Comparative analysis of rating curve and ADP estimates of instantaneous water discharge through estuaries in two contrasting Brazilian rivers

This work quantifies, using ADP and rating curve techniques, the instantaneous outflows at estuarine interfaces: higher to middle estuary and middle to lower estuary, in two medium-sized watersheds (72 000 and 66 000 km(2) of area, respectively), the Jaguaribe and Contas Rivers located in the northeastern (semi-arid) and eastern (tropical humid) Brazilian coasts, respectively. Results from ADP showed that the net water balances show the Contas River as a net water exporter, whereas the Jaguaribe River Estuary is a net water importer. At the Jaguaribe Estuary, water retention during flood tide contributes to 58% of the total volume transferred during the ebb tide from the middle to lower estuary. However, 42% of the total water volume (452 m(3) s(-1)) that entered during flood tide is retained in the middle estuary. In the Contas River, 90% of the total water is retained during the flood tide contributing to the volume transported in the ebb tide from the middle to the lower estuary. Outflows obtained with the rating curve method for the Contas and Jaguaribe Rivers were uniform through time due to river flow normalization by dams in both basins. Estimated outflows with this method are about 65% (Contas) and 95% (Jaguaribe) lower compared to outflows obtained with ADP. This suggests that the outflows obtained with the rating curve method underestimate the net water balance in both systems, particularly in the Jaguaribe River under a semi-arid climate. This underestimation is somewhat decreased due to wetter conditions in the Contas River basin. Copyright. (C) 2011 John Wiley & Sons, Ltd.

Growth curve in Santa Ines sheep

The objective of this research was to use non-linear models to describe the growth pattern in Santa Ines sheep and to study the influence of environmental effects on curve parameters with the best-fit model. The models included the Brody, Richards, Von Bertalanffy, Gompertz, and Logistic models. We used 773 field reports on 162 animals ranging in age from 120 to 774 days, including 46 males and 116 females. The statistics used to evaluate the quality of fit included RMS (residual mean square), C% (percentage of convergence), R-2 (adjusted determination coefficient) and MAD (mean absolute deviation). Of the fixed effects studied, the only significant relationship was the effect of sex on parameter A. The Richards model was problematic during the process of convergence. Considering all studied criteria, the Logistic model presented the best fit in describing the growth pattern in Santa Ines sheep. (C) 2011 Elsevier B.V. All rights reserved.

Fracture and resistance-curve behavior in hybrid natural fiber and polypropylene fiber reinforced composites

This article presents the results of a combined experimental and theoretical study of fracture and resistance-curve behavior of hybrid natural fiber- and synthetic polymer fiber-reinforced composites that are being developed for potential applications in affordable housing. Fracture and resistance-curve behavior are studied using single-edge notched bend specimens. The sisal fibers used were examined using atomic force microscopy for fiber bundle structures. The underlying crack/microstructure interactions and fracture mechanisms are elucidated via in situ optical microscopy and ex-situ environmental scanning microscopy techniques. The observed crack bridging mechanisms are modeled using small and large scale bridging concepts. The implications of the results are then discussed for the design of eco-friendly building materials that are reinforced with natural and polypropylene fibers.

ABSENCE OF STABILIZATION POINT OF THE SPECIES ACCUMULATION CURVE IN TROPICAL FORESTS

The definition of the sample size is a major problem in studies of phytosociology. The species accumulation curve is used to define the sampling sufficiency, but this method presents some limitations such as the absence of a stabilization point that can be objectively determined and the arbitrariness of the order of sampling units in the curve. A solution to this problem is the use of randomization procedures, e. g. permutation, for obtaining a mean species accumulation curve and empiric confidence intervals. However, the randomization process emphasizes the asymptotical character of the curve. Moreover, the inexistence of an inflection point in the curve makes it impossible to define objectively the point of optimum sample size.

Probabilistic Envelope Curves for Extreme Rainfall Events - Curve Inviluppo Probabilistiche per Precipitazioni Estreme

A regional envelope curve (REC) of flood flows summarises the current bound on our experience of extreme floods in a region. RECs are available for most regions of the world. Recent scientific papers introduced a probabilistic interpretation of these curves and formulated an empirical estimator of the recurrence interval T associated with a REC, which, in principle, enables us to use RECs for design purposes in ungauged basins. The main aim of this work is twofold. First, it extends the REC concept to extreme rainstorm events by introducing the Depth-Duration Envelope Curves (DDEC), which are defined as the regional upper bound on all the record rainfall depths at present for various rainfall duration. Second, it adapts the probabilistic interpretation proposed for RECs to DDECs and it assesses the suitability of these curves for estimating the T-year rainfall event associated with a given duration and large T values. Probabilistic DDECs are complementary to regional frequency analysis of rainstorms and their utilization in combination with a suitable rainfall-runoff model can provide useful indications on the magnitude of extreme floods for gauged and ungauged basins. The study focuses on two different national datasets, the peak over threshold (POT) series of rainfall depths with duration 30 min., 1, 3, 9 and 24 hrs. obtained for 700 Austrian raingauges and the Annual Maximum Series (AMS) of rainfall depths with duration spanning from 5 min. to 24 hrs. collected at 220 raingauges located in northern-central Italy. The estimation of the recurrence interval of DDEC requires the quantification of the equivalent number of independent data which, in turn, is a function of the cross-correlation among sequences. While the quantification and modelling of intersite dependence is a straightforward task for AMS series, it may be cumbersome for POT series. This paper proposes a possible approach to address this problem.

Realizzazione di riporti funzionalizzanti su superfici ceramiche per la produzione di energia elettrica mediante effetto fotovoltaico

This research, carried out during the PhD in Materials Engineering, deals with the creation of layers, with different functionality, deposited on a ceramic substrate, to obtain photovoltaic cells for electricity production. The research activities are included in the project PRRIITT, Measure 4 (Development of Networks), Action A (Research and Technology Transfer Laboratories), Thematic reference 3 (Advanced materials applications development), co-financed by the Emilia Romagna Region, for the creation of CECERBENCH laboratory, which aims to develop "Tiles with a functionalised surface”. The innovation lies in the study of materials and in the development of technologies to achieve a "photovoltaic surface", directly in the tiles production process. The goal is to preserve the technical characteristics, and to make available new surfaces, exploiting renewable energy sources. The realization of Building Integrated PhotoVoltaic (BIPV) is nowadays a more and more spread tendency. The aims of the research are essentially linked to the need to diversify the actual ceramic tile production (which is strongly present in the Emilia Romagna Region ), and to provide a higher added value to the tiles. Solar energy production is the primary objective of the functionalization, and has a relevant ecological impact, taking into account the overwhelming global energy demand. The specific activities of the PhD were carried out according to the achievement of scientific and technological objectives of CECERBENCH laboratory, and involved the collaboration in design solutions, to obtain the cells directly on the tiles surface. The author has managed personally a part of the research project. Layers with different features were made: - Electrically conductive layers, directly on the ceramic tiles surface; - Layers to obtain the photovoltaic functionality; - Electrically insulating, protective layers (double function). For each layer, the most suitable materials have been selected. Among the technical application, the screen printing was used. This technique, widely used in ceramics, has many application areas, including the electronics and photovoltaic industries. It is an inexpensive technique, easy to use in industrial production lines. The screen printing technique was therefore studied in depth by theoretical considerations, and through the use of rheological measurements.

La sensitività delle curve a fatica oligociclica rispetto alle colate di derivazione per i provini: applicazione alla caratterizzazione di un materiale per cappe di turboalternatore

In questo studio vengono riportati i risultati di prove di fatica oligociclica eseguiti su provini dello stesso materiale ottenuti con uguali processi tecnologici ma provenienti da differenti colate di metallo. Il materiale in questione è un acciaio di elevata qualità frequentemente utilizzato per la realizzazione di cappe per turboalternatori. Obiettivo dello studio è stato ricavare i coefficienti necessari per tracciare le curve di fatica del materiale, non ancora presenti in letteratura, ed infine indagare la bontà del risultato ottenuto con un’analisi statistica delle curve e dei risultati ottenuti. Nella prima parte è descritto l’attuale stato dell’arte e la situazione in cui si colloca il presente studio. Nella seconda parte viene fornita una descrizione dettagliata del materiale studiato, delle condizioni nelle quali sono state eseguite le prove e delle attrezzature utilizzate a tale scopo. Si conclude esponendo i risultati ottenuti, comprensivi dei confronti e delle considerazioni derivate dalle analisi statistiche eseguite.

Il gruppo dei punti razionali sulle curve ellittiche

Il primo capitolo espone nozioni generali sulle varietà e sulle curve algebriche, sulle mappe fra di esse e su alcune proprietà geometriche importanti per caratterizzare le curve ellittiche. Il secondo capitolo propone un'introduzione allo studio geometrico e algebrico di tali curve. Il terzo e il quarto capitolo affrontano lo studio dei punti a coordinate razionali, per curve definite prima su campi locali e poi su campi globali: l'insieme di tali punti è un gruppo. Il risultato fondamentale, contenuto nel teorema di Mordell-Weil, è che tale gruppo è finitamente generato. Tutto il quarto capitolo propone i risultati necessari per la dimostrazione di tale affermazione.

Nuove tecniche per l'allevamento massale di Ditteri del genere Coenosia Meigen

The species of the genus Coenosia Meigen are polyphagous predators both in the larval and in the adult stage. In Europe five Coenosia species of the ‘tigrina group’ are naturally present in greenhouses, where they can establish for long periods. As their wide preys range includes important pests of protected crops, as Aleyrodidae, Sciaridae and Agromyzidae, Coenosia species are considered promising potential biological control agents. A method for rearing Coenosia species in vivo was developed for the first time in 1993 in Germany, where C. attenuata, C. strigipes and C. humilis were bred on Bradysia paupera (Diptera Sciaridae), reared on Fusarium spp. cultivated on wood fibre. Although this method was partially simplified afterwards, it is still too complex and expensive for a mass production. This research aimed at simplifying this rearing procedure and making it cheaper, in the perspective of an eventual mass production. Studies on potential preys were conducted, to determine their suitability for C. attenuata larvae and adults and to develop rearing methods. Biology and rearing methods of Bradysia paupera Tuomikoski, Scatella stagnalis Fallén and Drosophila melanogaster Meigen (Diptera: Sciaridae, Ephydridae, Drosophilidae) were compared. B. paupera resulted the most suitable prey for rearing C. attenuata in vivo. The Sciarid fly was effectively reared on damp coconut fibre with fresh Agaricus bisporus (J.E. Lange) Pilát, thus simplifying the existing method. After preliminary trials with different potential preys, attempts to rear C. attenuata in vivo on B. paupera and D. melanogaster were made. The best results were obtained with B. paupera, reared on coconut fibre and A. bisporus, but the method needs further improvement. Trials of in vitro rearing of C. attenuata were also made: as no specific diet for Coenosia species is reported in literature, different potentially suitable media were tested. Among these, a specific diet for Diptera Tachinidae resulted a good starting point for further studies and improvements. The biology of C. attenuata adults captured in greenhouses was also studied, by observing both groups and isolated individuals. Data on lifespan, daily number of preys per adult, daily number of laid eggs and hatching rate were recorded, and the effects of different foods on these parameters were analyzed. The following foods were compared: D. melanogaster adults only, as preys for C. attenuata; D. melanogaster adults and a water-honey solution; the water-honey solution only. Honey resulted an effective food integration for C. attenuata, increasing lifespan and the number of egg laying females. It is possible that in greenhouses Coenosia adults complete the preys diet with nectar and/or honeydew. Moreover, the integration with honey reduced the daily preys consumption. This may allow to prevent cannibalism among Coenosia adults in the rearing conditions, where high population densities are required. A survey of the Coenosia species naturally present in Lombardy greenhouses was conducted. The species C. attenuata, C. strigipes, C. tigrina and C. atra were detected. C. attenuata resulted the most common, recorded in most greenhouses and for consecutive years. Besides, the presence of potential preys, weeds and the crops were recorded in each greenhouse. Nevertheless, it is difficult to determine the relation between these parameters and the presence of Coenosia species.