Observations on the wastage of raw material and recovery of meat in the prawn processing industry

The wastage of prawns due to spoilage in processing factories accounted to about 0-12% in 1974, 0-35% in 1975, 0-3% in 1976 and 0-4% in 1977. Spoilage increases with the time lag between catching and processing and also due to defective icing. The paper discusses the counts of whole prawns required for obtaining meat of specified size grades.

Studies on isolation of salmonella from sea foods 1. Comparison of enrichment and selective media for recovery of salmonellae from fish

Three enrichment broths and six plating media were compared for efficiency of detection Salmonella in the presence of numbers of Coliforms (10super(5)/ml) and proteus (10super(3)/ml) from artificially inoculated fish samples. Recovery experiments Salmonella anatum, S. typhimurium and S. enteritidis indicated that the two enrichment broths Dulcitol Selinite (DSE) and Selinite Cystine (SC) were equally efficient. Further, the viability of Salmonella, inoculated into fish muscle and kept at 4°C for 48 hours, was found to be not affected by the low temperature storage. Selective plating media like Xylose Lysine Deoxycholate agar (XLD), Brilliant Green Sulphadiazine agar (BGS) and Brilliant Green agar (BG) were found to be superior in performance to Salmonella-Shigella agar: (SS) and Bismuth Sui phite agar (BiS).

CORRELATION OF ZONA-BINDING WITH OOCYTE MATURATION AND SPERM MOTILITY IN RHESUS-MONKEYS BY HEMIZONA ASSAY

The hemizona assay (HZA) in Rhesus monkeys was employed to study the correlation of zona-binding ability with sperm motility or with naturally developing oocytes at various maturational stages. Oocytes from unstimulated ovaries were retrieved within 2 hr from monkeys sacrificed for vaccine production (in reproductive season, but with their menstrual cycles not determined). Oocytes were divided into four groups based on their morphological maturation: 1) Oocytes surrounded by more than one cumulus layer (MC); 2) Oocytes retaining intact germinal vesicle nuclei (GV); 3) Oocytes with germinal vesicle breakdown showing distinct perivitelline space (PVS); and 4) Oocytes extruding the first polar body (PB1). The mean numbers of sperm bound to hemizona for PBI, PVS, GV, and MC groups were 132.9 +/- 12.0, 71.5 +/- 10.1, 36.1 +/- 4.0, and 20.1 +/- 2.9 (Mean +/- SE), respectively. The four groups showed significant differences from each other in sperm/egg binding ability (P < 0.01). The number of bound sperm significantly increased with oocyte maturation. The present study also showed that zona-binding ability was also affected by sperm motility. For sperm with 67.7% motility and sperm with 31.2% motility, the average numbers of bound sperm were 43.5 +/- 2.2 and 25.3 +/- 2.9 (Mean +/- SE), respectively. There was significantly higher binding ability for sperm with higher motility (P < 0.01). The results suggest that: 1)The rhesus monkey model can serve as a very sensitive model for studying sperm/egg interaction by HZA; 2) Sperm motility positively correlated with sperm/egg binding; and 3) Sperm/egg binding ability increases with oocyte maturation. The binding ability is highest when oocytes matured to the PB1 stage, which is also the best opportunity for fertilization. This is strong evidence for the ''zona maturation'' hypothesis. (C) 1994 Wiley-Liss, Inc.

Physiological and biochemical study of over-ripened oocyte in the cultivated Caspian brown trout (Salmo trutta caspius) and determination of egg quality markers

To determine the best time for egg stripping after ovulation and over-ripened oocyte in the Caspian brown trout (Salmo trutta caspius), the eggs were retained in the parental abdominal cavity for 40 days post-ovulation (DPO) at 7±0.6°C. Eggs were stripped every 10-day interval in 4 treatment and were fertilized with a pool of semen obtained from 8 males. Also, the physiology and biochemistry of the eggs and ovarian fluids were studied. Results showed that the level of eyed eggs and hatched alevins declined with over-ripening time: that is, the expected amounts (90.65 ± 6.28% for eyeing and 86.33 ± 6.82% for hatching) in newly ovulated eggs (0–10 DPO) decreased to 0.67 ± 1.34% and 0.49 ± 0.98%, respectively, in over-ripened eggs (30–40 DPO). However, larval abnormalities remained constant for 30-days after ovulation. During the course of oocyte over-ripening, the pH of the ovarian fluid significantly decreased and the concentration of glucose, protein, calcium, iron, and aspartate aminotransferase activity significantly increased. Moreover, the concentration of protein, triglycerides, and aspartate aminotransferase activity in the eggs also changed. In the newly ovulated egg, the yolk consisted of homogenous tissue and its perivitelline space diameter had no considerable differences. With over-ripening, the yolk became heterogeneous, while chorion diameter and micropyle did not change. The perivitelline space diameter varied among different areas. The present study demonstrated that the best time to take Caspian brown trout eggs after ovulation at 7± 0.6°C was up to 10 DPO. Among the studied parameters of the egg and ovarian fluid, egg quality was related to both ovarian fluid parameters (e.g., pH, protein, aspartate aminotransferase, glucose, cholesterol, triglycerides, calcium, iron) and egg parameters (e.g., cholesterol, triglycerides, iron, aspartate aminotransferase). Thus, these parameters can be used as a egg quality markers in this species.

Fish tagging experiments: a prelude to an extensive tag-recovery programme on Lake Victoria

The present study is an early stage of this programme and examines several species of fishes under controlled conditions to delineate responses to tagging as a function of type of tag, species, size, and sex of fish, and position of tag placement. It is intimately related to another phase of research currently being conducted by the author on age and growth of several species important to the fishery of Lake Victoria (e.g. Tilapia spp., and several catfishes, Clarias mossambicus Peters and Bagrus docmac (Forskal). Data reported are both a reflection of growth studies and an attempt to achieve insight into tag loss, growth, and mortality that might be expected to occur in these species under lake conditions with reference to the above parameters.

Fast L0-based sparse signal recovery

This paper develops an algorithm for finding sparse signals from limited observations of a linear system. We assume an adaptive Gaussian model for sparse signals. This model results in a least square problem with an iteratively reweighted L2 penalty that approximates the L0-norm. We propose a fast algorithm to solve the problem within a continuation framework. In our examples, we show that the correct sparsity map and sparsity level are gradually learnt during the iterations even when the number of observations is reduced, or when observation noise is present. In addition, with the help of sophisticated interscale signal models, the algorithm is able to recover signals to a better accuracy and with reduced number of observations than typical L1-norm and reweighted L1 norm methods. ©2010 IEEE.

Strategies for product recovery decisions

Product recovery is beset by uncertainty regarding the quality of end-of-life (EOL) products, and in order to ascertain the reusability of these products, they have to undergo expensive tests. This undermines the profitability of the recovery process. The key to improve the effectiveness of product recovery is to improve the quality of information available before testing. Emerging data capture technologies can significantly improve the availability of information. However, in order to maximise the potential of these technologies, appropriate decision-making algorithms that exploit such information must be developed. We model the recovery process using a decision-theoretic approach, and derive strategies to ascertain the reusability of EOL products, and also to decide when tests are beneficial. We show that improving the quality of information leads to increase in effectiveness of the recovery process by reducing the need for tests. Copyright © 2009 Inderscience Enterprises Ltd.

Energy recovery from high-frequency clocks using DC-DC converters

Large digital chips use a significant amount of energy to distribute a multi-GHz clock. By discharging the clock network to ground every cycle, the energy stored in this large capacitor is wasted. Instead, the energy can be recovered using an on-chip DC-DC converter. This paper investigates the integration of two DC-DC converter topologies, boost and buck-boost, with a high-speed clock driver. The high operating frequency significantly shrinks the required size of the L and C components so they can be placed on-chip; typical converters place them off-chip. The clock driver and DC-DC converter are able to share the entire tapered buffer chain, including the widest drive transistors in the final stage. To achieve voltage regulation, the clock duty cycle must be modulated; implying only single-edge-triggered flops should be used. However, this minor drawback is eclipsed by the benefits: by recovering energy from the clock, the output power can actually exceed the additional power needed to operate the converter circuitry, resulting in an effective efficiency greater than 100%. Furthermore, the converter output can be used to operate additional power-saving features like low-voltage islands or body bias voltages. ©2008 IEEE.