Rehabilitation of the Maxillary Arch After Bone Graft Using Immediate Loading With Implant-Supported Fixed Restoration

Moderate and controlled loading environments support or enhance osteogenesis, and, consequently, a high degree of bone-to-implant contact can be acquired. This is because when osteoprogenitor cells are exposed to limited physical deformation, their differentiation into osteoblasts is enhanced. Then, some range of microstrain is considered advantageous for bone ingrowth and osseointegration. The primary stability has been considered one of the main clinical means of controlling micromotion between the implant and the forming interfacial tissue, which helps to establish the proper mechanical environment for osteogenesis. Based on the biological aspects of immediate loading (IL), the objective of this study is to present a clinical case of maxillary arch rehabilitation using immediate loading with implant-supported fixed restoration after bone graft. Ten dental implants were placed in the maxilla 6 months after the autogenous bone graft, removed from the mandible (bilateral oblique line and chin), followed by the installation of an immediate-load fixed cross-arch implant-supported restoration because primary stability was reached for 8 implants. In addition, instructions about masticatory function and how it is related to interfacial micromotion were addressed and emphasized to the patient. The reasons for the IL were further avoidance of an interim healing phase, a potential reduction in the number of clinical interventions for the patient, and aesthetic reasons. After monitoring the rehabilitation for 8 years, the authors can conclude that maxillary IL can be performed followed by a well-established treatment planning based on computed tomography, providing immediate esthetics and function to the patient even when autogenous bone graft was previously performed in the maxilla.

Unilateral Condylar Hyperplasia: A Treatment Strategy

Condylar hyperplasia (CH) is a pathologic condition that causes overdevelopment of the condylar head and neck as well as the mandible. Slowly progressive unilateral enlargement of the head and the neck of the condyle causes crossbite malocclusion, facial asymmetry, and shifting of the midpoint of the chin to the unaffected side. The etiology and the pathogenesis of CH remain uncertain. The diagnosis is made by clinical and radiologic examinations and bone scintigraph. A difference in uptake of 10% or more between condyles is regarded as indicative of CH, and the affected condyles had a relative uptake of 55% or more. When the diagnosis of active CH is established, the treatment consists of removal of the growth center by a partial condylectomy. The authors present the case of a 46-year-old male patient with right active type II CH or hemimandibular hyperplasia who underwent a high condylectomy.

Assessment of postoperative pain after unilateral mastectomy using two different surgical techniques in dogs

Background: There are few studies reporting pain and postoperative analgesia associated with mastectomy in dogs. The aim of this study was to evaluate postoperative pain after unilateral mastectomy using two different surgical techniques in the dog.Findings: Twenty female dogs were assigned (n=10/group) to undergo unilateral mastectomy using either the combination of sharp and blunt dissection (SBD) or the modified SBD (mSBD) technique, in which the mammary chain is separated from the abdominal wall entirely by blunt (hand and finger) dissection except for a small area cranial to the first gland, in a prospective, randomized, clinical trial. All dogs were premedicated with intramuscular acepromazine (0.05 mg/kg) and morphine (0.3 mg/kg). Anesthesia was induced with intravenous ketamine (5 mg/kg) and diazepam (0.25 mg/kg), and maintained with isoflurane. Subcutaneous meloxicam (0.2 mg/kg) was administered before surgery. Postoperative pain was evaluated according to the University of Melbourne pain scale (UMPS) by an observer who was blinded to the surgical technique.. Rescue analgesia was provided by the administration of intramuscular morphine (0.5 mg/kg) if pain scores were > 14 according to the UMPS. Data were analyzed using t-tests and ANOVA (P>0.05). There were no significant differences between the groups for age, weight, extubation time, and duration of surgery and anesthesia (P>0.05). There were no significant differences for postoperative pain scores between groups. Rescue analgesia was required in one dog in each group.Conclusions: The two surgical techniques produced similar surgical times, incidence of perioperative complications and postoperative pain. Multimodal analgesia is recommended for treatment of postoperative pain in dogs undergoing unilateral mastectomy.

Biomechanical Loading Modulates Proinflammatory and Bone Resorptive Mediators in Bacterial-Stimulated PDL Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Three Types of Abutments on Preload Values Before and After Cyclic Loading with Structural Analysis by Scanning Electron Microscopy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Microstrain Around Dental Implants Supporting Fixed Partial Prostheses Under Axial and Non-Axial Loading Conditions, In Vitro Strain Gauge Analysis

The current study used strain gauge analysis to perform an in vitro evaluation of the effect of axial and non-axial loading on implant-supported fixed partial prostheses, varying the implant placement configurations and the loading points. Three internal hexagon implants were embedded in the center of each polyurethane block with in-line and offset placements. Microunit abutments were connected to the implants using a torque of 20 N.cm, and plastic prosthetic cylinders were screwed onto the abutments, which received standard patterns cast in Co-Cr alloy (n = 10). Four strain gauges (SGs) were bonded onto the surfaces of the blocks, tangentially to the implants: SG 01 mesially to implant 1, SG 02 and SG 03 mesially and distally to implant 2, respectively, and SG 04 distally to implant 3. Each metallic structure was screwed onto the abutments using a 10-N.cm torque, and axial and non-axial loads of 30 kg were applied at 5 predetermined points. The data obtained from the strain gauge analyses were analyzed statistically through the repeated measures analysis of variance and the Tukey test, with a conventional level of significance of P < 0.05. The results showed a statistically significant difference for the loading point (P = 0.0001), with point E (nonaxial) generating the highest microstrain (327.67 mu epsilon) and point A (axial) generating the smallest microstrain (208.93 mu epsilon). No statistically significant difference was found for implant placement configuration (P = 0.856). It was concluded that the offset implant placement did not reduce the magnitude of microstrain around the implants under axial and non-axial loading conditions, although loading location did influence this magnitude.

Estudo da correlação linear entre a dimensão da largura maxilar e as dimensões das larguras de outras grandezas, lineares, transversas da face, em portadores de fissura transforame incisivo unilateral, através da cefalometria radiográfica, em norma frontal

This research presents the results of a cephalometric radiography study, in frontal norm, that was used to measure the possible linear correlations between several linear dimensions of the face, in a sample of a 140 caucasian brazilians, with an average age of 20 years, who were distributed in 2 groups as follows: Control group - formed of 35 males and 35 females, with no apparent facial deformities and with dental oclusion, not necessarily, in Angle's Class I; Unilateral cleft lip and palate group - formed of 35 males and 35 females with surgical correction of the up in the first year and of the palate until the third year of life, without orthodontic treatment. ln each teleradiography, the following parameters were measured using a computer: - Lateral orbit width or external orbit width (LOe) - Medial orbit width or internal orbit width (LOI) - Zygomatic width or facial width (LZI) - Mastold width (LMa) - Maxilar width (LMx) - Nasal width (LNa) - Condilar width (LCo) - Antigonial width (LGa) The values obtained were treated statistically using quantitative analysis (arithmetic mean, standard deviation, standard mean error, Person's variation factor and Pearson factor linear correlation). Theirs significance was established by Student's t test. The Pearson factor linear correlations determined between transverse linear cephalometric width dimensions of face in frontal norm for individuals of both groups and sex, with an average age of 20 years, were: ...

A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Negligência unilateral pós-acidente vascular encefálico: atuação da Terapia Ocupacional

Unilateral Neglect Syndrome is one of the consequences of cerebral vascular accident (CVA) generally following right parietal lobe lesion, leading to the impairment of perceptive visual, spatial and attention functions. The patient affected does not realize the environmental stimuli on the contralesional hemibody. Occupational therapy plays an important role in caring for this patient, seeking the recovery of perception, attention and social engagement. This study aimed to describe and evaluate the results of occupational therapy intervention and treatment in a single Unilateral Neglect Syndrome post CVA patient. Data were obtained from a survey of the patient’s medical records and interviews of his therapist and caretaker. The analysis of the patient’s medical records and his therapist’s report showed that the patient responded satisfactorily to treatment, presenting a decrease of the left unilateral neglect at the end of the study period. The favorable outcome of the patient outlined the relevance of evaluating the effects of Occupational Therapy interventions for clinical unilateral neglect syndrome.

Effects of physiotherapy on balance and unilateral vestibular hypofunction in vertiginous elderly

Background: We aimed to analyze the effect of a physical therapy protocol on unilateral vestibular hypofunction and overall balance in elderly with vertigo. Methods: The study included nine subjects, four male subjects (68.5 ± 11.09 years old) and five females (72.4 ± 7.09 years old). It was used the performance-oriented Mobility Assessment (POMA), to evaluate the balance and the Unterberger – Fukuda test for analysis of unilateral vestibular dysfunction through rotations and displacements of the body. We developed and applied a structured physical therapy protocol, consisting of group exercises. Results: It was observed that after the protocol, all participants improved balance (33.9 ± 5.1 vs. 47.3 ± 7.6, p < 0.0001) and displacement (111.1 ± 38.0 vs. 53.3 ± 34.6, p = 0.0001). However, it was not found significant differences for rotation. Conclusion: The proposed protocol has contributed to an improvement in balance and vestibular dysfunction of the aged.

Resistance to impact of cross-linked denture base biopolymer materials: Effect of relining, glass flakes reinforcement and cyclic loading

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of immediate loading on healing of implants installed with different insertion torques - an experimental study in dogs

Objective: To evaluate the influence of different insertion torques on healing of implants loaded immediately or left unloaded.Material and methods: In six Labrador dogs, all mandibular premolars and molars were extracted. After 4 months of healing, flaps were elevated, and two implant sites were prepared at each side of the mandible. The distal sites were prepared conventionally while the mesial sites were underprepared by 0.3 mm. As a consequence, different final insertion torques of about 30 Ncm at the distal and >70 Ncm at the mesial sites were recorded. Healing abutments were applied to the left and transmucosal abutments to the right side. Flaps were sutured, crown preparation of the upper right second and third premolars was performed, and impressions were taken. Within 24 h, crowns were cemented both to implants and teeth in the right side of the mouth. After 4 months, the animals were sacrificed and ground sections obtained for histological evaluation.Results: A higher buccal bony crestal resorption and a more apical position of the coronal level of osseointegration were found at the loaded compared with the unloaded sites. MBIC% and percentages of peri-implant mineralized tissue (MB%) were higher at the loaded compared with the unloaded sites. Moreover, a higher MBIC% was found at the lower compared with the higher final insertion torque.Conclusions: Immediate loading does not seem to have a negative effect on osseointegration. High torque values for the immediate loading procedures were not necessary. Probably, low torque values, were sufficient to obtain primary stability and hence may provide better osseointegration than high torque value.