Free convection heat transfer through coupled thermal boundary layers in a partitioned triangular enclosure

A numerical investigation has been carried out for the coupled thermal boundary layers on both sides of a partition placed in an isosceles triangular enclosure along its middle symmetric line. The working fluid is considered as air which is initially quiescent. A sudden temperature difference between two zones of the enclosure has been imposed to trigger the natural convection. It is anticipated from the numerical simulations that the coupled thermal boundary layers development adjacent to the partition undergoes three distinct stages; namely an initial stage, a transitional stage and a steady state stage. Time dependent features of the coupled thermal boundary layers as well as the overall natural convection flow in the partitioned enclosure have been discussed and compared with the non-partitioned enclosure. Moreover, heat transfer as a form of local and overall average Nusselt number through the coupled thermal boundary layers and the inclined walls is also examined. The details results will be discussed in the full paper.

Communications and learning structures that facilitate transfer of knowledge at innovation transition points

Innovation processes are rarely smooth and disruptions often occur at transition points were one knowledge domain passes the technology on to another domain. At these transition points communication is a key component in assisting the smooth hand over of technologies. However for smooth transitions to occur we argue that appropriate structures have to be in place and boundary spanning activities need to be facilitated. This paper presents three case studies of innovation processes and the findings support the view that structures and boundary spanning are essential for smooth transitions. We have explained the need to pass primary responsibility between agents to successfully bring an innovation to market. We have also shown the need to combine knowledge through effective communication so that absorptive capacity is built in process throughout the organisation rather than in one or two key individuals.

The inherent challenges of knowledge transfer across countries and cultures

Purpose — The purpose of this chapter is to outline the findings of research into knowledge transfer across countries and culture and the implications of the findings for human resource practitioners. Methodology/approach — Use of a qualitative case study methodology approach was employed. Findings — The findings highlight the inherent difficulty of knowledge transfer and the broad range of factors that influence the knowledge transfer process and which are connected together in a complex and non-linear manner. Research implications — The research revealed insight into those managers most likely to be effective at knowledge transfer and what characteristics and experiences had supported this openness to knowledge from outside of their cultural context. The lessons from the research can be incorporated into the selection and development processes for expatriates. Originality value — The study affirmed the critical importance of face-to-face interaction in knowledge transfer. The research also resulted in the development of a practical model and tool, which pulls together the broad range of factors that impact on knowledge transfer.

Can transfer of learning be enriched by valuing knowledge transformation and co-creation? Exploring new ways to improve training design

This paper argues that a possible cause of issues with management education outcomes is the fact that most training models operate from a limited ‘transfer’ metaphor. This theoretical paper contends that by reconceptualising existing models, specifically Holton’s transfer of learning model, to incorporate multiple processes and acknowledge the importance of educator- or trainer-student interaction in co-creating knowledge, there is potential to improve training design and ultimately achieve more satisfactory training outcomes.

Crowded Diphosphinomethane Ligands in Catalysis: [(R2PCH2PR′2-κ2P)-NiR″]+ Cations for Ethylene Polymerization without Activators

The preparation of a series of nickel dichloride complexes with bulky diphosphinomethane chelate ligands R2PCH2PR′2 is reported. Reaction with the appropriate Grignard reagent leads to the corresponding dimethyl and dibenzyl complexes. Cationic monomethyl and mono-η3-benzyl complexes are generated from these dialkyl complexes by protonation with [H(OEt2)2]+[B(3,5-(CF3)2C6H3)4]−, while the complex [(dtbpm κ2P)Ni(η3-CH(CH2Ph)Ph]+[B(3,5-(CF3)2C6H3)4]−is obtained from protonation of the Ni(0) olefin complex (dtbpm-κ2P)N(η2-trans-stilbene). Crystal structures of examples of dichlorides, dimethyl, dibenzyl, cationic methyl, and cationic η3-benzyl complexes are reported. Solutions of the cations polymerize ethylene under mild conditions and without the necessity of an activating agent, to form polyethylene having high molecular weights and low degrees of chain branching. In comparison to the Ni methyl cations, the η3-benzyl cation complexes are more stable and somewhat less active but still very efficient in C2H4 polymerization. The effect on the resulting polyethylene of varying the substituents R, R′ on the phosphine ligand has been examined, and a clear trend for longer chain PE with less branching in the presence of more bulky substituents on the diphosphine has been found. Density functional calculations have been used to examine the rapid suprafacial η3 to η3 haptotropic shift processes of the[(R2PCH2PR′2)Ni] fragment and the η3−η1 change of the coordination mode of the benzyl group required for polymerization in those cations.

Arc voltage behavior in GMAW-P under different drop transfer modes

Purpose: Experimental measurements have been made to investigate meaning of the change in voltage for the pulse gas metal arc welding (GMAW-P) process operating under different drop transfer modes. Design/methodology/approach: Welding experiments with different values of pulsing parameter and simultaneous recording of high speed camera pictures and welding signals (such as current and voltage) were used to identify different drop transfer modes in GMAW-P. The investigation is based on the synchronization of welding signals and high speed camera to study the behaviour of voltage signal under different drop transfer modes. Findings: The results reveal that the welding arc is significantly affected by the molten droplet detachment. In fact, results indicate that sudden increase and drop in voltage just before and after the drop detachment can be used to characterize the voltage behaviour of different drop transfer mode in GMAW-P. Research limitations/implications: The results show that voltage signal carry rich information about different drop transfer occurring in GMAW-P. Hence it’s possible to detect different drop transfer modes. Future work should concentrate on development of filters for detection of different drop transfer modes. Originality/value: Determination of drop transfer mode with GMAW-P is crucial for the appropriate selection of pulse welding parameters. As change in drop transfer mode results in poor weld quality in GMAW-P, so in order to estimate the working parameters and ensure stable GMAW-P understanding the voltage behaviour of different drop transfer modes in GMAW-P will be useful. However, in case of GMAW-P hardly any attempt is made to analyse the behaviour of voltage signal for different drop transfer modes. This paper analyses the voltage signal behaviour of different drop transfer modes for GMAW-P.

Core-shell microspheres with surface grafted poly(vinyl alcohol) as drug carriers for the treatment of hepatocellular carcinoma

Core(polyvinyl neodecanoate-ethylene glycol dimethacrylate)-shell(polyvinyl alcohol) (core (P(VND-EGDMA))-shell(PVA)) microspheres were developed by seeded polymerization with the use of conventional free radical and RAFT/MADIX mediated polymerization. Poly(vinyl pivalate) PVPi was grafted onto microspheres prepared via suspension polymerization of vinylneodecanoate and ethylene glycol dimethacrylate. The amount of grafted polymer was found to be independent from the technique used with conventional free radical polymerization and MADIX polymerization resulting into similar shell thicknesses. Both systems—grafting via free radical polymerization or the MADIX process—were found to follow slightly different kinetics. While the free radical polymerization resulted in a weight gain linear with the monomer consumption in solution the growth in the MADIX controlled system experienced a delay. The core-shell microspheres were obtained by hydrolysis of the poly(vinyl pivalate) surface grafted brushes to form poly(vinyl alcohol). During hydrolysis the microspheres lost a significant amount of weight, consistent with the hydrolysis of 40–70% of all VPi units. Drug loading was found to be independent of the shell layer thickness, suggesting that the drug loading is governed by the amount of bulk material. The shell layer does not appear to represent an obstacle to the drug ingress. Cell testing using colorectal cancer cell lines HT 29 confirm the biocompatibility of the empty microspheres whereas the clofazimine loaded particles lead to 50% cell death, confirming the release of the drug.

Technology transfer evaluation in the high technology industry : an interdisciplinary perspective

The underlying objective of this study was to develop a novel approach to evaluate the potential for commercialisation of a new technology. More specifically, this study examined the 'ex-ante'. evaluation of the technology transfer process. For this purpose, a technology originating from the high technology sector was used. The technology relates to the application of software for the detection of weak signals from space, which is an established method of signal processing in the field of radio astronomy. This technology has the potential to be used in commercial and industrial areas other than astronomy, such as detecting water leakages in pipes. Its applicability to detecting water leakage was chosen owing to several problems with detection in the industry as well as the impact it can have on saving water in the environment. This study, therefore, will demonstrate the importance of interdisciplinary technology transfer. The study employed both technical and business evaluation methods including laboratory experiments and the Delphi technique to address the research questions. There are several findings from this study. Firstly, scientific experiments were conducted and these resulted in a proof of concept stage of the chosen technology. Secondly, validation as well as refinement of criteria from literature that can be used for „ex-ante. evaluation of technology transfer has been undertaken. Additionally, after testing the chosen technology.s overall transfer potential using the modified set of criteria, it was found that the technology is still in its early stages and will require further development for it to be commercialised. Furthermore, a final evaluation framework was developed encompassing all the criteria found to be important. This framework can help in assessing the overall readiness of the technology for transfer as well as in recommending a viable mechanism for commercialisation. On the whole, the commercial potential of the chosen technology was tested through expert opinion, thereby focusing on the impact of a new technology and the feasibility of alternate applications and potential future applications.

Life Raft Australia?

In the helter skelter of people legally and illegally seeking refuge in Australia, often overlooked are the realities of how to obtain that hoped for better life. One of the avenues chosen to achieve their dream is higher education; however, once enrolled in higher education many such students [termed Culturally and Linguistically Diverse (CALD)] find they are ill equipped to achieve academic success; they become overwhelmed by the pressures of study/family/work; and ultimately lose heart and their place at university. Life raft Australia has just become another disillusioning vehicle to a depressing future. This paper discusses how universities across Australia are now putting processes in place that will enable CALD students to confront and overcome academic and social barriers, and thus realise their dream of a better life. Exemplars from the University of Tasmania provide practical models of how higher education institutions, not only in Australia but globally can assist immigrant students to self actualize; to be empowered to become integral and successful members of the Australian community.

Life Raft Australia?

In the helter skelter of people legally and illegally seeking refuge in Australia, often overlooked are the realities of how to obtain that hoped for better life. One of the avenues chosen to achieve their dream is higher education; however, once enrolled in higher education many such students [termed Culturally and Linguistically Diverse (CALD)] find they are ill equipped to achieve academic success; they become overwhelmed by the pressures of study/family/work; and ultimately lose heart and their place at university. Life raft Australia has just become another disillusioning vehicle to a depressing future. This paper discusses how universities across Australia are now putting processes in place that will enable CALD students to confront and overcome academic and social barriers, and thus realise their dream of a better life. Exemplars from the University of Tasmania provide practical models of how higher education institutions, not only in Australia but globally can assist immigrant students to self actualize; to be empowered to become integral and successful members of the Australian community.

The traditional rationale of the arm’s length approach to transfer pricing : should the separate accounting model be maintained for modern multinational entities?

This article examines the current transfer pricing regime to consider whether it is a sound model to be applied to modern multinational entities. The arm's length price methodology is examined to enable a discussion of the arguments in favour of such a regime. The article then refutes these arguments concluding that, contrary to the very reason multinational entities exist, applying arm's length rules involves a legal fiction of imagining transactions between unrelated parties. Multinational entities exist to operate in a way that independent entities would not, which the arm's length rules fail to take into account. As such, there is clearly an air of artificiality in applying the arm's length standard. To demonstrate this artificiality with respect to modern multinational entities, multinational banks are used as an example. The article concluded that the separate entity paradigm adopted by the traditional transfer pricing regime is incongruous with the economic theory of modern multinational enterprises.

International transfer pricing : the Australian approach and lessons for Canada

In response to developments in international trade and an increased focus on international transfer-pricing issues, Canada’s minister of finance announced in the 1997 budget that the Department of Finance would undertake a review of the transfer-pricing provisions in the Income Tax Act. On September 11, 1997, the Department of Finance released draft transfer-pricing legislation and Revenue Canada released revised draft Information Circular 87-2R. The legislation was subsequently amended and included in Bill C-28, which received first reading on December 10, 1997. The new rules are intended to update Canada’s international transfer-pricing practices. In particular, they attempt to harmonize the standards in the Income Tax Act with the arm’s-length principle established in the OECD’s transfer pricing guidelines. The new rules also set out contemporaneous documentation requirements in respect of cross-border related-party transactions, facilitate administration of the law by Revenue Canada, and provide for a penalty where transfer prices do not comply with the arm’s-length principle. The Australian tax authorities have similarly reviewed and updated their transfer-pricing practices. Since 1992, the Australian commissioner of taxation has issued three rulings and seven draft rulings directly relating to international transfer pricing. These rulings outline the selection and application of transfer pricing methodologies, documentation requirements, and penalties for non-compliance. The Australian Taxation Office supports the use of advance pricing agreements (APAs) and has expanded its audit strategy by conducting transfer-pricing risk assessment reviews. This article presents a detailed review of Australia’s transfer-pricing policy and practices, which address essentially the same concerns as those at which the new Canadian rules are directed. This review provides a framework for comparison of the approaches adopted in the two jurisdictions. The author concludes that although these approaches differ in some respects, ultimately they produce a similar result. Both regimes set a clear standard to be met by multinational enterprises in establishing transfer prices. Both provide for audits and penalties in the event of noncompliance. And both offer the alternative of an APA as a means of avoiding transfer-pricing disputes with Australian and Canadian tax authorities.