Review of Occupational Health Services in the HPSS (PDF 387 KB)

Supporting a Healthy Workforce

Occupational exposure of truck drivers to dust and polynuclear aromatic hydrocarbons: a pilot study in Geneva, Switzerland.

The exposure to dust and polynuclear aromatic hydrocarbons (PAH) of 15 truck drivers from Geneva, Switzerland, was measured. The drivers were divided between "long-distance" drivers and "local" drivers and between smokers and nonsmokers and were compared with a control group of 6 office workers who were also divided into smokers and nonsmokers. Dust was measured on 1 workday both by a direct-reading instrument and by sampling. The local drivers showed higher exposure to dust (0.3 mg/m3) and PAH than the long-distance drivers (0.1 mg/m3), who showed no difference with the control group. This observation may be due to the fact that the local drivers spend more time in more polluted areas, such as streets with heavy traffic and construction sites, than do the long-distance drivers. Smoking does not influence exposure to dust and PAH of professional truck drivers, as measured in this study, probably because the ventilation rate of the truck cabins is relatively high even during cold days (11-15 r/h). The distribution of dust concentrations was shown in some cases to be quite different from the expected log-normal distribution. The contribution of diesel exhaust to these exposures could not be estimated since no specific tracer was used. However, the relatively low level of dust exposure dose not support the hypothesis that present day levels of diesel exhaust particulates play a significant role in the excess occurrence of lung cancer observed in professional truck drivers.

Occupational Therapy Review January 2004 (PDF 55 KB)

Workforce Planning Review

Occupational Therapy Review March 2003 (PDF 350 KB)

Workforce Planning Review

Comprehensive Review of the HPSS Occupational Therapy Workforce (PDF 429 KB)

Report of the Project Group

Solid phase microextraction as a short-term sampling technique for BTEX occupational exposure

Solid phase microextraction (SPME) has been widely used for many years in various applications, such as environmental and water samples, food and fragrance analysis, or biological fluids. The aim of this study was to suggest the SPME method as an alternative to conventional techniques used in the evaluation of worker exposure to benzene, toluene, ethylbenzene, and xylene (BTEX). Polymethylsiloxane-carboxen (PDMS/CAR) showed as the most effective stationary phase material for sorbing BTEX among other materials (polyacrylate, PDMS, PDMS/divinylbenzene, Carbowax/divinylbenzene). Various experimental conditions were studied to apply SPME to BTEX quantitation in field situations. The uptake rate of the selected fiber (75 microm PDMS/CAR) was determined for each analyte at various concentrations, relative humidities, and airflow velocities from static (calm air) to dynamic (> 200 cm/s) conditions. The SPME method also was compared with the National Institute of Occupational Safety and Health method 1501. Unlike the latter, the SPME approach fulfills the new requirement for the threshold limit value-short term exposure limit (TLV-STEL) of 2.5 ppm for benzene (8 mg/m(3))

An empirical hierarchical Bayesian unification of occupational exposure assessment methods.

In occupational exposure assessment of airborne contaminants, exposure levels can either be estimated through repeated measurements of the pollutant concentration in air, expert judgment or through exposure models that use information on the conditions of exposure as input. In this report, we propose an empirical hierarchical Bayesian model to unify these approaches. Prior to any measurement, the hygienist conducts an assessment to generate prior distributions of exposure determinants. Monte-Carlo samples from these distributions feed two level-2 models: a physical, two-compartment model, and a non-parametric, neural network model trained with existing exposure data. The outputs of these two models are weighted according to the expert's assessment of their relevance to yield predictive distributions of the long-term geometric mean and geometric standard deviation of the worker's exposure profile (level-1 model). Bayesian inferences are then drawn iteratively from subsequent measurements of worker exposure. Any traditional decision strategy based on a comparison with occupational exposure limits (e.g. mean exposure, exceedance strategies) can then be applied. Data on 82 workers exposed to 18 contaminants in 14 companies were used to validate the model with cross-validation techniques. A user-friendly program running the model is available upon request.

Sociodemographic and occupational risk factors associated with the development of different burnout types: the cross-sectional University of Zaragoza study

BACKGROUND: Three different burnout types have been described: The "frenetic" type describes involved and ambitious subjects who sacrifice their health and personal lives for their jobs; the "underchallenged" type describes indifferent and bored workers who fail to find personal development in their jobs, and the "worn-out" in type describes neglectful subjects who feel they have little control over results and whose efforts go unacknowledged. The study aimed to describe the possible associations between burnout types and general sociodemographic and occupational characteristics. METHODS: A cross-sectional study was carried out on a multi-occupational sample of randomly selected university employees (n = 409). The presence of burnout types was assessed by means of the "Burnout Clinical Subtype Questionnaire (BCSQ-36)", and the degree of association between variables was assessed using an adjusted odds ratio (OR) obtained from multivariate logistic regression models. RESULTS: Individuals working more than 40 hours per week presented with the greatest risk for "frenetic" burnout compared to those working fewer than 35 hours (adjusted OR = 5.69; 95% CI = 2.52-12.82; p < 0.001). Administration and service personnel presented the greatest risk of "underchallenged" burnout compared to teaching and research staff (adjusted OR = 2.85; 95% CI = 1.16-7.01; p = 0.023). Employees with more than sixteen years of service in the organisation presented the greatest risk of "worn-out" burnout compared to those with less than four years of service (adjusted OR = 4.56; 95% CI = 1.47-14.16; p = 0.009). CONCLUSIONS: This study is the first to our knowledge that suggests the existence of associations between the different burnout subtypes (classified according to the degree of dedication to work) and the different sociodemographic and occupational characteristics that are congruent with the definition of each of the subtypes. These results are consistent with the clinical profile definitions of burnout syndrome. In addition, they assist the recognition of distinct profiles and reinforce the idea of differential characterisation of the syndrome for more effective treatment.

Parental occupational exposure to organic solvents and anencephaly in Mexico

Objective: To assess the relationship between parental occupational exposure to organic solvents, and the risk of anencephaly in Mexico. Methods: A case-control study was conducted based on the registers of the Epidemiological Surveillance System for Neural Tube Defects in Mexico; 151 cases of anencephaly of ≥20 weeks’ gestation were included. A control, born alive and without any apparent congenital malformations at birth, was selected for each case in the same maternity service in which the case was born. Information on occupational exposures, lifestyle habits, reproductive history, use of medicines, supplementation with multivitamins and folic acid, was obtained by a general questionnaire; a food frequency questionnaire was also applied to obtain information of daily intake of folate and other B vitamins. Occupational exposure to organic solvents was based on job title as a proxy for exposure and analysed considering two critical periods around conception. Results: In logistic regression analysis, the odds of having a child with anencephaly was higher if the mother or the father was occupationally exposed to organic solvents during the periconceptional period, or when both parents or at least one of them were occupationally exposed during this period with an adjusted odds ratio of 2.97 (95% CI 1.36 to 6.52). Conclusions: The results support the hypothesis that both maternal and paternal occupational exposure to organic solvents can increase the probability of having a child with anencephaly.

Identifying pesticide use patterns among flower growers to assess occupational exposure to mixtures

Objectives Exposure assessment to a single pesticide does not capture the complexity of the occupational exposure. Recently, pesticide use patterns analysis has emerged as an alternative to study these exposures. The aim of this study is to identify the pesticide use pattern among flower growers in Mexico participating in the study on the endocrine and reproductive effects associated with pesticide exposure. Methods A cross-sectional study was carried out to gather retrospective information on pesticide use applying a questionnaire to the person in charge of the participating flower growing farms. Information about seasonal frequency of pesticide use (rainy and dry) for the years 2004 and 2005 was obtained. Principal components analysis was performed. Results Complete information was obtained for 88 farms and 23 pesticides were included in the analysis. Six principal components were selected, which explained more than 70% of the data variability. The identified pesticide use patterns during both years were: 1. fungicides benomyl, carbendazim, thiophanate and metalaxyl (both seasons), including triadimephon during the rainy season, chlorotalonyl and insecticide permethrin during the dry season; 2. insecticides oxamyl, biphenthrin and fungicide iprodione (both seasons), including insecticide methomyl during the dry season; 3. fungicide mancozeb and herbicide glyphosate (only during the rainy season); 4. insecticides metamidophos and parathion (both seasons); 5. insecticides omethoate and methomyl (only rainy season); and 6. insecticides abamectin and carbofuran (only dry season). Some pesticides do not show a clear pattern of seasonal use during the studied years. Conclusions The principal component analysis is useful to summarise a large set of exposure variables into smaller groups of exposure patterns, identifying the mixtures of pesticides in the occupational environment that may have an interactive effect on a particular health effect.

In-vitro cell exposure studies for the assessment of nanoparticle toxicity in the lung: a dialog between aerosol science and biology

The introduction of engineered nanostructured materials into a rapidly increasing number of industrial and consumer products will result in enhanced exposure to engineered nanoparticles. Workplace exposure has been identified as the most likely source of uncontrolled inhalation of engineered aerosolized nanoparticles, but release of engineered nanoparticles may occur at any stage of the lifecycle of (consumer) products. The dynamic development of nanomaterials with possibly unknown toxicological effects poses a challenge for the assessment of nanoparticle induced toxicity and safety.In this consensus document from a workshop on in-vitro cell systems for nanoparticle toxicity testing11Workshop on 'In-Vitro Exposure Studies for Toxicity Testing of Engineered Nanoparticles' sponsored by the Association for Aerosol Research (GAeF), 5-6 September 2009, Karlsruhe, Germany. an overview is given of the main issues concerning exposure to airborne nanoparticles, lung physiology, biological mechanisms of (adverse) action, in-vitro cell exposure systems, realistic tissue doses, risk assessment and social aspects of nanotechnology. The workshop participants recognized the large potential of in-vitro cell exposure systems for reliable, high-throughput screening of nanoparticle toxicity. For the investigation of lung toxicity, a strong preference was expressed for air-liquid interface (ALI) cell exposure systems (rather than submerged cell exposure systems) as they more closely resemble in-vivo conditions in the lungs and they allow for unaltered and dosimetrically accurate delivery of aerosolized nanoparticles to the cells. An important aspect, which is frequently overlooked, is the comparison of typically used in-vitro dose levels with realistic in-vivo nanoparticle doses in the lung. If we consider average ambient urban exposure and occupational exposure at 5mg/m3 (maximum level allowed by Occupational Safety and Health Administration (OSHA)) as the boundaries of human exposure, the corresponding upper-limit range of nanoparticle flux delivered to the lung tissue is 3×10-5-5×10-3μg/h/cm2 of lung tissue and 2-300particles/h/(epithelial) cell. This range can be easily matched and even exceeded by almost all currently available cell exposure systems.The consensus statement includes a set of recommendations for conducting in-vitro cell exposure studies with pulmonary cell systems and identifies urgent needs for future development. As these issues are crucial for the introduction of safe nanomaterials into the marketplace and the living environment, they deserve more attention and more interaction between biologists and aerosol scientists. The members of the workshop believe that further advances in in-vitro cell exposure studies would be greatly facilitated by a more active role of the aerosol scientists. The technical know-how for developing and running ALI in-vitro exposure systems is available in the aerosol community and at the same time biologists/toxicologists are required for proper assessment of the biological impact of nanoparticles.