929 resultados para Propagation and acclimatization
Resumo:
Fatigue and crack propagation are phenomena affected by high uncertainties, where deterministic methods fail to predict accurately the structural life. The present work aims at coupling reliability analysis with boundary element method. The latter has been recognized as an accurate and efficient numerical technique to deal with mixed mode propagation, which is very interesting for reliability analysis. The coupled procedure allows us to consider uncertainties during the crack growth process. In addition, it computes the probability of fatigue failure for complex structural geometry and loading. Two coupling procedures are considered: direct coupling of reliability and mechanical solvers and indirect coupling by the response surface method. Numerical applications show the performance of the proposed models in lifetime assessment under uncertainties, where the direct method has shown faster convergence than response surface method. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
We discuss the expectation propagation (EP) algorithm for approximate Bayesian inference using a factorizing posterior approximation. For neural network models, we use a central limit theorem argument to make EP tractable when the number of parameters is large. For two types of models, we show that EP can achieve optimal generalization performance when data are drawn from a simple distribution.
Resumo:
Ultrasonometry seems to have a future for the evaluation of fracture healing. Ultrasound propagation velocity (USPV) significantly decreases at the same time that bone diameter decreases as healing takes place, thus approaching normal values. In this investigation, both USPV and broadband ultrasound attenuation (BUA) were measured using a model of a transverse mid-diaphyseal osteotomy of sheep tibiae. Twenty-one sheep were operated and divided into three groups of seven, according to the follow-up period of 30, 60, and 90 days, respectively. The progress of healing of the osteotomy was checked with monthly conventional radiographs. The animals were killed at the end of the period of observation of each group, both operated-upon and intact tibiae being resected and submitted to the measurement of underwater transverse and direct contact transverse and longitudinal USPV and BUA at the osteotomy site. The intact left tibia of the 21 animals was used for control, being examined on a symmetrical diaphyseal segment. USPV increased while BUA decreased with the progression of healing, with significant differences between the operated and untouched tibiae and between the periods of observation, for most of the comparisons. There was a strong negative correlation between USPV and BUA. Both USPV and BUA directly reflect and can help predict the healing of fractures, but USPV alone can be used as a fundamental parameter. Ultrasonometry may be of use in clinical application to humans provided adequate adaptations can be developed. (C) 2010 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 29:444-451, 2011
Resumo:
Brain excitability diseases like epilepsy constitute one factor that influences brain electrophysiological features. Cortical spreading depression (CSD) is a phenomenon that can be altered by changes in brain excitability. CSD propagation was presently characterized in adult mate and female rats from a normal Wistar strain and from a genetically audiogenic seizure-prone strain, the Wistar audiogenic rat (WAR), both previously submitted (RAS(+)), or not (RAS(-)), to repetitive acoustic stimulation, to provoke audiogenic kindling in the WAR-strain. A gender-specific change in CSD-propagation was found. Compared to seizure-resistant animals, in the RAS- condition, mate and female WARs, respectively, presented CSD-propagation impairment and facilitation, characterized, respectively, by lower and higher propagation velocities (P<0.05). In contraposition, in the RAS(+) condition, mate and female WARs displayed, respectively, higher and tower CSD-propagation rates, as compared to the corresponding controls. In some Wistar and WAR females, we determined estrous cycle status on the day of the CSD-recording as being either estrous or diestrous; no cycle-phase-related differences in CSD-propagation velocities were detected. In contrast to other epilepsy models, such as Status Epilepticus induced by pilocarpine, despite the CSD-velocity reduction, in no case was CSD propagation blocked in WARs. The results suggest a gender-related, estrous cycle-phase-independent modification in the CSD-susceptibility of WAR rats, both in the RAS(+) and RAS(-) situation. (C) 2008 Elsevier B.V. All rights reserved.
Propagation of nonstationary curved and stretched premixed flames with multistep reaction mechanisms
Resumo:
The propagation speed of a thin premixed flame disturbed by an unsteady fluid flow of a larger scale is considered. The flame may also have a general shape but the reaction zone is assumed to be thin compared to the flame thickness. Unlike in preceding publications, the presented asymptotic analysis is performed for a general multistep reaction mechanism and, at the same time, the flame front is curved by the fluid flow. The resulting equations define the propagation speed of disturbed flames in terms of the properties of undisturbed planar flames and the flame stretch. Special attention is paid to the near-equidiffusion limit. In this case, the flame propagation speed is shown to depend on the effective Zeldovich number Z(f) , and the flame stretch. Unlike the conventional Zeldovich number, the effective Zeldovich number is not necessarily linked directly to the activation energies of the reactions. Several examples of determining the effective Zeldovich number for reduced combustion mechanisms are given while, for realistic reactions, the effective Zeldovich number is determined from experiments. Another feature of the present approach is represented by the relatively simple asymptotic technique based on the adaptive generalized curvilinear system of coordinates attached to the flame (i.e., intrinsic disturbed flame equations [IDFE]).
Resumo:
The most widely used method for predicting the onset of continuous caving is Laubscher's caving chart. A detailed examination of this method was undertaken which concluded that it had limitations which may impact on results, particularly when dealing with stronger rock masses that are outside current experience. These limitations relate to inadequate guidelines for adjustment factors to rock mass rating (RMR), concerns about the position on the chart of critical case history data, undocumented changes to the method and an inadequate number of data points to be confident of stability boundaries. A review was undertaken on the application and reliability of a numerical method of assessing cavability. The review highlighted a number of issues, which at this stage, make numerical continuum methods problematic for predicting cavability. This is in particular reference to sensitivity to input parameters that are difficult to determine accurately and mesh dependency. An extended version of the Mathews method for open stope design was developed as an alternative method of predicting the onset of continuous caving. A number of caving case histories were collected and analyzed and a caving boundary delineated statistically on the Mathews stability graph. The definition of the caving boundary was aided by the existence of a large and wide-ranging stability database from non-caving mines. A caving rate model was extrapolated from the extended Mathews stability graph but could only be partially validated due to a lack of reliable data.
Resumo:
A hyphenated instrumental approach has been used to obtain reliable values for the propagation rate coefficients as a function of conversion for polymerizations of methyl methacrylate (MMA) and a mixture of MMA and ethyleneglycol dimethacrylate (EGDMA) with a 1:1 concentration of double bonds, from near the onset of the Trommsdorf region into the glass region. ESR spectroscopy was used to measure the radical concentration while FT-NIR fibre-optic spectroscopy was employed to measure instantaneously the double-bond concentration within the temperature-controlled cavity of the ESR instrument during polymerization. The advantage of this approach to the measurement of the rate coefficient is that it is equally applicable to branching and linear polymerizations. For the polymerization of methyl methacrylate, the values of the rate coefficient at the lowest conversions at which reliable values could be obtained were in agreement with recently reported values obtained by the PLP-SEC method. For the lowest conversions, the values obtained were 403 1 mol(-1) s(-1) at 306 K for MMA and 5201 mol(-1) s(-1) at 310 K for a 1:1 mixture of MMA and EGDMA. (C) 2003 Society of Chemical Industry.
Resumo:
There is a great demand for simpler and less costly laboratory techniques and for more accessible procedures for orchid breeders who do not have the necessary theoretical basis to use the traditional seed and clone production methods of orchids in vitro. The aim of this study was to assess the use of sodium hypochlorite (NaClO) as a decontaminant in the process of inoculating adult orchid explants of Arundina bambusifolia and Epidendrum ibaguenses. Solutions of NaClO (1.200, 2.400, 3.600, 4.800 and 6.000 mg L-1 - equivalent to 50, 100, 150, 200 and 250 mL L-1 of commercial bleach - CB) were sprayed on the explants (1.0 mL) and the culture medium (GB5), in the presence or absence of activated charcoal (2 g L-1). The explants used were nodal segments of field-grown adult plants. The procedures for inoculating the explants were conducted outside the laminar flow chamber (LFC), except for the control treatment (autoclaved medium and explant inoculation inside the LFC). The best results for fresh weight yield, height and number of shoots were obtained using NaClO in solution at 1.200 mg L-1 (equivalent to 50 mL L-1 commercial bleach) with activated charcoal in the culture medium. Fresh weight figures were 1.10 g/jar for Arundina bambusifolia and 0.16 g/jar for Epidendrum ibaguenses. Spraying the NaClO solutions controls the contamination of the culture medium already inoculated with the explants.
Resumo:
En este proyecto se desarrollarán algoritmos numéricos para sistemas no lineales hiperbólicos-parabólicos de ecuaciones diferenciales en derivadas parciales. Dichos sistemas tienen aplicación en propagación de ondas en ámbitos aeroespaciales y astrofísicos.Objetivos generales: 1)Desarrollo y mejora de algoritmos numéricos con la finalidad de incrementar la calidad en la simulación de propagación e interacción de ondas gasdinámicas y magnetogasdinámicas no lineales. 2)Desarrollo de códigos computacionales con la finalidad de simular flujos gasdinámicos de elevada entalpía incluyendo cambios químicos, efectos dispersivos y difusivos.3)Desarrollo de códigos computacionales con la finalidad de simular flujos magnetogasdinámicos ideales y reales.4)Aplicación de los nuevos algoritmos y códigos computacionales a la solución del flujo aerotermodinámico alrededor de cuerpos que ingresan en la atmósfera terrestre. 5)Aplicación de los nuevos algoritmos y códigos computacionales a la simulación del comportamiento dinámico no lineal de arcos magnéticos en la corona solar. 6)Desarrollo de nuevos modelos para describir el comportamiento no lineal de arcos magnéticos en la corona solar.Este proyecto presenta como objetivo principal la introducción de mejoras en algoritmos numéricos para simular la propagación e interacción de ondas no lineales en dos medios gaseosos: aquellos que no poseen carga eléctrica libre (flujos gasdinámicos) y aquellos que tienen carga eléctrica libre (flujos magnetogasdinámicos). Al mismo tiempo se desarrollarán códigos computacionales que implementen las mejoras de las técnicas numéricas.Los algoritmos numéricos se aplicarán con la finalidad de incrementar el conocimiento en tópicos de interés en la ingeniería aeroespacial como es el cálculo del flujo de calor y fuerzas aerotermodinámicas que soportan objetos que ingresan a la atmósfera terrestre y en temas de astrofísica como la propagación e interacción de ondas, tanto para la transferencia de energía como para la generación de inestabilidades en arcos magnéticos de la corona solar. Estos dos temas poseen en común las técnicas y algoritmos numéricos con los que serán tratados. Las ecuaciones gasdinámicas y magnetogasdinámicas ideales conforman sistemas hiperbólicos de ecuaciones diferenciales y pueden ser solucionados utilizando "Riemann solvers" junto con el método de volúmenes finitos (Toro 1999; Udrea 1999; LeVeque 1992 y 2005). La inclusión de efectos difusivos genera que los sistemas de ecuaciones resulten hiperbólicos-parabólicos. La contribución parabólica puede ser considerada como términos fuentes y tratada adicionalmente tanto en forma explícita como implícita (Udrea 1999; LeVeque 2005).Para analizar el flujo alrededor de cuerpos que ingresan en la atmósfera se utilizarán las ecuaciones de Navier-Stokes químicamente activas, mientras la temperatura no supere los 6000K. Para mayores temperaturas es necesario considerar efectos de ionización (Anderson, 1989). Tanto los efectos difusivos como los cambios químicos serán considerados como términos fuentes en las ecuaciones de Euler. Para tratar la propagación de ondas, transferencia de energía e inestabilidades en arcos magnéticos de la corona solar se utilizarán las ecuaciones de la magnetogasdinámica ideal y real. En este caso será también conveniente implementar términos fuente para el tratamiento de fenómenos de transporte como el flujo de calor y el de radiación. Los códigos utilizarán la técnica de volúmenes finitos, junto con esquemas "Total Variation Disminishing - TVD" sobre mallas estructuradas y no estructuradas.
Resumo:
Reaction separation processes, reactive distillation, chromatographic reactor, equilibrium theory, nonlinear waves, process control, observer design, asymptoticaly exact input/output-linearization
Resumo:
Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2014
Resumo:
This paper analyzes the propagation of monetary policy shocks through the creation of credit in an economy. Models of the monetary transmission mechanism typically feature responses which last for a few quarters contrary to what the empirical evidence suggests. To propagate the impact of monetary shocks over time, these models introduce adjustment costs by which agents find it optimal to change their decisions slowly. This paper presents another explanation that does not rely on any sort of adjustment costs or stickiness. In our economy, agents own assets and make occupational choices. Banks intermediate between agents demanding and supplying assets. Our interpretation is based on the way banks create credit and how the monetary authority affects the process of financial intermediation through its monetary policy. As the central bank lowers the interest rate by buying government bonds in exchange for reserves, high productive entrepreneurs are able to borrow more resources from low productivity agents. We show that this movement of capital among agents sets in motion a response of the economy that resembles an expansionary phase of the cycle.
Resumo:
In this study the hepatic lipoprotein lipase (LPL), activity was evaluated in adult female mice acclimatized at 5-C and submitted to carbon tetrachloride (CCI) or ethionine, in order to determine the possible role of this enzuyme in the fatty liver. The results were compared with those obtained in mice kept at room temperature (27-C) that the same hepatoesteatosis inducing agent. In contrast to animals kept at room temperature, in cold aclimatized mice neither the enhancement of the LPL-liver activity by the action of CCI or ethionine occurred nor the development of fatty infiltration in the liver was observed. We conclude that the low temperature induced a protective effect against CCI or ethionine-induced fatty liver that was correlated with the no-increase of the hepatic LPL activity.