Settling analysis of MOS regulated current mirrors applied to micropower D/A converters

This paper provides an insight to the trade-off between settling time and power consumption in regulated current mirrors as building parts in micropower current-switching D/A converters. The regulation-loop frequency characteristic is obtained and difficulties to impose a dominant-pole condition to the resulting 2nd-order system are evaluated. Raising pole frequencies in micropower circuits, while meeting consumption requirements, is basically limited by parasitic capacitances. For such cases, an alternative is to impose a twin-pole condition in which design constraints are somewhat relieved and settling slightly improved. Relationships between pole frequencies, transistor geometry and bias are established and design guidelines for regulated current mirrors founded. By placing loop-transistors in either weak or strong inversion, small (W/L) ratios are allowed and stray capacitances reduced. Simulated waveforms suggest a good agreement with theory. The proposed approach applied to the design of a micropower current-mode D/A converter improves both simulated and experimental settling performance.

Optimum-Path Forest Classifier for Large Scale Biometric Applications

This paper addresses biometric identification using large databases, in particular, iris databases. In such applications, it is critical to have low response time, while maintaining an acceptable recognition rate. Thus, the trade-off between speed and accuracy must be evaluated for processing and recognition parts of an identification system. In this paper, a graph-based framework for pattern recognition, called Optimum-Path Forest (OPF), is utilized as a classifier in a pre-developed iris recognition system. The aim of this paper is to verify the effectiveness of OPF in the field of iris recognition, and its performance for various scale iris databases. The existing Gauss-Laguerre Wavelet based coding scheme is used for iris encoding. The performance of the OPF and two other - Hamming and Bayesian - classifiers, is compared using small, medium, and large-scale databases. Such a comparison shows that the OPF has faster response for large-scale databases, thus performing better than the more accurate, but slower, classifiers.

On optimizing micropower MOS regulated cascode circuits on switched current techniques

Trade-off between settling time and micropower consumption in MOS regulated cascode current sources as building parts in high-accuracy, current-switching D/A converters is analyzed. The regulation-loop frequency characteristic is obtained and difficulties to impose a dominant-pole condition to the resulting 2nd-order system are discussed. Raising pole frequencies while meeting consumption requirements is basically limited by parasitic capacitances. An alternative is found by imposing a twin-pole system in which design constraints are somewhat relaxed and settling slightly faster. Relationships between pole frequencies, transistor geometry and bias are established. Simulated waveforms obtained with PSpice of designed circuits following a voltage perturbation suggest a good agreement with theory. The proposed approach applied to the design of a micropower current-mode D/A converter improves its simulated settling performance.

Extended Hierarchical Censored Production Rules (EHCPRs) system: An approach toward generalized knowledge representation

One common problem in all basic techniques of knowledge representation is the handling of the trade-off between precision of inferences and resource constraints, such as time and memory. Michalski and Winston (1986) suggested the Censored Production Rule (CPR) as an underlying representation and computational mechanism to enable logic based systems to exhibit variable precision in which certainty varies while specificity stays constant. As an extension of CPR, the Hierarchical Censored Production Rules (HCPRs) system of knowledge representation, proposed by Bharadwaj & Jain (1992), exhibits both variable certainty as well as variable specificity and offers mechanisms for handling the trade-off between the two. An HCPR has the form: Decision If(preconditions) Unless(censor) Generality(general_information) Specificity(specific_information). As an attempt towards evolving a generalized knowledge representation, an Extended Hierarchical Censored Production Rules (EHCPRs) system is suggested in this paper. With the inclusion of new operators, an Extended Hierarchical Censored Production Rule (EHCPR) takes the general form: Concept If (Preconditions) Unless (Exceptions) Generality (General-Concept) Specificity (Specific Concepts) Has_part (default: structural-parts) Has_property (default:characteristic-properties) Has_instance (instances). How semantic networks and frames are represented in terms of an EHCPRs is shown. Multiple inheritance, inheritance with and without cancellation, recognition with partial match, and a few default logic problems are shown to be tackled efficiently in the proposed system.

Variational studies and replica symmetry breaking in the generalization problem of the binary perceptron

We analyze the average performance of a general class of learning algorithms for the nondeterministic polynomial time complete problem of rule extraction by a binary perceptron. The examples are generated by a rule implemented by a teacher network of similar architecture. A variational approach is used in trying to identify the potential energy that leads to the largest generalization in the thermodynamic limit. We restrict our search to algorithms that always satisfy the binary constraints. A replica symmetric ansatz leads to a learning algorithm which presents a phase transition in violation of an information theoretical bound. Stability analysis shows that this is due to a failure of the replica symmetric ansatz and the first step of replica symmetry breaking (RSB) is studied. The variational method does not determine a unique potential but it allows construction of a class with a unique minimum within each first order valley. Members of this class improve on the performance of Gibbs algorithm but fail to reach the Bayesian limit in the low generalization phase. They even fail to reach the performance of the best binary, an optimal clipping of the barycenter of version space. We find a trade-off between a good low performance and early onset of perfect generalization. Although the RSB may be locally stable we discuss the possibility that it fails to be the correct saddle point globally. ©2000 The American Physical Society.

Meeting the millennium poverty reduction targets in Latin America and the Caribbean

Includes bibliography

Mapeamento do relevo do embasamento de bacias sedimentares através da inversão gravimétrica vinculada

Apresentamos três novos métodos estáveis de inversão gravimétrica para estimar o relevo de uma interface arbitrária separando dois meios. Para a garantia da estabilidade da solução, introduzimos informações a priori sobre a interface a ser mapeada, através da minimização de um (ou mais) funcional estabilizante. Portanto, estes três métodos se diferenciam pelos tipos de informação físico-geológica incorporados. No primeiro método, denominado suavidade global, as profundidades da interface são estimadas em pontos discretos, presumindo-se o conhecimento a priori sobre o contraste de densidade entre os meios. Para a estabilização do problema inverso introduzimos dois vínculos: (a) proximidade entre as profundidades estimadas e verdadeiras da interface em alguns pontos fornecidas por furos de sondagem; e (b) proximidade entre as profundidades estimadas em pontos adjacentes. A combinação destes dois vínculos impõe uma suavidade uniforme a toda interface estimada, minimizando, simultaneamente em alguns pontos, os desajustes entre as profundidades conhecidas pelas sondagens e as estimadas nos mesmos pontos. O segundo método, denominado suavidade ponderada, estima as profundidades da interface em pontos discretos, admitindo o conhecimento a priori do contraste de densidade. Neste método, incorpora-se a informação geológica que a interface é suave, exceto em regiões de descontinuidades produzidas por falhas, ou seja, a interface é predominantemente suave porém localmente descontínua. Para a incorporação desta informação, desenvolvemos um processo iterativo em que três tipos de vínculos são impostos aos parâmetros: (a) ponderação da proximidade entre as profundidades estimadas em pontos adjacentes; (b) limites inferior e superior para as profundidades; e (c) proximidade entre todas as profundidades estimadas e um valor numérico conhecido. Inicializando com a solução estimada pelo método da suavidade global, este segundo método, iterativamente, acentua as feições geométricas presentes na solução inicial; ou seja, regiões suaves da interface tendem a tornar-se mais suaves e regiões abruptas tendem a tornar-se mais abruptas. Para tanto, este método atribui diferentes pesos ao vínculo de proximidade entre as profundidades adjacentes. Estes pesos são automaticamente atualizados de modo a acentuar as descontinuidades sutilmente detectadas pela solução da suavidade global. Os vínculos (b) e (c) são usados para compensar a perda da estabilidade, devida à introdução de pesos próximos a zero em alguns dos vínculos de proximidade entre parâmetros adjacentes, e incorporar a informação a priori que a região mais profunda da interface apresenta-se plana e horizontal. O vínculo (b) impõe, de modo estrito, que qualquer profundidade estimada é não negativa e menor que o valor de máxima profundidade da interface conhecido a priori; o vínculo (c) impõe que todas as profundidades estimadas são próximas a um valor que deliberadamente viola a profundidade máxima da interface. O compromisso entre os vínculos conflitantes (b) e (c) resulta na tendenciosidade da solução final em acentuar descontinuidades verticais e apresentar uma estimativa suave e achatada da região mais profunda. O terceiro método, denominado mínimo momento de inércia, estima os contrastes de densidade de uma região da subsuperfície discretizada em volumes elementares prismáticos. Este método incorpora a informação geológica que a interface a ser mapeada delimita uma fonte anômala que apresenta dimensões horizontais maiores que sua maior dimensão vertical, com bordas mergulhando verticalmente ou em direção ao centro de massa e que toda a massa (ou deficiência de massa) anômala está concentrada, de modo compacto, em torno de um nível de referência. Conceitualmente, estas informações são introduzidas pela minimização do momento de inércia das fontes em relação ao nível de referência conhecido a priori. Esta minimização é efetuada em um subespaço de parâmetros consistindo de fontes compactas e apresentando bordas mergulhando verticalmente ou em direção ao centro de massa. Efetivamente, estas informações são introduzidas através de um processo iterativo inicializando com uma solução cujo momento de inércia é próximo a zero, acrescentando, em cada iteração, uma contribuição com mínimo momento de inércia em relação ao nível de referência, de modo que a nova estimativa obedeça a limites mínimo e máximo do contraste de densidade, e minimize, simultaneamente, os desajustes entre os dados gravimétricos observados e ajustados. Adicionalmente, o processo iterativo tende a "congelar" as estimativas em um dos limites (mínimo ou máximo). O resultado final é uma fonte anômala compactada em torno do nível de referência cuja distribuição de constraste de densidade tende ao limite superior (em valor absoluto) estabelecido a priori. Estes três métodos foram aplicados a dados sintéticos e reais produzidos pelo relevo do embasamento de bacias sedimentares. A suavidade global produziu uma boa reconstrução do arcabouço de bacias que violam a condição de suavidade, tanto em dados sintéticos como em dados da Bacia do Recôncavo. Este método, apresenta a menor resolução quando comparado com os outros dois métodos. A suavidade ponderada produziu uma melhoria na resolução de relevos de embasamentos que apresentam falhamentos com grandes rejeitos e altos ângulos de mergulho, indicando uma grande potencialidade na interpretação do arcabouço de bacias extensionais, como mostramos em testes com dados sintéticos e dados do Steptoe Valley, Nevada, EUA, e da Bacia do Recôncavo. No método do mínimo momento de inércia, tomou-se como nível de referência o nível médio do terreno. As aplicações a dados sintéticos e às anomalias Bouguer do Graben de San Jacinto, California, EUA, e da Bacia do Recôncavo mostraram que, em comparação com os métodos da suavidade global e ponderada, este método estima com excelente resolução falhamentos com pequenos rejeitos sem impor a restrição da interface apresentar poucas descontinuidades locais, como no método da suavidade ponderada.

Energetic-environmental assessment of a scenario for Brazilian cellulosic ethanol

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efficiency and soil contamination during underground application of insecticides: control of leaf-cutting ants with thermal foggers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The contribution of multiple use forest management to small farmers' annual incomes in the Eastern Amazon

Small-scale farmers in the Brazilian Amazon collectively hold tenure over more than 12 million ha of permanent forest reserves, as required by the Forest Code. The trade-off between forest conservation and other land uses entails opportunity costs for them and for the country, which have not been sufficiently studied. We assessed the potential income generated by multiple use forest management for farmers and compared it to the income potentially derived from six other agricultural land uses. Income from the forest was from (i) logging, carried out by a logging company in partnership with farmers' associations; and (ii) harvesting the seeds of Carapa guianensis (local name andiroba) for the production of oil. We then compared the income generated by multiple-use forest management with the income from different types of agrarian systems. According to our calculations in this study, the mean annual economic benefits from multiple forest use are the same as the least productive agrarian system, but only 25% of the annual income generated by the most productive system. Although the income generated by logging may be considered low when calculated on an annual basis and compared to incomes generated by agriculture, the one-time payment after logging is significant (US$5,800 to US$33,508) and could be used to implement more intensive and productive cropping systems such as planting black pepper. The income from forest management could also be used to establish permanent fields in deforested areas for highly productive annual crops using conservation agriculture techniques. These techniques are alternatives to the traditional land use based on periodic clearing of the forest. Nevertheless, the shift in current practices towards adoption of more sustainable conservation agriculture techniques will also require the technical and legal support of the State to help small farmers apply these alternatives, which aim to integrate forest management in sustainable agricultural production systems.

Investimento materno em anfíbios anuros: a questão da variação no tamanho do ovo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Constrained least square pre-distortion scheme for multiuser ultra-wideband

The study proposes a constrained least square (CLS) pre-distortion scheme for multiple-input single-output (MISO) multiple access ultra-wideband (UWB) systems. In such a scheme, a simple objective function is defined, which can be efficiently solved by a gradient-based algorithm. For the performance evaluation, scenarios CM1 and CM3 of the IEEE 802.15.3a channel model are considered. Results show that the CLS algorithm has a fast convergence and a good trade-off between intersymbol interference (ISI) and multiple access interference (MAI) reduction and signal-to-noise ratio (SNR) preservation, performing better than time-reversal (TR) pre-distortion.

Comparison of multiple-input single-output single-user ultra-wideband systems with pre-distortion

This paper presents a performance analysis of a baseband multiple-input single-output ultra-wideband system over scenarios CM1 and CM3 of the IEEE 802.15.3a channel model, incorporating four different schemes of pre-distortion: time reversal, zero-forcing pre-equaliser, constrained least squares pre-equaliser, and minimum mean square error pre-equaliser. For the third case, a simple solution based on the steepest-descent (gradient) algorithm is adopted and compared with theoretical results. The channel estimations at the transmitter are assumed to be truncated and noisy. Results show that the constrained least squares algorithm has a good trade-off between intersymbol interference reduction and signal-to-noise ratio preservation, providing a performance comparable to the minimum mean square error method but with lower computational complexity. Copyright (C) 2011 John Wiley & Sons, Ltd.

The scent of stress: Pintado catfish differentially respond to chemical cues from stressed conspecifics

We examined whether pintado catfish (Pseudoplatystoma corruscans) can discriminate between scents of non-injured conspecifics stressed by a predator or by confinement and how fish use this information in the trade-off between feeding and predator avoidance. In the confinement stress condition, fish ingested the food, whereas in the predator stress condition, fish did not eat. This finding and comparisons of the latency to food ingestion and the time spent swimming between the confinement and predator-stress conditions indicated that pintado catfish can discriminate between conspecifics stressed by a predator or confinement using chemical cues, and use this information for adjusting the trade-off between food intake and predator avoidance.

Learning for well being : Studies using the International Adult Literacy Survey

This thesis is a collection of five independent but closely related studies. The overall purpose is to approach the analysis of learning outcomes from a perspective that combines three major elements, namely lifelonglifewide learning, human capital, and the benefits of learning. The approach is based on an interdisciplinary perspective of the human capital paradigm. It considers the multiple learning contexts that are responsible for the development of embodied potential – including formal, nonformal and informal learning – and the multiple outcomes – including knowledge, skills, economic, social and others– that result from learning. The studies also seek to examine the extent and relative influence of learning in different contexts on the formation of embodied potential and how in turn that affects economic and social well being. The first study combines the three major elements, lifelonglifewide learning, human capital, and the benefits of learning into one common conceptual framework. This study forms a common basis for the four empirical studies that follow. All four empirical studies use data from the International Adult Literacy Survey (IALS) to investigate the relationships among the major elements of the conceptual framework presented in the first study. Study I. A conceptual framework for the analysis of learning outcomes This study brings together some key concepts and theories that are relevant for the analysis of learning outcomes. Many of the concepts and theories have emerged from varied disciplines including economics, educational psychology, cognitive science and sociology, to name only a few. Accordingly, some of the research questions inherent in the framework relate to different disciplinary perspectives. The primary purpose is to create a common basis for formulating and testing hypotheses as well as to interpret the findings in the empirical studies that follow. In particular, the framework facilitates the process of theorizing and hypothesizing on the relationships and processes concerning lifelong learning as well as their antecedents and consequences. Study II. Determinants of literacy proficiency: A lifelong-lifewide learning perspective This study investigates lifelong and lifewide processes of skill formation. In particular, it seeks to estimate the substitutability and complementarity effects of learning in multiple settings over the lifespan on literacy skill formation. This is done by investigating the predictive capacity of major determinants of literacy proficiency that are associated with a variety of learning contexts including school, home, work, community and leisure. An identical structural model based on previous research is fitted to the IALS data for 18 countries. The results show that even after accounting for all factors, education remains the most important predictor of literacy proficiency. In all countries, however, the total effect of education is significantly mediated through further learning occurring at work, at home and in the community. Therefore, the job and other literacy related factors complement education in predicting literacy proficiency. This result points to a virtual cycle of lifelong learning, particularly to how educational attainment influences other learning behaviours throughout life. In addition, results show that home background as measured by parents’ education is also a strong predictor of literacy proficiency, but in many countries this occurs only if a favourable home background is complemented with some post-secondary education. Study III. The effect of literacy proficiency on earnings: An aggregated occupational approach using the Canadian IALS data This study uses data from the Canadian Adult Literacy Survey to estimate the earnings return to literacy skills. The approach adapts a labour segmented view of the labour market by aggregating occupations into seven types, enabling the estimation of the variable impact of literacy proficiency on earnings, both within and between different types of occupations. This is done using Hierarchical Linear Modeling (HLM). The method used to construct the aggregated occupational classification is based on analysis that considers the role of cognitive and other skills in relation to the nature of occupational tasks. Substantial premiums are found to be associated with some occupational types even after adjusting for within occupational differences in individual characteristics such as schooling, literacy proficiency, labour force experience and gender. Average years of schooling and average levels of literacy proficiency at the between level account for over two-thirds of the premiums. Within occupations, there are significant returns to schooling but they vary depending on the type of occupations. In contrast, the within occupational return of literacy proficiency is not necessarily significant. The latter depends on the type of occupation. Study IV: Determinants of economic and social outcomes from a lifewide learning perspective in Canada In this study the relationship between learning in different contexts, which span the lifewide learning dimension, and individual earnings on the one hand and community participation on the other are examined in separate but comparable models. Data from the Canadian Adult Literacy Survey are used to estimate structural models, which correspond closely to the common conceptual framework outlined in Study I. The findings suggest that the relationship between formal education and economic and social outcomes is complex with confounding effects. The results indicate that learning occurring in different contexts and for different reasons leads to different kinds of benefits. The latter finding suggests a potential trade-off between realizing economic and social benefits through learning that are taken for either job-related or personal-interest related reasons. Study V: The effects of learning on economic and social well being: A comparative analysis Using the same structural model as in Study IV, hypotheses are comparatively examined using the International Adult Literacy Survey data for Canada, Denmark, the Netherlands, Norway, the United Kingdom, and the United States. The main finding from Study IV is confirmed for an additional five countries, namely that the effect of initial schooling on well being is more complex than a direct one and it is significantly mediated by subsequent learning. Additionally, findings suggest that people who devote more time to learning for job-related reasons than learning for personal-interest related reasons experience higher levels of economic well being. Moreover, devoting too much time to learning for personal-interest related reasons has a negative effect on earnings except in Denmark. But the more time people devote to learning for personal-interest related reasons tends to contribute to higher levels of social well being. These results again suggest a trade-off in learning for different reasons and in different contexts.