Análise do Comportamento Mecânico de Concretos Produzidos com Incorporação de Cinza do Bagaço da Cana-de-Açúcar de Variedades SP911049, RB92579 E SP816949

Concrete is the second most consumed product in the world and the incorporation of the Sugar Bagasse Ash (SBA) into this material can provide solutions for the utilization of by-products from other industries, thus reducing the environmental impact. The general aim of this dissertation focuses on analyzing the mechanical behavior of concrete with addition of SBA from three different species of sugar cane, through tests of consistency, compressive strength, porosity, absorption, voids and Scanning Electron Microscopy (SEM). Were prepared 13 specimens for each specific pattern and level of incorporation of SBA (10%, 20% and 30%) of the three varieties collected, totaling 130 samples of concrete. The trait was employed 1:2:3 (cement: sand: aggregates) in relation to the cement mass with a water / cement ratio of 0.532 and 1% additive Tec 400 Mult also based on the weight of cement. According to the results obtained in this study, it was concluded that the variety of cane sugar, used in the production of the CBC, influenced the mechanical behavior of the resulting concrete. All concrete with addition of SBA, reported a reduction of at least 10% in the properties related to permeability and an increase in the compressive strength of at least 16% compared to standard concrete at 28 days

Estudo da viabilidade da utilização de cinza de lodo de esgoto como adição em argamassa de cimento Portland

The use of sewage sludge as a raw material falls within the waste recycling key in the current process model environmental sustainability .Waste recycling has been consolidated as a sustainable environmentally sound technical solution, and. Despite showing very variable composition and characteristics, sewage sludge, can be considered as a residue with a high recycling potential in the building sector. In this paper the feasibility of using sewage sludge ash was studied in addition to Portland cement mortar in 1:3 mass considered the standard dash. This gray additions were studied in proportions of 5%, 10 %, 15 %, 20 %, 25% and 30% by mass of cement. The methodology was focused on the characterization of materials by physical, chemical , mechanical , environmental and morphological followed by the production of mortar tests ,and finalized by the characterization tests of mortar in the fresh state, through the consistency index, content of entrained air, bulk density and water retention, and in the hardened state by bulk density, water absorption by capillarity capillarity coefficient, compressive strength, tensile strength in bending ,tensile bond strength and microstructural analysis for percentages of 0 to 20%. After comparing with the standard mortar mortars with addition of ash, it is concluded that the ash of sewage sludge did not impair the integrity and properties of mortars with addition, including increasing resistance to compression and tension, being 20% more indicated percentage. Thus, it becomes feasible the addition of sewage sludge ash in Portland cement mortar for the trait studied

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes

Obtenção de placas cerâmico a partir de formulações de massas triaxiais de resíduos de caulim, chamote de telha e cinza vegetal

The production of red ceramic is an industrial activity that causes an intense impact. The manufacture of its products considerably increases the demand for natural resources, mainly with the extraction of raw material. The ceramic material produced generates waste, such as ash firewood and chamote. The residue from the beneficiation of kaolin is deposited in a poor, degrades the environment and contaminate water sources and soil, constituting in this manner, ecological disasters. The main objective of this work is to develop the formulation of a ceramic product consisting solely of industrial solid wastes, from ceramic tiles, (chamote) residue of kaolin and ash firewood. It is assumed that this product made in the laboratory can be used in coatings, wall and floor. The aim is to facilitate the replacement of the raw material of original composition of a ceramic body, for waste, while the process of production equal to the conventionally used, so that the properties of the product are reproduced. This work is characterized waste as its chemical composition, analysis of particle size, X-ray diffraction and thermal behavior. Several formulations were studied. The mass of waste was prepared by dry process, pressed to 25 MPa, and then burned in muffle type oven to 850, 950, 1050 and 1150 °C. The results showed that it is technically possible to produce porous tiles only with waste. It was found that the formulations of bodies play a key role in the properties of the final product, as well as the sintering temperature and heating rates. RN in the waste of kaolin is estimated at 15,000 t/month, about 3,000 gray t/month and chamote with 10 million pieces/month damaged. The presence of carbonates of calcium and magnesium at 1050 ° C results in an appropriate porosity and mechanical strength. The formulation M3JE, composed of 69% waste of kaolin, 7.7% and 23.3% of chamote of gray, became suitable for porous materials with the strength and absorption within the level of national and international standards

Aproveitamento de resíduos de cinza da cana de açúcar em massas cerâmicas

This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eunápolis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250ºC. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100°C, 1150°C, 1200°C and 1250°C, for the specimens with the ashes without ash and 1150° C and 1200° C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash

Estudo da introdução de resíduo de britagem de rocha calcária e cinza de biomassa de cana-de-açúcar em formulações de argamassas colantes

The adhesive mortars are a mixture of cement, sand, and additives to polymers that retain the mixing water and promotes adherence, being used in setting on various ceramic substrates. The sand used in the production of these mortars is from the riverbeds, and with the increasing restriction of these sands extraction by environmental agencies, and often having to be transported over long distances to the consumer center. This work aims to design and physical and mechanical characterization of ecological adhesive mortar with total replacement of natural sand by sand from the crushing of limestone, and the addition of mineral ash biomass of cane sugar in partial replacement cement used in the production of adhesive mortar , aiming compositions that meet the regulatory specifications for use adhesive mortar. Standardized tests to determine the tensile bond strength (NBR 14081-4), determination of open time (NBR 14081-3) and determination of slip (NBR 14081-5) were performed. Were also conducted trials squeeze flow in different formulation, the mortar with addition of 15 % gray biomass of cane sugar for cement mortars as well as the total replacement of natural sand by sand limestone crushing, got the best performance among the mortars studied, it was found that the addition of biomass to replace cement is perfectly feasible due to its pozzolanic activity, which contributed to this reduction in the cement matrix formation of adhesive mortar

Comportamento de mergulho do boto-cinza, Sotalia guianensis, na enseada do Curral, Praia de Pipa-RN, Brasil :possíveis adaptações cardíacas ao mergulho

The marine tucuxi, Sotalia guianensis, is one of the smallest known cetaceans, has coastal habits, and occurs from Hondures to Santa Catarina, in southern Brazil. The objective of this dissertation was to describe diving behavior of the marine tucuxi in three age classes and to analyze the cardiac capacity to dive through the examination of hearts of stranded specimens. Observations were made from October 2004 to November 2005 from a vantage point, in Curral Bay at Pipa beach-RN. We used Ad Libitum sampling and All occurrences to record the behaviors. The diving was characterized by the total exposition of the tail fluke for a few seconds, in 90° or 45° angles. Were recorded 131 dives in three behavioral contexts: foraging, traveling and socialization. The difference between juveniles and adults in dive time and fluke out at 45° or 90° to search and/or capture prey is probably influenced by the strategy used and ability to capture the prey. The frequency of fluke out at 90° for foraging in adults may be related to increased physiological efficiency of adults in comparison to juveniles. However, in the context of travel and socialization the dive time and fluke out were independent between the age classes. Dive in calves were frequent during socialization (play behavior) and traveling. This, associated with synchronic calve-adult diving suggests that a relationship of these behaviors and the acquisition of experience and foraging skills. As observed in other cetaceans, the heart (n=12) of the estuarine dolphin is broad and presents long ventricles which form a round apex. The right ventricle is long and narrow. The degree of dilatation of the aortic bulb may support the heart during diastole. The characteristic morphology of the heart and short dive duration < 2 min and depth ranged from 10m in the estuarine dolphin, can be likely at physiological adaptation for diving, typical de dolphins with coastal habits. The limitation of diving time in this specie may be influenced by anatomical and physiological restrictions

Argilominerais: influência dos aditivos (cinza de bagaço de cana-de-acúcar e rocha sedimentar) no processo de sinterização

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Análise experimental da durabilidade de concretos de alto desempenho com adição de resíduo de borracha de pneu e cinza da casca de arroz

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do teor de cinza volante na reologia de argamassa de assentamento: fabricado com reciclagem de resíduos

As argamassas podem ser consideradas como um conjunto de partículas sólidas em suspensão (agregado miúdo), aglomerantes e água (pasta de cimento). Sendo assim, seu comportamento reológico durante a cura pode ser influenciado por fatores como a granulometria, composição e teor de água incorporado. Este trabalho estudou as características reológicas de seis composições de argamassas, em função do teor de cinza volante, como material de atividade pozolânica, em substituição parcial do cimento. A argamassa estudada utilizou como base agregado o resíduo da construção civil (RCC), devidamente caracterizado por difratometria e fluorescência de raios-X. Formularam-se composições de argamassas para os ensaios reológicos com adição de resíduo de construção civil (RCC) nas proporções de 95, 90, 85, 80, 75 e 70%; cinzas volantes (CV) 0, 5, 10, 15, 20 e 25% e 5% de Cimento Portland Comum (CP II- E 32), sendo que em cada amostra foi incorporado 35% de água. Utilizou-se o viscosímetro modelo VT 550, com sensor tipo cilindros coaxiais SV₁ – Haake a temperatura de 28ºC. Para avaliar o tempo de cura do material programou-se uma taxa de cisalhamento constante 53,4 s^-1 em 1h e 45min, sendo avaliado o torque em intervalos de 15min. Para a elaboração das curvas de fluxo e curvas de histerese, utilizou-se a taxa de cisalhamento entre 0 e 600 s^-1 no intervalo de tempo de 120s. Os resultados mostraram que a incorporação de cinza volante foi o principal fator para aumento do torque no tempo de cura das argamassas e mudança do comportamento de reópetico para tixotrópico, nos traços analisados. Os dados experimentais das formulações propostas ajustaram-se ao modelo reológico de Herschel-Bulkley.

Análise da durabilidade do concreto de alto desempenho com adição de cinza de casca de arroz e borracha de pneu

Since the Seventies, there has been a growing degradation of concrete structures in Brazil. For that reason, much research has been made on the durability of those structures, aiming at contributing towards quality improvement and reduction of maintenance and repair costs. This study evaluates the behavior of the durability of high-performance concrete with additions, replacing part of the cement and aggregates with rice husk ash and tire rubber, respectively. Durability tests were carried out in which concrete was subjected to several degradation processes, such as the action of water, temperature, salts and acid solution. The results indicated that the addition of active silica or rice husk ash, both with tire rubber did not worsen the durability of concrete. In fact, rubber proved to be very effective in preventing the action of chemical agents, high temperatures and the penetration of water. Rice husk ash, despite the larger diameter of particles, had similar results to that of the active silica.

Caracterização da cinza de bagaço de cana-de-açúcar e aplicação no solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Concreto com adição de cinza de bagaço de cana-de-açúcar

Pós-graduação em Engenharia Civil - FEIS

Concreto autoadensável utilizando cinza de casca de arroz: estudo das propriedades mecânicas

Pós-graduação em Engenharia Civil - FEIS

Estudo da influência da cinza de casca de arroz e da cal nas propriedades do solo-cimento auto-adensável

Pós-graduação em Engenharia Civil - FEIS