A Study on the liquefaction risk in seismic design of foundations

A fully coupled non-linear effective stress response finite difference (FD) model is built to survey the counter-intuitive recent findings on the reliance of pore water pressure ratio on foundation contact pressure. Two alternative design scenarios for a benchmark problem are explored and contrasted in the light of construction emission rates using the EFFC-DFI methodology. A strain-hardening effective stress plasticity model is adopted to simulate the dynamic loading. A combination of input motions, contact pressure, initial vertical total pressure and distance to foundation centreline are employed, as model variables, to further investigate the control of permanent and variable actions on the residual pore pressure ratio. The model is verified against the Ghosh and Madabhushi high acceleration field test database. The outputs of this work is aimed to improve the current computer-aided seismic foundation design that relies on ground’s packing state and consistency. The results confirm that on seismic excitation of shallow foundations, the likelihood of effective stress loss is greater in deeper depths and across free field. For the benchmark problem, adopting a shallow foundation system instead of piled foundation benefitted in a 75% less emission rate, a marked proportion of which is owed to reduced materials and haulage carbon cost.

Cross-sectoral differences in the drivers of innovation: evidence from the Irish Community Innovation Survey

Purpose: The purpose of this paper is to analyse differences in the drivers of firm innovation performance across sectors. The literature often makes the assumption that firms in different sectors differ in their propensity to innovate but not in the drivers of innovation. The authors empirically assess whether this assumption is accurate through a series of econometric estimations and tests. Design/methodology/approach: The data used are derived from the Irish Community Innovation Survey 2004-2006. A series of multivariate probit models are estimated and the resulting coefficients are tested for parameter stability across sectors using likelihood ratio tests. Findings: The results indicate that there is a strong degree of heterogeneity in the drivers of innovation across sectors. The determinants of process, organisational, new to firm and new to market innovation varies across sectors suggesting that the pooling of sectors in an innovation production function may lead to biased inferences. Research limitations/implications: The implications of the results are that innovation policies targeted at stimulating innovation need to be tailored to particular industries. One size fits all policies would seem inappropriate given the large degree of heterogeneity observed across the drivers of innovation in different sectors. Originality/value: The value of this paper is that it provides an empirical test as to whether it is suitable to group sectoral data when estimating innovation production functions. Most papers simply include sectoral dummies, implying that only the propensity to innovate differs across sectors and that the slope of the coefficient estimates are in fact consistent across sectors.

Decomposition, recomposition, speculation: The contribution of the Treatise of Choisy for the architectural survey, a pedagogical approach

info:eu-repo/semantics/inPress

Design, modelling, simulation and integration of cyber physical systems: methods and applications

The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine.

Estudo do design do selo postal português: proposta para aplicação de realidade aumentada

O presente projeto de investigação, propõe compreender a cultura visual contemporânea do design do selo postal português, de 2001 a 2013, considerando os avanços e os novos meios tecnológicos digitais. Para isso, partiu-se da história do selo postal como objeto de testemunho histórico, cultural e visual repleto de valores duradouros e possuidores de uma linguagem gráfica distinta. A esse conjunto de caraterísticas que determinam o selo postal, as mesmas, representam um grau de importância associados à história e à cultura de um país, evidenciando uma linguagem característica da vida social e da época que se encontra, que ao longo dos anos possuem valores de importância e sentimento para a humanidade. Primeiramente, procedeu-se a uma pesquisa exaustiva sobre os principais designers e ateliers portugueses, quer realizada em livros de coleções dos CTT, quer na internet em motores de busca. Seguidamente, realizou-se uma análise geral sobre a sintaxe da linguagem visual, baseada no trabalho de Donis A. Dondis (2003), declinada sobre a comunicação visual no design, para este caso, nos selos postais. Partindo dessa análise, posteriormente, efetuou-se a criação de uma emissão de selos postais juntamente com a tecnologia da realidade aumentada, tendo como base a temática centrada na cidade do Porto e que pode ser repercutida em diferentes cidades do país “Uma visita portuguesa com certeza”. Com este projeto conseguiu-se demonstrar e implementar uma tecnologia digital a um artefacto de cariz físico, usualmente, apresentado em suporte papel. O estudo pretende assim, contribuir para a inovação ao nível do design filatélico e histórico do selo postal português, tendo como base o uso dessa tecnologia.

Approximation Algorithms for Network Design and Orienteering

This thesis presents approximation algorithms for some NP-Hard combinatorial optimization problems on graphs and networks; in particular, we study problems related to Network Design. Under the widely-believed complexity-theoretic assumption that P is not equal to NP, there are no efficient (i.e., polynomial-time) algorithms that solve these problems exactly. Hence, if one desires efficient algorithms for such problems, it is necessary to consider approximate solutions: An approximation algorithm for an NP-Hard problem is a polynomial time algorithm which, for any instance of the problem, finds a solution whose value is guaranteed to be within a multiplicative factor of the value of an optimal solution to that instance. We attempt to design algorithms for which this factor, referred to as the approximation ratio of the algorithm, is as small as possible. The field of Network Design comprises a large class of problems that deal with constructing networks of low cost and/or high capacity, routing data through existing networks, and many related issues. In this thesis, we focus chiefly on designing fault-tolerant networks. Two vertices u,v in a network are said to be k-edge-connected if deleting any set of k − 1 edges leaves u and v connected; similarly, they are k-vertex connected if deleting any set of k − 1 other vertices or edges leaves u and v connected. We focus on building networks that are highly connected, meaning that even if a small number of edges and nodes fail, the remaining nodes will still be able to communicate. A brief description of some of our results is given below. We study the problem of building 2-vertex-connected networks that are large and have low cost. Given an n-node graph with costs on its edges and any integer k, we give an O(log n log k) approximation for the problem of finding a minimum-cost 2-vertex-connected subgraph containing at least k nodes. We also give an algorithm of similar approximation ratio for maximizing the number of nodes in a 2-vertex-connected subgraph subject to a budget constraint on the total cost of its edges. Our algorithms are based on a pruning process that, given a 2-vertex-connected graph, finds a 2-vertex-connected subgraph of any desired size and of density comparable to the input graph, where the density of a graph is the ratio of its cost to the number of vertices it contains. This pruning algorithm is simple and efficient, and is likely to find additional applications. Recent breakthroughs on vertex-connectivity have made use of algorithms for element-connectivity problems. We develop an algorithm that, given a graph with some vertices marked as terminals, significantly simplifies the graph while preserving the pairwise element-connectivity of all terminals; in fact, the resulting graph is bipartite. We believe that our simplification/reduction algorithm will be a useful tool in many settings. We illustrate its applicability by giving algorithms to find many trees that each span a given terminal set, while being disjoint on edges and non-terminal vertices; such problems have applications in VLSI design and other areas. We also use this reduction algorithm to analyze simple algorithms for single-sink network design problems with high vertex-connectivity requirements; we give an O(k log n)-approximation for the problem of k-connecting a given set of terminals to a common sink. We study similar problems in which different types of links, of varying capacities and costs, can be used to connect nodes; assuming there are economies of scale, we give algorithms to construct low-cost networks with sufficient capacity or bandwidth to simultaneously support flow from each terminal to the common sink along many vertex-disjoint paths. We further investigate capacitated network design, where edges may have arbitrary costs and capacities. Given a connectivity requirement R_uv for each pair of vertices u,v, the goal is to find a low-cost network which, for each uv, can support a flow of R_uv units of traffic between u and v. We study several special cases of this problem, giving both algorithmic and hardness results. In addition to Network Design, we consider certain Traveling Salesperson-like problems, where the goal is to find short walks that visit many distinct vertices. We give a (2 + epsilon)-approximation for Orienteering in undirected graphs, achieving the best known approximation ratio, and the first approximation algorithm for Orienteering in directed graphs. We also give improved algorithms for Orienteering with time windows, in which vertices must be visited between specified release times and deadlines, and other related problems. These problems are motivated by applications in the fields of vehicle routing, delivery and transportation of goods, and robot path planning.

Children's health and indoor air quality in primary schools and homes in Portugal-Study design

The main aim of the research project "On the Contribution of Schools to Children's Overall Indoor Air Exposure" is to study associations between adverse health effects, namely, allergy, asthma, and respiratory symptoms, and indoor air pollutants to which children are exposed to in primary schools and homes. Specifically, this investigation reports on the design of the study and methods used for data collection within the research project and discusses factors that need to be considered when designing such a study. Further, preliminary findings concerning descriptors of selected characteristics in schools and homes, the study population, and clinical examination are presented. The research project was designed in two phases. In the first phase, 20 public primary schools were selected and a detailed inspection and indoor air quality (IAQ) measurements including volatile organic compounds (VOC), aldehydes, particulate matter (PM2.5, PM10), carbon dioxide (CO2), carbon monoxide (CO), bacteria, fungi, temperature, and relative humidity were conducted. A questionnaire survey of 1600 children of ages 8-9 years was undertaken and a lung function test, exhaled nitric oxide (eNO), and tear film stability testing were performed. The questionnaire focused on children's health and on the environment in their school and homes. One thousand and ninety-nine questionnaires were returned. In the second phase, a subsample of 68 children was enrolled for further studies, including a walk-through inspection and checklist and an extensive set of IAQ measurements in their homes. The acquired data are relevant to assess children's environmental exposures and health status.

Conceptualisation, design and development of a primary school based child healthy weight intervention

INTRODUCTION: In common with much of the developed world, Scotland has a severe and well established problem with overweight and obesity in childhood with recent figures demonstrating that 31% of Scottish children aged 2-15 years old were overweight including obese in 2014. This problem is more pronounced in socioeconomically disadvantaged groups and in older children across all economic groups (Scottish Health Survey, 2014). Children who are overweight or obese are at increased risk of a number of adverse health outcomes in the short term and throughout their life course (Lobstein and Jackson-Leach, 2006). The Scottish Government tasked all Scottish Health Boards with developing and delivering child healthy weight interventions to clinically overweight or obese children in an attempt to address this health problem. It is therefore imperative to deliver high quality, affordable, appropriately targeted interventions which can make a sustained impact on children’s lifestyles, setting them up for life as healthy weight adults. This research aimed to inform the design, readiness for application and Health Board suitability of an effective primary school-based curricular child healthy weight intervention. METHODS: the process involved in conceptualising a child healthy weight intervention, developing the intervention, planning for implementation and subsequent evaluation was guided by the PRECEDE-PROCEED Model (Green and Kreuter, 2005) and the Intervention Mapping protocol (Lloyd et al. 2011). RESULTS: The outputs from each stage of the development process were used to formulate a child healthy weight intervention conceptual model then develop plans for delivery and evaluation. DISCUSSION: The Fit for School conceptual model developed through this process has the potential to theoretically modify energy balance related behaviours associated with unhealthy weight gain in childhood. It also has the potential to be delivered at a Health Board scale within current organisational restrictions.

Design de comunicação

Dissertação de Doutoramento para obtenção do grau de Doutor em Design, dissertação apresentada na Universidade de Lisboa - Faculdade de Arquitetura.

DESIGN OF EFFICIENT IN-NETWORK DATA PROCESSING AND DISSEMINATION FOR VANETS

By providing vehicle-to-vehicle and vehicle-to-infrastructure wireless communications, vehicular ad hoc networks (VANETs), also known as the “networks on wheels”, can greatly enhance traffic safety, traffic efficiency and driving experience for intelligent transportation system (ITS). However, the unique features of VANETs, such as high mobility and uneven distribution of vehicular nodes, impose critical challenges of high efficiency and reliability for the implementation of VANETs. This dissertation is motivated by the great application potentials of VANETs in the design of efficient in-network data processing and dissemination. Considering the significance of message aggregation, data dissemination and data collection, this dissertation research targets at enhancing the traffic safety and traffic efficiency, as well as developing novel commercial applications, based on VANETs, following four aspects: 1) accurate and efficient message aggregation to detect on-road safety relevant events, 2) reliable data dissemination to reliably notify remote vehicles, 3) efficient and reliable spatial data collection from vehicular sensors, and 4) novel promising applications to exploit the commercial potentials of VANETs. Specifically, to enable cooperative detection of safety relevant events on the roads, the structure-less message aggregation (SLMA) scheme is proposed to improve communication efficiency and message accuracy. The scheme of relative position based message dissemination (RPB-MD) is proposed to reliably and efficiently disseminate messages to all intended vehicles in the zone-of-relevance in varying traffic density. Due to numerous vehicular sensor data available based on VANETs, the scheme of compressive sampling based data collection (CS-DC) is proposed to efficiently collect the spatial relevance data in a large scale, especially in the dense traffic. In addition, with novel and efficient solutions proposed for the application specific issues of data dissemination and data collection, several appealing value-added applications for VANETs are developed to exploit the commercial potentials of VANETs, namely general purpose automatic survey (GPAS), VANET-based ambient ad dissemination (VAAD) and VANET based vehicle performance monitoring and analysis (VehicleView). Thus, by improving the efficiency and reliability in in-network data processing and dissemination, including message aggregation, data dissemination and data collection, together with the development of novel promising applications, this dissertation will help push VANETs further to the stage of massive deployment.

Survey of quantitative antimicrobial consumption per production stage in farrow-to-finish pig farms in Spain

Objectives: To characterise antimicrobial use (AMU) per production stage in terms of drugs, routes of application, indications, duration and exposed animals in farrow-to-finish pig farms in Spain. Design: Survey using a questionnaire on AMU during the six months prior to the interview, administered in face-to-face interviews completed from April to October 2010. Participants: 108 potentially eligible farms covering all the country were selected using a multistage sampling methodology; of these, 33 were excluded because they did not fulfil the participation criteria and 49 were surveyed. Results: The rank of the most used antimicrobials per farm and production stage and administration route started with polymyxins (colistin) by feed during the growing and the preweaning phases, followed by β-lactams by feed during the growing and the preweaning phases and by injection during the preweaning phase. Conclusions: The study demonstrates that the growing stage (from weaning to the start of finishing) has the highest AMU according to different quantitative indicators (number of records, number of antimicrobials used, percentage of farms reporting use, relative number of exposed animals per farm and duration of exposure); feed is the administration route that produces the highest antimicrobial exposure based on the higher number of exposed animals and the longer duration of treatment; and there are large differences in AMU among individual pig farms.

Factors facilitating a national quality registry to aid clinical quality improvement : findings of a national survey

Objectives: While national quality registries (NQRs) are suggested to provide opportunities for systematic follow-up and learning opportunities, and thus clinical improvements, features in registries and contexts triggering such processes are not fully known. This study focuses on one of the world's largest stroke registries, the Swedish NQR Riksstroke, investigating what aspects of the registry and healthcare organisations facilitate or hinder the use of registry data in clinical quality improvement. Methods: Following particular qualitative studies, we performed a quantitative survey in an exploratory sequential design. The survey, including 50 items on context, processes and the registry, was sent to managers, physicians and nurses engaged in Riksstroke in all 72 Swedish stroke units. Altogether, 242 individuals were presented with the survey; 163 responded, representing all but two units. Data were analysed descriptively and through multiple linear regression. Results: A majority (88%) considered Riksstroke data to facilitate detection of stroke care improvement needs and acknowledged that their data motivated quality improvements (78%). The use of Riksstroke for quality improvement initiatives was associated (R2=0.76) with ‘Colleagues’ call for local results’ (p=<0.001), ‘Management Request of Registry data’ (p=<0.001), and it was said to be ‘Simple to explain the results to colleagues’ (p=0.02). Using stepwise regression, ‘Colleagues’ call for local results’ was identified as the most influential factor. Yet, while 73% reported that managers request registry data, only 39% reported that their colleagues call for the unit's Riksstroke results. Conclusions: While an NQR like Riksstroke demonstrates improvement needs and motivates stakeholders to make progress, local stroke care staff and managers need to engage to keep the momentum going in terms of applying registry data when planning, performing and evaluating quality initiatives.

Iowa Seat Belt Use Survey 2013 Data Collection Methodology Report, September 26, 2013

In an effort to achieve greater consistency and comparability in state-wide seat belt use reporting, the National Highway Traffic Safety Administration (NHTSA) issued new requirements in 2011 for observing and reporting future seat belt use. The requirements included the involvement of a qualified statistician in the sampling and weighting portions of the process as well as a variety of operational details. The Iowa Governor’s Traffic Safety Bureau contracted with Iowa State University’s Survey & Behavioral Research Services (SBRS) in 2011 to develop the study design and data collection plan for the State of Iowa annual survey that would meet the new requirements of the NHTSA. A seat belt survey plan for Iowa was developed by SBRS with statistical expertise provided by Zhengyuan Zhu, Ph.D., Associate Professor of Statistics at Iowa State University and was approved by NHTSA on March 19, 2012.

Iowa Seat Belt Use Survey 2014 Data Collection Methodology Report, September 25, 2014

In an effort to achieve greater consistency and comparability in state-wide seat belt use reporting, the National Highway Traffic Safety Administration (NHTSA) issued new requirements in 2011 for observing and reporting future seat belt use. The requirements included the involvement of a qualified statistician in the sampling and weighting portions of the process as well as a variety of operational details. The Iowa Governor’s Traffic Safety Bureau contracted with Iowa State University’s Survey & Behavioral Research Services (SBRS) in 2011 to develop the study design and data collection plan for the State of Iowa annual survey that would meet the new requirements of the NHTSA. A seat belt survey plan for Iowa was developed by SBRS with statistical expertise provided by Zhengyuan Zhu, Ph.D., Associate Professor of Statistics at Iowa State University and was approved by NHTSA on March 19, 2012.