Estudi de la relació estructura-funció de les proteïnes CPT1

En aquest treball s’ha analitzat la relació estructura-funció dels enzims CPT1, o Carnitina palmitoïltransferasa 1, que catalitza la reacció de transesterificació dels àcids grassos de cadena llarga a acil-carnitines, per tal que puguin accedir a la matriu mitocondrial i ser oxidats. Aquest enzim es troba estrictament regulat per malonil-CoA, primer intermediari de la síntesi d’àcids grassos, establint-se així una regulació coordinada entre la formació i la degradació de grasses. S’han estudiat els tres isotips de CPT1 descrits fins al moment: CPT1A, CPT1B i CPT1C. Mitjançant l’expressió heteròloga de mutants de CPT1A de rata i CPT1B de porc en el llevat P. pastoris, s’ha estudiat l’efecte sobre la inhibició per malonil-CoA de petits canvis en la seva estructura, per tal de trobar una relació entre la seva funció enzimàtica i la disposició conformacional de la proteïna. Segons els resultats obtinguts, el residu Glu590 de CPT1A de rata estaria impedint la unió de l’inhibidor, mentre que el residu Met593 estaria afavorint aquesta unió. Els estudis amb l’enzim CPT1B de porc demostraren l’existència d’un determinant positiu per la sensibilitat al malonil-CoA en els primers 18 residus de la proteïna, i definiren la posició Glu17 com la responsable de l’alta afinitat a la carnitina i la baixa sensibilitat a la inhibició per malonil-CoA (8). Es clonà i caracteritzà la regió promotora del gen de CPT1C humana, amb la intenció d’analitzar la funcionalitat de putatius elements de resposta identificats in silico. Cap dels elements estudiats resultà ser funcional in vivo. A més, es demostrà que la manca d’activitat catalítica de la proteïna no és deguda a l’extensió C-terminal que presenta respecte els isotips A i B, tot i presentar un alt percentatge d’identitat de seqüència. S’ha amplificat una isoforma humana de CPT1C (Pubmed Acc. Num. AK299866), corresponent a la regió carboxiterminal de la proteïna, que es pretén utilitzar per obtenir el primer cristall de la part soluble d’una proteïna CPT1.     

Characterization of SKI-1/S1P-mediated processing of Arenavirus glycoprotein precursors

Arenaviruses are rodent-born world-wide distributed negative strand RNA viruses that comprise a number of important human pathogens including Lassa virus (LASV) which causes more than 3 00'000 infections annually in Western Africa. Lymphocytic choriomeningitis virus (LCMV) is the prototypic member of the arenavirus family, which is divided in two major subgroups according to serological properties and geographical distribution, the Old World and New World arenaviruses. The envelope glycoprotein precursors (GPCs) of arenaviruses have to undergo proteolytic processing to acquire biological function and to be incorporated into progeny virions. A cellular enzyme is responsible for this processing: the Subtilisin Kexin Isozyme-1 or Site-1 protease (SKI- 1/S1P). In this thesis we have studied the relationship between SKI-1/S1P and the envelope GPs of arenaviruses. In a first project, we investigated the molecular interactions between SKI-1/SIP and arenavirus GPCs. Using SKI-1/SIP mutants, we confirmed previously published observations locating LCMV GPC and LASV GPC processing in the Late Golgi/TGN and ER/cis-Golgi, respectively. A single mutation in the cleavage site of LCMV was sufficient to re-locate SKI- 1/SIP-mediated processing from the late Golgi/TGN to the ER/cis-Golgi. We then demonstrated that the transmembrane domain, the C-terminal tail and the phosphorylation sites of SKI-1/S1P are dispensable for GPC processing. Additionally we identified a SKI- 1/S1P mutant defective for autoprocessing at site Β, B' that was selectively impaired in processing of viral GPCs but not cellular substrates. We also showed that a soluble variant of SKI-1/SIΡ was unable to cleave envelope GPs at the cell surface when added in the culture medium. This study highlighted a new target for small molecule inhibitors that would specifically impair GPC but not cellular substrate processing. In a second project, we identified and characterized two residues: LASV GPC Y253 and SKI-1/S1P Y285 that are important for the SKI-1/SIP-mediated LASV GPC cleavage. An alignment of GPC sequences revealed a conserved aromatic residue in P7 position in the GPCs of Old World and Clade C of New World arenaviruses. Mutations in GPC at position P7 impaired processing efficiency. In SKI-1/S1P, mutating Y285 into A negatively affected processing of substrates containing aromatic residues in P7, without affecting others. This property could be used to develop specific drugs targeting SKI-1/SIP-mediated cleavage of LASV GPC without affecting cellular substrates. As a third project we studied the role of the SKI-1/SIP-mediated processing and the unusual stable signal peptide (SSP) for the folding and secretion of soluble forms of the ectodomain of LASV and LCMV glycoproteins. We provide evidence that the transmembrane domain and the cytosolic tail are crucial for the stability of the prefusion conformation of arenavirus GP and that the SSP is required for transport and processing of full-length GP, but not the soluble ectodomain per se. Taken together, these results will lead to a better understanding of the complex interactions between arenavirus GPCs and SKI-1/S IP, paving the avenue for the development of novel anti-arenaviral therapeutics. - Les Arenavirus sont des virus à ARN négatif distribués mondialement et portés par les rongeurs. Cette famille de virus comprend des virus hautement pathogènes pour l'homme comme le virus de Lassa (LASV) qui cause plus de 300Ό00 infections par année en Afrique de l'Ouest. Le virus de la chorioméningite lymphocytaire (LCMV) est le représentant de cette famille qui est divisée en deux sous-groupes selon des critères sérologiques et de distributions géographiques: arenavirus du Nouveau et de l'Ancien monde. Les glycoprotéines d'enveloppe de ces virus (GPCs) doivent être clivées pour être incorporées dans le virus et ainsi lui permettre d'être infectieux. Une enzyme cellulaire est responsable de ce clivage : la Subtilisin Kexin Isozyme-1 ou protéase Site-1 (SKI-l/SlP). Dans cette thèse, nous avons étudié la relation entre cette enzyme cellulaire et les GPs des arenavirus. Dans un premier temps, nous avons étudié les interactions moléculaires entre SKI- 1/S1P et GPC. A l'aide de mutants de SKI-l/SlP, nous avons confirmé des résultats précédemment publiés montrant que les glycoprotéines d'enveloppe de LASV sont clivés dans le réticulum endoplasmique/cis-Golgi alors que celles de LCMV sont clivées dans le Golgi tardif/TGN. Une seule mutation dans le site de clivage de la glycoprotéine de LCMV est suffisante pour changer le compartiment cellulaire dans lequel est clivée cette glycoprotéine. Ensuite, nous avons démontré que le domaine transmembranaire, la partie cytosolique C-terminale ainsi que les sites de phosphorylations de cette enzyme ne sont pas indispensables pour permettre le clivage de GPC. De plus, nous avons identifié un mutant de SKI-l/SlP dans lequel Γ autoprocessing au site B,B' est impossible, incapable de cliver GPC mais toujours pleinement fonctionnelle envers ses substrats cellulaires. Nous avons également démontré qu'une forme soluble de SKI-l/SlP ajoutée dans le milieu de culture n'est pas capable de couper GPC à la surface de la cellule. Cette étude a défini une nouvelle cible potentielle pour un médicament qui inhiberait le clivage des glycoprotéines des arenavirus sans affecter les processus normaux de la cellule. Dans un second project, nous avons identifié deux acides aminés, LASV GPC Y253 et SKI-l/SlP Y285, qui sont important pour le clivage de LASV GPC. Un alignement des séquences de clivage des GPCs a montré qu'un résidu aromatique est conservé en position P7 du site de clivage chez tous les arenavirus de l'Ancien monde et dans le clade C des arenavirus du Nouveau monde. Une mutation de cet acide aminée dans GPC réduit l'efficacité de clivage par SKI-l/SlP. Mutation de la tyrosine 285 de SKI-l/SlP en alanine affecte négativement le clivage des substrats contenant un résidu aromatique en position P7 sans affecter les autres. Cette propriété pourrait être utilisée pour le développement de médicaments spécifiques ciblant le clivage de GPC. Finalement, nous avons étudié le rôle du processing accomplit par SKI-l/SlP et du signal peptide pour le pliage et la sécrétion de formes solubles des glycoprotéines de LASV et LCMV. Nous avons montré que le domaine transmembranaire et la partie cytosolique de GP sont crucials pour la stabilité de la conformation pre-fusionnelle des GPs et que SSP est nécessaire pour le transport et le processing de GP, mais pas de son ecto-domaine soluble. En conclusion, les résultats obtenus durant cette thèse permettrons de mieux comprendre les interactions complexes entre SKI-l/SlP et les glycoprotéines des arenavirus, ouvrant le chemin pour le développement de nouveaux médicaments anti-arénaviraux.

Droits du patient: ce que le nouveau Code civil va modifier dans les soins aux enfants [Patients' rights: what the new swiss civil code will change in the health care of children].

Recent progress in medicine allow to provide treatment, to cure or to extend the lifespan of people that would have not survived before. Doctors and healthcare providers have become indispensable actors in Western societies. This is particularly true for children's health issues. With the new information technologies, knowledge is now available to everyone, which enables patients to dialog on an equal footing with the physician. Nowadays, therapeutic choices are discussed and negotiated. The new tensions caused by this relationship between therapist and patient have created the need for new regulations. The Swiss Confederation has modified its Civil Code with the objective of a better protection of vulnerable individuals. This article summarizes the consequences of the new regulations with regard to the care and treatment provided to children.

Probabilistic evidential assessment of gunshot residue particle evidence (Part II) : Bayesian parameter estimation for experimental count data.

Part I of this series of articles focused on the construction of graphical probabilistic inference procedures, at various levels of detail, for assessing the evidential value of gunshot residue (GSR) particle evidence. The proposed models - in the form of Bayesian networks - address the issues of background presence of GSR particles, analytical performance (i.e., the efficiency of evidence searching and analysis procedures) and contamination. The use and practical implementation of Bayesian networks for case pre-assessment is also discussed. This paper, Part II, concentrates on Bayesian parameter estimation. This topic complements Part I in that it offers means for producing estimates useable for the numerical specification of the proposed probabilistic graphical models. Bayesian estimation procedures are given a primary focus of attention because they allow the scientist to combine (his/her) prior knowledge about the problem of interest with newly acquired experimental data. The present paper also considers further topics such as the sensitivity of the likelihood ratio due to uncertainty in parameters and the study of likelihood ratio values obtained for members of particular populations (e.g., individuals with or without exposure to GSR).

Steel Diaphragms in Prestressed Concrete Girder Bridges, September 2004

Over the years, bridge engineers have been concerned about the response of prestressed concrete (PC) girder bridges that had been hit by over-height vehicles or vehicle loads. When a bridge is struck by an over-height vehicle or vehicle load, usually the outside and in some instances one of the interior girders are damaged in a bridge. The effect of intermediate diaphragms in providing damage protection to the PC girders of a bridge is not clearly defined. This analytical study focused on the role of intermediate diaphragms in reducing the occurrence of damage in the girders of a PC-girder bridge that has been struck by an over-height vehicle or vehicle load. The study also investigated whether a steel, intermediate diaphragm would essentially provide the same degree of impact protection for PC girders as that provided by a reinforced-concrete diaphragm. This investigation includes the following: a literature search and a survey questionnaire to determine the state-of-the-art in the use and design of intermediate diaphragms in PC-girder bridges. Comparisons were made between the strain and displacement results that were experimentally measured for a large-scale, laboratory, model bridge during previously documented work and those results that were obtained from analyses of the finite-element models that were developed during this research for that bridge. These comparisons were conducted to calibrate the finite element models used in the analyses for this research on intermediate diaphragms. Finite-element models were developed for non-skewed and skewed PC-girder bridges. Each model was analyzed with either a reinforced concrete or two types of steel, intermediate diaphragms that were located at mid-span of an interior span for a PC-girder bridge. The bridge models were analyzed for lateral-impact loads that were applied to the bottom flange of the exterior girders at the diaphragms location and away from the diaphragms location. A comparison was conducted between the strains and displacements induced in the girders for each intermediate-diaphragm type. These results showed that intermediate diaphragms have an effect in reducing impact damage to the PC girders. When the lateral impact-load was applied at the diaphragm location, the reinforced-concrete diaphragms provided more protection for the girders than that provided by the two types of steel diaphragms. The three types of diaphragms provided essentially the same degree of protection to the impacted, PC girder when the lateral-impact load was applied away from the diaphragm location.

Practical considerations for conducting ecotoxicity test methods with manufactured nanomaterials: what have we learnt so far?

This review paper reports the consensus of a technical workshop hosted by the European network, NanoImpactNet (NIN). The workshop aimed to review the collective experience of working at the bench with manufactured nanomaterials (MNMs), and to recommend modifications to existing experimental methods and OECD protocols. Current procedures for cleaning glassware are appropriate for most MNMs, although interference with electrodes may occur. Maintaining exposure is more difficult with MNMs compared to conventional chemicals. A metal salt control is recommended for experiments with metallic MNMs that may release free metal ions. Dispersing agents should be avoided, but if they must be used, then natural or synthetic dispersing agents are possible, and dispersion controls essential. Time constraints and technology gaps indicate that full characterisation of test media during ecotoxicity tests is currently not practical. Details of electron microscopy, dark-field microscopy, a range of spectroscopic methods (EDX, XRD, XANES, EXAFS), light scattering techniques (DLS, SLS) and chromatography are discussed. The development of user-friendly software to predict particle behaviour in test media according to DLVO theory is in progress, and simple optical methods are available to estimate the settling behaviour of suspensions during experiments. However, for soil matrices such simple approaches may not be applicable. Alternatively, a Critical Body Residue approach may be taken in which body concentrations in organisms are related to effects, and toxicity thresholds derived. For microbial assays, the cell wall is a formidable barrier to MNMs and end points that rely on the test substance penetrating the cell may be insensitive. Instead assays based on the cell envelope should be developed for MNMs. In algal growth tests, the abiotic factors that promote particle aggregation in the media (e.g. ionic strength) are also important in providing nutrients, and manipulation of the media to control the dispersion may also inhibit growth. Controls to quantify shading effects, and precise details of lighting regimes, shaking or mixing should be reported in algal tests. Photosynthesis may be more sensitive than traditional growth end points for algae and plants. Tests with invertebrates should consider non-chemical toxicity from particle adherence to the organisms. The use of semi-static exposure methods with fish can reduce the logistical issues of waste water disposal and facilitate aspects of animal husbandry relevant to MMNs. There are concerns that the existing bioaccumulation tests are conceptually flawed for MNMs and that new test(s) are required. In vitro testing strategies, as exemplified by genotoxicity assays, can be modified for MNMs, but the risk of false negatives in some assays is highlighted. In conclusion, most protocols will require some modifications and recommendations are made to aid the researcher at the bench. [Authors]

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition. ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Comparative analysis of cancer genes in the human and chimpanzee genomes

Background: Cancer is a major medical problem in modern societies. However, the incidence of this disease in non-human primates is very low. To study whether genetic differences between human and chimpanzee could contribute to their distinct cancer susceptibility, we have examined in the chimpanzee genome the orthologous genes of a set of 333 human cancer genes. Results: This analysis has revealed that all examined human cancer genes are present in chimpanzee, contain intact open reading frames and show a high degree of conservation between both species. However, detailed analysis of this set of genes has shown some differences in genes of special relevance for human cancer. Thus, the chimpanzee gene encoding p53 contains a Pro residue at codon 72, while this codon is polymorphic in humans and can code for Arg or Pro, generating isoforms with different ability to induce apoptosis or interact with p73. Moreover, sequencing of the BRCA1 gene has shown an 8 Kb deletion in the chimpanzee sequence that prematurely truncates the co-regulated NBR2 gene. Conclusion: These data suggest that small differences in cancer genes, as those found in tumor suppressor genes, might influence the differences in cancer susceptibility between human and chimpanzee. Nevertheless, further analysis will be required to determine the exact contribution of the genetic changes identified in this study to the different cancer incidence in non-human primates.

Dowel Bar Optimization: Phases I and II, October 2001

America’s roadways are in serious need of repair. According to the American Society of Civil Engineers (ASCE), one-third of the nation’s roads are in poor or mediocre condition (1). ASCE has estimated that under these circumstances American drivers will sacrifice $5.8 billion and as many as 13,800 fatalities a year from 1999 to 2001 ( 1). A large factor in the deterioration of these roads is a result of how well the steel reinforcement transfers loads across the concrete slabs. Fabricating this reinforcement using a shape conducive to transferring these loads will help to aid in minimizing roadway damage. Load transfer within a series of concrete slabs takes place across the joints. For a typical concrete paved road, these joints are approximately 1/8-inch gaps between two adjacent slabs. Dowel bars are located at these joints and used to transfer load from one slab to its adjacent slabs. As long as the dowel bar is completely surrounded by concrete no problems will occur. However, when the hole starts to oblong a void space is created and difficulties can arise. This void space is formed due to a stress concentration where the dowel contacts the concrete. Over time, the repeated process of traffic traveling over the joint crushes the concrete surrounding the dowel bar and causes a void in the concrete. This void inhibits the dowel’s ability to effectively transfer load across the joint. Furthermore, this void gives water and other particles a place to collect that will eventually corrode and potentially bind or lock the joint so that no thermal expansion is allowed. Once there is no longer load transferred across the joint, the load is transferred to the foundation and differential settlement of the adjacent slabs will occur.

Evaluation of a Bridge Constructed using High Performance Steel, May 2006

Of the approximately 25,000 bridges in Iowa, 28% are classified as structurally deficient, functionally obsolete, or both. Because many Iowa bridges require repair or replacement with a relatively limited funding base, there is a need to develop new bridge materials that may lead to longer life spans and reduced life-cycle costs. In addition, new and effective methods for determining the condition of structures are needed to identify when the useful life has expired or other maintenance is needed. Due to its unique alloy blend, high-performance steel (HPS) has been shown to have improved weldability, weathering capabilities, and fracture toughness than conventional structural steels. Since the development of HPS in the mid-1990s, numerous bridges using HPS girders have been constructed, and many have been economically built. The East 12th Street Bridge, which replaced a deteriorated box girder bridge, is Iowa’s first bridge constructed using HPS girders. The new structure is a two-span bridge that crosses I-235 in Des Moines, Iowa, providing one lane of traffic in each direction. A remote, continuous, fiber-optic based structural health monitoring (SHM) system for the bridge was developed using off-the-shelf technologies. In the system, sensors strategically located on the bridge collect raw strain data and then transfer the data via wireless communication to a gateway system at a nearby secure facility. The data are integrated and converted to text files before being uploaded automatically to a website that provides live strain data and a live video stream. A data storage/processing system at the Bridge Engineering Center in Ames, Iowa, permanently stores and processes the data files. Several processes are performed to check the overall system’s operation, eliminate temperature effects from the complete strain record, compute the global behavior of the bridge, and count strain cycles at the various sensor locations.