Occurrence of Ancylostoma in dogs, cats and public places from Andradina city, São Paulo state, Brazil

The aim of this study was to determine the frequency and intensity of Ancylostoma spp. in 33 dogs and 52 cats by means of coproparasitological examinations and parasitological necropsy, and assess the presence of contaminated feces with eggs of that parasite in public places of Andradina Municipality, São Paulo State, Brazil. Willis-Mollay and Sedimentation methods indicated Ancylostoma spp. eggs in 87.8% (29/33) dogs and 94.2% (49/52) cats. The species A. caninum and A. braziliense were found in 63.6% (21/33) and 30.3% (10/33) of dogs, respectively. Considering cats, 67.3% (35/52) were parasitized by A. braziliense, 21.1% (11/52) by A. caninum, and 9.6% (5/52) by A. tubaeforme. Forty-two canine fecal samples were collected from public environments, including 23 squares/gardens and 19 streets/sidewalks. Positive samples for Ancylostoma spp. accounted for 64.3% (27/42); squares/gardens had 60.9% (14/23) positive samples, and streets and sidewalks, 68.4% (13/19). No association was observed between the number of Ancylostoma spp parasites and age, sex and breed of the animals and also the ratio of EPG counts and the parasitic intensity observed at necropsy (p > 0.05). Based on the high occurrence of hookworm in dogs and cats in this study, the treatment with anti helminthics are needed even in those animals with negative stool tests, besides adopting control of the number of animals in public places, in order to decrease the likelihood of environmental contamination, since this parasite represents a potential hazard to human and animal health.

FIRST REPORT ON Cryptococcus neoformans IN PIGEON EXCRETA FROM PUBLIC AND RESIDENTIAL LOCATIONS IN THE METROPOLITAN AREA OF CUIABÁ, STATE OF MATO GROSSO, BRAZIL

SUMMARYCryptococcosis is a severe systemic mycosis caused by two species of Cryptococcus that affect humans and animals: C. neoformans and C. gattii. Cosmopolitan and emergent, the mycosis results from the interaction between a susceptible host and the environment. The occurrence of C. neoformanswas evaluated in 122 samples of dried pigeon excreta collected in 49 locations in the City of Cuiabá, State of Mato Grosso, Brazil, including public squares (n = 5), churches (n = 4), educational institutions (n = 3), health units (n = 8), open areas covered with asbestos (n = 4), residences (n = 23), factory (n = 1) and a prison (n = 1). Samples collected from July to December of 2010 were seeded on Niger seed agar (NSA). Dark brown colonies were identified by urease test, carbon source assimilation tests and canavanine-glycine-bromothymol blue medium. Polymerase chain reaction primer pairs specific for C. neoformans were also used for identification. Cryptococcus neoformans associated to pigeon excreta was isolated from eight (6.6%) samples corresponding to six (12.2%) locations.Cryptococcus neoformans was isolated from urban areas, predominantly in residences, constituting a risk of acquiring the disease by immunocompromised and immunocompetent individuals.

DISTRIBUTION OF DERMATOPHYTES FROM SOILS OF URBAN AND RURAL AREAS OF CITIES OF PARAIBA STATE, BRAZIL

SUMMARYThe dermatophytes, keratinophilic fungi, represent important microorganisms of the soil microbiota, where there are cosmopolitan species and others with restricted geographic distribution. The aim of this study was to broaden the knowledge about the presence of dermatophytes in soils of urban (empty lots, schools, slums, squares, beaches and homes) and rural areas and about the evolution of their prevalence in soils of varying pH in cities of the four mesoregions of Paraiba State, Brazil. Soil samples were collected from 31 cities of Paraiba State. Of 212 samples, 62% showed fungal growth, particularly those from the Mata Paraibana mesoregion (43.5%), which has a tropical climate, hot and humid. Soil pH varied from 4.65 to 9.06, with 71% of the growth of dermatophytes occurring at alkaline pH (7.02 - 9.06) (ρ = 0.000). Of 131 strains isolated, 57.3% were geophilic species, particularly Trichophyton terrestre(31.3%) and Mycrosporum gypseum(21.4%). M. nanum and T. ajelloi were isolated for the first time in Paraiba State. The zoophilic species identified were T. mentagrophytes var.mentagrophytes (31.3 %) and T. verrucosum (7.6 %), and T. tonsurans was isolated as an anthropophilic species. The soils of urban areas including empty lots, schools, slums and squares of cities in the mesoregions of Paraiba State were found to be the most suitable reservoirs for almost all dermatophytes; their growth may have been influenced by environmental factors, soils with residues of human and/or animal keratin and alkaline pH.

Investigating the use of dasymetric techniques for assessing employment containment in Melbourne, Australia

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Methacholine Dose-Response Slopes from Maximal Bronchial Challenge Tests in Asthmatic Children: Methodological Aspects

To determine whether the slope of a maximal bronchial challenge test (in which FEV1 falls by over 50%) could be extrapolated from a standard bronchial challenge test (in which FEV1 falls up to 20%), 14 asthmatic children performed a single maximal bronchial challenge test with methacholin(dose range: 0.097–30.08 umol) by the dosimeter method. Maximal dose-response curves were included according to the following criteria: (1) at least one more dose beyond a FEV1 ù 20%; and (2) a MFEV1 ù 50%. PD20 FEV1 was calculated, and the slopes of the early part of the dose-response curve (standard dose-response slopes) and of the entire curve (maximal dose-response slopes) were calculated by two methods: the two-point slope (DRR) and the least squares method (LSS) in % FEV1 × umol−1. Maximal dose-response slopes were compared with the corresponding standard dose-response slopes by a paired Student’s t test after logarithmic transformation of the data; the goodness of fit of the LSS was also determined. Maximal dose-response slopes were significantly different (p < 0.0001) from those calculated on the early part of the curve: DRR20% (91.2 ± 2.7 FEV1% z umol−1)was 2.88 times higher than DRR50% (31.6 ± 3.4 DFEV1% z umol−1), and the LSS20% (89.1 ± 2.8% FEV1 z umol−1) was 3.10 times higher than LSS 50% (28.8 ± 1.5%FEV1 z umol−1). The goodness of fit of LSS 50% was significant in all cases, whereas LSS 20% failed to be significant in one. These results suggest that maximal dose-response slopes cannot be predicted from the data of standard bronchial challenge tests.

Factorization of elliptic boundary value problems by invariant embedding and application to overdetermined problems

Dissertação para obtenção do Grau de Doutor em Matemática

Determinantes da satisfação dos estudantes de primeiro ciclo de estudos na Universidade Nova de Lisboa

Trabalho de Projeto apresentado como requisito parcial para obtenção do grau de Mestre em Estatística e Gestão de Informação

Three essays on the term structure of interest rates

A PhD Dissertation, presented as part of the requirements for the Degree of Doctor of Philosophy from the NOVA - School of Business and Economics

Humor impresso: cultura e política em O Espreitador do Mundo Novo

The aim of this paper is to identify, analyse and question the expressions of humour in O Espreitador do Mundo Novo, a monthly periodical published by José Daniel Rodrigues da Costa throughout 1802. It is a chapter of a PhD thesis in History and Theory of Ideas with the title “Correcting by laughter. Humour in Portuguese periodical press 1797-1834”. Positing humour as a social and cultural phenomenon, it is regarded here in a broad sense, comprehending wit, joke, ridicule, satire, jest, mockery, facetiousness or irony, displayed with recourse to various figures of speech. This interdisciplinary work intends listing and researching the themes and issues of the periodical and its targets, namely the social, age or gender stereotypes and to acknowledge its political stances. Another main purpose of this paper is to assess the role of humour as expressed in the printed periodical as a political and social weapon, criticizing ways (and which ways) and/or fashions, often ridiculing novelty just for being new in order to maintain the statu quo, and to establish in which senses humour was used in the context of late Ancien Régime and early liberalism culture. The humour of O Espreitador has also played a part in framing a public sphere in early nineteenth-century Portugal, as can be seen by the different “stages” and backgrounds where the monthly installments of the periodical take place: squares, coffee houses, fairgrounds, private houses, jailhouses, churches, public promenades, pilgrimages, bullfights, parties, the opera house – each of them a space of sociability and socialization. In this one, as in other periodicals of the time, printed humour stands at the crossroads of politics and culture, in spaces boldly widening before the reader. Albeit, there are quite a few loud silences in O Espreitador: not even the slightest remark to the church, the clergy or the Inquisition, only reverential references to the established order and the powers that be. The periodical criticizes the criticizers; it is against those who are against. The repeated disclaimers are intended not only to protect the author from libel suits or other litigation. They belong to a centuries-old tradition which, as early as the Middle Ages, has set apart escárnio (scorn) from maldizer (slander): José Daniel Rodrigues da Costa distinguishes satire from rebuking vice – a “cheerful criticism” forerunner of the ironic humour which was to become a trademark of Portuguese literature in the second half of the nineteenth century. Targeting those who deviate from the social norm (for example social climbers and older women who marry young men) or the followers of fashion (sometimes specifically “French fashion”), O Espreitador charges at liberal and progressive ideas. It ridicules the ways of the “New World” in order to perpetuate an idealized version of the “Old World”. Notwithstanding two exceptions – it condemns racism and bullfighting –, the humour of O Espreitador is conservative and conformist from a social and political standpoint.

Desenvolvimento de métodos de espetroscopia NIR. Quantificação de grupos hidróxilo em polímeros

O objetivo deste estudo é o desenvolvimento e validação de métodos espectroscópicos (espectroscopia NIR) que possam vir a substituir os métodos químicos convencionais, para quantificação de grupos hidróxilo em resinas alquídicas. As resinas alquídicas estudadas neste trabalho são normalmente utilizadas em sistemas de revestimento de dois componentes, em que os seus grupos hidróxilo reagem com pré-polímeros de isocianato para formar revestimentos de alta dureza. Por este motivo e por questões processuais ligadas à estequiometria da reação existente na aplicação referida, é extremamente importante a quantificação destes grupos. O método mais comum de quantificação de grupos hidróxilo é conhecido como método de titulação. Este é um método demorado, pois cada medição implica um procedimento experimental de cerca de duas horas, para além de ser muito dispendioso, a nível económico. Foram estudadas as influências da temperatura, heterogeneidade e nível de enchimento da célula na recolha do espectro. As conclusões dos estudos mencionados levaram à fixação de um tempo ideal de permanência da célula dentro da câmara do espectrofotómetro antes da medição do espectro. Para além disto, conclui-se que para lotes standard, a heterogeneidade não é uma variável significativa. O nível da célula deve ser mantido constante. Os métodos desenvolvidos, baseados na norma de qualidade ISO 15063:2011, foram construídos a partir de algoritmos de Partial Least Squares Regression (PLS), utilizando um equipamento NIRVIS, Büchi©. Foram obtidos bons coeficientes de regressão linear para a Resina A (R2>0,9). Quanto aos restantes resultados, estes indicam a possibilidade de aplicação em resinas do mesmo tipo. Este método proporciona resultados 8 vezes mais rápidos e com custos em material que representam 1% do método standard.

Desenvolvimento de métodos de espetroscopia NIR. Quantificação de grupos hidróxilo em polímeros

O objetivo deste estudo é o desenvolvimento e validação de métodos espectroscópicos (espectroscopia NIR) que possam vir a substituir os métodos químicos convencionais, para quantificação de grupos hidróxilo em resinas alquídicas. As resinas alquídicas estudadas neste trabalho são normalmente utilizadas em sistemas de revestimento de dois componentes, em que os seus grupos hidróxilo reagem com pré-polímeros de isocianato para formar revestimentos de alta dureza. Por este motivo e por questões processuais ligadas à estequiometria da reação existente na aplicação referida, é extremamente importante a quantificação destes grupos. O método mais comum de quantificação de grupos hidróxilo é conhecido como método de titulação. Este é um método demorado, pois cada medição implica um procedimento experimental de cerca de duas horas, para além de ser muito dispendioso, a nível económico. Foram estudadas as influências da temperatura, heterogeneidade e nível de enchimento da célula na recolha do espectro. As conclusões dos estudos mencionados levaram à fixação de um tempo ideal de permanência da célula dentro da câmara do espectrofotómetro antes da medição do espectro. Para além disto, conclui-se que para lotes standard, a heterogeneidade não é uma variável significativa. O nível da célula deve ser mantido constante. Os métodos desenvolvidos, baseados na norma de qualidade ISO 15063:2011, foram construídos a partir de algoritmos de Partial Least Squares Regression (PLS), utilizando um equipamento NIRVIS, Büchi©. Foram obtidos bons coeficientes de regressão linear para a Resina A (R2>0,9). Quanto aos restantes resultados, estes indicam a possibilidade de aplicação em resinas do mesmo tipo. Este método proporciona resultados 8 vezes mais rápidos e com custos em material que representam 1% do método standard.

Context-based identification of energy consumption in industrial plants

Nowadays, reducing energy consumption is one of the highest priorities and biggest challenges faced worldwide and in particular in the industrial sector. Given the increasing trend of consumption and the current economical crisis, identifying cost reductions on the most energy-intensive sectors has become one of the main concerns among companies and researchers. Particularly in industrial environments, energy consumption is affected by several factors, namely production factors(e.g. equipments), human (e.g. operators experience), environmental (e.g. temperature), among others, which influence the way of how energy is used across the plant. Therefore, several approaches for identifying consumption causes have been suggested and discussed. However, the existing methods only provide guidelines for energy consumption and have shown difficulties in explaining certain energy consumption patterns due to the lack of structure to incorporate context influence, hence are not able to track down the causes of consumption to a process level, where optimization measures can actually take place. This dissertation proposes a new approach to tackle this issue, by on-line estimation of context-based energy consumption models, which are able to map operating context to consumption patterns. Context identification is performed by regression tree algorithms. Energy consumption estimation is achieved by means of a multi-model architecture using multiple RLS algorithms, locally estimated for each operating context. Lastly, the proposed approach is applied to a real cement plant grinding circuit. Experimental results prove the viability of the overall system, regarding both automatic context identification and energy consumption estimation.

The use of analytical hierarchy process in spatial decision support system for land use management

Geographic information systems give us the possibility to analyze, produce, and edit geographic information. Furthermore, these systems fall short on the analysis and support of complex spatial problems. Therefore, when a spatial problem, like land use management, requires a multi-criteria perspective, multi-criteria decision analysis is placed into spatial decision support systems. The analytic hierarchy process is one of many multi-criteria decision analysis methods that can be used to support these complex problems. Using its capabilities we try to develop a spatial decision support system, to help land use management. Land use management can undertake a broad spectrum of spatial decision problems. The developed decision support system had to accept as input, various formats and types of data, raster or vector format, and the vector could be polygon line or point type. The support system was designed to perform its analysis for the Zambezi river Valley in Mozambique, the study area. The possible solutions for the emerging problems had to cover the entire region. This required the system to process large sets of data, and constantly adjust to new problems’ needs. The developed decision support system, is able to process thousands of alternatives using the analytical hierarchy process, and produce an output suitability map for the problems faced.

Mobile image processing to support educational geometry games

The mobile IT era is here, it is still growing and expanding at a steady rate and, most of all, it is entertaining. Mobile devices are used for entertainment, whether social through the so-called social networks, or private through web browsing, video watching or gaming. Youngsters make heavy use of these devices, and even small children show impressive adaptability and skill. However not much attention is directed towards education, especially in the case of young children. Too much time is usually spent in games which only purpose is to keep children entertained, time that could be put to better use such as developing elementary geometric notions. Taking advantage of this pocket computer scenario, it is proposed an application geared towards small children in the 6 – 9 age group that allows them to consolidate knowledge regarding geometric shapes, forming a stepping stone that leads to some fundamental mathematical knowledge to be exercised later on. To achieve this goal, the application will detect simple geometric shapes like squares, circles and triangles using the device’s camera. The novelty of this application will be a core real-time detection system designed and developed from the ground up for mobile devices, taking into account their characteristic limitations such as reduced processing power, memory and battery. User feedback was be gathered, aggregated and studied to assess the educational factor of the application.

Development of process control strategies exploiting knowledge from systems biology: application to MDCK suspension cells

Madine Darby Canine Kidney (MDCK) cell lines have been extensively evaluated for their potential as host cells for influenza vaccine production. Recent studies allowed the cultivation of these cells in a fully defined medium and in suspension. However, reaching high cell densities in animal cell cultures still remains a challenge. To address this shortcoming, a combined methodology allied with knowledge from systems biology was reported to study the impact of the cell environment on the flux distribution. An optimization of the medium composition was proposed for both a batch and a continuous system in order to reach higher cell densities. To obtain insight into the metabolic activity of these cells, a detailed metabolic model previously developed by Wahl A. et. al was used. The experimental data of four cultivations of MDCK suspension cells, grown under different conditions and used in this work came from the Max Planck Institute, Magdeburg, Germany. Classical metabolic flux analysis (MFA) was used to estimate the intracellular flux distribution of each cultivation and then combined with partial least squares (PLS) method to establish a link between the estimated metabolic state and the cell environment. The validation of the MFA model was made and its consistency checked. The resulted PLS model explained almost 70% of the variance present in the flux distribution. The medium optimization for the continuous system and for the batch system resulted in higher biomass growth rates than the ones obtained experimentally, 0.034 h-1 and 0.030 h-1, respectively, thus reducing in almost 10 hours the duplication time. Additionally, the optimal medium obtained for the continuous system almost did not consider pyruvate. Overall the proposed methodology seems to be effective and both proposed medium optimizations seem to be promising to reach high cell densities.