Long-term clinical evaluation of the color stability and stainability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of self-adhesive and self-etching resin cements on the bond strength of nonmetallic posts in different root thirds

The purpose of this study was to evaluate the effect of self-adhesive and self-etching resin cements on the bond strength of nonmetallic posts in different root regions. Sixty single-rooted human teeth were decoronated, endodontically treated, post-space prepared, and divided into six groups. Glass-fiber (GF) posts (Exacto, Angelus) and fiber-reinforced composite (FRC) posts (EverStick, StickTeck) were cemented with self-adhesive resin cement (Breeze) (SA) (Pentral Clinical) and self-etching resin cement (Panavia-F) (SE) (Kuraray). Six 1-mm-thick rods were obtained from the cervical (C), middle (M), and apical (A) regions of the roots. The specimens were then subjected to microtensile testing in a special machine (BISCO; Schaumburg, IL, USA) at a crosshead speed of 0.5 mm/min. Microtensile bond strength data were analyzed with two-way ANOVA and Tukey's tests. Means (and SD) of the MPa were: GF/SA/C: 14.32 (2.84), GF/SA/M: 10.69 (2.72), GF/SA/A: 6.77 (2.17), GF/SE/C: 11.56 (4.13), GF/SE/M: 6.49 (2.54), GF/SE/A: 3.60 (1.29), FRC/SA/C: 16.89 (2.66), FRC/SA/M: 13.18 (2.19), FRC/SA/A: 8.45 (1.77), FRC/SE/C: 13.69 (3.26), FRC/SE/M: 9.58 (2.23), FRC/SE/A: 5.62 (2.12). The difference among the regions was statistically significant for all groups (p < 0.05). The self-adhesive resin cement showed better results than the self-etching resin cement when compared to each post (p < 0.05). No statistically significant differences in bond strengths of the resin cements when comparable to each post (p > 0.05). The bond strength values were significantly affected by the resin cement and the highest values were found for self-adhesive resin cement.

Polymerization kinetics and polymerization stress in resin composites after accelerated aging as a function of the expiration date

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of a mixed vector-scalar kink-like potential for spinless particles in two-dimensional space time

The intrinsically relativistic problem of spinless particles subject to a general mixing of vector and scalar kink- like potentials (similar to tanh gamma x) is investigated. The problem is mapped into the exactly solvable Sturm - Liouville problem with the Rosen - Morse potential and exact bounded solutions for particles and antiparticles are found. The behavior of the spectrum is discussed in some detail. An apparent paradox concerning the uncertainty principle is solved by recurring to the concept of effective Compton wavelength.

Evaluation of an Experimental Gel Containing Euclea natalensis: An In Vitro Study

Objective. To evaluate the effect of an experimental gel containing Euclea natalensis extract on dentin permeability. Methods. Thirty-six dentin discs, 1-mm-thick. The discs were prepared from the coronal dentin of extracted human third molars that were divided into 3 groups (n = 10). The dentin discs in each group were treated with the groups following experimental materials: (FG): 1.23% fluoride gel, pH 4.1; (EG): Euclea natalensis extract gel, pH 4.1; (CG): control gel, pH 4.1. The gels were applied to the occlusal slide of the dentin under the following conditions: after 37% phosphoric acid and before 6% citric acid. The hydraulic conductance (HC) of each condition was determined four times using a fluid flow apparatus (Flodec). The data were analyzed using Two-way ANOVA and Tukey's test (P < 0.05). Results. The greatest mean reduction in HC was produced in group EG dentin discs (61.2%; P < 0.05). Even after acid challenge with 6% citric acid the great reduction occurred in group EG (66.0%; P < 0.05) than other groups (CG-77.1%, FG-90.8%). Conclusion. E. natalensis gel not only reduced dentin permeability, but also resisted posttreatment citric acid challenge without changing its permeability. Further research has to confirm this promising result in the clinical situation.

Internal fit of two all-ceramic systems and metal-ceramic crowns

Objectives: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. Material and Methods: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 groups (n=20 each) according to the core material used (metal, ICA or Y-TZP). The IF of the crowns was measured using the replica technique, which employs a light body polyvinyl siloxane impression material to simulate the cement layer thickness. The data were analyzed according to the surfaces obtained for the occlusal space (OS), axial space (AS) and total mean (TM) using two-way ANOVA with Tukey's multiple comparison test (p<0.05). Results: No differences among the different areas were detected in the MC group. For the Y-TZP and ICA groups, AS was statistically lower than both OS and TM. No differences in AS were observed among the groups. However, OS and TM showed significantly higher values for ICA and Y-TZP groups than MC group. Comparisons of ICA and Y-TZP revealed that OS was significantly lower for Y-TZP group, whereas no differences were observed for TM. Conclusions: The total mean achieved by all groups was within the range of clinical acceptability. However, the metal-ceramic group demonstrated significantly lower values than the all-ceramic groups, especially in OS.

Nd:YAG Laser Irradiation of Etched/Unetched Dentin Through an Uncured Two-step Etch-and-Rinse Adhesive and its Effect on Microtensile Bond Strength

Purpose: To evaluate whether Nd:YAG laser irradiation of etched and unetched dentin through an uncured adhesive affected the microtensile bond strength (pTBS). Materials and Methods: Flat dentin surfaces were created in 19 extracted human third molars. Adper Single Bond (SB) adhesive was applied over etched (groups 1 to 3) or unetched dentin (groups 4 to 6). The dentin was then irradiated with a Nd:YAG laser through the uncured adhesive, using 0.75 or 1 W power settings, except for the control groups (groups 1 and 4). The adhesive was light cured and composite crowns were built up. After 24 h, the teeth were sectioned into beams, with cross-sectional areas of 0.49 mm(2), and were stressed under tension. Data were statistically analyzed using two-way ANOVA and Tukey's test (alpha = 5%). Dentin surfaces of fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM). Results: Acid etching, laser irradiation, and their interaction significantly affected bonding (p < 0.05). Laser irradiation did not improve bonding of etched dentin to resin (p > 0.05). However, higher pTBS means were found on unetched lased dentin (groups 5 and 6), but only in comparison to group 4, where neither lasing nor etching was performed. Groups 4 to 6 showed the lowest pTBS means among all groups tested (p < 0.05). Laser irradiation did not change the characteristics of the hybrid layers created, while solidification globules were observed on lased dentin surfaces under SEM. Conclusion: Laser irradiation of dentin through the uncured adhesive did not significantly improve the pTBS in comparison to the suggested manufacturer's technique.

Long-term rabbits bone response to titanium implants in the presence of inorganic bovine-derived graft

This study evaluated bone responses to titanium implants in the presence of an inorganic graft material. The bilateral mandible incisors of 24 rabbits were surgically extracted and one of the exposed sockets, chosen at random, was filled with an inorganic xenogenic bone graft (Gen-ox (R)), whereas the remaining socket was left to heal naturally and served as a control. After 60 days, titanium implants were inserted in the specific areas, and on days 0, 30, 60, and 180 after the implant insertions, six animals of each group were killed. Digital periapical radiography of implant region was obtained and vertical bone height (VBH) and bone density (BD) were evaluated by digital analysis system. In the undecalcified tissue cuts, bone-to-implant contact (BIC) and bone area (BA) within the limits of the implant threads were evaluated and compared statistically by means of two-way ANOVA and Tukey's test (rho < 0.05). No significant differences were detected in VBH and BA, either between groups or between different experimental intervals. The BD was significantly higher in the experimental group than in the control group in all the intervals tested, but there were no significant differences by interval. The BIC was statistically lower in the control group on day 0; however, a significant increase was observed on days 60 and 180 (rho < 0.05). The use of an inorganic xenograft prior to insertion of a titanium implant did not interfere with the course of osseointegration.

A new simple class of superpotentials in SUSY quantum mechanics

In this work, we introduce the class of quantum mechanics superpotentials W(x) = g epsilon(x)x(2n) and study in detail the cases n = 0 and 1. The n = 0 superpotential is shown to lead to the known problem of two supersymmetrically related Dirac delta potentials (well and barrier). The n = 1 case results in the potentials V+/-(x) = g(2)x(4) +/- 2g|x|. For V-, we present the exact ground-state solution and study the excited states by a variational technique. Starting from the ground state of V- and using logarithmic perturbation theory, we study the ground states of V+ and also of V(x) = g(2)x(4) and compare the result obtained in this new way with other results for this last potential in the literature.

Degradation of the resin-dentin bonds after simulated and inhibited cariogenic challenge in an in situ model

The aim of this study was to evaluate the resindentin bonds of two simplified etch-and-rinse adhesive after simulated cariogenic and inhibited cariogenic challenge in situ. Dental cavities (4 mm wide, 4 mm long, and 1.5 mm deep) were prepared in 60 bovine teeth with enamel margins. Restorations were bonded with either adhesive Adper Single Bond 2 (3MESPE) or Optibond Solo Plus (Kerr). Forty restorations were included in an intra-oral palatal appliance that was used for 10 adult volunteers while the remaining 20 dental blocks were not submitted to any cariogenic challenge [NC group] and tested immediately. For the simulated cariogenic challenge [C+DA], each volunteer dropped 20% sucrose solution onto all blocks four times a day during 14 days and distilled water twice a day. In the inhibited cariogenic challenge group [C + FA], the same procedure was done, but slurry of fluoride dentifrice (1.100 ppm) was applied instead of water. The restored bovine blocks were sectioned to obtain a slice for cross-sectional Vickers microhardness evaluation and resindentin bonded sticks (0.8 mm2) for resindentin microtensile evaluation. Data were evaluated by two-way ANOVA and Tukey's tests (a = 0.05). Statistically lower microhardness values and degradation of the resindentin bonds were only found in the C + DW group for both adhesives. The in situ model seems to be a suitable short-term methodology to investigate the degradation of the resindentin bonds under a more realistic condition. (c) 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 100B: 14661471, 2012.

SEM analysis and push-out bond strength of fiberglass posts luted with different cements of glass-ionomer in humid environment: pilot test

The objective of this study was to evaluate the push-out bond strength of fiberglass resin reinforced bonded with five ionomer cements. Also, the interface between cement and dentin was inspected by means of SEM. Fifty human canines were chose after rigorous scrutiny process, endodontically treated and divided randomly into five groups (n = 3) according to cement tested: Group I – Ionoseal (VOCO), Group II – Fugi I (GC), Group III – Fugi II Improved (GC), Group IV – Rely X Luting 2 (3M ESPE), Group V – Ketac Cem (3M ESPE). The post-space was prepared to receive a fiberglass post, which was tried before cementation process. No dentin or post surface pretreatment was carried out. After post bonding, all roots were cross-sectioned to acquire 3 thin-slices (1 mm) from three specific regions of tooth (cervical, medium and apical). A Universal test machine was used to carry out the push-out test with cross-head speed set to 0.5mm/mim. All failed specimens were observed under optical microscope to identify the failure mode. Representative specimens from each group was inspected under SEM. The data were analyzed by Kolmogorov-Smirnov and Levene’s tests and by two-way ANOVA, and Tukey’s port hoc test at a significance level of 5%. It was compared the images obtained for determination of types of failures more occurred in different levels. SEM inspection displayed that all cements filled the space between post and dentin, however, some imperfections such bubles and voids were noticed in all groups in some degree of extension. The push-out bond strength showed that cement Ketac Cem presented significant higher results when compared to the Ionoseal (P = 0.02). There were no statistical significant differences among other cements.

Internal fit of two all-ceramic systems and metal-ceramic crowns

OBJECTIVES: The aim of this study was to investigate the internal fit (IF) of glass-infiltrated alumina (ICA - In-Ceram Alumina), yttria-stabilized tetragonal zirconia polycrystals (Y-TZP - IPS e.max ZirCAD), and metal-ceramic (MC - Ni-Cr alloy) crowns. MATERIAL AND METHODS: Sixty standardized resin-tooth replicas of a maxillary first molar were produced for crown placement and divided into 3 groups (n=20 each) according to the core material used (metal, ICA or Y-TZP). The IF of the crowns was measured using the replica technique, which employs a light body polyvinyl siloxane impression material to simulate the cement layer thickness. The data were analyzed according to the surfaces obtained for the occlusal space (OS), axial space (AS) and total mean (TM) using two-way ANOVA with Tukey s multiple comparison test (p<0.05). RESULTS: No differences among the different areas were detected in the MC group. For the Y-TZP and ICA groups, AS was statistically lower than both OS and TM. No differences in AS were observed among the groups. However, OS and TM showed significantly higher values for ICA and Y-TZP groups than MC group. Comparisons of ICA and Y-TZP revealed that OS was significantly lower for Y-TZP group, whereas no differences were observed for TM. CONCLUSIONS: The total mean achieved by all groups was within the range of clinical acceptability. However, the metal-ceramic group demonstrated significantly lower values than the all-ceramic groups, especially in OS.

Problem of Tragedy and Tragic Consciousness in Russia at the turn of the 19th Century

This project intertwines philosophical and historico-literary themes, taking as its starting point the concept of tragic consciousness inherent in the epoch of classicism. The research work makes use of ontological categories in order to describe the underlying principles of the image of the world which was created in philosophical and scientific theories of the 17th century as well as in contemporary drama. Using these categories brought Mr. Vilk to the conclusion that the classical picture of the world implied a certain dualism; not the Manichaean division between light and darkness but the discrimination between nature and absolute being, i.e. God. Mr. Vilk begins with an examination of the philosophical essence of French classical theatre of the XVII and XVIII centuries. The history of French classical tragedy can be divided into three periods: from the mid 17th to early 19th centuries when it triumphed all over France and exerted a powerful influence over almost all European countries; followed by the period of its rejection by the Romantics, who declared classicism to be "artificial and rational"; and finally our own century which has taken a more moderate line. Nevertheless, French classical tragedy has never fully recovered its status. Instead, it is ancient tragedy and the works of Shakespeare that are regarded to be the most adequate embodiment of the tragic. Consequently they still provoke a great number of new interpretations ranging from specialised literary criticism to more philosophical rumination. An important feature of classical tragedy is a system of rules and unities which reveals a hidden ontological structure of the world. The ontological picture of the dramatic world can be described in categories worked out by medieval philosophy - being, essence and existence. The first category is to be understood as a tendency toward permanency and stability (within eternity) connected with this or that fragment of dramatic reality. The second implies a certain set of permanent elements that make up the reality. And the third - existence - should be understood as "an act of being", as a realisation of permanently renewed processes of life. All of these categories can be found in every artistic reality but the accents put on one or another and their interrelations create different ontological perspectives. Mr. Vilk plots the movement of thought, expressed in both philosophical and scientific discourses, away from Aristotle's essential forms, and towards a prioritising of existence, and shows how new forms of literature and drama structured the world according to these evolving requirements. At the same time the world created in classical tragedy fully preserves another ontological paradigm - being - as a fundamental permanence. As far as the tragic hero's motivations are concerned this paradigm is revealed in the dedication of his whole self to some cause, and his oath of fidelity, attitudes which shape his behaviour. It may be the idea of the State, or personal honour, or something borrowed from the emotional sphere, passionate love. Mr. Vilk views the conflicting ambivalence of existence and being, duty as responsibility and duty as fidelity, as underlying the main conflict of classical tragedy of the 17th century. Having plotted the movement of the being/existence duality through its manifestations in 17th century tragedy, Mr. Vilk moves to the 18th century, when tragedy took a philosophical turn. A dualistic view of the world became supplanted by the Enlightenment idea of a natural law, rooted in nature. The main point of tragedy now was to reveal that such conflicts as might take place had an anti-rational nature, that they arose as the result of a kind of superstition caused by social reasons. These themes Mr. Vilk now pursues through Russian dramatists of the 18th and early 19th centuries. He begins with Sumarakov, whose philosophical thought has a religious bias. According to Sumarakov, the dualism of the divineness and naturalness of man is on the one hand an eternal paradox, and on the other, a moral challenge for humans to try to unite the two opposites. His early tragedies are not concerned with social evils or the triumph of natural feelings and human reason, but rather the tragic disharmony in the nature of man and the world. Mr Vilk turns next to the work of Kniazhnin. He is particularly keen to rescue his reputation from the judgements of critics who accuse him of being imitative, and in order to do so, analyses in detail the tragedy "Dido", in which Kniazhnin makes an attempt to revive the image of great heroes and city-founders. Aeneas represents the idea of the "being" of Troy, his destiny is the re-establishment of the city (the future Rome). The moral aspect behind this idea is faithfulness, he devotes himself to Gods. Dido is also the creator of a city, endowed with "natural powers" and abilities, but her creation is lacking internal stability grounded in "being". The unity of the two motives is only achieved through Dido's sacrifice of herself and her city to Aeneus. Mr Vilk's next subject is Kheraskov, whose peculiarity lies in the influence of free-mason mysticism on his work. This section deals with one of the most important philosophical assumptions contained in contemporary free-mason literature of the time - the idea of the trinitarian hierarchy inherent in man and the world: body - soul - spirit, and nature - law - grace. Finally, Mr. Vilk assess the work of Ozerov, the last major Russian tragedian. The tragedies which earned him fame, "Oedipus in Athens", "Fingal" and "Dmitri Donskoi", present a compromise between the Enlightenment's emphasis on harmony and ontological tragic conflict. But it is in "Polixene" that a real meeting of the Russian tradition with the age-old history of the genre takes place. The male and female characters of "Polixene" distinctly express the elements of "being" and "existence". Each of the participants of the conflict possesses some dominant characteristic personifying a certain indispensable part of the moral world, a certain "virtue". But their independent efforts are unable to overcome the ontological gap separating them. The end of the tragedy - Polixene's sacrificial self-immolation - paradoxically combines the glorification of each party involved in the conflict, and their condemnation. The final part of Mr. Vilk's research deals with the influence of "Polixene" upon subsequent dramatic art. In this respect Katenin's "Andromacha", inspired by "Polixene", is important to mention. In "Andromacha" a decisive divergence from the principles of the philosophical tragedy of Russian classicism and the ontology of classicism occurs: a new character appears as an independent personality, directed by his private interest. It was Katenin who was to become the intermediary between Pushkin and classical tragedy.

Data-driven estimates of the number of clusters in multivariate time series

An important problem in unsupervised data clustering is how to determine the number of clusters. Here we investigate how this can be achieved in an automated way by using interrelation matrices of multivariate time series. Two nonparametric and purely data driven algorithms are expounded and compared. The first exploits the eigenvalue spectra of surrogate data, while the second employs the eigenvector components of the interrelation matrix. Compared to the first algorithm, the second approach is computationally faster and not limited to linear interrelation measures.

A comparison of labor and delivery management activities in two settings

Similarities and differences in management activities and patient health outcomes between a traditional physician staffed labor and delivery setting and a certified nurse-midwife staffed Birth Center within the same hospital were described. The 950 study subjects, low income, minority women, were classified as low obstetrical risk by a POPRAS score of 25 points or less at time of admission for labor and delivery. The study subjects were similar in demographic, antepartum and intrapartum characteristics; the labor course was problem free for the majority in both settings. There were no remarkable differences in health outcomes between the groups. Management activities varied between settings; these variations were policy related rather than health related. The POPRAS rating system was an accurate predictor for 93% of BC subjects and 85% of LDU subjects. Charge for service was approximately $600 less for BC women; length of stay did not contribute to the difference in charge. Overall, BC respondents to the attitude survey were more satisfied with their labor and delivery experience than L\&DU women. ^