Numerical coupling of thermal-electric network models and energy-transport equations including optoelectronic semiconductor devices

In this work the numerical coupling of thermal and electric network models with model equations for optoelectronic semiconductor devices is presented. Modified nodal analysis (MNA) is applied to model electric networks. Thermal effects are modeled by an accompanying thermal network. Semiconductor devices are modeled by the energy-transport model, that allows for thermal effects. The energy-transport model is expandend to a model for optoelectronic semiconductor devices. The temperature of the crystal lattice of the semiconductor devices is modeled by the heat flow eqaution. The corresponding heat source term is derived under thermodynamical and phenomenological considerations of energy fluxes. The energy-transport model is coupled directly into the network equations and the heat flow equation for the lattice temperature is coupled directly into the accompanying thermal network. The coupled thermal-electric network-device model results in a system of partial differential-algebraic equations (PDAE). Numerical examples are presented for the coupling of network- and one-dimensional semiconductor equations. Hybridized mixed finite elements are applied for the space discretization of the semiconductor equations. Backward difference formluas are applied for time discretization. Thus, positivity of charge carrier densities and continuity of the current density is guaranteed even for the coupled model.

Food Safety and Mineral Oil Contaminated Paperboard Packaging: an Analytical Challenge and a Migration Study

Food packaging protects food, but it can sometimes become a source of undesired contaminants. Paper based materials, despite being perceived as “natural” and safe, can contain volatile contaminants (especially if made from recycled paper) able to migrate to food, as mineral oil, phthalates and photoinitiators. Mineral oil is a petroleum product used as printing ink solvent for newspapers, magazines and packaging. From paperboard printing and from recycled fibers (if present), mineral oil migrates into food, even if dry, through the gas phase. Its toxicity is not fully evaluated, but a temporary Acceptable Daily Intake (ADI) of 0.6 mg kg-1 has been established for saturated mineral oil hydrocarbons (MOSH), while aromatic hydrocarbons (MOAH) are more toxic. Extraction and analysis of MOSH and MOAH is difficult due to the thousands of molecules present. Extraction methods for packaging and food have been optimized, then applied for a “shopping trolley survey” on over 100 Italian and Swiss market products. Instrumental analyses were performed with online LC-GC/FID. Average concentration of MOSH in paperboards was 626 mg kg-1. Many had the potential of contaminating foods exceeding temporary ADI tens of times. A long term migration study was then designed to better understand migration kinetics. Egg pasta and müesli were chosen as representative (high surface/weight ratio). They were stored at different temperatures (4, 20, 30, 40 and 60°C) and conditions (free, shelved or boxed packs) for 1 year. MOSH and MOAH kinetic curves show that migration is a fast process, mostly influenced by temperature: in egg pasta (food in direct contact with paperboard), half of MOSH is transferred to food in a week at 40°C and in 8 months at 20°C. The internal plastic bag present in müesli slowed down the startup of migration, creating a “lag time” in the curves.

Electrical scanning probe microscopy on organic optoelectronic structures

In the field of organic optoelectronics, the nanoscale structure of the materials has huge im-pact on the device performance. Here, scanning force microscopy (SFM) techniques become increasingly important. In addition to topographic information, various surface properties can be recorded on a nanometer length scale, such as electrical conductivity (conductive scanning force microscopy, C-SFM) and surface potential (Kelvin probe force microscopy, KPFM).rnrnIn the context of this work, the electrical SFM modes were applied to study the interplay be-tween morphology and electrical properties in hybrid optoelectronic structures, developed in the group of Prof. J. Gutmann (MPI-P Mainz). In particular, I investigated the working prin-ciple of a novel integrated electron blocking layer system. A structure of electrically conduct-ing pathways along crystalline TiO2 particles in an insulating matrix of a polymer derived ceramic was found and insulating defect structures could be identified. In order to get insights into the internal structure of a device I investigated a working hybrid solar cell by preparing a cross cut with focused ion beam polishing. With C-SFM, the functional layers could be identified and the charge transport properties of the novel active layer composite material could be studied. rnrnIn C-SFM, soft surfaces can be permanently damaged by (i) tip induced forces, (ii) high elec-tric fields and (iii) high current densities close to the SFM-tip. Thus, an alternative operation based on torsion mode topography imaging in combination with current mapping was intro-duced. In torsion mode, the SFM-tip vibrates laterally and in close proximity to the sample surface. Thus, an electrical contact between tip and sample can be established. In a series of reference experiments on standard surfaces, the working mechanism of scanning conductive torsion mode microscopy (SCTMM) was investigated. Moreover, I studied samples covered with free standing semiconducting polymer nano-pillars that were developed in the group of Dr. P. Theato (University Mainz). The application of SCTMM allowed non-destructive imag-ing of the flexible surface at high resolution while measuring the conductance on individual pillarsrnrnIn order to study light induced electrical effects on the level of single nanostructures, a new SFM setup was built. It is equipped with a laser sample illumination and placed in inert at-mosphere. With this photoelectric SFM, I investigated the light induced response in function-alized nanorods that were developed in the group of Prof. R. Zentel (University Mainz). A block-copolymer containing an anchor block and dye moiety and a semiconducting conju-gated polymer moiety was synthesized and covalently bound to ZnO nanorods. This system forms an electron donor/acceptor interface and can thus be seen as a model system of a solar cell on the nanoscale. With a KPFM study on the illuminated samples, the light induced charge separation between the nanorod and the polymeric corona could not only be visualized, but also quantified.rnrnThe results demonstrate that electrical scanning force microscopy can study fundamental processes in nanostructures and give invaluable feedback to the synthetic chemists for the optimization of functional nanomaterials.rn

Controllo del moto di una macchina automatica flessibile per il packaging

In questo studio viene sviluppato il controllo del moto di una macchina automatica per il packaging destinata a linee di media produttività con cambi formato rapidi. Il lavoro comprende la realizzazione di simulazioni dei gruppi macchina, la progettazione dei profili di moto da assegnare ai loro motori ed, infine, l'analisi dinamica e la verifica degli attuatori stessi.

Polymer-nanoparticle composites: from orientation phenomena to optoelectronic applications

Polymer-nanoparticle hybrids show synergistic effects, demonstrating both, the unique properties of nanosized structures and the good processability and functionalities of polymeric materials. This work shows the synthesis and application of block copolymers containing a soluble, functional block and a short anchor block, which efficiently binds to the surface of nanocrystals. We functionalized anisotropic, semiconducting nanoparticles, which can be dissolved in organic and polymeric matrices upon modification. The modified nanorods have the ability to form liquid crystalline phases, which behave similar to low molecular liquid crystals with a reversible clearing behaviour. These liquid crystalline phases could also be obtained in hole conducting matrices. For a macroscopic orientation of the nanorods, electric fields were applied and a switching (in analogy to known liquid crystals) to a homeotropic orientation was observed.rnBy introduction of dye molecules in the anchor block of a hole conducting block copolymer, all essential components of a solar cell can be combined in a single particle. Light absorption of the dye induces the injection of electrons into the particles, followed by a charging, that was monitored by a special AFM technique.rnLight emitting nanocrystals were functionalized analogously with a hole transporting polymer. The stability of the particles could be enhanced by the sterically stabilizing polymer corona and the particles showed improved properties in terms of processing. We applied these hybrid materials in light emitting devices, which showed better characteristics due to an improved hole injection and well dispersed emitting particles in the active device layer.rnThe work shows the broad spectrum of properties and applications based on the synergistic effects in hybrid and composite materials.

Diblock copolymer - nanocrystal hybrids for optoelectronic applications

Small, smaller, nano - it is a milestone in the development of new materials and technologies. Nanoscience is now present in our daily lives: in the car industry with self-cleaning surfaces, in medicine with cancer therapies, even our clothes and cosmetics utilize nanoparticles. The number and variety of applications has been growing fast in recent years, and the possibilities seem almost infinite. Nanoparticles made of inorganic materials have found applications in new electronic technologies, and organic nanomaterials have been added to resins to produce very strong but light weight materials.rnThis work deals with the combination of organic and inorganic materials for the fabrication of new, functional hybrid systems. For that purpose, block copolymers were made with a long, solubility-enhancing and semiconducting block, and a short anchor block. They were synthesized by either RAFT polymerization or Siegrist polycondensation. For the second block, an active ester was grafted on and subsequently reacted with the anchor molecules in a polymer analogue reaction. The resulting block copolymers had different properties; poly(para-phenylene vinylene) showed self-assembly in organic solvents, which resulted in gelling of the solution. The fibers from a diluted solution were visible through microscopy. When polymer chains were attached to TiO2 nanorods, the hybrids could be integrated into polymer fibers. A light-induced charge separation was demonstrated through KPFM. The polymer charged positively and the charge could travel along the fibers for several hundred nanometers. Polymers made via RAFT polymerization were based on poly(vinyltriphenylamine). Ruthenium chromophores which carried anchor groups were attached to the second block. These novel block copolymers were then attached to ZnO nanorods. A light-induced charge separation was also demonstrated in this system. The ability to disperse inorganic nanoparticles within the film is another advantage of these block copolymers. This was shown with the example of CdSe tetrapods. Poly(vinyltriphenylamine dimer) with disulfide anchor groups was attached to CdSe tetrapods. These four-armed nanoparticles are supposed to show very high charge transport. A polymer without anchor groups was also mixed with the tetrapods in order to investigate the influence of the anchor groups. It was shown that without them no good films were formed and the tetrapods aggregated heavily in the samples. Additionally, a large difference in the film qualities and the aggregation of the tetrapods was found in the sample of the polymer with anchor groups, dependent on the tetrapod arm length and the polymer loading. These systems are very interesting for hybrid solar cells. This work also illustrates similar systems with quantum dots. The influence of the energy level of the polymer on the hole transport from the polymer to the quantum dots, as well as on the efficiency of QLEDs was studied. For this purpose two different polymers were synthesized with different HOMO levels. It was clearly shown that the polymer with the adjusted lower HOMO level had a better hole injection to the quantum dots, which resulted in more efficient light emitting diodes.rnThese systems all have in common the fact that novel, and specially designed polymers, were attached to inorganic nanocrystals. All of these hybrid materials show fascinating properties, and are helpful in the research of new materials for optoelectronic applications.

Organic lasing: correlation between molecular structure, optical and optoelectronic properties

In this thesis mainly two alternating indenofluorene-phenanthrene copolymers were investigated with a variety of spectroscopic and optoelectronic experiments. The different experimental techniques allowed to retrieve deeper insights into their unique optical as well as optoelectronic properties. The motivation of the research presented in this work was to correlate their photophysical properties with respect to their application in electrically pumped lasing. This thesis begins with the description of optical properties studied by classical absorption and emission spectroscopy and successively describes an overall picture regarding their excited state dynamics occurring after photoexcitation studied by time-resolved spectroscopy. The different spectroscopic methods do not only allow to elucidate the different optical transitions occurring in this class of materials, but also contribute to a better understanding of exciton dynamics and exciton interaction with respect to the molecular structure as well as aggregation and photooxidation of the polymers. Furthermore, the stimulated emission properties were analyzed by amplified spontaneous emission (ASE) experiments. Especially one of the investigated materials, called BLUE-1, showed outstanding optical properties including a high optical gain, a low threshold for ASE and low optical losses. Apart from the optical experiments, the charge carrier mobility was measured with the time-of-flight technique and a comparably high hole mobility on the order of 1 x 10-² cm²/(Vs) was determined for BLUE-1 which makes this material promising for organic lasing. The impact of the high charge carrier mobility in this material class was further analyzed in different optoelectronic devices such as organic LEDs (OLEDs) and organic solar cells.

Revisione, Localizzazione e Traduzione del materiale dell'azienda Graziani Packaging

Il presente lavoro di tesi s’inserisce all’interno del progetto Language Toolkit, nato dalla collaborazione tra la Camera di Commercio di Forlì-Cesena e la Scuola di Lingue e Letterature, Traduzione e Interpretazione di Forlì, al fine di avvicinare il mondo dell’università al mondo del lavoro. In particolare, la tesi è frutto della collaborazione tra la laureanda e la Graziani Packaging, azienda italiana leader nel settore del packaging ortofrutticolo e industriale, e consiste nella revisione di una brochure, nella localizzazione del sito web www.graziani.com e nella traduzione di una presentazione PowerPoint, il tutto dall’italiano al tedesco. Il lavoro si compone di tre capitoli. Nel primo, che rappresenta un approfondimento teorico sul tema della localizzazione, si analizza nel dettaglio l’acronimo GILT, si espongono brevemente le tappe principali che hanno caratterizzato la nascita e lo sviluppo del settore della localizzazione e si esaminano le caratteristiche linguistiche, culturali e tecniche della localizzazione di siti web. Il secondo capitolo è dedicato al concetto di qualità in ambito traduttivo e al tema della revisione. In particolare, nella prima parte si analizzano gli standard di qualità professionali, i criteri di qualità proposti da Scarpa (2008) e la classificazione degli errori di traduzione sviluppata da Mossop (2001), mentre l’ultima parte riguarda il processo di revisione in concreto. Nel terzo capitolo, infine, vengono analizzati i tre testi di partenza forniti dall’azienda al traduttore (brochure, sito web e presentazione PowerPoint), e viene esposto e commentato il lavoro di revisione, localizzazione e traduzione degli stessi, ponendo una particolare enfasi sugli aspetti linguistici, culturali e tecnici più interessanti che lo hanno caratterizzato. La tesi si chiude con un glossario terminologico contenente i termini chiave, in italiano e in tedesco, relativi al dominio del packaging ortofrutticolo e industriale, individuati nel corso del lavoro di revisione, localizzazione e traduzione.

Studio di un algoritmo di controllo di temperatura per ganasce termosigillanti in macchine per packaging

Gli obiettivi dell'elaborato sono lo studio e la programmazione di un algoritmo di controllo di temperatura per le superfici termosaldanti di macchine per il packaging (confezionatrici in film a file multiple) prodotte dal committente, OMAG srl. L'algoritmo è implementato tramite il software SoMachineMotion v.4.2, prodotto da Schneider Electrics spa. Il controllo è di tipo in anello chiuso in retroazione, con temocoppie e resistenze di riscaldamento con modulazione PWM. Ci si è inizialmente occupati di testare su banco prova varie tipologie di regolatori: a relay, a isteresi, a ricerca diretta del duty cycle, TBH, con approccio misto TBH/integratore di Clegg, PID. I diversi metodi di regolazione sono stati valutati sulla base di una serie di metri di giudizio (precisione dell'inseguimento, prestazioni statiche e dinamiche, flessibilità, peso computazionale, facilità implementativa), pesati secondo i requisiti imposti dal committente. Le metodologie selezionate sono state PID e TBH/Clegg integrator; quest'ultima ha dato risultati assai soddisfacenti, pur essendo un metodo monoparametrico. Si sono quindi studiate diverse modalità per la taratura del regolatore PID, in particolare: tuning in anello chiuso con metodo a relay per la fase di pretuning, algoritmo di Nelder-Mead, per la ricerca diretta continua dei valori che minimizzano l'errore integrale, per un selftuning adattivo. Si è infine proceduto ad implementare le soluzioni individuate in un software robusto, che rispetti gli standard del settore e si sono inoltre sviluppate una serie di funzionalità aggiuntive, quali: modulazione software PWM, preriscaldamento, handling errori/warning, filtraggio segnali in/out. Si è addizionalmente sviluppato un modello matematico predittivo dell'evoluzione del sistema, che potrebbe servire, in un futuro sviluppo, come base per un controllo model-based in cascata al controllo in retroazione studiato.

Analisi e ottimizzazione delle prestazioni e dell'affidabilità di una macchina per il packaging di prodotti igienico-sanitari

L’oggetto di studio di questo lavoro, svolto presso l’azienda Vire Automation del gruppo Bucci Industries di Faenza, è una macchina per il packaging di prodotti igienico-sanitari, più precisamente pannolini baby. Dopo una prima indagine di mercato svolta con l’aiuto dei commerciali dell’azienda, si sono ipotizzate una serie di soluzioni tecniche per migliorare il funzionamento e le prestazioni della macchina. Tramite uno strumento detto Casa della qualità si sono evidenziate le soluzioni tecniche che risultano più apprezzate dal mercato e per questo posseggono una maggior priorità di realizzazione. Si è intervenuti su di un gruppo funzionale per lo spostamento orizzontale del prodotto che agisce superiormente rispetto al pianale di processo e sul trasporto pioli che invece agisce per ostacolo tra cilindri di acciaio ed i prodotti. In particolare per il primo si è realizzato un apposito studio delle grandezze cinematiche in gioco e, dopo una progettazione 3D, si sono stimate le coppie motrici richieste dal nuovo asse che è risultato vantaggioso rispetto al precedente. Per il secondo invece, vista l’esigenza di ottenere un gruppo rifasatore che permettesse alla macchina di funzionare correttamente nonostante i ritardi di arrivo dei prodotti dalla linea di produzione, si è realizzata una nuova gestione logica del gruppo per sopperire alla peggior condizione di funzionamento verificabile e si è riprogettato il gruppo per dotarlo delle nuove necessarie caratteristiche.

Reproducibility and day time bias correction of optoelectronic leg volumetry: a prospective cohort study

Background Leg edema is a common manifestation of various underlying pathologies. Reliable measurement tools are required to quantify edema and monitor therapeutic interventions. Aim of the present work was to investigate the reproducibility of optoelectronic leg volumetry over 3 weeks' time period and to eliminate daytime related within-individual variability. Methods Optoelectronic leg volumetry was performed in 63 hairdressers (mean age 45 ± 16 years, 85.7% female) in standing position twice within a minute for each leg and repeated after 3 weeks. Both lower leg (legBD) and whole limb (limbBF) volumetry were analysed. Reproducibility was expressed as analytical and within-individual coefficients of variance (CVA, CVW), and as intra-class correlation coefficients (ICC). Results A total of 492 leg volume measurements were analysed. Both legBD and limbBF volumetry were highly reproducible with CVA of 0.5% and 0.7%, respectively. Within-individual reproducibility of legBD and limbBF volumetry over a three weeks' period was high (CVW 1.3% for both; ICC 0.99 for both). At both visits, the second measurement revealed a significantly higher volume compared to the first measurement with a mean increase of 7.3 ml ± 14.1 (0.33% ± 0.58%) for legBD and 30.1 ml ± 48.5 ml (0.52% ± 0.79%) for limbBF volume. A significant linear correlation between absolute and relative leg volume differences and the difference of exact day time of measurement between the two study visits was found (P < .001). A therefore determined time-correction formula permitted further improvement of CVW. Conclusions Leg volume changes can be reliably assessed by optoelectronic leg volumetry at a single time point and over a 3 weeks' time period. However, volumetry results are biased by orthostatic and daytime-related volume changes. The bias for day-time related volume changes can be minimized by a time-correction formula.

Assessing Commonality and Differentiation for Packaging-Family Planning with Application to Medication Labels

This thesis presents a metric for assessing the commonality and differentiation of packaging-family planning with application to medical labels along with supporting background research and findings. Consumable products such as medications rely on the package or label to represent the contents. Package confusion has been widely recognized as a major problem for both over-the-counter and pharmacy-dispensed medications with potentially lethal consequences. It is critical to identify a medication as a member of a product family and differentiate its contributing elements based on visual features on the package or label to avoid consumer confusion and reduce dispensing errors. Indices that indicate degrees of commonality and differentiation of features in consumer products such as batteries, light bulbs, handles, etc for platforms have been shown to benefit development of engineered product families [6]. It is possible to take a similar approach for visual features in packaging such as typography, shape/form, imagery and color to benefit packaging-family development. This thesis establishes a commonality differentiation index for prominence of visual features on over-the-counter and pharmacy-dispensed medications based on occurrence, size, and location of features. It provides a quantitative measure to assist package designers in evaluating alternatives to satisfy strategic goals and improve safety. The index is demonstrated with several medications that have been identified by the Institute for Safe Medication Practice as commonly confused.

Nanomechanics of cellulose crystals and cellulose-based polymer composites

Cellulose-polymer composites have potential applications in aerospace and transportation areas where lightweight materials with high mechanical properties are needed. In addition, these economical and biodegradable composites have been shown to be useful as polymer electrolytes, packaging structures, optoelectronic devices, and medical implants such as wound dressing and bone scaffolds. In spite of the above mentioned advantages and potential applications, due to the difficulties associated with synthesis and processing techniques, application of cellulose crystals (micro and nano sized) for preparation of new composite systems is limited. Cellulose is hydrophilic and polar as opposed to most of common thermoplastics, which are non-polar. This results in complications in addition of cellulose crystals to polymer matrices, and as a result in achieving sufficient dispersion levels, which directly affects the mechanical properties of the composites. As in other composite materials, the properties of cellulose-polymer composites depend on the volume fraction and the properties of individual phases (the reinforcement and the polymer matrix), the dispersion quality of the reinforcement through the matrix and the interaction between CNCs themselves and CNC and the matrix (interphase). In order to develop economical cellulose-polymer composites with superior qualities, the properties of individual cellulose crystals, as well as the effect of dispersion of reinforcements and the interphase on the properties of the final composites should be understood. In this research, the mechanical properties of CNC polymer composites were characterized at the macro and nano scales. A direct correlation was made between: Dispersion quality and macro-mechanical properties Nanomechanical properties at the surface and tensile properties CNC diameter and interphase thickness Lastly, individual CNCs from different sources were characterized and for the first time size-scale effect on their nanomechanical properties were reported. Then the effect of CNC surface modification on the mechanical properties was studied and correlated to the crystalline structure of these materials.