Flexible high voltage pulsed power supply for plasma applications

Demands for delivering high instantaneous power in a compressed form (pulse shape) have widely increased during recent decades. The flexible shapes with variable pulse specifications offered by pulsed power have made it a practical and effective supply method for an extensive range of applications. In particular, the release of basic subatomic particles (i.e. electron, proton and neutron) in an atom (ionization process) and the synthesizing of molecules to form ions or other molecules are among those reactions that necessitate large amount of instantaneous power. In addition to the decomposition process, there have recently been requests for pulsed power in other areas such as in the combination of molecules (i.e. fusion, material joining), gessoes radiations (i.e. electron beams, laser, and radar), explosions (i.e. concrete recycling), wastewater, exhausted gas, and material surface treatments. These pulses are widely employed in the silent discharge process in all types of materials (including gas, fluid and solid); in some cases, to form the plasma and consequently accelerate the associated process. Due to this fast growing demand for pulsed power in industrial and environmental applications, the exigency of having more efficient and flexible pulse modulators is now receiving greater consideration. Sensitive applications, such as plasma fusion and laser guns also require more precisely produced repetitive pulses with a higher quality. Many research studies are being conducted in different areas that need a flexible pulse modulator to vary pulse features to investigate the influence of these variations on the application. In addition, there is the need to prevent the waste of a considerable amount of energy caused by the arc phenomena that frequently occur after the plasma process. The control over power flow during the supply process is a critical skill that enables the pulse supply to halt the supply process at any stage. Different pulse modulators which utilise different accumulation techniques including Marx Generators (MG), Magnetic Pulse Compressors (MPC), Pulse Forming Networks (PFN) and Multistage Blumlein Lines (MBL) are currently employed to supply a wide range of applications. Gas/Magnetic switching technologies (such as spark gap and hydrogen thyratron) have conventionally been used as switching devices in pulse modulator structures because of their high voltage ratings and considerably low rising times. However, they also suffer from serious drawbacks such as, their low efficiency, reliability and repetition rate, and also their short life span. Being bulky, heavy and expensive are the other disadvantages associated with these devices. Recently developed solid-state switching technology is an appropriate substitution for these switching devices due to the benefits they bring to the pulse supplies. Besides being compact, efficient, reasonable and reliable, and having a long life span, their high frequency switching skill allows repetitive operation of pulsed power supply. The main concerns in using solid-state transistors are the voltage rating and the rising time of available switches that, in some cases, cannot satisfy the application’s requirements. However, there are several power electronics configurations and techniques that make solid-state utilisation feasible for high voltage pulse generation. Therefore, the design and development of novel methods and topologies with higher efficiency and flexibility for pulsed power generators have been considered as the main scope of this research work. This aim is pursued through several innovative proposals that can be classified under the following two principal objectives. • To innovate and develop novel solid-state based topologies for pulsed power generation • To improve available technologies that have the potential to accommodate solid-state technology by revising, reconfiguring and adjusting their structure and control algorithms. The quest to distinguish novel topologies for a proper pulsed power production was begun with a deep and through review of conventional pulse generators and useful power electronics topologies. As a result of this study, it appears that efficiency and flexibility are the most significant demands of plasma applications that have not been met by state-of-the-art methods. Many solid-state based configurations were considered and simulated in order to evaluate their potential to be utilised in the pulsed power area. Parts of this literature review are documented in Chapter 1 of this thesis. Current source topologies demonstrate valuable advantages in supplying the loads with capacitive characteristics such as plasma applications. To investigate the influence of switching transients associated with solid-state devices on rise time of pulses, simulation based studies have been undertaken. A variable current source is considered to pump different current levels to a capacitive load, and it was evident that dissimilar dv/dts are produced at the output. Thereby, transient effects on pulse rising time are denied regarding the evidence acquired from this examination. A detailed report of this study is given in Chapter 6 of this thesis. This study inspired the design of a solid-state based topology that take advantage of both current and voltage sources. A series of switch-resistor-capacitor units at the output splits the produced voltage to lower levels, so it can be shared by the switches. A smart but complicated switching strategy is also designed to discharge the residual energy after each supply cycle. To prevent reverse power flow and to reduce the complexity of the control algorithm in this system, the resistors in common paths of units are substituted with diode rectifiers (switch-diode-capacitor). This modification not only gives the feasibility of stopping the load supply process to the supplier at any stage (and consequently saving energy), but also enables the converter to operate in a two-stroke mode with asymmetrical capacitors. The components’ determination and exchanging energy calculations are accomplished with respect to application specifications and demands. Both topologies were simply modelled and simulation studies have been carried out with the simplified models. Experimental assessments were also executed on implemented hardware and the approaches verified the initial analysis. Reports on details of both converters are thoroughly discussed in Chapters 2 and 3 of the thesis. Conventional MGs have been recently modified to use solid-state transistors (i.e. Insulated gate bipolar transistors) instead of magnetic/gas switching devices. Resistive insulators previously used in their structures are substituted by diode rectifiers to adjust MGs for a proper voltage sharing. However, despite utilizing solid-state technology in MGs configurations, further design and control amendments can still be made to achieve an improved performance with fewer components. Considering a number of charging techniques, resonant phenomenon is adopted in a proposal to charge the capacitors. In addition to charging the capacitors at twice the input voltage, triggering switches at the moment at which the conducted current through switches is zero significantly reduces the switching losses. Another configuration is also introduced in this research for Marx topology based on commutation circuits that use a current source to charge the capacitors. According to this design, diode-capacitor units, each including two Marx stages, are connected in cascade through solid-state devices and aggregate the voltages across the capacitors to produce a high voltage pulse. The polarity of voltage across one capacitor in each unit is reversed in an intermediate mode by connecting the commutation circuit to the capacitor. The insulation of input side from load side is provided in this topology by disconnecting the load from the current source during the supply process. Furthermore, the number of required fast switching devices in both designs is reduced to half of the number used in a conventional MG; they are replaced with slower switches (such as Thyristors) that need simpler driving modules. In addition, the contributing switches in discharging paths are decreased to half; this decrease leads to a reduction in conduction losses. Associated models are simulated, and hardware tests are performed to verify the validity of proposed topologies. Chapters 4, 5 and 7 of the thesis present all relevant analysis and approaches according to these topologies.

CAD/CAm-assisted breast reconstruction

The application of computer-aided design and manufacturing (CAD/CAM) techniques in the clinic is growing slowly but steadily. The ability to build patient-specific models based on medical imaging data offers major potential. In this work we report on the feasibility of employing laser scanning with CAD/CAM techniques to aid in breast reconstruction. A patient was imaged with laser scanning, an economical and facile method for creating an accurate digital representation of the breasts and surrounding tissues. The obtained model was used to fabricate a customized mould that was employed as an intra-operative aid for the surgeon performing autologous tissue reconstruction of the breast removed due to cancer. Furthermore, a solid breast model was derived from the imaged data and digitally processed for the fabrication of customized scaffolds for breast tissue engineering. To this end, a novel generic algorithm for creating porosity within a solid model was developed, using a finite element model as intermediate.

Regulating assisted reproductive technologies in Victoria : the impact of changing policy concerning the accessibility of in vitro fertilisation for preimplantation tissue-typing

On 1 January 2010, the Assisted Reproductive Treatment Act 2008 (Vic) came into force. The legislation was the outcome of a detailed review and consultation process undertaken by the Victorian Law Reform Commission. Arguably, the change to the regulatory framework represents a significant shift in policy compared to previous regulatory approaches on this topic in Victoria. This article considers the impact of the new legislation on eligibility for reproductive treatments, focusing on the accessibility of such services for the purpose of creating a “saviour sibling”. It also highlights the impact of the Victorian regulatory body’s decision to abolish its regulatory policies on preimplantation genetic diagnosis and preimplantation tissue-typing, concluding that the regulatory approach in relation to these latter issues is similar to other Australian jurisdictions where such practices are not addressed by a statutory framework.

Inhibition of guinea-pig renal [Na + K]-ATPase by normotensive human plasma : effects of a high sodium diet

The effect of plasma taken from normotensive humans, while on a low and high sodium diet, on [Na + K]-ATPase and 3H-ouabain binding was measured in tubules from guinea-pig kidneys. Plasma from the high sodium, compared to the low sodium, diet period: (a) inhibited [Na + K]-ATPase activity; (b) decreased 3H-ouabain affinity for binding sites; (c) increased the number of available 3H-ouabain binding sites; (d) decreased [Na + K]-ATPase turnover (activity/3H-ouabain binding sites). The inhibition of [Na + K]-ATPase suggests an increase in a (possible) natriuretic factor. The decreased affinity of 3H-ouabain binding suggests an endogenous ouabainoid, which may be the natriuretic factor.

Biomimetic tubular nanofiber mesh and platelet rich plasma-mediated delivery of BMP-7 for large bone defect regeneration.

There is a growing need for successful bone tissue engineering strategies and advanced biomaterials that mimic the structure and function of native tissues carry great promise. Successful bone repair approaches may include an osteoconductive scaffold, osteoinductive growth factors, cells with an osteogenic potential and capacity for graft vascularisation. To increase osteoinductivity of biomaterials, the local combination and delivery of growth factors has been developed. In the present study we investigated the osteogenic effects of calcium phosphate (CaP)-coated nanofiber mesh tube-mediated delivery of BMP-7 from a PRP matrix for the regeneration of critical sized segmental bone defects in a small animal model. Bilateral full-thickness diaphyseal segmental defects were created in twelve male Lewis rats and nanofiber mesh tubes were placed around the defect. Defects received either treatment with a CaP-coated nanofiber mesh tube (n = 6), an un-coated nanofiber mesh tube (n=6) a CaP-coated nanofiber mesh tube with PRP (n=6) or a CaP-coated nanofiber mesh tube in combination with 5 μg BMP-7 and PRP (n = 6). After 12 weeks, bone volume and biomechanical properties were evaluated using radiography, microCT, biomechanical testing and histology. The results demonstrated significantly higher biomechanical properties and bone volume for the BMP group compared to the control groups. These results were supported by the histological evaluations, where BMP group showed the highest rate of bone regeneration within the defect. In conclusion, BMP-7 delivery via PRP enhanced functional bone defect regeneration, and together these data support the use of BMP-7 in the treatment of critical sized defects.

A mass spectrometric assay for the quantification of neuropeptide PYY in plasma

A multiple reaction monitoring mass spectrometric assay for the quantification of PYY in human plasma has been developed. A two stage sample preparation protocol was employed in which plasma containing the full length neuropeptide was first digested using trypsin, followed by solid-phase extraction to extract the digested peptide from the complex plasma matrix. The peptide extracts were analysed by LC-MS using multiple reaction monitoring to detect and quantify PYY. The method has been validated for plasma samples, yielding linear responses over the range 5–1,000 ng mL−1. The method is rapid, robust and specific for plasma PYY detection.

Anticipating the use of life extension technologies : possible pointers from the adoption of assisted reproductive technologies

The first effective life extension technologies might well become available within the next few years. Experts from the University of Queensland, Australia, explore the possible public reaction to these therapies and the ethical and social concerns they raise, drawing on the experience of assisted reproduction technologies

Birth outcomes after spontaneous or assisted conception among infertile Australian women aged 28 to 36 years: A prospective, population-based study

Objective To examine the extent to which the odds of birth, pregnancy, or adverse birth outcomes are higher among women aged 28 to 36 years who use fertility treatment compared with untreated women. Design Prospective, population-based. Setting Not applicable. Patient(s) Participants in the ALSWH born in 1973 to 1978 who reported on their infertility and use of in vitro fertilization (IVF) or ovulation induction (OI). Intervention(s) Postal survey questionnaires administered as part of ALSWH. Main Outcome Measure(s) Among women treated with IVF or OI and untreated women, the odds of birth outcomes estimated by use of adjusted logistic regression modeling. Result(s) Among 7,280 women, 18.6% (n = 1,376) reported infertility. Half (53.0%) of the treated women gave birth compared with 43.8% of untreated women. Women with prior parity were less likely to use IVF compared with nulliparous women. Women using IVF or OI, respectively, were more likely to have given birth after treatment or be pregnant compared with untreated women. Women using IVF or OI were as likely to have ectopic pregnancies, stillbirths, or premature or low birthweight babies as untreated women. Conclusion(s) More than 40% of women aged 28–36 years reporting a history of infertility can achieve births without using treatment, indicating they are subfertile rather than infertile.

Studies of assisted reproduction in the spotted grass frog Limnodynastes tasmaniensis: ovulation, early development and microinjection (ICSI)

Assisted Reproductive Technologies (ART) offer a wide range of techniques that have the potential to augment efforts to conserve and manage endangered amphibians and improve wild and captive population numbers. Gametes and tissues of species nearing endangered or extinct status can be cryopreserved and stored in gene banks, to provide material that can be utilised in the future as ART methods are refined. The Spotted Grass Frog, Limnodynastes tasmaniensis, is an abundant amphibian species in South-Eastern Australia of the family Myobatrachidae, that is suitable for the development of ART systems that can be applied to the threatened and endangered myobatrachid and other amphibian species native to Australia. The aim of this study was to advance the understanding of ovulation, fertilisation and embryo nic development of Lim. tasmaniensis and in vitro manipulations of reproduction and development for use in the development of advanced ART procedures such as intracytoplasmic spermatozoon injection (ICSI), androgenesis and nuclear transfer. Ovulation in amphibians can be induced by protocols utilising natural or synthetic hormones. All protocols tested on Lim. tasmaniensis in this study required two injections and the most effective protocols continued to require a first injection of pituitary extracts to induce ovulation. The second injection was, however, successfully replaced by synthetic chorionic gonadotrophin at a threshold dosage of 100 iu and halved the number of cane toads required to source the pituitaries. A combination of LHRH and Pimozide offered a less effective protocol, that did not require the use of pituitary extracts, and avoided the risk of pathogen transfer associated with unsterilised pituitary extracts. Unfertilised eggs of Lim. tasmaniensis were exposed to media of various osmolalities to determine media effects on eggs and their surrounding jelly layers that might impact on egg viability and fertilisability. Osmolality had no effect upon the egg diameter, however, rapid swelling of the jelly layers occurred within 15 minutes of exposure to various media treatments and plateaued from 30-90 minutes without further expansion. Swelling of the jelly layers was increased in hypotonic media (2.5% SAR, H2O) and minimised in the isotonic media (100% SAR). The optimal conditions for the culture of Lim. tasmaniensis eggs were identified as a holding media of 100% SAR, followed by a medium change to 2.5% SAR at insemination. This sequence of media minimised the rate of swelling of the jelly layers prior to contact with the spermatozoa, and maximised the activation of spermatozoa and eggs throughout fertilisation and embryonic development. Embryos of Lim. tasmaniensis were cultured at four temperatures (13 C, 17 C, 23 C and 29 C), to determine the effect of temperature on cleavage and embryonic development rates. Embryonic development progressed through a sequence of stages that were not altered by changes in temperature. However cleavage rates were affected by changes in temperature as compared with normal embryonic growth at 23 C. Embryonic development was suspended at the lowest temperature (13 C) while embryonic viability was maintained. A moderate decrease in temperature (17 C) slowed cleavage, while the highest temperature (29 C) increased the cleavage rate, but decreased the embryo survival. Rates of embryonic development can be manipulated by changes in temperature and this method can be used to source blastomeres of a specific size/stage at a predetermined age or halt cleavage at specific stages for embryos or embryo derived cells to be included in ART procedures. This study produced the first report of the application of Intracytoplasmic Spermatozoon Injection (ICSI) in an Australian amphibian. Eggs that were activated by microinjection with a single spermatozoon (n=50) formed more deep, but abnormal, cleavage furrows post-injection (18/50, 36%), than surface changes (12/50, 24%). This result is in contrast to eggs injected without a spermatozoon (n=42), where the majority of eggs displayed limited surface changes (36/42, 86%), and few deep, abnormal furrows (3/42, 7%). Three advanced embryos (3/50, 6%) were produced by ICSI that developed to various stages within the culture system. Technical difficulties were encountered that prevented the generation of any metamorphs from ICSI tadpoles. Nevertheless, when these blocks to ICSI are overcome, the ICSI procedure will be both directly useful as an ART procedure in its own right, and the associated refinement of micromanipulation procedures will assist in the development of other ART procedures in Lim. tasmaniensis. A greater understanding of basic reproductive and developmental biology in Lim. tasmaniensis would greatly facilitate refinement of fertilisation by ICSI. Assisted Reproductive Technologies, in conjunction with gene banks may in the future regenerate extinct amphibian species, and assist in the recovery of declining amphibian populations nationally and worldwide.

How should Australia regulate voluntary euthanasia and assisted suicide?

The purpose of this paper is to provide a basis from which to start an informed and rational dialogue in Australia about voluntary euthanasia (VE) and assisted suicide (AS). It does this by seeking to chart the broad landscape of issues that can be raised as relevant to how this conduct should be regulated by the law. It is not our purpose to persuade. Rather, we have attempted to address the issues as neutrally as possible and to canvass both sides of the argument in an even-handed manner. We hope that this exercise places the reader in a position to consider the question posed by this paper: How should Australia regulate voluntary euthanasia and assisted suicide? In line with the approach taken in the paper, this question does not take sides in the debate. It simply asks how VE and AS should be regulated, acknowledging that both prohibition and legalisation of such conduct involve regulation. We begin by considering the wider legal framework that governs end of life decision-making. Decisions to withhold or withdraw life-sustaining treatment that result in a person’s death can be lawful. This could be because, for example, a competent adult refuses such treatment. Alternatively, stopping or not providing treatment can be lawful when it is no longer in a person’s best interests to receive it. The law also recognises that appropriate palliative care should not attract criminal responsibility. By contrast, VE and AS are unlawful in Australia and could lead to prosecution for crimes such as murder, manslaughter or aiding and abetting suicide. But this is not to say that such conduct does not occur in practice. Indeed, there is a body of evidence that VE and AS occur in Australia, despite them being unlawful. There have been repeated efforts to change the law in this country, mainly by the minor political parties. However, apart from a brief period when VE and AS was lawful in the Northern Territory, these attempts to reform the law have been unsuccessful. The position is different in a small but increasing number of jurisdictions overseas where such conduct is lawful. The most well known is the Netherlands but there are also statutory regimes that regulate VE and/or AS in Belgium and Luxembourg in Europe, and Oregon and Washington in the United States. A feature of these legislative models is that they incorporate review or oversight processes that enable the collection of data about how the law is being used. As a result, there is a significant body of evidence that is available for consideration to assess the operation of the law in these jurisdictions and some of this is considered briefly here. Assisting a suicide, if done for selfless motives, is also legal in Switzerland, and this has resulted in what has been referred to as ‘euthanasia tourism’. This model is also considered. The paper also identifies the major arguments in favour of, and against, legalisation of VE and AS. Arguments often advanced in favour of law reform include respect for autonomy, that public opinion favours reform, and that the current law is incoherent and discriminatory. Key arguments against legalising VE and AS point to the sanctity of life, concerns about the adequacy and effectiveness of safeguards, and a ‘slippery slope’ that will allow euthanasia to occur for minors or for adults where it is not voluntary. We have also attempted to step beyond these well trodden and often rehearsed cases ‘for and against’. To this end, we have identified some ethical values that might span both sides of the debate and perhaps be the subject of wider consensus. We then outline a framework for considering the issue of how Australia should regulate VE and AS. We begin by asking whether such conduct should be criminal acts (as they presently are). If VE and AS should continue to attract criminal responsibility, the next step is to enquire whether the law should punish such conduct more or less than is presently the case, or whether the law should stay the same. If a change is favoured as to how the criminal law punishes VE and AS, options considered include sentencing reform, creating context-specific offences or developing prosecutorial guidelines for how the criminal justice system deals with these issues. If VE and AS should not be criminal acts, then questions arise as to how and when they should be permitted and regulated. Possible elements of any reform model include: ensuring decision-making is competent and voluntary; ascertaining a person’s eligibility to utilise the regime, for example, whether it depends on him or her having a terminal illness or experiencing pain and suffering; and setting out processes for how any decision must be made and evidenced. Options to bring about decriminalisation include challenging the validity of laws that make VE and AS unlawful, recognising a defence to criminal prosecution, or creating a statutory framework to regulate the practice. We conclude the paper where we started: with a call for rational and informed consideration of a difficult and sensitive issue. How should Australia regulate voluntary euthanasia and assisted suicide?

How should Australia regulate voluntary euthanasia and assisted suicide?

This paper invites consideration of how Australia should regulate voluntary euthanasia and assisted suicide. We have attempted to pose this question as neutrally as possible, acknowledging that both prohibition and legalisation of such conduct involve decisions about regulation. We begin by charting the wider field of law at the end of life, before considering the repeated, but ultimately unsuccessful, attempts at law reform in Australia. The situation in Australia is contrasted with permissive jurisdictions overseas where voluntary euthanasia and/or assisted suicide are lawful. We consider the arguments for and against legalisation of such conduct along with the available empirical evidence as to what happens in practice both in Australia and overseas. The paper concludes by outlining a framework for deliberating on how Australia should regulate voluntary euthanasia and assisted suicide. We ask a threshold question of whether such conduct should be criminal acts (as they presently are), the answer to which then leads to a range of possible regulatory options.

Prosecutorial discretion in assisted dying in Canada : a proposal for charging guidelines

An Expert Panel of the Royal Society of Canada and a Select Committee of the Québec National Assembly both recently recommended the issuance of permissive guidelines for the exercise of prosecutorial discretion on voluntary euthanasia and assisted suicide and “medical aid in dying” respectively. It seems timely, therefore, to propose a set of offence-specific guidelines for how prosecutorial discretion should be exercised in cases of voluntary euthanasia and assisted suicide in Canadian provinces and territories. We take as our starting point the only existing guidelines of this sort currently in force in the world (i.e. the British Columbia Guidelines, and the England and Wales Guidelines). In light of certain concerns we have with these guidelines, we outline an approach to constructing guidelines for Canadian jurisdictions that begins with identifying three guiding principles we argue are appropriate for this purpose (respect for autonomy, the need for high-quality prosecutorial decision making, and the importance of public confidence in that decision making), and ends with a concrete and detailed set of proposed guidelines. The paper is consistent with, but also extends, the work of the Royal Society of Canada Expert Panel on End of Life Decision Making. Un panel d’expert de la Société Royale du Canada et une Commission spéciale de l’Assemblée nationale du Québec ont tous les deux récemment recommandé que soit émises des directives permettant exercice d’un pouvoir de poursuite discrétionnaire concernant l’euthanasie et le suicide assisté et « l’assistance médicale pour mourir », respectivement. Il semble donc à propos de proposer une série de directives spécifiques aux offenses sur la façon dont le pouvoir de poursuite discrétionnaire dans les territoires et provinces canadiennes serait appliqué dans les cas d’euthanasie et de suicide assisté. Nous avons pris comme point de départ les seules directives de la sorte existant déjà (c’est-à-dire celle de la Colombie-Britannique et de l’Angleterre et du Pays de Galles). Par contre, compte tenu de certaines de nos réserves concernant ces directives, nous avons ensuite établi les grandes lignes d’une approche permettant de mettre sur pied des directives pour les juridictions canadiennes, qui débute par l’identification de trois principes de base qui sont selon nous appropriées à cette fin (respect de l’autonomie, besoin pour une grande qualité de prise de prise de décision du poursuivant et la confiance du public envers cette prise de décision) pour se terminer par une série de directives concrètes et détaillées. Le présent document est compatible avec le travail de la Société royale du Canada tout en en augmentant la portée.