Rapid genome wide mapping of phosphine resistance loci by a simple regional averaging analysis in the red flour beetle, Tribolium castaneum

Background Next-generation sequencing technology is an important tool for the rapid, genome-wide identification of genetic variations. However, it is difficult to resolve the ‘signal’ of variations of interest and the ‘noise’ of stochastic sequencing and bioinformatic errors in the large datasets that are generated. We report a simple approach to identify regional linkage to a trait that requires only two pools of DNA to be sequenced from progeny of a defined genetic cross (i.e. bulk segregant analysis) at low coverage (<10×) and without parentage assignment of individual SNPs. The analysis relies on regional averaging of pooled SNP frequencies to rapidly scan polymorphisms across the genome for differential regional homozygosity, which is then displayed graphically. Results Progeny from defined genetic crosses of Tribolium castaneum (F4 and F19) segregating for the phosphine resistance trait were exposed to phosphine to select for the resistance trait while the remainders were left unexposed. Next generation sequencing was then carried out on the genomic DNA from each pool of selected and unselected insects from each generation. The reads were mapped against the annotated T. castaneum genome from NCBI (v3.0) and analysed for SNP variations. Since it is difficult to accurately call individual SNP frequencies when the depth of sequence coverage is low, variant frequencies were averaged across larger regions. Results from regional SNP frequency averaging identified two loci, tc_rph1 on chromosome 8 and tc_rph2 on chromosome 9, which together are responsible for high level resistance. Identification of the two loci was possible with only 5-7× average coverage of the genome per dataset. These loci were subsequently confirmed by direct SNP marker analysis and fine-scale mapping. Individually, homozygosity of tc_rph1 or tc_rph2 results in only weak resistance to phosphine (estimated at up to 1.5-2.5× and 3-5× respectively), whereas in combination they interact synergistically to provide a high-level resistance >200×. The tc_rph2 resistance allele resulted in a significant fitness cost relative to the wild type allele in unselected beetles over eighteen generations. Conclusion We have validated the technique of linkage mapping by low-coverage sequencing of progeny from a simple genetic cross. The approach relied on regional averaging of SNP frequencies and was used to successfully identify candidate gene loci for phosphine resistance in T. castaneum. This is a relatively simple and rapid approach to identifying genomic regions associated with traits in defined genetic crosses that does not require any specialised statistical analysis.

Effect of Broadcast Baiting on Abundance Patterns of Red Imported Fire Ants (Hymenoptera: Formicidae) and Key Local Ant Genera at Long-Term Monitoring Sites in Brisbane, Australia

In 2001, the red imported fire ant (Solenopsis invicta Buren) was identified in Brisbane, Australia. An eradication program involving broadcast bait treatment with two insect growth regulators and a metabolic inhibitor began in September of that year and is currently ongoing. To gauge the impacts of these treatments on local ant populations, we examined long-term monitoring data and quantified abundance patterns of S. invicta and common local ant genera using a linear mixed-effects model. For S. invicta, presence in pitfalls reduced over time to zero on every site. Significantly higher numbers of S. invicta workers were collected on high-density polygyne sites, which took longer to disinfest compared with monogyne and low-density polygyne sites. For local ants, nine genus groups of the 10 most common genera analyzed either increased in abundance or showed no significant trend. Five of these genus groups were significantly less abundant at the start of monitoring on high-density polygyne sites compared with monogyne and low-density polygyne sites. The genus Pheidole significantly reduced in abundance over time, suggesting that it was affected by treatment efforts. These results demonstrate that the treatment regime used at the time successfully removed S. invicta from these sites in Brisbane, and that most local ant genera were not seriously impacted by the treatment. These results have important implications for current and future prophylactic treatment efforts, and suggest that native ants remain in treated areas to provide some biological resistance to S. invicta.

Fish Silage as Replacement of Fishmeal in Red Tilapia Feeds

We estimated the effect on growth and nutrient efficiency of replacing fishmeal with silage incorporated with rice bran in diets for fingerling red tilapia (Oreochromis mossambicus × Oreochromis niloticus × Oreochromis aureus) over 12 weeks. Isonitrogenous (300 g kg−1 protein dry matter basis) and isoenergetic (4450 Kcal gross energy kg−1) feed formulations with increasing levels of tilapia silage as a replacement for fishmeal were prepared: Diet 1 with no silage (0 g Kg−1), Diet 2 (250 g Kg−1), Diet 3 (500 g Kg−1), and Diet 4 (750 g Kg−1). Feed intake was similar among Diets 1, 2, and 3, while Diet 4 had a significantly lower intake. There was no significant difference (P > 0.05) in weight gain or specific growth rate (SGR), feed conversion ratio (FCR), and protein efficiency ratio (PER), among fish fed Diets 1, 2, and 3. Fish fed with Diet 4 had significantly lower weight gain; SGR and PER and significantly higher FCR. Organoleptic properties of the fish were not affected by the diets. The results of this study indicate that less expensive dried fish silage with rice bran is an alternative protein source for tilapia feed up to 50% of fishmeal replacement.

Eradication of two incursions of the Red Imported Fire Ant in Queensland, Australia

Of the five known incursions of the highly invasive Red Imported Fire Ant in Australia, two are regarded to have been eradicated. As treatment efforts continue, and the programme evolves and new tools become available, eradication is still considered to be feasible for the remaining Red Imported Fire Ant populations with long-term commitment and support.

Susceptibility to sulfuryl fluoride and lack of cross-resistance to phosphine in developmental stages of the red flour beetle, Tribolium castaneum (Coleoptera: Tenebrionidae)

BACKGROUND Our aim was to ascertain the potential of sulfuryl fluoride (SF) as an alternative fumigant to manage phosphine-resistant pests. We tested the susceptibility of all life stages of red flour beetle, Tribolium castaneum (Herbst), to SF and assessed the presence of cross-resistance to this fumigant in phosphine-resistant strains of this species. RESULTS Analysis of dose–response data indicated that the egg was the stage most tolerant to SF under a 48 h exposure period. At LC50, eggs were 29 times more tolerant than other immature stages and adults, and required a relatively high concentration of 48.2 mg L−1 for complete mortality. No significant differences in tolerance to SF were observed among the three larval instars, pupae and adults, and all of these stages were controlled at a low concentration of 1.32 mg L−1. Phosphine-resistant strains did not show cross-resistance to SF. CONCLUSION Our research concluded that the current maximum registered rate of SF, 1500 gh m−3, is adequate to control all the post-embryonic life stages of T. castaneum over a 48 h fumigation period, but it will fail to achieve complete mortality of eggs, indicating the risk of some survival of eggs under this short exposure period. As there is no cross-resistance to SF in phosphine-resistant insects, it will play a key role in managing phosphine resistance in stored-grain insect pests. © 2014 Commonwealth of Australia. Pest Management Science © 2014 Society of Chemical Industry

Priority list of endemic diseases for the red meat industries

This report provides a systematic review of the most economically damaging endemic diseases and conditions for the Australian red meat industry (cattle, sheep and goats). A number of diseases for cattle, sheep and goats have been identified and were prioritised according to their prevalence, distribution, risk factors and mitigation. The economic cost of each disease as a result of production losses, preventive costs and treatment costs is estimated at the herd and flock level, then extrapolated to a national basis using herd/flock demographics from the 2010-11 Agricultural Census by the Australian Bureau of Statistics. Information shortfalls and recommendations for further research are also specified. A total of 17 cattle, 23 sheep and nine goat diseases were prioritised based on feedback received from producer, government and industry surveys, followed by discussions between the consultants and MLA. Assumptions of disease distribution, in-herd/flock prevalence, impacts on mortality/production and costs for prevention and treatment were obtained from the literature where available. Where these data were not available, the consultants used their own expertise to estimate the relevant measures for each disease. Levels of confidence in the assumptions for each disease were estimated, and gaps in knowledge identified. The assumptions were analysed using a specialised Excel model that estimated the per animal, herd/flock and national costs of each important disease. The report was peer reviewed and workshopped by the consultants and experts selected by MLA before being finalised. Consequently, this report is an important resource that will guide and prioritise future research, development and extension activities by a variety of stakeholders in the red meat industry. This report completes Phase I and Phase II of an overall four-Phase project initiative by MLA, with identified data gaps in this report potentially being addressed within the later phases. Modelling the economic costs using a consistent approach for each disease ensures that the derived estimates are transparent and can be refined if improved data on prevalence becomes available. This means that the report will be an enduring resource for developing policies and strategies for the management of endemic diseases within the Australian red meat industry.

What are the driving factors influencing the size distribution of airborne synthetic clay particles emitted from a jet milling process?

In the field of workplace air quality, measuring and analyzing the size distribution of airborne particles to identify their sources and apportion their contribution has become widely accepted, however, the driving factors that influence this parameter, particularly for nanoparticles (< 100 nm), have not been thoroughly determined. Identification of driving factors, and in turn, general trends in size distribution of emitted particles would facilitate the prediction of nanoparticles’ emission behavior and significantly contribute to their exposure assessment. In this study, a comprehensive analysis of the particle number size distribution data, with a particular focus on the ultrafine size range of synthetic clay particles emitted from a jet milling machine was conducted using the multi-lognormal fitting method. The results showed relatively high contribution of nanoparticles to the emissions in many of the tested cases, and also, that both surface treatment and feed rate of the machine are significant factors influencing the size distribution of the emitted particles of this size. In particular, applying surface treatments and increasing the machine feed rate have the similar effect of reducing the size of the particles, however, no general trend was found in variations of size distribution across different surface treatments and feed rates. The findings of our study demonstrate that for this process and other activities, where no general trend is found in the size distribution of the emitted airborne particles due to dissimilar effects of the driving factors, each case must be treated separately in terms of workplace exposure assessment and regulations.

The life cycle and genetic structure of the red alga Furcellaria lumbricalis on a salinity gradient

The life cycle and genetic diversity of the red alga Furcellaria lumbricalis (Hudson) Lamouroux were investigated in 15 populations in northern Europe. The occurrence of different life cycle phases and seasonality of reproduction were studied in four brackish populations in the northern Baltic Sea. Furthermore, a new method, based on genome screening with ISSR markers combined with a restriction-ligation method, was developed to discover microsatellite markers for population genetic analyses. The mitochondrial DNA cox2-3 spacer sequence and four microsatellite markers were used to examine the genetic diversity and differentiation of red algal populations in northern Europe. In addition, clonality and small-scale genetic structure of one Irish and four Baltic Sea populations were studied with microsatellite markers. It was discovered that at the low salinities of the northern Baltic Sea, only tetrasporophytes and males were present in the populations of F. lumbricalis and that winter was the main season for tetrasporangial production. Furthermore, the population occurring at the lowest salinity (3.6 practical salinity units, psu) did not produce spores. The size of the tetraspores was smaller in the Baltic Sea populations than that in the Irish population, and there were more deformed spores in the Baltic Sea populations than in the Irish populations. Studies with microsatellite markers indicated that clonality is a common phenomenon in the Baltic Sea populations of F. lumbricalis, although the proportion of clonal individuals varied among populations. Some genetic divergence occurred within locations both in Ireland and in the northern Baltic Sea. Even though no carpogonia were detected in the field samples during the study, the microsatellite data indicated that sexual reproduction occurs at least occasionally in the northern Baltic Sea. The genetic diversity of F. lumbricalis was highest in Brittany, France. Since no variation was discovered in the mtDNA cox2-3 spacer sequence, which is generally regarded as an informative phylogeographic marker in red algae, it can be assumed that the studied populations probably share the same origin.

Additional binding sites in lysozyme. X-ray analysis of lysozyme complexes with bromophenol red and bromophenol blue

The binding sites in hen egg-white lysozyme for neutral bromophenol red (BPR) and ionized bromophenol blue (BPB) have been characterized at 2 Å resolution. In either case, the dye-bound enzyme is active against the polysaccharide, but not against the cell wall. Both binding sites are outside, but close to, the hexasaccharide binding cleft in the enzyme. The binding site of BPR made up of Arg5, Lys33, Phe34, Asn37, Phe38, Ala122, Trp123 and possibly Arg125, is dose to subsite F while that of BPB made up of Tyr20, Arg21, Asn93, Lys96, Lys97 and Ser100, is close to subsites A and B. The binding sites of the neutral dye and the ionized dye are thus spatially far apart. The peptide component of the bacterial cell wall probably interacts with these cells during enzyme action. Such interactions are perhaps necessary for appropriately positioning the enzyme molecule on the bacterial cell wall.

Effect of soil variability on the bearing capacity of clay and in slope stability problems

Site-specific geotechnical data are always random and variable in space. In the present study, a procedure for quantifying the variability in geotechnical characterization and design parameters is discussed using the site-specific cone tip resistance data (qc) obtained from static cone penetration test (SCPT). The parameters for the spatial variability modeling of geotechnical parameters i.e. (i) existing trend function in the in situ qc data; (ii) second moment statistics i.e. analysis of mean, variance, and auto-correlation structure of the soil strength and stiffness parameters; and (iii) inputs from the spatial correlation analysis, are utilized in the numerical modeling procedures using the finite difference numerical code FLAC 5.0. The influence of consideration of spatially variable soil parameters on the reliability-based geotechnical deign is studied for the two cases i.e. (a) bearing capacity analysis of a shallow foundation resting on a clayey soil, and (b) analysis of stability and deformation pattern of a cohesive-frictional soil slope. The study highlights the procedure for conducting a site-specific study using field test data such as SCPT in geotechnical analysis and demonstrates that a few additional computations involving soil variability provide a better insight into the role of variability in designs.

A Proof of Convergence of the B-RED and P-RED Algorithms for Random Early Detection

In [8], we recently presented two computationally efficient algorithms named B-RED and P-RED for random early detection. In this letter, we present the mathematical proof of convergence of these algorithms under general conditions to local minima.

Invertebrate predation and trophic cascades in a pelagic food web : The multiple roles of Chaoborus flavicans (Meigen) in a clay-turbid lake

In lake ecosystems, both fish and invertebrate predators have dramatic effects on their prey communities. Fish predation selects large cladocerans while invertebrate predators prefer prey of smaller size. Since invertebrate predators are the preferred food items for fish, their occurrence at high densities is often connected with the absence or low number of fish. It is generally believed that invertebrate predators can play a significant role only if the density of planktivorous fish is low. However, in eutrophic clay-turbid Lake Hiidenvesi (southern Finland), a dense population of predatory Chaoborus flavicans larvae coexists with an abundant fish population. The population covers the stratifying area of the lake and attains a maximum population density of 23000 ind. m-2. This thesis aims to clarify the effects of Chaoborus flavicans on the zooplankton community and the environmental factors facilitating the coexistence of fish and invertebrate predators. In the stratifying area of Lake Hiidenvesi, the seasonal succession of cladocerans was exceptional. The spring biomass peak of cladocerans was missing and the highest biomass occurred in midsummer. In early summer, the consumption rate by chaoborids clearly exceeded the production rate of cladocerans and each year the biomass peak of cladocerans coincided with the minimum chaoborid density. In contrast, consumption by fish was very low and each study year cladocerans attained maximum biomass simultaneously with the highest consumption by smelt (Osmerus eperlanus). The results indicated that Chaoborus flavicans was the main predator of cladocerans in the stratifying area of Lake Hiidenvesi. The clay turbidity strongly contributed to the coexistence of chaoborids and smelt at high densities. Turbidity exceeding 30 NTU combined with light intensity below 0.1 μE m-2 s-1provides an efficient daytime refuge for chaoborids, but turbidity alone is not an adequate refuge unless combined with low light intensity. In the non-stratifying shallow basins of Lake Hiidenvesi, light intensity exceeds this level during summer days at the bottom of the lake, preventing Chaoborus forming a dense population in the shallow parts of the lake. Chaoborus can be successful particularly in deep, clay-turbid lakes where they can remain high in the water column close to their epilimnetic prey. Suspended clay alters the trophic interactions by weakening the link between fish and Chaoborus, which in turn strengthens the effect of Chaoborus predation on crustacean zooplankton. Since food web management largely relies on manipulations of fish stocks and the cascading effects of such actions, the validity of the method in deep clay-turbid lakes may be questioned.

Formation of linear plasmid multimers promoted by the phage lambda Red-system in lon mutants of Escherichia coli

We report here the formation of plasmid linear multimers promoted by the Red-system of phage lambda using a multicopy plasmid comprised of lambda red alpha and red beta genes, under the control of the lambda cI857 repressor. Our observations have revealed that the multimerization of plasmid DNA is dependent on the red beta and recA genes, suggesting a concerted role for these functions in the formation of plasmid multimers. The formation of multimers occurred in a recBCD+ sbcB+ xthA+ lon genetic background at a higher frequency than in the isogenic lon+ host cells. The multimers comprised tandem repeats of monomer plasmid DNA. Treatment of purified plasmid DNA with exonuclease III revealed the presence of free double-chain ends in the molecules. Determination of the size of multimeric DNA, by pulse field gel electrophoresis, revealed that the bulk of the DNA was in the range 50-240 kb, representing approximately 5-24 unit lengths of monomeric plasmid DNA. We provide a conceptual framework for Red-system-promoted formation and enhanced accumulation of plasmid linear multimers in lon mutants of E. coli.