Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104

Avaliação da soldagem GMAW mecanizada e automatizada para união de dutos utilizando fontes convencional e com controle de curto- circuito

Welding is one of the most employed process for joining steel pipes. Although, manual welding is still the most used one, mechanized version and even automatized one have increased its demand. Thus, this work deals with girth welding of API 5L X65 pipes with 8” of nominal diameter and 8.0 mm thickness, beveled with V-30º narrow gap. Torch is moved by a bug carrier (mechanized welding) and further the parameters are controlled as a function of angular position (automatized welding). Welding parameters are presented for filling the joint with two-passes (root and filling/capping passes). Parameters for the root pass were extracted from previous author´s work with weldments carried out in plates, but validated in this work for pipe welding. GMAW processes were assessed with short-circuit metal transfer in both conventional and derivative modes using different technologies (RMD, STT and CMT). After the parameter determination, mechanical testing was performed for welding qualification (uniaxial tension, face and root bending, nick break, Charpy V-notch impact, microhardness and macrograph). The initially obtained results for RMD and CMT were acceptable for all testing and, in a second moment, also for the STT. However, weld beads carried out by using the conventional process failed and revealed the existence of lack of fusion, which required further parametrization. Thus, a Parameter-Variation System for Girth Welding (SVP) was designed and built to allow varying the welding parameters as a function of angular position by using an inclinometer. The parameters were set for each of the three angular positions (flat, vertical downhill and overhead). By using such equipment and approach, the conventional process with parameter variation allowed reducing the welding time for joint accomplishment of the order of 38% for the root pass and 30% for the filling/capping pass.

Resistance to colistin : what is the fate for this antibiotic in pig production?

Colistin, a cationic polypeptide antibiotic, has reappeared in human medicine as a last-line treatment option for multidrug-resistant Gram-negative bacteria (MDR-GNB). Colistin is widely used in veterinary medicine for the treatment of gastrointestinal infections caused by Enterobacteriaceae. GNB resistant to colistin owing to chromosomal mutations have already been reported both in human and veterinary medicine, however several recent studies have just identified a plasmid-mediated mcr-1 gene encoding for colistin resistance in Escherichia coli colistin resistance. The discovery of a non-chromosomal mechanism of colistin resistance in E. coli has led to strong reactions in the scientific community and to concern among physicians and veterinarians. Colistin use in food animals and particularly in pig production has been singled out as responsible for the emergence of colistin resistance. The present review will focus mainly on the possible link between colistin use in pigs and the spread of colistin resistance in Enterobacteriaceae. First we demonstrate a possible link between Enterobacteriaceae resistance emergence and oral colistin pharmacokinetics/pharmacodynamics and its administration modalities in pigs. We then discuss the potential impact of colistin use in pigs on public health with respect to resistance. We believe that colistin use in pig production should be re-evaluated and its dosing and usage optimised. Moreover, the search for competitive alternatives to using colistin with swine is of paramount importance to preserve the effectiveness of this antibiotic for the treatment of MDR-GNB infections in human medicine.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

Resistance to colistin : what is the fate for this antibiotic in pig production?

Colistin, a cationic polypeptide antibiotic, has reappeared in human medicine as a last-line treatment option for multidrug-resistant Gram-negative bacteria (MDR-GNB). Colistin is widely used in veterinary medicine for the treatment of gastrointestinal infections caused by Enterobacteriaceae. GNB resistant to colistin owing to chromosomal mutations have already been reported both in human and veterinary medicine, however several recent studies have just identified a plasmid-mediated mcr-1 gene encoding for colistin resistance in Escherichia coli colistin resistance. The discovery of a non-chromosomal mechanism of colistin resistance in E. coli has led to strong reactions in the scientific community and to concern among physicians and veterinarians. Colistin use in food animals and particularly in pig production has been singled out as responsible for the emergence of colistin resistance. The present review will focus mainly on the possible link between colistin use in pigs and the spread of colistin resistance in Enterobacteriaceae. First we demonstrate a possible link between Enterobacteriaceae resistance emergence and oral colistin pharmacokinetics/pharmacodynamics and its administration modalities in pigs. We then discuss the potential impact of colistin use in pigs on public health with respect to resistance. We believe that colistin use in pig production should be re-evaluated and its dosing and usage optimised. Moreover, the search for competitive alternatives to using colistin with swine is of paramount importance to preserve the effectiveness of this antibiotic for the treatment of MDR-GNB infections in human medicine.

Impact of mash feeding versus pellets on propionic/butyric acid levels and on total Escherichia coli load in the gastrointestinal tract of growing pigs

Feed characteristics may influence the bacterial community composition and metabolic activities in the pig gastrointestinal tract, known to be associated with positive effects on the gut. Use of mash feed is associated with reduced Salmonella excretion, but little is known of its effect on the Escherichia coli population or of the mechanism of action. Our objectives were to assess the effect of feed texture combined with feed particle size on VFA profiles and levels, total E. coli count, and the presence of genes encoding virulence factors of pathogenic E. coli strains in the digestive tract along with their impact on pig performance of fattening pigs. Pigs (n = 840) on a commercial farm received mash or pellet diets of different particle sizes during the fattening period. Caecal and colon contents from 164 pigs were sampled at the slaughterhouse for enumeration of E. coli by quantitative PCR (qPCR) and for VFA quantification by capillary gas chromatography. The yccT gene was used to enumerate total E. coli. Improved pig performances associated with pellet texture and a 500-μm size were observed. Caecal (P = 0.02) and colon (P < 0.01) propionic acid concentrations were lower for pigs receiving pellet rather than mash feed. Similarly, caecal (P = 0.01) and colon (P < 0.001) butyric acid concentrations were also lower for pigs receiving pellet rather than mash feed, as determined by capillary gas chromatography. Moreover, caecal (P = 0.03) and colon (P < 0.001) butyric acid concentrations were higher for pigs receiving a feed with a 1,250-μm particle size rather than a 500-μm particle size. On the other hand, total caecal and colon E. coli levels were higher for pigs receiving pellet feed than for those receiving mash feed. For total E. coli enumeration, caecal (P < 0.01) and colon (P < 0.01) yccT gene copies were higher for pigs receiving pellet rather than mash feed. No effect of particle size on fatty acid concentrations or on E. coli numbers was observed. Virulence gene quantification revealed no trend. Taken together, results showed that mash feed is associated with lower growth performance but with favorable intestinal changes linked to VFA levels and E. coli reduction in the intestine.

Molecular characterization of extended-spectrum cephalosporin-resistance in Escherichia coli in pigs on-farm and from clinical cases throughout Quebec, Canada during 16 years

Le développement de la multirésistance chez Escherichia coli est un problème important en médecine animale et humaine. En outre, l’émergence et la diffusion des déterminants de résistance aux céphalosporines à larges spectres de troisième génération (ESCs) parmi les isolats, incluant des céphalosporines essentielles en médecine humaine (ex. ceftriaxone et ceftiofur), est un problème majeur de santé publique. Cette thèse visait trois objectifs. D’abord étudier la dynamique de la résistance aux antimicrobiens (AMR) ainsi que la virulence et les profils génétiques de la AMR des E. coli isolées de porcs recevant une nourriture post-sevrage supplémentée avec de la chlortétracycline et de la pénicilline G, et, accessoirement, évaluer les effets d'additifs alimentaires sur cette dynamique en prenant pour exemple d'étude un minéral argileux, la clinoptilolite, étant donné son possible lien avec le gène blaCMY-2 qui confère la résistance au ceftiofur. L'objectif suivant était d'investiguer les mécanismes menant à une augmentation de la prévalence du gène blaCMY-2 chez les porcs qui reçoivent de la nourriture médicamentée et qui n'ont pas été exposés au ceftiofur Ici encore,nous avons examiné les effets d’un supplément alimentaire avec un minéral argileux sur ce phénomène. Enfin, notre dernier objectif était d’étudier, dans le temps, les génotypes des isolats cliniques d'E. coli résistant au ceftiofur, isolés de porcs malades au Québec à partir du moment où la résistance au ceftiofur a été rapportée, soit de 1997 jusqu'à 2012. Dans l'étude initiale, la prévalence de la résistance à 10 agents antimicrobiens, incluant le ceftiofur, s’accroît avec le temps chez les E.coli isolées de porcelets sevrés. Une augmentation tardive de la fréquence du gène blaCMY-2, encodant pour la résistance au ceftiofur, et la présence des gènes de virulence iucD et tsh a été observée chez les isolats. La nourriture supplémentée avec de la clinoptilolite a été associée à une augmentation rapide mais, par la suite, à une diminution de la fréquence des gènes blaCMY-2 dans les isolats. En parallèle, une augmentation tardive dans la fréquence des gènes blaCMY-2 et des gènes de virulence iucD et tsh a été observée dans les isolats des porcs contrôles, étant significativement plus élevé que dans les porcs ayant reçu l'additif au jour 28. La diversité, au sein des E. coli positives pour blaCMY-2 , a été observée au regard des profils AMR. Certaines lignées clonales d'E.coli sont devenues prédominantes avec le temps. La lignée clonale du phylotype A prédominait dans le groupe supplémenté, alors que les lignées clonales du phylotype B1, qui possèdent souvent le gène de virulence iucD associé aux ExPEC, prédominaient dans le groupe contrôle. Les plasmides d'incompatibilité (Inc) des groupes, I1, A/C, et ColE, porteurs de blaCMY-2, ont été observés dans les transformants. Parmi les souches cliniques d'E.coli ESC-résistantes, isolées de porcs malades au Québec de 1997 à 2012, blaCMY-2 était le gène codant pour une β-lactamase le plus fréquemment détecté; suivi par blaTEM et blaCTX-M,. De plus, les analyses clonales montrent une grande diversité génétique. Par contre, des isolats d'E. coli avec des profils PFGE identiques ont été retrouvés dans de multiples fermes la même année mais aussi dans des années différentes. La résistance à la gentamicine, kanamycine, chloramphenicol, et la fréquence de blaTEM et de IncA/C diminuent significativement au cour de la période étudiée, alors que la fréquence de IncI1 et de la multirésistance à sept catégories d'agents antimicrobiens augmente significativement avec le temps. L'émergence d'isolats d'E. coli positifs pour blaCTX-M, une β-lactamase à large spectre et produisant des ESBL, a été observée en 2011 et 2012 à partir de lignées clonales distinctes et chez de nombreuses fermes. Ces résultats, mis ensemble, apportent des précisions sur la dissémination de la résistance au ceftiofur dans les E. coli isolées de porcs. Au sein des échantillons prélevés chez les porcs sevrés recevant l'alimentation médicamentée sur une ferme, et pour laquelle une augmentation de la résistance au ceftiofur a été observée, les données révèlent que les souches d'E. coli positives pour blaCMY-2 et résistantes aux ESCs appartenaient à plusieurs lignées clonales différentes arborant divers profils AMR. Le gène blaCMY-2 se répand à la fois horizontalement et clonalement chez ces E. coli. L'ajout de clinoptilotite à la nourriture et le temps après le sevrage influencent la clonalité et la prévalence du gène blaCMY-2 dans les E. coli. Durant les 16 années d'étude, plusieurs lignées clonales différentes ont été observées parmi les souches d'E. coli résistantes au ceftiofur isolées de porc malades de fermes québécoises, bien qu’aucune lignée n'était persistante ou prédominante pendant l'étude. Les résultats suggèrent aussi que le gène blaCMY-2 s'est répandu à la fois horizontalement et clonalement au sein des fermes. De plus, blaCMY-2 est le gène majeur des β-lactamases chez ces isolats. À partir de 2011, nous rapportons l'émergence du gène blaCTX-M dans des lignées génétiques distinctes.

Validation of PigBal model predictions for pig manure production

PigBal is a mass balance model that uses pig diet, digestibility and production data to predict the manure solids and nutrients produced by pig herds. It has been widely used for designing piggery effluent treatment systems and sustainable reuse areas at Australian piggeries. More recently, PigBal has also been used to estimate piggery volatile solids production for assessing greenhouse gas emissions for statutory reporting purposes by government, and for evaluating the energy potential from anaerobic digestion of pig effluent. This paper has compared PigBal predictions of manure total, volatile, and fixed solids, and nitrogen (N), phosphorus (P) and potassium (K), with manure production data generated in a replicated trial, which involved collecting manure from pigs housed in metabolic pens. Predictions of total, volatile, and fixed solids and K in the excreted manure were relatively good (combined diet R2 ≥ 0.79, modelling efficiency (EF) ≥ 0.70) whereas predictions of N and P, were generally less accurate (combined diet R2 0.56 and 0.66, EF 0.19 and –0.22, respectively). PigBal generally under-predicted lower N values while over-predicting higher values, and generally over-predicted manure P production for all diets. The most likely causes for this less accurate performance were ammonium-N volatilisation losses between manure excretion and sample analysis, and the inability of PigBal to account for higher rates of P uptake by pigs fed diets containing phytase. The outcomes of this research suggest that there is a need for further investigation and model development to enhance PigBal’s capabilities for more accurately assessing nutrient loads. However, PigBal’s satisfactory performance in predicting solids excretion demonstrates that it is suitable for assessing the methane component of greenhouse gas emission and the energy potential from anaerobic digestion of volatile solids in piggery effluent. The apparent overestimation of N and P excretion may result in conservative nutrient application rates to land and the over-prediction of the nitrous oxide component of greenhouse gas emissions.

Validation of PigBal model predictions for pig manure production

PigBal is a mass balance model that uses pig diet, digestibility and production data to predict the manure solids and nutrients produced by pig herds. It has been widely used for designing piggery effluent treatment systems and sustainable reuse areas at Australian piggeries. More recently, PigBal has also been used to estimate piggery volatile solids production for assessing greenhouse gas emissions for statutory reporting purposes by government, and for evaluating the energy potential from anaerobic digestion of pig effluent. This paper has compared PigBal predictions of manure total, volatile, and fixed solids, and nitrogen (N), phosphorus (P) and potassium (K), with manure production data generated in a replicated trial, which involved collecting manure from pigs housed in metabolic pens. Predictions of total, volatile, and fixed solids and K in the excreted manure were relatively good (combined diet R2 ≥ 0.79, modelling efficiency (EF) ≥ 0.70) whereas predictions of N and P, were generally less accurate (combined diet R2 0.56 and 0.66, EF 0.19 and -0.22, respectively). PigBal generally under-predicted lower N values while over-predicting higher values, and generally over-predicted manure P production for all diets. The most likely causes for this less accurate performance were ammonium-N volatilisation losses between manure excretion and sample analysis, and the inability of PigBal to account for higher rates of P uptake by pigs fed diets containing phytase. The outcomes of this research suggest that there is a need for further investigation and model development to enhance PigBal's capabilities for more accurately assessing nutrient loads. However, PigBal's satisfactory performance in predicting solids excretion demonstrates that it is suitable for assessing the methane component of greenhouse gas emission and the energy potential from anaerobic digestion of volatile solids in piggery effluent. The apparent overestimation of N and P excretion may result in conservative nutrient application rates to land and the over-prediction of the nitrous oxide component of greenhouse gas emissions. © CSIRO 2016.

In vivo and in vitro disappearance of energy and nutrients in novel carbohydrates and cereal grains by pigs

In vivo and in vitro experiments were conducted to determine digestibility of GE and nutrients, as well as DE and ME of carbohydrates fed to growing pigs. The objective of Exp. 1 was to determine the DE and ME of 4 novel carbohydrates fed to pigs. The 4 novel carbohydrates were 2 sources of resistant starch (RS 60 and RS 70), soluble corn fiber (SCF), and pullulan. These carbohydrates were produced to increase total dietary fiber (TDF) intake by humans. Maltodextrin (MD) was used as a highly digestible control carbohydrate. The DE and ME for RS 60 (1,779 and 1,903 kcal/kg, respectively), RS 75(1,784 and 1,677 kcal/kg, respectively), and SCF (1,936 and 1,712 kcal/kg, respectively) were less (P < 0.05) than for MD (3,465 and 3,344 kcal/kg, respectively) and pullulan (2,755 and 2,766 kcal/kg, respectively), and pullulan contained less (P < 0.05) DE and ME than MD. However, there was no difference in the DE and ME for RS 60, RS 75, and SCF. The varying degrees of small intestinal digestibility and differences in fermentability among these novel carbohydrates may explain the differences in the DE and ME among carbohydrates. Therefore, the objectives of Exp. 2 were to determine the effect of these 4 novel carbohydrates and cellulose on apparent ileal (AID) and apparent total tract (ATTD) disappearance, and hindgut disappearance (HGD) of GE, TDF, and nutrients when added to diets fed to ileal-cannulated pigs. The second objective was to measure the endogenous flow of TDF to be able to calculate the standardized ileal disappearance (SID) and standardized total tract (STTD) disappearance of TDF in the 4 novel fibers fed to pigs. Results of the experiment indicated that the AID of GE and DM in diets containing cellulose or the novel fibers was less (P < 0.05) than of the maltodextrin diet, but the ATTD of GE and DM was not different among diets. The addition of RS 60, RS 75, and SCF did not affect the AID of acid hydrolysed ether extract (AEE), CP, or ash, but the addition of cellulose and pullulan reduced (P < 0.01) the AID of CP. The average ileal and total tract endogenous losses of TDF were calculated to be 25.25 and 42.87 g/kg DMI, respectively. The SID of TDF in diets containing RS 60, SCF, and pullulan were greater (P < 0.01) than the SID of TDF in the cellulose diet, but the STTD of the SCF diet was greater (P < 0.05) than for the cellulose and pullulan diets. Results of this experiment indicate that the presence of TDF reduces small intestinal disappearance of total carbohydrates and energy which may reduce the DE and ME of diets and ingredients. Therefore, the objective of Exp. 3 was to determine the DE and ME in yellow dent corn, Nutridense corn, dehulled barley, dehulled oats, polished rice, rye, sorghum, and wheat fed to growing pigs and to determine the AID and ATTD of GE, OM, CP, AEE, starch, total carbohydrates, and TDF in these cereal grains fed to pigs. Results indicated that the AID of GE, OM, and total carbohydrates was greater (P < 0.001) in rice than in all other cereal grains. The AID of starch was also greater (P < 0.001) in rice than in yellow dent corn, dehulled barley, rye, and wheat. The ATTD of GE was greater (P < 0.001) in rice than in yellow dent corn, rye, sorghum, and wheat. With a few exceptions, the AID and ATTD of GE and nutrients in Nutridense corn was not different from the values for dehulled oats. Likewise, with a few exceptions, the AID, ATTD, and HGD of GE, OM, total carbohydrates, and TDF in yellow corn, sorghum, and wheat were not different from each other. The AID of GE and AEE in dehulled barley was greater (P < 0.001) than in rye. The ATTD of GE and most nutrients was greater (P < 0.001) in dehulled barley than in rye. Dehulled oats had the greatest (P < 0.001) ME (kcal/kg DM) whereas rye had the least ME (kcal/kg DM) among the cereal grains. Results of the experiment indicate that the presence of TDF and RS may reduce small intestinal digestibility of starch in cereal grains resulting in reduced DE and ME in these grains. Digestibility experiments involving animals are time consuming and expensive. Therefore, the objective of Exp. 4 was to correlate DM and OM digestibility obtained from 3 in vitro procedures with ATTD of GE and with the concentration of DE in 50 corn samples that were fed to growing pigs. The second objective was to develop a regression model that can predict the ATTD of GE or the concentration of DE in corn. The third objective was to evaluate the suitability of using the DaisyII incubator as an alternative to the traditional water bath when determining in vitro DM and OM digestibility. Results indicated that corn samples incubated with Viscozyme for 48 h in the DaisyII incubator improved (P < 0.001) the ability of the procedure to detect small differences in the ATTD of GE or to detect small differences in the concentration of DE in corn. Likewise, compared with using cellulase or fecal inoculum, the variability in the ATTD of GE and the variability in the DE in corn was better (R2 = 0.56; P < 0.05 and R2 = 0.53; P < 0.06, respectively) explained if Viscozyme was used than if cellulase or fecal inoculum was used. A validated regression model that predicted the DE in corn was developed using Viscozyme and with the corn samples incubated in the DaisyII incubator for a 48 h. In conclusion, this present work used the pig as a model for human gastrointestinal function and evaluates carbohydrates from 2 different nutritional perspectives – humans and animals. The addition of novel carbohydrates reduced the digestibility of energy in the diets without necessarily reducing the digestibility of other nutrients. Thus, supplementation of novel carbohydrates in the diets may be beneficial for the management of diabetes. Aside from diabetic management, cereal grains such as rye and sorghum, may also help in BW management because of there low caloric value, but for undernourished individuals, dehulled oats, dehulled barley, and rice are the ideal grains. From an animal nutrition standpoint, high concentration of dietary fiber is undesirable because it reduces feed efficiency. Therefore, the inclusion of feed ingredients that have a high concentration of dietary fiber is often limited in animal diets. Although in vivo determination is ideal, in vitro procedures are useful tools to determine caloric value of food and feed ingredients.

Molecular characterization of extended-spectrum cephalosporin-resistance in Escherichia coli in pigs on-farm and from clinical cases throughout Quebec, Canada during 16 years

Le développement de la multirésistance chez Escherichia coli est un problème important en médecine animale et humaine. En outre, l’émergence et la diffusion des déterminants de résistance aux céphalosporines à larges spectres de troisième génération (ESCs) parmi les isolats, incluant des céphalosporines essentielles en médecine humaine (ex. ceftriaxone et ceftiofur), est un problème majeur de santé publique. Cette thèse visait trois objectifs. D’abord étudier la dynamique de la résistance aux antimicrobiens (AMR) ainsi que la virulence et les profils génétiques de la AMR des E. coli isolées de porcs recevant une nourriture post-sevrage supplémentée avec de la chlortétracycline et de la pénicilline G, et, accessoirement, évaluer les effets d'additifs alimentaires sur cette dynamique en prenant pour exemple d'étude un minéral argileux, la clinoptilolite, étant donné son possible lien avec le gène blaCMY-2 qui confère la résistance au ceftiofur. L'objectif suivant était d'investiguer les mécanismes menant à une augmentation de la prévalence du gène blaCMY-2 chez les porcs qui reçoivent de la nourriture médicamentée et qui n'ont pas été exposés au ceftiofur Ici encore,nous avons examiné les effets d’un supplément alimentaire avec un minéral argileux sur ce phénomène. Enfin, notre dernier objectif était d’étudier, dans le temps, les génotypes des isolats cliniques d'E. coli résistant au ceftiofur, isolés de porcs malades au Québec à partir du moment où la résistance au ceftiofur a été rapportée, soit de 1997 jusqu'à 2012. Dans l'étude initiale, la prévalence de la résistance à 10 agents antimicrobiens, incluant le ceftiofur, s’accroît avec le temps chez les E.coli isolées de porcelets sevrés. Une augmentation tardive de la fréquence du gène blaCMY-2, encodant pour la résistance au ceftiofur, et la présence des gènes de virulence iucD et tsh a été observée chez les isolats. La nourriture supplémentée avec de la clinoptilolite a été associée à une augmentation rapide mais, par la suite, à une diminution de la fréquence des gènes blaCMY-2 dans les isolats. En parallèle, une augmentation tardive dans la fréquence des gènes blaCMY-2 et des gènes de virulence iucD et tsh a été observée dans les isolats des porcs contrôles, étant significativement plus élevé que dans les porcs ayant reçu l'additif au jour 28. La diversité, au sein des E. coli positives pour blaCMY-2 , a été observée au regard des profils AMR. Certaines lignées clonales d'E.coli sont devenues prédominantes avec le temps. La lignée clonale du phylotype A prédominait dans le groupe supplémenté, alors que les lignées clonales du phylotype B1, qui possèdent souvent le gène de virulence iucD associé aux ExPEC, prédominaient dans le groupe contrôle. Les plasmides d'incompatibilité (Inc) des groupes, I1, A/C, et ColE, porteurs de blaCMY-2, ont été observés dans les transformants. Parmi les souches cliniques d'E.coli ESC-résistantes, isolées de porcs malades au Québec de 1997 à 2012, blaCMY-2 était le gène codant pour une β-lactamase le plus fréquemment détecté; suivi par blaTEM et blaCTX-M,. De plus, les analyses clonales montrent une grande diversité génétique. Par contre, des isolats d'E. coli avec des profils PFGE identiques ont été retrouvés dans de multiples fermes la même année mais aussi dans des années différentes. La résistance à la gentamicine, kanamycine, chloramphenicol, et la fréquence de blaTEM et de IncA/C diminuent significativement au cour de la période étudiée, alors que la fréquence de IncI1 et de la multirésistance à sept catégories d'agents antimicrobiens augmente significativement avec le temps. L'émergence d'isolats d'E. coli positifs pour blaCTX-M, une β-lactamase à large spectre et produisant des ESBL, a été observée en 2011 et 2012 à partir de lignées clonales distinctes et chez de nombreuses fermes. Ces résultats, mis ensemble, apportent des précisions sur la dissémination de la résistance au ceftiofur dans les E. coli isolées de porcs. Au sein des échantillons prélevés chez les porcs sevrés recevant l'alimentation médicamentée sur une ferme, et pour laquelle une augmentation de la résistance au ceftiofur a été observée, les données révèlent que les souches d'E. coli positives pour blaCMY-2 et résistantes aux ESCs appartenaient à plusieurs lignées clonales différentes arborant divers profils AMR. Le gène blaCMY-2 se répand à la fois horizontalement et clonalement chez ces E. coli. L'ajout de clinoptilotite à la nourriture et le temps après le sevrage influencent la clonalité et la prévalence du gène blaCMY-2 dans les E. coli. Durant les 16 années d'étude, plusieurs lignées clonales différentes ont été observées parmi les souches d'E. coli résistantes au ceftiofur isolées de porc malades de fermes québécoises, bien qu’aucune lignée n'était persistante ou prédominante pendant l'étude. Les résultats suggèrent aussi que le gène blaCMY-2 s'est répandu à la fois horizontalement et clonalement au sein des fermes. De plus, blaCMY-2 est le gène majeur des β-lactamases chez ces isolats. À partir de 2011, nous rapportons l'émergence du gène blaCTX-M dans des lignées génétiques distinctes.

The effects of acute administration of Chinese aphrodisiacs sold in Blantyre City on sperm characteristics and fertility profile in guinea pigs

Background Chinese aphrodisiacs have become popular remedy for sexual dysfunction and improvement of libido in men in Malawi. However, selling of these drugs seems not to be well regulated. Probably the aphrodisiacs that are currently on the market have unknown efficacy, potency and safety profiles. The aim of this study was to assess the efficacy of imported Chinese aphrodisiacs using guinea pigs as a model. Materials and Methods Two types of drugs were purchased from vendors in Blantyre City. Tonic tea, which was purported to improve erectile function and libido, and sperm multiplier tablets which were claimed to increase the sperm count. The tonic tea was prepared by soaking one tea bag in 100ml boiling water. The tea was cooled and administered to eight male experimental animals in varying doses. Each animal was introduced into a separate cage with a female guinea pig. Sexual behaviour such as mounting, sniffing behind the female were observed and recorded. Each sperm multiplier tablet was dissolved in distilled water and administered to the experimental animals in the morning and evening for seven days. At the end of the treatment, the experimental and control animals were sacrificed, their semen collected and analysed sperm motility, concentration and morphology. Results For the tonic tea, there were no statistical differences between the experimental and the control animals in terms of the number of mountings and sniffing behind the female. The sperm multiplier drug showed statistically significant differences between the experimental and the control animals in terms of the sperm motility (78.24 ± 1.35 vs. 86.54 ± 1.88, p< 0.05), and concentration (54.28 ± 1.24 vs. 67.59 ± 2.12, p<0.05). Conclusion The tonic tea did not show any efficacy in improving erection and libido. The sperm multiplier tablets, purported to increase sperm production, significantly increased the sperm motility, sperm concentration in the treated animals.

Avaliação de heterociclo do tipo mesoiônico solubilizado em sistema microemulsionado para aplicação em dutos

The efficiency of inhibition to corrosion of steel AISI 1018 of surfactant coconut oil saponified (SCO) and heterocyclic type mesoionics (1,3,4-triazólio-2-tiolato) in systems microemulsionados (SCO-ME and SCO-ME-MI) Of type O/A (rich in water emulsion) region with the work of Winsor IV. The systems microemulsionados (SCO-ME and SCO-ME-MI) were evaluated with a corrosion inhibitor for use in saline 10,000 ppm of chloride enriched with carbon dioxide (CO2). The assessment of corrosion inhibitors were evaluated by the techniques of linear polarization resistance (LPR) and loss of weight (MW) in a cell instrumented given the gravity and electrochemical devices. The systems were shooting speed of less than 60 minutes and efficiency of inhibition [SCO-ME (91.25%) and SCO-ME-MI (98.54%)]

Factor analysis applied to genome prediction for high-dimensional phenotypes in pigs.

The aim of the present study was to propose and evaluate the use of factor analysis (FA) in obtaining latent variables (factors) that represent a set of pig traits simultaneously, for use in genome-wide selection (GWS) studies. We used crosses between outbred F2 populations of Brazilian Piau X commercial pigs. Data were obtained on 345 F2 pigs, genotyped for 237 SNPs, with 41 traits. FA allowed us to obtain four biologically interpretable factors: ?weight?, ?fat?, ?loin?, and ?performance?. These factors were used as dependent variables in multiple regression models of genomic selection (Bayes A, Bayes B, RR-BLUP, and Bayesian LASSO). The use of FA is presented as an interesting alternative to select individuals for multiple variables simultaneously in GWS studies; accuracy measurements of the factors were similar to those obtained when the original traits were considered individually. The similarities between the top 10% of individuals selected by the factor, and those selected by the individual traits, were also satisfactory. Moreover, the estimated markers effects for the traits were similar to those found for the relevant factor.

Implementação de um Módulo de Supervisão para um Sistema de Detecção de Vazamentos em Dutos de Petróleo

The transport of fluids through pipes is used in the oil industry, being the pipelines an important link in the logistics flow of fluids. However, the pipelines suffer deterioration in their walls caused by several factors which may cause loss of fluids to the environment, justifying the investment in techniques and methods of leak detection to minimize fluid loss and environmental damage. This work presents the development of a supervisory module in order to inform to the operator the leakage in the pipeline monitored in the shortest time possible, in order that the operator log procedure that entails the end of the leak. This module is a component of a system designed to detect leaks in oil pipelines using sonic technology, wavelets and neural networks. The plant used in the development and testing of the module presented here was the system of tanks of LAMP, and its LAN, as monitoring network. The proposal consists of, basically, two stages. Initially, assess the performance of the communication infrastructure of the supervisory module. Later, simulate leaks so that the DSP sends information to the supervisory performs the calculation of the location of leaks and indicate to which sensor the leak is closer, and using the system of tanks of LAMP, capture the pressure in the pipeline monitored by piezoresistive sensors, this information being processed by the DSP and sent to the supervisory to be presented to the user in real time