Effects of coastal managed retreat on mercury biogeochemistry

We investigated the impact of managed retreat on mercury (Hg) biogeochemistry at a site subject to diffuse contamination with Hg. We collected sediment cores from an area of land behind a dyke one year before and one year after it was intentionally breached. These sediments were compared to those of an adjacent mudflat and a salt marsh. The concentration of total mercury (THg) in the sediment doubled after the dyke was breached due to the deposition of fresh sediment that had a smaller particle size, and higher pH. The concentration of methylmercury (MeHg) was 27% lower in the sediments after the dyke was breached. We conclude that coastal flooding during managed retreat of coastal flood defences at this site has not increased the risk of Hg methylation or bioavailability during the first year. As the sediment becomes vegetated, increased activity of Hg-methylating bacteria may accelerate Hg-methylation rate.

Downwelling solar irradiance in the biomass burning region of the southern Amazon: Dependence on aerosol intensive optical properties and role of water vapor

The sensitivity of solar irradiance at the surface to the variability of aerosol intensive optical properties is investigated for a site (Alta Floresta) in the southern portion of the Amazon basin using detailed comparisons between measured and modeled irradiances. Apart from aerosol intensive optical properties, specifically single scattering albedo (omega(o lambda)) and asymmetry parameter (g(lambda)), which were assumed constant, all other relevant input to the model were prescribed based on observation. For clean conditions, the differences between observed and modeled irradiances were consistent with instrumental uncertainty. For polluted conditions, the agreement was significantly worse, with a root mean square difference three times larger (23.5 Wm(-2)). Analysis revealed a noteworthy correlation between the irradiance differences (observed minus modeled) and the column water vapor (CWV) for polluted conditions. Positive differences occurred mostly in wet conditions, while the differences became more negative as the atmosphere dried. To explore the hypothesis that the irradiance differences might be linked to the modulation of omega(o lambda) and g(lambda) by humidity, AERONET retrievals of aerosol properties and CWV over the same site were analyzed. The results highlight the potential role of humidity in modifying omega(o lambda) and g(lambda) and suggest that to explain the relationship seen between irradiances differences via aerosols properties the focus has to be on humidity-dependent processes that affect particles chemical composition. Undoubtedly, there is a need to better understand the role of humidity in modifying the properties of smoke aerosols in the southern portion of the Amazon basin.

Chemical bonding and composition of silicon nitride films prepared by inductively coupled plasma chemical vapor deposition

Thin silicon nitride films were prepared at 350 degrees C by inductively coupled plasma chemical vapor deposition on Si(100) substrates under different NH(3)/SiH(4) or N(2)/SiH(4) gas mixture. The chemical composition and bonding structure of the deposited films were investigated as a function of the process parameters, such as the gas flow ratio NH(3)/SiH(4) or N(2)/SiH(4) and the RF power, using X-ray photoelectron spectroscopy (XPS). The gas flow ratio was 1.4, 4.3, 7.2 or 9.5 and the RF power, 50 or 100 W. Decomposition results of Si 2p XPS spectra indicated the presence of bulk Si, under-stoichiometric nitride, stoichiometric nitride Si(3)N(4), oxynitride SiN(x)O(y), and stoichiometric oxide SiO(2), and the amounts of these compounds were strongly influenced by the two process parameters. These results were consistent with those obtained from N 1s XPS spectra. The chemical composition ratio N/Si in the film increased with increasing the gas flow ratio until the gas flow ratio reached 4.3, reflecting the high reactivity of nitrogen, and stayed almost constant for further increase in gas flow ratio, the excess nitrogen being rejected from the growing film. A considerable and unexpected incorporation of contaminant oxygen and carbon into the depositing film was observed and attributed to their high chemical reactivity. (C) 2010 Elsevier B.V. All rights reserved.

Calixarene and Resorcarene Based Receptors: From Structural and Thermodynamic Studies to the Synthesis of a New Mercury(II) Selective Material

Materials used in current technological approaches for the removal of mercury lack selectivity. Given that this is one of the main features of supramolecular chemistry, receptors based on calix[4]arene and calix[4]resorcarene containing functional groups able to interact selectively with polluting ions while discriminating against biologically essential ones were designed. Thus two receptors, a partially functionalized calix[4]arene derivative, namely, 5,11,17,23-tetra-tert-butyl [25-27-bis(diethyl thiophosphate amino)dihydroxy] calix[4]arene (1) and a fully functionalized calix[4]resorcarene, 4,6,10,12,16,18,22,24-diethyl thiophosphate calix[4]resorcarene (2) are introduced. Mercury(II) was the identified target due to the environmental and health problems associated with its presence in water Thus following the synthesis and characterization of 1 and 2 in solution ((1)HNMR) and in the solid state (X-ray crystallography) the sequence of experimental events leading to cation complexation studies in acetonitrile and methanol ((1)H NMR, conductance, potentiometric, and calorimetric measurements) with the aim of assessing their behavior as mercury selective receptors are described. The cation selectivity pattern observed in acetonitrile follows the sequence Hg(II) > Cu(II) > Ag(I). In methanol 1 is also selective for Hg(II) relative to Ag(I) but no interaction takes place between this receptor and Cu(II) in this solvent. Based on previous results and experimental facts shown in this paper, it is concluded that the complexation observed with Cu(II) in acetonitrile occurs through the acetonitrile-receptor adduct rather than through the free ligand. Receptor 2 has an enhanced capacity for uptaking Hg(II) but forms metalate complexes with Cu(II). These studies in solution guided the inmobilization of receptor 1 into a silica support to produce a new and recyclable material for the removal of Hg(II) from water. An assessment on its capacity to extract this cation from water relative to Cu(II) and Ag (I) shows that the cation selectivity pattern of the inmobilized receptor is the same as that observed for the free receptor in methanol. These findings demonstrate that fundamental studies play a critical role in the selection of the receptor to be attached to silicates as well as in the reaction medium used for the synthesis of the new decontaminating agent.

Development of a sequential injection-square wave voltammetry method for determination of paraquat in water samples employing the hanging mercury drop electrode

This work describes the development and optimization of a sequential injection method to automate the determination of paraquat by square-wave voltammetry employing a hanging mercury drop electrode. Automation by sequential injection enhanced the sampling throughput, improving the sensitivity and precision of the measurements as a consequence of the highly reproducible and efficient conditions of mass transport of the analyte toward the electrode surface. For instance, 212 analyses can be made per hour if the sample/standard solution is prepared off-line and the sequential injection system is used just to inject the solution towards the flow cell. In-line sample conditioning reduces the sampling frequency to 44 h(-1). Experiments were performed in 0.10 M NaCl, which was the carrier solution, using a frequency of 200 Hz, a pulse height of 25 mV, a potential step of 2 mV, and a flow rate of 100 mu L s(-1). For a concentration range between 0.010 and 0.25 mg L(-1), the current (i(p), mu A) read at the potential corresponding to the peak maximum fitted the following linear equation with the paraquat concentration (mg L(-1)): ip = (-20.5 +/- 0.3) Cparaquat -(0.02 +/- 0.03). The limits of detection and quantification were 2.0 and 7.0 mu g L(-1), respectively. The accuracy of the method was evaluated by recovery studies using spiked water samples that were also analyzed by molecular absorption spectrophotometry after reduction of paraquat with sodium dithionite in an alkaline medium. No evidence of statistically significant differences between the two methods was observed at the 95% confidence level.

Evaluation of a carbon paste electrode modified with organofunctionalised SBA-15 nanostructured silica in the simultaneous determination of divalent lead, copper and mercury ions

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol in the simultaneous determination of Pb(II), Cu(II) and Hg(II) ions in natural water and sugar cane spirit (cachaca) is described. Pb(II), Cu(II) and Hg(II) were pre-concentrated on the surface of the modified electrode by complexing with 2-benzothiazolethiol and reduced at a negative potential (-0.80 V). Then the reduced products were oxidised by DPASV procedure. The fact that three stripping peaks appeared on the voltammograms at the potentials of -0.48 V (Pb2+), -0.03 V (Cu2+) and +0.36 V (Hg2+) in relation to the SCE, demonstrates the possibility of simultaneous determination of Pb2+, Cu2+ and Hg2+. The best results were obtained under the following optimised conditions: 100 mV pulse amplitude, 3 min accumulation time, 25 mV s(-1) scan rate in phosphate solution pH 3.0. Using such parameters, calibration graphs were linear in the concentration ranges of 3.00-70.0 x 10(-7) mol L-1 (Pb2+), 8.00-100.0 X 10(-7) mol L-1 (Cu2+) and 2.00-10.0 x 10(-6) mol L-1 (Hg2+). Detection limits of 4.0 x 10(-8) mol L-1 (Pb2+), 2.0 x 10(-7) mol L-1 (Cu2+) and 4.0 x 10(-7) mol L-1 (Hg2+) were obtained at the signal noise ratio (SNR) of 3. The results indicate that this electrode is sensitive and effective for simultaneous determination of Pb2+, Cu2+ and Hg2+ in the analysed samples. (C) 2008 Published by Elsevier B.V.

Physical Vapor Deposited Thin Films of Lignins Extracted from Sugar Cane Bagasse: Morphology, Electrical Properties, and Sensing Applications

The concern related to the environmental degradation and to the exhaustion of natural resources has induced the research on biodegradable materials obtained from renewable sources, which involves fundamental properties and general application. In this context, we have fabricated thin films of lignins, which were extracted from sugar cane bagasse via modified organosolv process using ethanol as organic solvent. The films were made using the vacuum thermal evaporation technique (PVD, physical vapor deposition) grown up to 120 nm. The main objective was to explore basic properties such as electrical and surface morphology and the sensing performance of these lignins as transducers. The PVD film growth was monitored via ultraviolet-visible (UV-vis) absorption spectroscopy and quartz crystal microbalance, revealing a linear relationship between absorbance and film thickness. The 120 nm lignin PVD film morphology presented small aggregates spread all over the film surface on the nanometer scale (atomic force microscopy, AFM) and homogeneous on the micrometer scale (optical microscopy). The PVD films were deposited onto Au interdigitated electrode (IDE) for both electrical characterization and sensing experiments. In the case of electrical characterization, current versus voltage (I vs V) dc measurements were carried out for the Au IDE coated with 120 nm lignin PVD film, leading to a conductivity of 3.6 x 10(-10) S/m. Using impedance spectroscopy, also for the Au IDE coated with the 120 nm lignin PVD film, dielectric constant of 8.0, tan delta of 3.9 x 10(-3)) and conductivity of 1.75 x 10(-9) S/m were calculated at 1 kHz. As a proof-of-principle, the application of these lignins as transducers in sensing devices was monitored by both impedance spectroscopy (capacitance vs frequency) and I versus time dc measurements toward aniline vapor (saturated atmosphere). The electrical responses showed that the sensing units are sensible to aniline vapor with the process being reversible. AFM images conducted directly onto the sensing units (Au IDE coated with 120 nm lignin PVD film) before and after the sensing experiments showed a decrease in the PVD film roughness from 5.8 to 3.2 nm after exposing to aniline.

From Pettson and Findus to Festus and Mercury...and Back Again: A Comparison of Four Translations of Sven Nordqvist's Picture Books

In order to examine how children's literature might be translated, two different English translations of two Swedish picture books have been analyzed. The original Swedish books are Rävjakten and Pannkakstårtan by Sven Nordqvist. Rävjakten was translated as The Fox Hunt in 1988 and as The Fox Hunt in 2000. Pannkakstårtan was translated as Pancake Pie in 1985 and as The Birthday Cake in 1999. Literary translation in general, specific translation issues for children's literature, and trends in international English style have been considered. Analysis of the four texts has been made, with consideration given to the following areas: changes in illustrations, layout, or format; text changes; lexical choices; and retention, deletion, or modification of names and culturally specific references. The analysis revealed that the following tendencies were true for the later translations: foreignization of the text, word-for-word translation of the text, and a neutral international English variety.

Salmoninae Commensal Bacteria Show a Positive Correlation Between Antibiotic Resistance and Mercury Resistance Profiles

Bacterial isolates from natural sites with high toxic and heavy metal contamination more frequently contain determinants for resistance to antimicrobials. Natural strains were isolated from the ingesta and external slime of Salmo salar (Linnaeus, 1758) and Salvelinusjontinalis (Mitchell, 1814). Fish specimens were acquired from Casco Bay hatcheries, Casco, ME where there is no history of antibiotic use. Seventy-nine bacterial strains, including many well-documented salmonid commensals (an association from which the fish derives no benefit), were identified using 165 rRNA gene sequencing. Mercury resistant isolates were selected for initially on 25μM HgCI2. Strains were then grown at 20-24°C on Trypticase Soy Agar (TSA) plates containing 0-1000μM HgCl2 or 0-130μM Phenyl Mercuric Acetate (PMA). Mercury in the hatchery feed water due to ubiquitous non-point source deposition has selected for the mercury resistance observed in bacterial strains. Antibiotic resistance determinations, as measured by Minimum Inhibitory Concentration MIC) assays were performed on the 79 bacterial isolates using Sensititrel antimicrobial susceptibility panels. A positive linear correlation between the mercury (pMA and HgCl2) MIC's and antibiotic resistance for all observed strains was demonstrated. Conjugation experiments with Pseudomonas, Aeromonas, and Azomonas donors confirmed phenotypic transfer of penicillin and cephem resistances to Escherichia coli DH5a recipients. Conjugation experiments with Pseudomonas donors showed minimal transfer of tetracycline and minoglycoside resistances to Escherichia coli DH5a recipients. Our study suggests that the accumulation of antimicrobial resistances observed in these natural bacterial populations may be due to the indirect selective pressure exerted by environmental mercury.

Mercury content of tobacco products

Mercury contamination of food products results from contact with soil, water, and air polluted with mercury from industrial sources, as well as from the use of mercury-containing pesticides and fungicides on plants. A method was developed for extracting mercury from tobacco products. The mercury content of various tobacco products was determined, using an atomic absorption spectrophotometer.

Efeitos de explosão de nuvem de vapor inflamável

Neste trabalho é feito um estudo do processo de dispersão e combustão de uma mistura gasosa, assim como uma avaliação de alguns dos vários métodos disponíveis para estimar os resultados de uma explosão de nuvem de gás inflamável-ar. O método Multienergia foi utilizado para estimar os campos de sobrepressão resultantes de explosões de nuvens de GLP em áreas congestionadas pela presença de árvores, próximas a esferas de armazenamento de gás. Foram considerados como áreas congestionadas propícias para geração de turbulência os hortos florestais como os comumente encontrados em torno de indústrias petroquímicas e refinarias de petróleo. Foram feitas simulações para áreas de horto florestal de formato quadrado variando entre 50.000 m2 e 250.000 m2 e altura de 10 m. Para avaliar o efeito da explosão sobre a esfera, o critério de risco se baseou num elongamento máximo de 0,2% dos tirantes críticos de sustentação da mesma. Foram avaliados os efeitos destas explosões sobre uma esfera de GLP de diâmetro externo de 14,5 m para distâncias de 10 a 100 m entre a esfera e a borda do horto. É mostrado que áreas congestionadas com no mínimo 100.000 m2 podem representar um risco para a integridade das esferas menos preenchidas com GLP. Do ponto de vista da segurança das unidades de armazenamento, foi visto com base nos resultados obtidos que é preferível manter um menor número de esferas com maior preenchimento do que dividir o volume de GLP disponível entre várias unidades. Foi estimado que para áreas com grau de congestionamento de 25% a distância mínima segura entre a borda do horto e a esfera varia entre 10 m, para hortos com área de 100.000 m2, e 87,6 m, para hortos de 250.000 m2 A influência do espaçamento das árvores, representada pelo grau de obstrução da área de passagem da frente de chama, também foi analisada, indicando o quanto sua alteração pode afetar a distância mínima segura para as esferas. Por fim são feitas recomendações quanto à distância mínima entre o parque de esferas e o horto, bem como outras formas de diminuir o risco representado por explosões oriundas da formação acidental de mistura inflamável no interior dos mesmos.

Caracterização da resistência a corrosão de camadas obtidas por nitretação a plasma e deposição física de vapor sobre aço inoxidável AISI 316 L

A técnica de revestimento duplex combina dois processos: o tratamento de nitretação a plasma da superfície e a deposição de uma camada via PVD. O processo de nitretação a plasma sob condições controladas pode produzir a chamada “fase S” sem a presença de nitretos de cromo, o que confere ao aço tratado maior dureza e melhor resistência à corrosão. Os revestimentos de nitreto de titânio melhoram a dureza superficial do material, porém defeitos e poros podem expor o substrato ao meio. Este trabalho consiste no estudo da resistência à corrosão do aço inoxidável austenítico AISI 316L revestido com camada duplex em meio contendo cloretos. As camadas nitretadas a plasma foram obtidas pelo processo de nitretação iônica e os revestimentos Ti/TiN foram obtidos pelo processo de deposição física de vapor assistida por plasma (PAPVD). Os corpos de prova foram inicialmente avaliados por microscopia eletrônica de varredura (MEV) e a composição das fases foi identificada por difração de raios-x (DRX). A dureza foi avaliada por nanoidentação e a rugosidade superficial também foi medida. Os testes de resistência à corrosão foram feitos por voltametria cíclica (VC) e os ensaios de corrosão acelerada em câmara de névoa salina. A amostra nitretada a 400°C por 4 horas e mistura gasosa de 5%N2- 95%H2 apresentou o melhor desempenho de resistência à corrosão em meio contendo cloretos. A resistência à corrosão foi associada à estrutura obtida após o tratamento por nitretação a plasma e deposição física de vapores (PVD).