Análise comparativa do ambiente de aviários de postura com diferentes sistemas de acondicionamento

Poulty house typology and the materials used (mainly for roofing) are the determining factors for an appropriate thermal condition aiming at production. In this context, the main point of this paper was to identify differences in the internal environment of two poultry houses, using monitoring and afterwards using statistics for comparing the environmental variables. The data analyzed did not show evidence of better thermal comfort for the house which was covered with ceramic roofing tile, because this house did not have ridged vents, making the hot air exit from the house difficult by the chimney effect. The ammonia concentration measured inside both houses was within the comfort limit. The temperature and humidity index of the house covered with ceramic roofing tiles was higher than the house which was covered with cement asbestos roofing tile, even though lower temperature on the tiles' surfaces was verified, showing the positive effects of the use of ridge vents at the housing. Based on the results obtained it is recommended for the Bastos, SP region, that poulty houses should be built with the ridge vent and long eaves beyond the roof of ceramic tiles.

Argilas da formação Corumbataí como base para obtenção de grés porcelanato por via seca

Pós-graduação em Geologia Regional - IGCE

Ocorrência de fungos negros em ambientes domésticos

Black fungi are able to adapt to extreme environmental conditions, such as: high temperatures, the presence of toxic chemical substances and lack of nutrients. Besides, they are also potential pathogens to humans. The natural environment of many black fungi is still unknown and some studies are being conducted to evaluate the biodiversity of this group and their different habitats. This study aimed to isolate black fungi in domestic environments and facilities, such as toothbrushes, fridge sealing rubbers, bathroom strainers and divisions, windows, wall tiles and bath sponge. For the collection, material surfaces were scratched with a scalpel and the resulting fragments were sewed in Mycosel agar (DifcoTM), supplemented with actidione to inhibit the growth of highly-sporulating fungi. Plates were incubated at 25ºC for three weeks. The 46 isolated fungi were maintained on MA2% slants at 8ºC and cryopreserved at -80ºC. Fungal identification was performed through the analysis of macro and microscopic features and ITS rDNA sequencing. The following black fungi taxa were found: Ascomycota sp., Cladosporium spp., Dothideomycete sp., Exophiala alcalophila, Ochroconis mirabilis and Rhinocladiella atrovirens. Non-melanized fungi were also found, such as Geosmithia sp., Penicillium sp. and Rhodotorula mucilaginosa. The temperature tests showed that isolated black fungi were not able to grow at 37°C, however, this temperature proved to be fungistatic to 43% of them. According to literature, all black fungi isolated in this study are opportunistic pathogens and additional studies are necessary to evaluate the risk that these micro-organisms offer to health, once they were isolated from domestic environments

Ocorrência de fungos negros em ambientes domésticos

Black fungi are able to adapt to extreme environmental conditions, such as: high temperatures, the presence of toxic chemical substances and lack of nutrients. Besides, they are also potential pathogens to humans. The natural environment of many black fungi is still unknown and some studies are being conducted to evaluate the biodiversity of this group and their different habitats. This study aimed to isolate black fungi in domestic environments and facilities, such as toothbrushes, fridge sealing rubbers, bathroom strainers and divisions, windows, wall tiles and bath sponge. For the collection, material surfaces were scratched with a scalpel and the resulting fragments were sewed in Mycosel agar (DifcoTM), supplemented with actidione to inhibit the growth of highly-sporulating fungi. Plates were incubated at 25ºC for three weeks. The 46 isolated fungi were maintained on MA2% slants at 8ºC and cryopreserved at -80ºC. Fungal identification was performed through the analysis of macro and microscopic features and ITS rDNA sequencing. The following black fungi taxa were found: Ascomycota sp., Cladosporium spp., Dothideomycete sp., Exophiala alcalophila, Ochroconis mirabilis and Rhinocladiella atrovirens. Non-melanized fungi were also found, such as Geosmithia sp., Penicillium sp. and Rhodotorula mucilaginosa. The temperature tests showed that isolated black fungi were not able to grow at 37°C, however, this temperature proved to be fungistatic to 43% of them. According to literature, all black fungi isolated in this study are opportunistic pathogens and additional studies are necessary to evaluate the risk that these micro-organisms offer to health, once they were isolated from domestic environments

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Estudo da adição de resíduo de scheelita em matriz cerâmica: formulação, propriedades físicas e microestrutura

Extractivism mineral is considered an activity highly degrading, due to the large volume of material that he moves in the form of ore and residues. The vast majority of mining companies do not show any technology or economically viable application that will allow the recycling of mineral residue, these being launched in areas receiving located the "open skies" degrade the environment. In Rio Grande do Norte to the production of ceramic red restricts their activities to the production of products such as: solid bricks, ceramic blocks, tiles, among others. Seeking to unite experiences and technical information that favor sustainable development, with important benefits to the construction sector and civil society in general, the present work studies the incorporation of the residue of scheelite in ceramic matrix kaolinitic, coming from the municipality of Boa Saúde - RN, in percentage of 5 %, 10 %, 20 %, 30% 40% and 50 %, by evaluating its microstructure, physical properties and formulation. The raw materials were characterized through the trials of X ray fluorescence, Diffraction of X rays, Differential Thermal Analysis and Termogravimetric Analysis. The samples were formed and fired at temperatures of 850o, 900o, 1000o, 1050o, 1100o, 1150o and 1200 oC, with isotherm of 1 hour and heating rate of 10 oC/min. Assays were performed technological of loss to fire, Water Absorption, Apparent Porosity, Apparent Density, Mass Loss in Fire and Bending Resistance; in addition to the Scanning Electron Microscopy, analyzing their physical and mechanical properties. The use of residue of scheelite in ceramic mass kaolinitic provided a final product with technological properties that meet the technical standards for the production of bricks and roofing tiles, with the percentage of 20% of waste that showed the best results

Mineralogical analysis of ceramic tiles by FTIR: A quantitative attempt

A method for quantitative mineralogical analysis by ATR-FTIR has been developed. The method relies on the use of the main band of calcite as a reference for the normalization of the IR spectrum of a mineral sample. In this way, the molar absorptivity coefficient in the Lambert–Beer law and the components of a mixture in mole percentage can be calculated. The GAMS equation modeling environment and the NLP solver CONOPT (©ARKI Consulting and Development) were used to correlate the experimental data in the samples considered. Mixtures of different minerals and gypsum were used in order to measure the minimum band intensity that must be considered for calculations and the detection limit. Accordingly, bands of intensity lower than 0.01 were discarded. The detection limit for gypsum was about 7% (mol/total mole). Good agreement was obtained when this FTIR method was applied to ceramic tiles previously analyzed by X-ray diffraction (XRD) or mineral mixtures prepared in the lab.

Leadless decorative tiles, faience, and mosaic, comprising notes and excerpts on the history, materials, manufacture & use of ornamental flooring tiles, ceramic mosaic, and decorative tiles and faience, with complete series of recipes for tile-bodies, and for leadless glazes and art-tile enamels,

Mode of access: Internet.

Efeito da adição de feldspato e/ou resíduo de caulin em formulações à base de argila ilítica

The red pottery industry in Piauí state is well developed and stands out at the national context for the technical quality of its products. The floor and wall tile industry, however, is little developed since the state has only one company that produces red clay-based ceramic tiles. This thesis aims at using the predominantly illitic basic mass of the above mentioned industry, with the addition of feldspar and/or kaolin residue in order to obtain products of higher technical quality. Kaolin residue consists basically of kaolinite, muscovite mica and quartz; the feldspar used was potassic. In this experiment, basic mass (MB) was used for experimental control and fifteen formulations codified as follows: F2, F4, F8, F16, F32, FR2, FR4, FR8, FR16, FR32, R2, R4, R8, R16 and R32. All raw materials were dry-milled, classified, formulated and then humidified to 10% water. Thereafter, test samples were produced by unixial pressing process in a rectangular steel matrix (60.0 x 20.0 x 5.0) mm3 at (25 MPa). They were fired at four temperatures: 1080°C, 1120°C, 1160°C, with a heating rate of 10°C/min during up to 10 min in an electric oven, and the last one in an industrial oven with a peak of 1140°C, aim ing to confirm the results found in laboratory and, finally, technological tests were performed: MEA, RL, AA, PA, TRF and PF. The results revealed that the residue under study can be considered a raw material with large potential in the industry of red clay-based ceramic tiles, since the results found both in laboratory and in the industry have shown that the test samples produced from the formulations with up to 4% feldspar and those produced with up to 8% feldspar and residue permitted a reduction in the water absorption rate and an increase in the mechanical resistance while those samples produced with up to 4% residue had an increase in the mechanical resistance when compared to those produced from the basic mass and that the formulation with 2% feldspar and residue presented the best technological properties, lowering the sintering temperature down to 1120°C