Computed wall stress may predict the growth of abdominal aortic aneurysm

Growth rate of abdominal aortic aneurysm (AAA) is thought to be an important indicator of the potential risk of rupture. Wall stress is also thought to be a trigger for its rupture. However, stress change during the expansion of an AAA is unclear. Forty-four patients with AAAs were included in this longitudinal follow-up study. They were assessed by serial abdominal ultrasonography and computerized tomography (CT) scans if a critical size was reached or a rapid expansion occurred. Patient-specific 3-dimensional AAA geometries were reconstructed from the follow-up CT images. Structural analysis was performed to calculate the wall stresses of the AAA models at both baseline and final visit. A non-linear large-strain finite element method was used to compute the wall stress distribution. The average growth rate was 0.66cm/year (range 0-1.32 cm/year). A significantly positive correlation between shoulder tress at baseline and growth rate was found (r=0.342; p=0.02). A higher shoulder stress is associated with a rapidly expanding AAA. Therefore, it may be useful for estimating the growth expansion of AAAs and further risk stratification of patients with AAAs.

Impact of calcification and intraluminal thrombus on the computed wall stresses of abdominal aortic aneurysm

Background: Increased biomechanical stresses within the abdominal aortic aneurysm (AAA) wall contribute to its rupture. Calcification and intraluminal thrombus can be commonly found in AAAs, but the relationship between calcification/intraluminal thrombus and AAA wall stress is not completely described. Methods: Patient-specific three-dimensional AAA geometries were reconstructed from computed tomographic images of 20 patients. Structural analysis was performed to calculate the wall stresses of the 20 AAA models and their altered models when calcification or intraluminal thrombus was not considered. A nonlinear large-strain finite element method was used to compute the wall stress distribution. The relationships between wall stresses and volumes of calcification and intraluminal thrombus were sought. Results: Maximum stress was not correlated with the percentage of calcification, and was negatively correlated with the percentage of intraluminal thrombus (r = -0.56; P = .011). Exclusion of calcification from analysis led to a significant decrease in maximum stress by a median of 14% (range, 2%-27%; P < .01). When intraluminal thrombus was eliminated, maximum stress increased significantly by a median of 24% (range, 5%-43%; P < .01). Conclusion: The presence of calcification increases AAA peak wall stress, suggesting that calcification decrease the biomechanical stability of AAA. In contrast, intraluminal thrombus reduces the maximum stress in AAA. Calcification and intraluminal thrombus should both be considered in the evaluation of wall stress for risk assessment of AAA rupture.

Does calcium deposition play a role in the stability of atheroma? Location may be the key

Background: Rupture of vulnerable atheromatous plaque in the carotid and coronary arteries often leads to stroke and heart attack respectively. The role of calcium deposition and its contribution to plaque stability is controversial. This study uses both an idealized and a patient-specific model to evaluate the effect of a calcium deposit on the stress distribution within an atheromatous plaque. Methods: Using a finite-element method, structural analysis was performed on an idealized plaque model and the location of a calcium deposit within it was varied. In addition to the idealized model, in vivo high-resolution MR imaging was performed on 3 patients with carotid atheroma and stress distributions were generated. The individual plaques were chosen as they had calcium at varying locations with respect to the lumen and the fibrous cap. Results: The predicted maximum stress was increased by 47.5% when the calcium deposit was located in the thin fibrous cap in the model when compared with that in a model without a deposit. The result of adding a calcium deposit either to the lipid core or remote from the lumen resulted in almost no increase in maximal stress. Conclusion: Calcification at the thin fibrous cap may result in high stress concentrations, ultimately increasing the risk of plaque rupture. Assessing the location of calcification may, in the future, aid in the risk stratification of patients with carotid stenosis.

Interaction Between Two Residues in the Inter-Domain Interface of Escherichia coli Peptidase N Modulates Catalytic Activity

The role of interaction between Asn259 (catalytic domain) with Gln821 (C-terminal domain) in PeptidaseN was investigated. The k(cat) of PeptidaseN containing Asn259Asp or Gln821Glu is enhanced whereas it is suppressed in Asn259AspGln821Glu. Structural analysis shows this interaction to change the relative disposition of active site residues, which modulates catalytic activity.

Kansallisvaltion teräsmiehestä valtakunnan sovittelijaksi : Poliisikulttuurin psykohistorialliset solmukohdat 1930-1997

From Steely Nation-State Superman to Conciliator of Economical Global Empire – A Psychohistory of Finnish Police Culture 1930-1997 My study concerns the way police culture has changed within the societal changes in Finnish society between 1930 and 1997. The method of my study was psycho-historical and post-structural analysis. The research was conducted by examining the psycho-historical plateaus traceable within Finnish police culture. I made a social diagnosis of the autopoietic relationship between the power-holders of Finnish society and the police (at various levels of hierarchical organization). According to police researcher John P. Crank, police culture should be understood as the cognitive processes behind the actions of the police. Among these processes are the values, beliefs, rituals, customs and advice which standardize their work and the common sense of policemen. According to Crank, police culture is defined by a mindset which thinks, judges and acts according to its evaluations filtered by its own preliminary comprehension. Police culture consists of all the unsaid assumptions of being a policeman, the organizational structures of police, official policies, unofficial ways of behaviour, forms of arrest, procedures of practice and different kinds of training habits, attitudes towards suspects and citizens, and also possible corruption. Police culture channels its members’ feelings and emotions. Crank says that police culture can be seen in how policemen express their feelings. He advises police researchers to ask themselves how it feels to be a member of the police. Ethos has been described as a communal frame for thought that guides one’s actions. According to sociologist Martti Grönfors, the Finnish mentality of the Protestant ethic is accentuated among Finnish policemen. The concept of ethos expresses very well the self-made mentality as an ethical tension which prevails in police work between communal belonging and individual freedom of choice. However, it is significant that it is a matter of the quality of relationships, and that the relationship is always tied to the context of the cultural history of dealing with one’s anxiety. According to criminologist Clifford Shearing, the values of police culture act as subterranean processes of the maintenance of social power in society. Policemen have been called microcosmic mediators, or street corner politicians. Robert Reiner argues that at the level of self-comprehension, policemen disparage the dimension of politics in their work. Reiner points out that all relationships which hold a dimension of power are political. Police culture has also been called a canteen culture. This idea expresses the day-to-day basis of the mentality of taking care of business which policing produces as a necessity for dealing with everyday hardships. According to police researcher Timo Korander, this figurative expression embodies the nature of police culture as a crew culture which is partly hidden from police chiefs who are at a different level. This multitude of standpoints depicts the diversity of police cultures. According to Reiner, one should not see police culture as one monolithic whole; instead one should assess it as the interplay of individuals negotiating with their environment and societal power networks. The cases analyzed formed different plateaus of study. The first plateau was the so-called ‘Rovaniemi arson’ case in the summer of 1930. The second plateau consisted of the examinations of alleged police assaults towards the Communists during the Finnish Continuation War of 1941 to 1944 and the threats that societal change after the war posed to Finnish Society. The third plateau was thematic. Here I investigated how using force towards police clients has changed culturally from the 1930s to the 1980s. The fourth plateau concerned with the material produced by the Security Police detectives traced the interaction between Soviet KGB agents and Finnish politicians during the long 1970s. The fifth plateau of larger changes in Finnish police culture then occurred during the 1980s as an aftermath of the former decade. The last, sixth plateau of changing relationships between policing and the national logic of action can be seen in the murder of two policemen in the autumn of 1997. My study shows that police culture has transformed from a “stone cold” steely fixed identity towards a more relational identity that tries to solve problems by negotiating with clients instead of using excessive force. However, in this process of change there is a traceable paradox in Finnish policing and police culture. On the one hand, policemen have, at the practical level, constructed their policing identity by protecting their inner self in their organizational role at work against the projections of anger and fear in society. On the other hand, however, they have had to safeguard themselves at the emotional level against the predominance of this same organizational role. Because of this dilemma they must simultaneously construct both a distance from their own role as police officers and the role of the police itself. This makes the task of policing susceptible to the political pressures of society. In an era of globalization, and after the heyday of the welfare state, this can produce heightened challenges for Finnish police culture.

From a "Student" to a Lifelong "Consumer" : Constructions of Educability in Adult Students' Narrative Life Histories

The focus of this study was to examine the constructions of the educable subject of the lifelong learning (LLL) narrative in the narrative life histories of adult students at general upper secondary school for adults (GUSSA). In this study lifelong learning has been defined as a cultural narrative on education, “a system of political thinking” that is not internally consistent, but has contradictory themes embedded within it (Billig et al., 1988). As earlier research has shown and this study also confirms, the LLL narrative creates differences between those who are included and those who fall behind and are excluded from the learning society ideal. Educability expresses socially constructed interpretations on who benefit from education and who should be educated and how. The presupposition in this study has been that contradictions between the LLL narrative and the so-called traditional constructions of educability are likely to be constructed as the former relies on the all-inclusive interpretation of educability and the latter on the meritocratic model of educating individuals based on their innate abilities. The school system continues to uphold the institutionalized ethos of educability that ranks students into the categories “bright”, “mediocre”, and “poor” (Räty & Snellman, 1998) on the basis of their abilities, including gender-related differences as well as differences based on social class. Traditional age-related norms also persist, for example general upper secondary education is normatively completed in youth and not in adulthood, and the formal learning context continues to outweigh both non-formal and informal learning. Moreover, in this study the construction of social differences in relation to educability and, thereafter unequal access to education has been examined in relation to age, social class, and gender. The biographical work of the research participants forms a peephole that permits the examination of the dilemmatic nature of the constructions of educability in this study. Formal general upper secondary education in adulthood is situated on the border between the traditional and the LLL narratives on educability: participation in GUSSA inevitably means that one’s ability and competence as a student and learner becomes reassessed through the assessment criteria maintained by schools, whereas according to the principles of LLL everyone is educable; everyone is encouraged to learn throughout their lives regardless of age, social class, or gender. This study is situated in the field of adult education, sociology of education, and social psychological research on educability, having also been informed by feminist studies. Moreover, this study contributes to narrative life history research combining the structural analysis of narratives (Labov & Waletzky, 1997), i.e. mini-stories within life history, with the analysis of the life histories as structural and thematic wholes and the creation of coherence in them; thus, permitting both micro and macro analyses. On accounting for the discontinuity created by participation in general upper secondary school study in adulthood and not normatively in youth, the GUSSA students construct coherence in relation to their ability and competence as students and learners. The seven case studies illuminate the social differences constructed in relation to educability, i.e. social class, gender, age, and the “new category of student and learner”. In the data of this study, i.e. 20 general upper secondary school adult graduates’ narrative life histories primarily generated through interviews, two main coherence patterns of the adult educable subject emerge. The first performance-oriented pattern displays qualities that are closely related to the principles of LLL. Contrary to the principles of lifewide learning, however, the documentation of one’s competence through formal qualifications outweighs non-formal and informal learning in preparation for future change and the competition for further education, professional careers, and higher social positions. The second flexible learning pattern calls into question the status of formal, especially theoretical and academically oriented education; inner development is seen as more important than such external signs of development — grades and certificates. Studying and learning is constructed as a hobby and as a means to a more satisfactory life as opposed to a socially and culturally valued serious occupation leading to further education and career development. Consequently, as a curious, active, and independent learner, this educable but not readily employable subject is pushed into the periphery of lifelong learning. These two coherence patterns of the adult educable subject illuminate who is to be educated and how. The educable and readily employable LLL subject is to participate in formal education in order to achieve qualifications for working life, whereas the educable but not employable subject may utilize lifewide learning for her/his own pleasure. Key words: adult education, general upper secondary school for adults, educability, lifelong learning, narrative life history

Numerical studies of gypsum plasterboard and MGO board lined LSF walls exposed to fire

Fire resistance of cold-formed light gauge steel frame (LSF) wall systems is enhanced by lining them with single or multiple layers of wall boards with varying thermal properties. These wall boards are gypsum plasterboards or Magnesium Oxide (MgO) boards produced by different manufacturers. Thermal properties of these boards appear to show considerable variations and this can lead to varying fire resistance levels (FRL) for their wall systems. Currently FRLs of wall systems are determined using full scale fire tests, but they are time consuming and expensive. Recent research studies on the fire performance of LSF wall systems have used finite element studies to overcome this problem, but they were developed based on 1-D and 2-D finite element platform capable of performing either heat transfer or structural analysis separately. Hence in this research a 3-D finite element model was developed first for LSF walls lined with gypsum plasterboard and cavity insulation materials. Accurate thermal properties of these boards are essential for finite element modelling, and thus they were measured at both ambient and elevated temperatures. This experimental study included specific heat, relative density and thermal conductivity of boards. The developed 3-D finite element model was then validated using the available fire tests results of LSF walls lined with gypsum plasterboard, and is being used to investigate the fire performance of different LSF wall configurations. The tested MgO board exhibited significant variations in their thermal properties in comparison to gypsum plasterboards with about 50% loss of its initial mass at about 500 ºC compared to 16% for gypsum plasterboards. Hence the FRL of MgO board lined LSF wall systems is likely to be significantly reduced. This paper presents the details of this research study on the fire performance of LSF wall systems lined with gypsum plasterboard and MgO board including the developed 3-D finite element models, thermal property tests and the results.

Molecular Interactions Chlorin Assemblies and NMR Separations

Photosynthesis is a chemical process in which the energy of the light quanta is transformed into chemical energy. Chlorophyll (Chl) molecules play a key role in photosynthesis; they function in the antennae systems and in the photosynthetic reaction center where the primary charge separation (CS) takes place. Bio-inspired mimicry of the CS is an essential unit in dye-sensitized solar cells. Aim of this study was to design and develop electron donor-acceptor (EDA) pairs from Chls and fullerenes (C60) or carbon nanotubes (CNT). The supramolecular approach was chosen, as long synthetic sequences required by the covalent approach lead to long reaction schemes and low yields. Here, a π-interaction between soluble CNTs and Chl was used in EDA construction. Also, a beta-face selective two-point bound Chl-C60 EDA was introduced. In addition, the photophysical properties of the supramolecular EDA dyads were analyzed. In organic chemistry, nuclear magnetic resonance (NMR) spectroscopy is the most vital analytical technique in use. Multi-dimensional NMR experiments have enabled a structural analysis of complex natural products and proteins. However, in mixture analysis NMR is still facing difficulties. In many cases overlapping signals can t be resolved even with the help of multi-dimensional experiments. In this work, an NMR tool based on simple host-guest chemistry between analytes and macromolecules was developed. Diffusion ordered NMR spectroscopy (DOSY) measures the mobilities of compounds in an NMR sample. In a liquid state NMR sample, each of the analytes has a characteristic diffusion coefficient, which is proportional to the size of the analyte. With normal DOSY experiment, provided that the diffusion coefficients of the analytes differ enough, individual spectra of analytes can be extracted. When similar sized analytes differ chemically, an additive can be introduced into the sample. Since macromolecules in a liquid state NMR sample can be considered practically stationary, even faint supramolecular interaction can change the diffusion coefficient of the analyte sufficiently for a successful resolution in DOSY. In this thesis, polyvinylpyrrolidone and polyethyleneglycol enhanced DOSY NMR techniques, which enable mixture analysis of similar in size but chemically differing natural products, are introduced.

Gabapentin: A Stereochemically Constrained gamma Amino Acid Residue in Hybrid Peptide Design

Nature has used the all-alpha-polypeptide backbone of proteins to create a remarkable diversity of folded structures. Sequential patterns of 20 distinct amino adds, which differ only in their side chains, determine the shape and form of proteins. Our understanding of these specific secondary structures is over half a century old and is based primarily on the fundamental elements: the Pauling alpha-helix and beta-sheet. Researchers can also generate structural diversity through the synthesis of polypeptide chains containing homologated (omega) amino acid residues, which contain a variable number of backbone atoms. However, incorporating amino adds with more atoms within the backbone introduces additional torsional freedom into the structure, which can complicate the structural analysis. Fortunately, gabapentin (Gpn), a readily available bulk drug, is an achiral beta,beta-disubstituted gamma amino add residue that contains a cyclohexyl ring at the C-beta carbon atom, which dramatically limits the range of torsion angles that can be obtained about the flanking C-C bonds. Limiting conformational flexibility also has the desirable effect of increasing peptide crystallinity, which permits unambiguous structural characterization by X-ray diffraction methods. This Account describes studies carried out in our laboratory that establish Gpn as a valuable residue in the design of specifically folded hybrid peptide structures. The insertion of additional atoms into polypeptide backbones facilitates the formation of intramolecular hydrogen bonds whose directionality is opposite to that observed in canonical alpha-peptide helices. If hybrid structures mimic proteins and biologically active peptides, the proteolytic stability conferred by unusual backbones can be a major advantage in the area of medicinal chemistry. We have demonstrated a variety of internally hydrogen-bonded structures in the solid state for Gpn-containing peptides, including the characterization of the C-7 and C-9 hydrogen bonds, which can lead to ribbons in homo-oligomeric sequences. In hybrid alpha gamma sequences, district C-12 hydrogen-bonded turn structures support formation of peptide helices and hairpins in longer sequences. Some peptides that include the Gpn residue have hydrogen-bond directionality that matches alpha-peptide helices, while others have the opposite directionality. We expect that expansion of the polypeptide backbone will lead to new classes of foldamer structures, which are thus far unknown to the world of alpha-polypeptides. The diversity of internally hydrogen-bonded structures observed in hybrid sequences containing Gpn shows promise for the rational design of novel peptide structures incorporating hybrid backbones.

Prediction of protein-protein interactions between Helicobacter pylori and a human host

A lack of information on protein-protein interactions at the host-pathogen interface is impeding the understanding of the pathogenesis process. A recently developed, homology search-based method to predict protein-protein interactions is applied to the gastric pathogen, Helicobacter pylori to predict the interactions between proteins of H. pylori and human proteins in vitro. Many of the predicted interactions could potentially occur between the pathogen and its human host during pathogenesis as we focused mainly on the H. pylori proteins that have a transmembrane region or are encoded in the pathogenic island and those which are known to be secreted into the human host. By applying the homology search approach to protein-protein interaction databases DIP and iPfam, we could predict in vitro interactions for a total of 623 H. pylori proteins with 6559 human proteins. The predicted interactions include 549 hypothetical proteins of as yet unknown function encoded in the H. pylori genome and 13 experimentally verified secreted proteins. We have recognized 833 interactions involving the extracellular domains of transmembrane proteins of H. pylori. Structural analysis of some of the examples reveals that the interaction predicted by us is consistent with the structural compatibility of binding partners. Examples of interactions with discernible biological relevance are discussed.

A combined extended and helical backbone for Boc-(Ala-Leu-Ac(7)c-)(2)-OMe

The structure of the peptide Boc-Ala-Leu-Ac(7)c-Ala-Leu-Ac(7)c-OMe (Ac(7)c,1-aminocycloheptane-1-carboxylic acid) is described in crystals. The presence of two Ac(7)c residues was expected to stabilize a 3(10)-helical fold. Contrary to expectation the structural analysis revealed an unfolded amino terminus, with Ala(1) adopting an extended beta-conformation (phi = -93degrees,psi = 112degrees). Residues 2-5 form a 3(10)-helix, stabilized by three successive intramolecular hydrogen bonds. Notably, two NH groups Ala(1) and Ac(7)c(3) do not form any hydrogen bonds in the crystal. Peptide assembly appears to be dominated by packing of the cycloheptane rings that stack against one another within the molecule and also throughout the crystal in columns.

Protein sequence design on the basis of topology optimization techniques -Using continuous modeling of discrete amino acid types

The notion of optimization is inherent in protein design. A long linear chain of twenty types of amino acid residues are known to fold to a 3-D conformation that minimizes the combined inter-residue energy interactions. There are two distinct protein design problems, viz. predicting the folded structure from a given sequence of amino acid monomers (folding problem) and determining a sequence for a given folded structure (inverse folding problem). These two problems have much similarity to engineering structural analysis and structural optimization problems respectively. In the folding problem, a protein chain with a given sequence folds to a conformation, called a native state, which has a unique global minimum energy value when compared to all other unfolded conformations. This involves a search in the conformation space. This is somewhat akin to the principle of minimum potential energy that determines the deformed static equilibrium configuration of an elastic structure of given topology, shape, and size that is subjected to certain boundary conditions. In the inverse-folding problem, one has to design a sequence with some objectives (having a specific feature of the folded structure, docking with another protein, etc.) and constraints (sequence being fixed in some portion, a particular composition of amino acid types, etc.) while obtaining a sequence that would fold to the desired conformation satisfying the criteria of folding. This requires a search in the sequence space. This is similar to structural optimization in the design-variable space wherein a certain feature of structural response is optimized subject to some constraints while satisfying the governing static or dynamic equilibrium equations. Based on this similarity, in this work we apply the topology optimization methods to protein design, discuss modeling issues and present some initial results.

Many Faces of Mao Zedong

The main aim of this work was to explore the use of Mao Zedong s (毛泽东, 1893—1976) visual image in contemporary Chinese art during the years 1976—2006. Chairman Mao is the most visually reproduced person in the People's Republic of China (PRC), and the presence of his image is still unquestionable at many levels. Although several scholars have provided insightful observations on this topic, research focusing on Mao's visual image has been neglected. Employing the interdisciplinary approach of visual studies and using image as the main concept, this research combines different theoretical frameworks, deriving from art history, image studies and social sciences, for each chapter in order to explain the origins, intentions and major strategies of the contemporary Chinese artists. The focus of this research was to elucidate how Mao's visual image, deriving from the Maoist era, is re-created and negotiated in contemporary Chinese art works. The material reproductions - the visual images in contemporary art - are created to be juxtaposed with the immaterial mental images of Mao that were created during the Maoist era through the original visual images of Mao. This complex interaction between visual and mental images is further exemplified by art works that do not include Mao's visual image, but still imply his mental image. The methods used derive from both sinology and art history. The research is based on extensive fieldwork in China, which was crucial for gathering new information and materials from this vigorous art scene. The topic is approached through a Chinese cultural, political and historical perspective that is necessary for a further understanding of how the original visual images of Mao obtained their omnipotent status and what kind of iconography was created. Close structural analysis, taking into account the format, style, techniques, composition, colors, materials and space used in the art works, is employed to demonstrate the great variety of visual images created. The analysis is further placed in a continuous dialogue both with the contemporary art works of Mao and with the original visual images of Mao from the past. In this study it is shown that contemporary Chinese art relating to Chairman Mao is a more versatile and multilayered phenomenon than is generally assumed. Although some of the art works seem to fit into the definition of superficial art, the study demonstrates that this reading of the art works is not adequate. The author argues that employing Mao's visual images in contemporary Chinese art is based on three main strategies used by artists: to create a visual dialogue with a traumatizing past, to employ transcontextual parody, and to explore the importance of Tian'anmen through site-dependent art. These strategies are not exclusionary, but instead interdependent and many art works employ more than one of them. In addition, these three main strategies include versatile methods used by artists that make the use of Mao's visual images even more multifaceted.

The physical properties of SnS films grown on lattice-matched and amorphous substrates

The development of high-quality tin monosulphide (SnS) layers is one of the crucial tasks in the fabrication of efficient SnS-based optoelectronic devices. Reduction of strain between film and the substrate by using an appropriate lattice-matched (LM) substrate is a new attempt for the growth of high-quality layers. In this view, the SnS films were deposited on LM Al substrate using the thermal evaporation technique with a low rate of evaporation. The as-grown SnS films were characterized using appropriate techniques and the obtained results are discussed by comparing them with the properties of SnS films grown on amorphous substrate under the same conditions. From structural analysis of the films, it is noticed that the SnS films deposited on amorphous substrate have crystallites that were oriented along different directions. However, the SnS crystallites grown on Al substrate exhibited epitaxial growth along the 101] direction. Photoluminescence (PL) and Raman studies reveal that the films grown on Al substrate have better optical properties than those of the films grown on amorphous substrates. (C) 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Origin of the plateau in the low-temperature thermal conductivity of silica

Thermal conductivities of glasses at low temperatures show strikingly similar behavior irrespective of their chemical composition. While for T<1 K the thermal conductivity can be understood in the phenomenological tunneling model; the ‘‘universal plateau’’ in the temperature interval 15>T>2 K is totally unexplained. While Rayleigh scattering of phonons by structural disorder should be the natural cause for limiting the mean free path of phonons in this temperature range, it has been concluded before that in glasses a strong enough source of such scattering does not exist. In this study we show by a proper structural analysis in at least one material (namely, silica) that a strong enough source of Rayleigh scattering of phonons in glasses does exist so that the ‘‘universal plateau’’ can be explained without invoking any new mechanism. This may be for the first time that the low-temperature property of a structural glass has been correlated to its structure.