Agricultural production and greenhouse gas emissions from world regions-The major trends over 40 years

Acknowledgements: We thank Dr. Tamara Ben-Ari and Dr. Jean-Francois Soussana, from INRA in France, for their valuable contributions to the early development stage of this project. We also owe great thanks to Prof. Ib Skovgaard, University of Copenhagen, for giving essential assistance in developing the methods for decomposing emission changes. We also thank the Centre for Regional Change in the Earth System (CRES, www.cres-centre.dk), and the University of Copenhagen for funding the work.

Testing of Interposer-Based 2.5D Integrated Circuits

The unprecedented and relentless growth in the electronics industry is feeding the demand for integrated circuits (ICs) with increasing functionality and performance at minimum cost and power consumption. As predicted by Moore's law, ICs are being aggressively scaled to meet this demand. While the continuous scaling of process technology is reducing gate delays, the performance of ICs is being increasingly dominated by interconnect delays. In an effort to improve submicrometer interconnect performance, to increase packing density, and to reduce chip area and power consumption, the semiconductor industry is focusing on three-dimensional (3D) integration. However, volume production and commercial exploitation of 3D integration are not feasible yet due to significant technical hurdles.

At the present time, interposer-based 2.5D integration is emerging as a precursor to stacked 3D integration. All the dies and the interposer in a 2.5D IC must be adequately tested for product qualification. However, since the structure of 2.5D ICs is different from the traditional 2D ICs, new challenges have emerged: (1) pre-bond interposer testing, (2) lack of test access, (3) limited ability for at-speed testing, (4) high density I/O ports and interconnects, (5) reduced number of test pins, and (6) high power consumption. This research targets the above challenges and effective solutions have been developed to test both dies and the interposer.

The dissertation first introduces the basic concepts of 3D ICs and 2.5D ICs. Prior work on testing of 2.5D ICs is studied. An efficient method is presented to locate defects in a passive interposer before stacking. The proposed test architecture uses e-fuses that can be programmed to connect or disconnect functional paths inside the interposer. The concept of a die footprint is utilized for interconnect testing, and the overall assembly and test flow is described. Moreover, the concept of weighted critical area is defined and utilized to reduce test time. In order to fully determine the location of each e-fuse and the order of functional interconnects in a test path, we also present a test-path design algorithm. The proposed algorithm can generate all test paths for interconnect testing.

In order to test for opens, shorts, and interconnect delay defects in the interposer, a test architecture is proposed that is fully compatible with the IEEE 1149.1 standard and relies on an enhancement of the standard test access port (TAP) controller. To reduce test cost, a test-path design and scheduling technique is also presented that minimizes a composite cost function based on test time and the design-for-test (DfT) overhead in terms of additional through silicon vias (TSVs) and micro-bumps needed for test access. The locations of the dies on the interposer are taken into consideration in order to determine the order of dies in a test path.

To address the scenario of high density of I/O ports and interconnects, an efficient built-in self-test (BIST) technique is presented that targets the dies and the interposer interconnects. The proposed BIST architecture can be enabled by the standard TAP controller in the IEEE 1149.1 standard. The area overhead introduced by this BIST architecture is negligible; it includes two simple BIST controllers, a linear-feedback-shift-register (LFSR), a multiple-input-signature-register (MISR), and some extensions to the boundary-scan cells in the dies on the interposer. With these extensions, all boundary-scan cells can be used for self-configuration and self-diagnosis during interconnect testing. To reduce the overall test cost, a test scheduling and optimization technique under power constraints is described.

In order to accomplish testing with a small number test pins, the dissertation presents two efficient ExTest scheduling strategies that implements interconnect testing between tiles inside an system on chip (SoC) die on the interposer while satisfying the practical constraint that the number of required test pins cannot exceed the number of available pins at the chip level. The tiles in the SoC are divided into groups based on the manner in which they are interconnected. In order to minimize the test time, two optimization solutions are introduced. The first solution minimizes the number of input test pins, and the second solution minimizes the number output test pins. In addition, two subgroup configuration methods are further proposed to generate subgroups inside each test group.

Finally, the dissertation presents a programmable method for shift-clock stagger assignment to reduce power supply noise during SoC die testing in 2.5D ICs. An SoC die in the 2.5D IC is typically composed of several blocks and two neighboring blocks that share the same power rails should not be toggled at the same time during shift. Therefore, the proposed programmable method does not assign the same stagger value to neighboring blocks. The positions of all blocks are first analyzed and the shared boundary length between blocks is then calculated. Based on the position relationships between the blocks, a mathematical model is presented to derive optimal result for small-to-medium sized problems. For larger designs, a heuristic algorithm is proposed and evaluated.

In summary, the dissertation targets important design and optimization problems related to testing of interposer-based 2.5D ICs. The proposed research has led to theoretical insights, experiment results, and a set of test and design-for-test methods to make testing effective and feasible from a cost perspective.

Measuring the Diversity and the Integration of Film Production in Mercosur: A Social Network Analysis

Based on an original and comprehensive database of all feature fiction films produced in Mercosur between 2004 and 2012, the paper analyses whether the Mercosur film industry has evolved towards an integrated and culturally more diverse market. It provides a summary of policy opportunities in terms of integration and diversity, emphasizing the limiter role played by regional policies. It then shows that although the Mercosur film industry remains rather disintegrated, it tends to become more integrated and culturally more diverse. From a methodological point of view, the combination of Social Network Analysis and the Stirling Model opens up interesting research tracks to analyse creative industries in terms of their market integration and their cultural diversity.

Perspectives on gender, migration and transnational work: joint work of social reproduction and care in Southern Europe

This paper presents the "state of the art" and some of the main issues discussed in relation to the topic of transnational migration and reproductive work in southern Europe. We start doing a genealogy of the complex theoretical development leading to the consolidation of the research program, linking consideration of gender with transnational migration and transformation of work and ways of survival, thus making the production aspects as reproductive, in a context of globalization. The analysis of the process of multiscale reconfiguration of social reproduction and care, with particular attention to its present global dimension is presented, pointing to the turning point of this line of research that would have taken place with the beginning of this century, with the rise notions such as "global care chains" (Hochschild, 2001), or "care drain" (Ehrenreich and Hochschild, 2013). Also, the role of this new agency, now composed in many cases women who migrate to other countries or continents, precisely to address these reproductive activities, is recognized. Finally, reference is made to some of the new conceptual and theoretical developments in this area.

Anclaje, dinámicas e impactos territoriales de la cadena global de cítricos dulces en el nordeste argentino

El artículo analiza firmas insertas en circuitos globalizados de exportación de frutas frescas, así como la interfase empresas-territorios. Se focaliza en la producción argentina de cítricos dulces y particularmente en un espacio productivo, y se interesa por cómo se traduce la construcción de los circuitos globales en los espacios y actores locales. Para ello, desarrolla una tipología de empresas e indicadores de anclaje y recurre a una combinación de fuentes cuantitativas y cualitativas, con vistas a desentrañar la “caja negra” del comportamiento empresarial. Se concluye que existen diferentes grados de anclaje territorial y combinaciones variables de fijación y movilidad por parte de las empresas. La adopción de una modalidad de agricultura empresarial multilocalizada, orientada al aprovechamiento de las peculiaridades de los diferentes ambientes locales, conduce a la desarticulación de espacios en función de sus características productivas y de sus diversos contextos sociales e institucionales. De esta forma se promueve la conformación de agentes de características flexibles, transformando su reproducción en contingente.

Evidence for methane production by the marine algae Emiliania huxleyi

Methane (CH4), an important greenhouse gas that affects radiation balance and consequently the earth's climate, still has uncertainties in its sinks and sources. The world's oceans are considered to be a source of CH4 to the atmosphere, although the biogeochemical processes involved in its formation are not fully understood. Several recent studies provided strong evidence of CH4 production in oxic marine and freshwaters, but its source is still a topic of debate. Studies of CH4 dynamics in surface waters of oceans and large lakes have concluded that pelagic CH4 supersaturation cannot be sustained either by lateral inputs from littoral or benthic inputs alone. However, regional and temporal oversaturation of surface waters occurs frequently. This comprises the observation of a CH4 oversaturating state within the surface mixed layer, sometimes also termed the "oceanic methane paradox". In this study we considered marine algae as a possible direct source of CH4. Therefore, the coccolithophore Emiliania huxleyi was grown under controlled laboratory conditions and supplemented with two 13C-labeled carbon substrates, namely bicarbonate and a position-specific 13C-labeled methionine (R-S-13CH3). The CH4 production was 0.7 µg particular organic carbon (POC) g−1 d−1, or 30 ng g−1 POC h−1. After supplementation of the cultures with the 13C-labeled substrate, the isotope label was observed in headspace CH4. Moreover, the absence of methanogenic archaea within the algal culture and the oxic conditions during CH4 formation suggest that the widespread marine algae Emiliania huxleyi might contribute to the observed spatially and temporally restricted CH4 oversaturation in ocean surface waters.

Evidence for methane production by the marine algae Emiliania huxleyi

Methane (CH4), an important greenhouse gas that affects radiation balance and consequently the earth's climate, still has uncertainties in its sinks and sources. The world's oceans are considered to be a source of CH4 to the atmosphere, although the biogeochemical processes involved in its formation are not fully understood. Several recent studies provided strong evidence of CH4 production in oxic marine and freshwaters, but its source is still a topic of debate. Studies of CH4 dynamics in surface waters of oceans and large lakes have concluded that pelagic CH4 supersaturation cannot be sustained either by lateral inputs from littoral or benthic inputs alone. However, regional and temporal oversaturation of surface waters occurs frequently. This comprises the observation of a CH4 oversaturating state within the surface mixed layer, sometimes also termed the "oceanic methane paradox". In this study we considered marine algae as a possible direct source of CH4. Therefore, the coccolithophore Emiliania huxleyi was grown under controlled laboratory conditions and supplemented with two 13C-labeled carbon substrates, namely bicarbonate and a position-specific 13C-labeled methionine (R-S-13CH3). The CH4 production was 0.7 µg particular organic carbon (POC) g−1 d−1, or 30 ng g−1 POC h−1. After supplementation of the cultures with the 13C-labeled substrate, the isotope label was observed in headspace CH4. Moreover, the absence of methanogenic archaea within the algal culture and the oxic conditions during CH4 formation suggest that the widespread marine algae Emiliania huxleyi might contribute to the observed spatially and temporally restricted CH4 oversaturation in ocean surface waters.

La ética hacker frente al capitalismo netárquíco: software libre y peer production en las iniciativas de Economía Colaborativa en Andalucía

En los últimos años el término Economía Colaborativa se ha popularizado sin que, hasta el momento, haya sido definido de manera inequívoca. Bajo esta denominación se engloban experiencias tan diversas como bancos de tiempo, huertos urbanos, startups o grandes plataformas digitales. La proliferación de este tipo de iniciativas puede relacionarse con una multiplicidad de factores tales como el desarrollo tecnológico, la recesión económica y otras crisis superpuestas (medioambiental, de cuidados, de valores, de lo político) y un cierto cambio en los valores sociales. Entre 2014-2015 se han realizado dos investigaciones en Andalucía de manera casi paralela y con una metodología similar. La primera de ellas pretendía identificar prácticas de Economía Colaborativa en el entorno universitario. La segunda investigación identificaba experiencias de emprendimiento a nivel autonómico. A luz de los resultados obtenidos se plantea la siguiente cuestión sobre la naturaleza misma de la Economía Colaborativa: ¿nos encontramos ante prácticas postcapitalistas que abren el camino a una sociedad más justa e igualitaria o, más bien, estamos ante una respuesta del capital para, una vez más, seguir extrayendo de manera privada el valor que se genera socialmente? Este artículo, partiendo del análisis del conjunto de iniciativas detentadas en Andalucía, se centra en aquellas basadas en el software libre y la producción digital concluyendo cómo, gracias a la incorporación de ciertos aspectos de la ética hacker y las lógicas del conocimiento abierto, éstas pueden situarse dentro de un escenario de fomento de los comunes globales frente a las lógicas imperantes del capitalismo netárquico. 

Opportunities and constraints of transhumant small ruminant production in the Chinese Altay Mountains

This PhD thesis focuses on current livelihoods of agro-pastoral livestock keepers, their animal nutrition, herd and rangeland management strategies. It thereby aims to contribute to sustainable rangeland management, livestock production and household income in Qinghe county of the Chinese Altay Mountain region, located in Xinjiang Uyghur Autonomous Region, PR China. In its first part the study characterizes the socio-economic situation and agricultural practices of agro-pastoralists through structured household interviews. The second part provides insights into the grazing behaviour and feed intake of small ruminants on seasonal pastures in this region, and into the quantitative and qualitative biomass offer on natural rangelands. The third part analyses the reproductive performance and annual growth of the local sheep and goat herds, and, by modelling improved feeding and culling strategies, tests herd management options that potentially improve the monetary output per female herd animal without increasing the pressure onto natural rangelands. Taken together, the results of the study suggest that, despite an increase and intensification of cropping and vegetable gardening in the region of Qinghe, livestock rearing is still the major livelihood strategy both in terms of prevalence and relative importance. However, livestock keeping is challenged by low biomass production on rangelands, due to the combined impact of high climate variability and highly localized grazing pressure on the seasonal pastures. Though government regulations try to tackle the latter aspect, their implementation is sometimes difficult. Alternatives to strict regulation of grazing periods and animal numbers on seasonal pastures are, in the case of goats, more rigorous culling strategies and, in the case of sheep and goats, strategic supplementation of the animals in the winter and spring season. However, for the latter strategy to become economically viable, an improvement of live animal and meat marketing options and an investment in local meat processing facilities that add value to the carcasses is needed. As the regional cities grow rapidly, the potential market to absorb diverse and good quality meat products is there, along with the road network connecting Qinghe county to the regional capital. Such governmental measures will not only create new job opportunities in the region but also benefit the cash income of pastoralists in this westernmost region of China.

A probabilistic approach to the estimation of regional photovoltaic power generation using meteorological data

In Germany the upscaling algorithm is currently the standard approach for evaluating the PV power produced in a region. This method involves spatially interpolating the normalized power of a set of reference PV plants to estimate the power production by another set of unknown plants. As little information on the performances of this method could be found in the literature, the first goal of this thesis is to conduct an analysis of the uncertainty associated to this method. It was found that this method can lead to large errors when the set of reference plants has different characteristics or weather conditions than the set of unknown plants and when the set of reference plants is small. Based on these preliminary findings, an alternative method is proposed for calculating the aggregate power production of a set of PV plants. A probabilistic approach has been chosen by which a power production is calculated at each PV plant from corresponding weather data. The probabilistic approach consists of evaluating the power for each frequently occurring value of the parameters and estimating the most probable value by averaging these power values weighted by their frequency of occurrence. Most frequent parameter sets (e.g. module azimuth and tilt angle) and their frequency of occurrence have been assessed on the basis of a statistical analysis of parameters of approx. 35 000 PV plants. It has been found that the plant parameters are statistically dependent on the size and location of the PV plants. Accordingly, separate statistical values have been assessed for 14 classes of nominal capacity and 95 regions in Germany (two-digit zip-code areas). The performances of the upscaling and probabilistic approaches have been compared on the basis of 15 min power measurements from 715 PV plants provided by the German distribution system operator LEW Verteilnetz. It was found that the error of the probabilistic method is smaller than that of the upscaling method when the number of reference plants is sufficiently large (>100 reference plants in the case study considered in this chapter). When the number of reference plants is limited (<50 reference plants for the considered case study), it was found that the proposed approach provides a noticeable gain in accuracy with respect to the upscaling method.

A finite-volume shallow layer method for the MHD instabilities in an aluminium production cell

An electrolytic cell for Aluminium production contains molten metal and molten electrolyte, which are subject to high dc-currents and magnetic fields. Lorentz forces arising from the cross product of current and magnetic field may amplify natural gravity waves at the interface between the two fluids, leading to short circuits in extreme cases. The external magnetic field and current distribution in the production cell is computed through a detailed finite element analysis at Torino Polytechnic. The results are then used to compute the magnetohydrodynamic and thermal effects in the aluminium/electrolyte bath. Each cell has lateral dimensions of 6m x 2m, whilst the bath depth is only 30cm. the electrically resistive electrolyte path, which is critical in the operation of the cell, has layer depth of only a few centimetres below each carbon anode. Because the shallow dimensions of the liquid layer a finite-volume shallow-layer technique has been used at Greenwich to compute the resulting flow-field and interface perturbations. The information obtained from this method, i.e. depth averaged velocities and aluminium/electrolyte interface position is then embedded in the three-dimensional finite volume code PHYSICA and will be used to compute the heat transfer and phase change in the cell.

Delivering Regional Extension in Qld Farming Systems - Central Queensland

The CQ Cotton Regional Extension project has been a key to the delivery of emerging, cutting edge research information and knowledge to the Central Queensland cotton industry. The direct relevance of southern research to cotton production under the conditions experienced in CQ always has been an issue which could be addressed through regional assessment and adaptation. The project links the national research to the region through development and extension, with a strong focus on the major industry production issues including but not limited to disease, Integrated Pest Management (IPM), soils, nutrition and integrated weed management. Susan Mass has supported the implementation of national industry-wide programs particularly the industry Best Management Practices program (myBMP). This project has successfully transitioned to a focus on delivering national outcomes in target lead areas as part of National Development and Delivery Team established by Cotton CRC, CRDC and Cotton Australia, while maintaining a regional extension presence for Central Queensland cotton & grain farming systems. Susan Mass has very effectively merged and integrated strong regional extension support to cotton growers in Central Queensland with delivery of industry extension priorities across the entire industry in the Development and Delivery Team model. Susan is the target lead for disease and farm hygiene. Recognising the challenges of having regionally relevant research in Central Queensland, this project has facilitated locally based research including boll rot, Bt cotton resistance management, and mealybug biology through strong collaborations. This collaborative approach has included linkage to Department of Environment and Resource Managmeent (DERM) groups and myBMP programs resulting in a high uptake in CQ.

Photonic integrated circuits development: a universal transceiver for NG-PON2

In the last years there has been a clear evolution in the world of telecommunications, which goes from new services that need higher speeds and higher bandwidth, until a role of interactions between people and machines, named by Internet of Things (IoT). So, the only technology able to follow this growth is the optical communications. Currently the solution that enables to overcome the day-by-day needs, like collaborative job, audio and video communications and share of les is based on Gigabit-capable Passive Optical Network (G-PON) with the recently successor named Next Generation Passive Optical Network Phase 2 (NG-PON2). This technology is based on the multiplexing domain wavelength and due to its characteristics and performance becomes the more advantageous technology. A major focus of optical communications are Photonic Integrated Circuits (PICs). These can include various components into a single device, which simpli es the design of the optical system, reducing space and power consumption, and improves reliability. These characteristics make this type of devices useful for several applications, that justi es the investments in the development of the technology into a very high level of performance and reliability in terms of the building blocks. With the goal to develop the optical networks of future generations, this work presents the design and implementation of a PIC, which is intended to be a universal transceiver for applications for NG-PON2. The same PIC will be able to be used as an Optical Line Terminal (OLT) or an Optical Network Unit (ONU) and in both cases as transmitter and receiver. Initially a study is made of Passive Optical Network (PON) and its standards. Therefore it is done a theoretical overview that explores the materials used in the development and production of this PIC, which foundries are available, and focusing in SMART Photonics, the components used in the development of this chip. For the conceptualization of the project di erent architectures are designed and part of the laser cavity is simulated using Aspic™. Through the analysis of advantages and disadvantages of each one, it is chosen the best to be used in the implementation. Moreover, the architecture of the transceiver is simulated block by block through the VPItransmissionMaker™ and it is demonstrated its operating principle. Finally it is presented the PIC implementation.

Pasture production and composition response after killing Eucalypt trees with herbicides in central Queensland

Clearing woodlands is practised world-wide to increase crop and livestock production, but can result in unintended consequences including woody regrowth and land degradation. The pasture response of 2 eucalypt woodlands in the central Queensland rangelands to killing trees with herbicides, in the presence or absence of grazing and regular spring burning, was recorded over 7 or 8 years to determine the long-term sustainability of these common practices. Herbage mass and species composition plus tree dynamics were monitored in 2 replicated experiments at each site. For 8 years following herbicide application, killing Eucalyptus populnea F. Muell. (poplar box) trees resulted in a doubling of native pasture herbage mass from that of the pre-existing woodland, with a tree basal area of 8.7 m2 ha-1. Conversely, over 7 years with a similar range of seasons, killing E. melanophloia F. Muell. (silver-leaved ironbark) trees of a similar tree basal area had little impact on herbage mass grown or on pasture composition for the first 4 years before production then increased. Few consistent changes in pasture composition were recorded after killing the trees, although there was an increase in the desirable grasses Dichanthium sericeum (R. Br.) A. Camus (Queensland bluegrass) and Themeda triandra Forssk. (kangaroo grass) when grazed conservatively. Excluding grazing allowed more palatable species of the major grasses to enhance their prominence, but seasonal conditions still had a major influence on their production in particular years. Pasture crown basal area was significantly higher where trees had been killed, especially in the poplar box woodland. Removing tree competition did not have a major effect on pasture composition that was independent of other management impositions or seasons, and it did not result in a rapid increase in herbage mass in both eucalypt communities. The slow pasture response to tree removal at one site indicates that regional models and economic projections relating to tree clearing require community-specific inputs.

Criança e arte: expressão da cultura regional em um ambiente de aprendizagem em arte de uma escola municipal de educação infantil de Rio Grande/RS

Esta dissertação buscou identificar a presença dos aspectos da cultura regional nas situações cotidianas vivenciadas por um grupo de crianças de quatro anos de idade no Ambiente de Aprendizagem em Artes e Ciências Naturais da EMEI Oscar de Moraes, pertencente à rede municipal do Rio Grande (RS). A proposição da investigação partiu da mudança proposta pela Lei Federal nº 12.287/2010, que alterou o segundo parágrafo do artigo 26 da LDB 9394/96. A nova redação estabelece que ―O ensino de arte, especialmente em suas expressões regionais, constituirá componente curricular obrigatório nos diversos níveis da educação básica, de forma a promover o desenvolvimento cultural dos alunos‖ (BRASIL, 2010, p. 1). Trata-se de uma pesquisa de abordagem qualitativa, tendo o estudo de caso como importante elemento de compreensão do ambiente pesquisado e a observação e o registro em caderno de campo como as estratégias utilizadas para a produção de dados. A inserção no Ambiente de Aprendizagem em Artes e Ciências Naturais da EMEI Oscar de Moraes permitiu identificar a utilização desse ambiente para registro, através de diferentes modos e linguagens do trabalho realizado com projetos, e também a possibilidade de descobertas e brincadeiras por meio das produções e criações artísticas das crianças. A análise dos dados foi realizada com base nos seguintes autores: Derdyk (1990), Richter (2004), Edwards (1999), Duarte Júnior (1981), Horn (2007), Ostetto (2000), Rinaldi (2012), Cunha (2014), Brougère (1998), Bertoni (2014). Os resultados expressaram que a presença da família na escola pode ser considerada uma das formas de inserção da cultura regional na escola, promovendo a convivência com diferentes pessoas e ampliando, dessa forma, o repertório de vivências e aprendizados das crianças. Os resultados também evidenciaram a presença da utilização das datas comemorativas nas situações cotidianas do Ambiente de Aprendizagem em Arte e Ciências Naturais, levando em consideração, nesse aspecto, a documentação abordada no estudo e os referenciais utilizados; considerei também como uma possibilidade de inserção e apropriação da cultura regional na escola