Modelo de decisão multicritério para seleções interciclo das universidades novas: estudo na Universidade Federal do Rio Grande do Norte

The discussions wherein develop proposals for university reform in Brazil include, among other things, the conception of the university titled "New University", whose structural origin comes from the bill of higher education reform and unification of the foundations of education European upper (Bologna process). At its core, the Bologna process has imposed a series of transformations, among which, the promotion of mobility, as a stimulus to interinstitutional cooperation to enable an better and bigger qualification of the students. Nevertheless, what we see is that this point is one of the main points made flawed by Brazilian institutions that have adopted this model of higher education. An example is the Bachelor of Science and Technology - BC&T, Federal University of Rio Grande do Norte - UFRN, where there are problems of the internal order, represented by the problem of the reusing of the disciplines, such also of external order, in cases of transfers interinstitutional. Because of this, and knowing that this is a typical problem in which multiple criteria are involved, the aim of this study is to propose a multicriteria model for selection of interciclo of the BC&T of the UFRN which addresses the issue of mobility. For this, this study was of exploratory and study case nature, use as tools of data collection, the bibliographic and documentary research, as well as semi-structured interviews. For the elaboration of the model, were used the five phases most commonly used in the modeling of problems in operational research in a sample of 91 students of BC&T. As a result, we obtained a model that addresses the issue of internal and external mobility of the school and that, moreover, was also more robust and fair than the current model of BC&T and also what is used in other courses of the UFRN, taking into consideration the expected results by the decision makers

Avaliação da potencialidade dos resíduos de gesso de revestimento incorporados em formulações de massas cerâmicas

In building, during the implementation process of major or even minor works, there is a considerable waste of plaster in the steps of coating, making it is a negative factor because of the loss of these processes constructive remains incorporated into buildings, as component, whose final dimensions are higher than those projected. Another negative factor is the disposal of waste gypsum in inappropriate places, thus contributing to the degradation of environmental quality, due to the leaching of this waste and may trigger the formation of sulfuric acid. Therefore, based on this picture, processing and reuse of waste coating, combined with the ceramics industry, which is a strong potential in the reuse of certain types of waste, promote mutual benefits. Thus the overall objective of this work is to conduct a search with scientific and technological aspects, to determine the effect of the incorporation of the residue of plaster for coating, from the building, the formulation of bodies for red ceramic. The residue of plaster coating was collected and characterized. They were also selected raw materials of two ceramic poles of the state of Rio Grande do Norte and formulations have been made with the intention of obtaining those with the best physical and mechanical properties, the residue was added the percentage of 5%, 10%, 15%, 20%, 25% and 30%, in the best formulation of ceramic industry 1 and, according the properties analyses, 5%, 10% and 15% as the best results of ceramic industry 2. The samples were sintered at temperatures of 850 ºC, 950 °C and 1050 °C, the heating rate of 5 ºC / min with isotherm of two hours. They were submitted to testing technology, such as lineal shrinkage, water absorption, apparent porosity, apparent density and bending resistence. The residue incorporation best results in the formulations of mass in red ceramic, were observed between the temperatures of 850 ºC and 950 ºC, in those formulations that have illite clays and medium plastic in their composition, in the range of 0% to 15% residue incorporated

Efeito das variáveis laboratoriais protéticas na adesão da porcelana com ligas de níquel-cromo

The metalceramic crowns are usually used in dentistry because they provide a resistant structure due to its metallic base and its aesthetics from the porcelain that recovers this structure. To manufacture these crowns, a series of stages should be accomplished in the prosthetic laboratories, and many variables can influence its success. Changes in these variables cause alterations in the metallic alloy and in the porcelain, so, as consequence, in the adhesion between them. The composition of the metal alloy can be modified by recasting alloys, a common practice in some prosthetic laboratories. The aim of this paper is to make a systematic study investigating metalceramic crowns as well as analyzing the effect of recasting Ni-Cr alloys. Another variable which can influence the mechanism of metalceramic union is the temperature used in firing porcelain procedure. Each porcelain has to be fired in a fixed temperature which is determined by the manufacturer and its change can cause serious damages. This research simulate situations that may occur on laboratory procedures and observe their consequences in the quality of the metalceramic union. A scanning eletron microscopy and an optic microscopy were accomplish to analyse the metal-ceramic interface. No differences have been found when remelting alloys were used. The microhardness were similar in Ni-Cr alloys casted once, twice and three times. A wettability test was accomplished using a software developed at the Laboratório de Processamento de Materiais por Plasma, on the Universidade Federal do Rio Grande do Norte. No differences were found in the contact angle between the solid surface (metallic substratum) and the tangencial plane to the liquid surface (opaque). To analyse if the temperature of porcelain firing procedure could influence the contact area between metal and porcelain, a variation in its final temperature was achieve from 980° to 955°C. Once more, no differences have been found

O esverdeamento da economia e os tributos verdes : um duro caminho rumo à sustentabilidade da gestão dos resíduos sólidos urbanos (RSU)

Tese (doutorado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2013.

A sustentabilidade da água

Dissertação de Mestrado para a obtenção do grau de Mestre em Mestrado Integrado em Arquitectura com Especialização em Arquitectura de Interiores, apresentada na Faculdade de Arquitectura da Universidade Técnica de Lisboa.

Interface natural baseado no movimento da cabeça e olhos

Dissertação de Mestrado, Engenharia Elétrica e Eletrónica, Especialização em Sistemas de Energia e Controlo, Instituto Superior de Engenharia, Universidade do Algarve, 2015

Formulação de massas cerâmicas para porcelanas elétricas utilizando resíduos oriundos de corpos de fusíveis

The power industry generates as waste ceramic bodies of electrical fuses that are discarded after use. The formulation of ceramic bodies for porcelain electrical insulators using waste from the bodies fuse allocation promotes environmentally appropriate, through the reuse of the material. This work evaluated the technical feasibility of using waste for use in electrical porcelains with formulations containing the residue, feldspar and kaolinite. The raw materials were processed through grinding and sieving to 200 mesh. The ceramic material obtained from the proposed formulations with 25%, 30%, 34% and 40% of the residue went through a vibratory mill for grinding and homogenization, and then were sieved at 325 mesh. The samples were shaped in a uniaxial press, with the application of 25 MPa and sintered at 1100° C, 1150°C, 1200°C, 1225°C and 1250°C, at levels of 20 and 45 minutes. Were also developed bodies of evidence with reference formulations obtained without residue, to establish a comparison on physical, mechanical and electrical. The tests were conducted and technology: linear shrinkage, porosity, water absorption, resistance to bending to three points, measuring insulation resistance electrical resistivity of the material, X-ray diffraction and X-ray fluorescence Waste characterizations pointed to the existence of two phases: mullite and quartz phases are of great importance in the microstructure of the ceramic and this fact reveals a possibility for reuse in electrical porcelains. The mullite is an important constituent because it is a phase that makes it possible to increase the mechanical strength in addition to the body allows the use at high temperatures. The use of ceramic bodies residue fuses, proved feasible for application in electrical porcelain and the most significant results were obtained by the formulations with 25% waste and sintering at 1200°C

Formulação de bloco intertravado cerâmico com adição de resíduos urbanos e industriais

The production of waste from urban and industrial activities is one of the factors of environmental contamination and has aroused attention of the scientific community, in the sense of its reuse. On the other hand, the city of Salvador/Ba, with approximately 262 channels, responsible for storm water runoff, produces every year, by the intervention of cleaning and clearing channels, a significant volume of sediments (dredged mud), and thus an appropriate methodology for their final destination. This study aims to assess the influence of incorporation of these tailings in arrays of clay for production of interlocked block ceramic, also known as ceramic paver. All the raw materials from the metropolitan region of Salvador (RMS) were characterized by x-ray fluorescence, x-ray diffraction, thermal analysis (TG and TDA), particle size analysis and dilatometry. With the use of statistical experimental planning technique, ternary diagram was defined in the study region and the analyzed formulations. The specimens were prepared with dimensions of 60x20x5mm³, by uniaxial pressing of 30 MPa and after sintering at temperatures of 900°, 1000º and 1100ºC the technological properties were evaluated: linear shrinkage, water absorption, apparent porosity, apparent specifies mass, flexural rupture and module. For the uniaxial compression strength used cylindrical probe body with Ø 50 mm. The standard mass (MP) was prepared with 90% by weight of clay and 10% by weight of Channel sediment (SCP), not being verified significant variations in the properties of the final product. With the incorporation of 10% by weight of manganese residue (PFM) and 10% by weight of the Ceramic waste (RCB) in the mass default, in addition to adjusting the plasticity due to less waste clay content, provided increased linear firing shrinkage, due the significant concentration of K2O, forming liquid phase at low temperature, contributing to decreased porosity and mechanical resistance, being 92,5 MPa maximum compressive strength verified. After extract test leachate and soluble, the piece containing 10% of the PFM, was classified as non-hazardous and inert material according to NBR10004/04 ABNT. The results showed the feasibility on using waste, SCP, RCB and PFM clay mass, at temperatures above 900ºC, paver ceramic production, according to the specifications of the technical standards, so that to exceed the 10% of the PFM, it becomes imperative to conduct studies of environmental impacts

Estudo do resíduo fosfogesso na formulação de uma pasta para revestimento interno de edifícios

Universidade Federal do Rio Grande do Norte

Estudo da viabilidade do processo de reciclagem do material descartado do sistema Zirkonzanh® de produção de próteses dentárias

At present, the material of choice for performing aesthetic dental prosthetic work is in the ceramic. Among them, the ceramic base of stabilized zirconia with 3% yttria (3Y - TZP) stand out for having excellent physical and mechanical properties. During the machining of blocks of zirconia in the laboratory to prepare the various types of prostheses, much of the material is given off in the form of powder, which is subsequently discarded. The waste of this material results in financial loss, reflecting higher final cost treatment for patients, as well as damage to the environment, thanks to the processes involved in the manufacture and disposal of the ceramic. This research, pioneered the recycling of zirconium oxide powder obtained during milling of dental crowns and bridges, we highlight the social and environmental aspects and aims to establish a protocol for the reuse of waste (powder of zirconia Zirkonzahn® system) discarded to obtain a new block of compacted zirconia to maintain the same mechanical and microstructural properties of commercial high-cost imported material. To compare with the commercial material, samples were uniaxially (20 MPa) and isostatically (100 MPa), and its mechanical and microstructural characterization was performed through tests of density, porosity, dilatometry, X-ray diffraction (XRD), hardness, fracture toughness, resistance to fracture electron microscopy (SEM) and analysis of grain size. The results observed in the samples were isostatically pressed similiares those obtained with samples from the commercial material demonstrating the viability of the process

Extensão rural em Agroecologia como ferramenta para construção do conhecimento agroecológico no Amazonas baseada no diálogo de saberes.

As atividades de extensão realizadas no curso superior de tecnologia em agroecologia do IFAM tem o objetivo gerar um aprendizado em via de mão dupla, por meio do diálogo de saberes entre populações tradicionais do Amazonas e acadêmicos do curso de tecnologia em agroecologia do Instituto Federal do Amazonas. Para Isso, foram realizadas oficinas de reaproveitamento de alimentos na comunidade Lago do limão, município do Iranduba; e oficina de Plantas Alimentícias Não Convencionais na comunidade São João do Araçá, no município de Itacoatiara. Foram demonstradas as possibilidades de reaproveitar para alimentação, resíduos orgânicos e espécies alimentícias não convencionais. As duas atividades tiveram participação efetiva dos comunitários e permitiram aos acadêmicos a convivência com a realidade amazônica e a interação com os agricultores familiares e suas dificuldades e perspectivas de vida, contribuindo assim, para a formação com visão sistêmica, conforme preconiza a agroecologia.

Investigação experimental de permutadores de calor para aplicação em sistema de recuperação de energia térmica de veículos

Devido às normas ambientais atualmente em vigor que restringem a quantidade de gases poluentes emitidos para a atmosfera pelos automóveis, e também pela cada vez maior consciencialização para os problemas ambientais que o consumo de combustíveis fósseis acarreta, assim como devido ao cada vez mais elevado preço dos mesmos, os construtores automóveis têm como principal objectivo a redução do consumo do combustível e consequente diminuição de emissão de poluentes. Os sistemas de reaproveitamento da energia térmica desperdiçada nos motores de combustão interna (MCI), podem contribuir de forma significativa para o aumento da eficiência de conversão de energia em veículos equipados com MCI. O presente estudo é dedicado ao desenvolvimento de um sistema de recupereração desta energia desperdiçada, recorrendo ao ciclo de Rankine, com ênfase no desenvolvimento da montagem experimental, na avaliação do desempenho de diferentes geometrias de evaporador e no estudo das incertezas experimentais. Tendo em conta as várias restrições de projeto (compacidade, perda de carga e potência recuperada por unidade de volume) o presente trabalho permitiu identificar a geometria do evaporador mais adequada.

Fabrico híbrido em grande escala de materiais compósitos

As tecnologias de fabrico aditivo e subtrativo têm vindo a desenvolver-se no sentido de permitir a produção de peças com melhores rigor dimensional, características mecânicas, físicas e químicas, utilizando ainda materiais completamente novos desenvolvidos a pensar nos requisitos em determinadas aplicações. A fabricação híbrida, um processo que utiliza dois ou mais processos de fabrico com características diferentes na mesma unidade de fabrico aproveitando assim as vantagens de cada processo, tem vindo a aparecer como meio de melhorar a qualidade e complexidade dos produtos a serem desenvolvidos. O desenvolvimento de processos de grande escala tem também vindo a verificar-se, sendo estes uma ampliação e aplicação dos processos já existentes para a produção a uma escala maior. Os compósitos de matriz polimérica são os materiais em foco neste trabalho. Alguns polímeros derivam de fontes não renováveis como o petróleo, o que tem levado ao crescimento da indústria de reciclagem deste tipo de materiais para a sua reutilização. Acresce o facto de que a incorporação de resíduos industriais é vista como uma vantagem, quer em termos de custos, quer em termos de sustentabilidade. O presente trabalho teve com objetivo o desenvolvimento de tecnologias de fabricação híbrida, aplicadas a materiais compósitos provenientes, em parte, do reaproveitamento de resíduos industriais. Assim, foi desenvolvido um sistema de extrusão de grandes dimensões - um braço robot com uma extrusora acoplada no seu último eixo, com uma variante híbrida combinando extrusão e maquinação - uma máquina fresadora com uma extrusora acoplada na sua árvore (Eixo Z); e foram desenvolvidos materiais compósitos aplicando o reprocessamento com incorporação de resíduos, por forma a originar produtos de materiais reciclados, contribuindo para a conservação do ambiente. Foi efetuada a validação de um dos conceitos através do desenvolvimento de peças extrudidas com os materiais reciclados e posterior estudo de parâmetros de processamento que conduzem a melhores resultados em temos de geometria. Esta avaliação foi efetuada com recurso a técnicas de engenharia inversa. Foi possível identificar tendências que permitirão melhorar a aplicabilidade deste tipo de processos no fabrico de peças de grandes dimensões.

Criação de uma framework para desenvolvimento de sistemas de comunicação aumentativa e alternativa

Nesta dissertação descreve-se uma proposta de implementação de uma plataforma de desenvolvimento de Sistemas de Comunicação Aumentativa e Alternativa para programadores, com o objectivo de melhorar a produtividade e diminuir os tempos despendidos na implementação deste tipo de soluções. Esta proposta assenta numa estrutura composta por widgets configuráveis por código e integráveis em novas aplicações, numa filosofia de reaproveitamento de objectos e funcionalidades, permitindo ainda a uniformização da estrutura do código no desenvolvimento de softwares deste tipo. Esta plataforma pretende ainda dar flexibilidade aos programadores, através da possibilidade de introdução de novas funcionalidades e widgets, permitindo também que se testem novas abordagens ao software durante a investigação. A implementação em tecnologias open source independentes da plataforma, permitirá ainda utilizar os objectos deste toolkit em vários sistemas operativos. ABSTRACT: ln this master thesis we describe an implementation proposal for an Augmentative and Alternative Communication Framework for developers, with the objective of improves the productivity and reduces the implementation times for these types of solutions. This proposal is based on a customized widgets structure that can be integrated in new applications, with the purpose of reuse common features of these applications, also allowing standardize the code structure in this kind of software development. This framework intends to provide flexibility to programmers giving them the possibility of introduce new functionalities and widgets, allowing them to test new approaches during research. The implementation based on open-source technologies, platform independent, allows the use of this toolkit in several different operating systems.

Efeito do gesso agrícola sobre a fitotoxicidade de cobre em aveia.

A viticultura no Rio Grande do Sul faz uso de grande quantidade de fungicidas cúpricos, que ao se acumular no solo pode atingir níveis tóxicos às plantas. O gesso agrícola, subproduto das indústrias na produção de ácido fosfórico, é um resíduo abundante e alvo de estudo para reaproveitamento e descarte apropriado. O objetivo deste trabalho foi verificar o efeito do gesso na mitigação do cobre (Cu) na cultura da aveia e efeitos no solo.