to encourage adequate rd-activity to support working life, regional development and learning. The strategies were based on the expansion of existing methods, such as service activities, dissertation work and the research activities of the teachers. Of the three possible routes, the concept of dissertation in this study was expanded to integrate the services of organisation development and the occupational growth of the students. A group of teachers in the field of social and health studies participated in the development work. The change laboratory method was used as a tool for this work. Analysis of the cognitive trails indicated that, in addition to the cycle of expansive learning activities, microcycles with different purposes can exist. According to Cussins (1992), something already in existence in each microcycle is destabilised, and something else is stabilised to replace it. In this study three microcycles were identified, during which the teachers first destabilised the existing concepts of dissertation work that guided their thinking, and then began to use new concepts to structure their thinking. Secondly, they undermined the existing concepts with material structure that defined their practical work, and developed new practical models to replace them. Thirdly, the problems accumulating in researching and testing the new activities caused the developers to destabilise the r&d-strategies of the university of applied sciences and to define a new conceptual model for r&d-work in the field. During this third cycle, the teachers developed a research arena model, which was a significant expansive innovation. In the cognitive trails developing the new concept for the r&d-activity, the teachers indeed faced the obstacles the management had described as their conceptions. These obstacles manifested themselves as contradictions. During the development process, the nature of the obstacles (i.e. contradictions) changed as the development proceeded. Solving the first and second degree contradictions highlighted the third and fourth degree contradictions. To overcome the obstacles, the teachers had to to articulate the value and motive of the development work throughout the development process. Developing the new concept for r&d-activity required many reconfigurations of practical solutions to overcome the obstacles. Developing the new concept for r&d-activity, both at the level of representations and of new practices, requires universities of applied sciences to adopt new methods in which the actors are partake in construction of new concepts of activity through adequate discussion, analysis and debate. R&d -activity can progress, if instead of implementing partial solutions, the totality of the activities (i.e. the group of partial solutions acting together) will be constructed. The development of the activity system requires many simultaneous changes as well as wide-ranging know-how and discussion related to these changes. What is perhaps most important, however, is that the group of developers mature into a determined collective actor which can engage in many agentive actions. The development of the agency is fundamental to progress.