916 resultados para Invisible brackets
Resumo:
In “Thinking Feeling” a camera zooms in and around an animated constellation of words. There are ten words, each repeated one hundred times. The individual words independently pulse and orbit an invisible nucleus. The slow movements of the words and camera are reinforced by an airy, synthesised soundtrack. Over time, various phrasal combinations form and dissolve on screen. A bit like forcing oneself to sleep, “Thinking Feeling” picks at that fine line between controlling and letting go of thoughts. It creates small mantric loops that slip in and out of focus, playing with the liminal zones between the conscious and unconscious, between language and sensation, between gripping and releasing, and between calm and irritation.
Resumo:
Many ageing road bridges, particularly timber bridges, require urgent improvement due to the demand imposed by the recent version of the Australian bridge loading code, AS 5100. As traffic volume plays a key role in the decision of budget allocations for bridge refurbishment/ replacement, many bridges in low volume traffic network remain in poor condition with axle load and/ or speed restrictions, thus disadvantaging many rural communities. This thesis examines an economical and environmentally sensible option of incorporating disused flat rail wagons (FRW) in the construction of bridges in low volume, high axle load road network. The constructability, economy and structural adequacy of the FRW road bridge is reported in the thesis with particular focus of a demonstration bridge commissioned in regional Queensland. The demonstration bridge comprises of a reinforced concrete slab (RCS) pavement resting on two FRWs with custom designed connection brackets at regular intervals along the span of the bridge. The FRW-RC bridge deck assembly is supported on elastomeric rubber pads resting on the abutment. As this type of bridge replacement technology is new and its structural design is not covered in the design standards, the in-service structural performance of the FRW bridge subjected to the high axle loadings prescribed in AS 5100 is examined through performance load testing. Both the static and the moving load tests are carried out using a fully laden commonly available three-axle tandem truck. The bridge deck is extensively strain gauged and displacement at several key locations is measured using linear variable displacement transducers (LVDTs). A high speed camera is used in the performance test and the digital image data are analysed using proprietary software to capture the locations of the wheel positions on the bridge span accurately. The wheel location is thus synchronised with the displacement and strain time series to infer the structural response of the FRW bridge. Field test data are used to calibrate a grillage model, developed for further analysis of the FRW bridge to various sets of high axle loads stipulated in the bridge design standard. Bridge behaviour predicted by the grillage model has exemplified that the live load stresses of the FRW bridge is significantly lower than the yield strength of steel and the deflections are well below the serviceability limit state set out in AS 5100. Based on the results reported in this thesis, it is concluded that the disused FRWs are competent to resist high axle loading prescribed in AS 5100 and are a viable alternative structural solution of bridge deck in the context of the low volume road networks.
Raising awareness of traffic pollution: the potential benefits and problems of using a warning smell
Resumo:
Exposure to traffic pollution is increasing worldwide as people move to cities, and as more vehicles join the roads, creating longer journeys and more traffic jams. Most traffic pollutants are odourless and invisible, which hides exposure from the public. If traffic pollution had a distinctive smell it would enable people to avoid exposure, and increase the political will for difficult policy changes. A smell may also instigate longer-term changes, such as switching to active transport for school pick-ups. A smell could be added using a fuel additive or a temporary device attached to vehicle exhausts.
Resumo:
The removal of the sulfate anion from water using synthetic hydrotalcite (Mg/Al LDH) was investigated using powder x-ray diffraction (XRD) and thermogravimetric analysis (TG). Synthetic hydrotalcite Mg6Al2(OH)16(CO3)∙4H2O was prepared by the co-precipitation method from aluminum and magnesium chloride salts. The synthetic hydrotalcite was thermally activated to a maximum temperature of 380°C. Samples of thermally activated hydrotalcite where then treated with aliquots of 1000ppm sulfate solution. The resulting products where dried and characterized by XRD and TG. Powder XRD revealed that hydrotalcite had been successfully prepared and that the product obtained after treatment with sulfate solution also conformed well to the reference pattern of hydrotalcite. The d(003) spacing of all samples was found to be within the acceptable region for a LDH structure. TG revealed all products underwent a similar decomposition to that of hydrotalcite. It was possible to propose a reasonable mechanism for the thermal decomposition of a sulfate containing Mg/Al LDH. The similarities in the results may indicate that the reformed hydrotalcite may contain carbonate anion as well as sulfate. Further investigation is required to confirm this.
Resumo:
Medical industries have brought Information Technology (IT) in their systems for both patients and medical staffs due to the numerous benefits of IT we experience at presently. Moreover, the Mobile healthcare (M-health) system has been developed as the first step of Ubiquitous Health Environment (UHE). With the mobility and multi-functions, M-health system will be able to provide more efficient and various services for both doctors and patients. Due to the invisible feature of mobile signals, hackers have easier access to hospital networks than wired network systems. This may result in several security incidents unless security protocols are well implemented. In this paper, user authentication and authorization procedures will applied as a featured component at each level of M-health systems inthe hospital environment. Accordingly, M-health system in the hospital will meet the optimal requirements as a countermeasure to its vulnerabilities.
Resumo:
As much as victims have been absent in traditional and national criminal justice for a long time, they were invisible in transitional and international criminal justice after World War II. The Nuremberg Trials were dominated by the perpetrators, and documents were mainly used instead of victim testimony. Contemporaries shared the perspective that transitional justice, both international and national procedures should channel revenge by the victims and their families into the more peaceful venues of courts and legal procedures. Since then, victims have gained an ever more important role in transitional, post-conflict and international criminal justice. Non-judicial tribunals, Truth and Reconciliation Commissions, and international criminal courts and tribunals are relying on the testimony of victims and thus provide a prominent role for victims who often take centre stage in such procedures and trials. International criminal law and the human rights regime have provided victims with several routes to make themselves heard and fight against impunity. This paper tracks the road from absence to presence, and from invisibility to the visibility of victims during the second half of the last and the beginning of the present century. It shows in which ways their presence has shaped and changed transitional and international justice, and in particular how their absence or presence is linked to amnesties.
Resumo:
The study investigated early childhood teacher decision making at the preschool level in the state of Victoria, Australia. Victorian teachers at the preschool level were in an interesting position in 2004. Unlike most other Australian states Victoria did not have a curriculum framework guiding educational content and pedagogy. Consequently, this study was able to take advantage of this situation and examine teacher decision making at a time when early childhood teachers were relatively autonomous in deciding curriculum content. The opportunity to study teacher decision making in this way has since passed, as Victorian preschool teachers are now regulated by newly introduced state and national curricula frameworks. To identify influences affecting teacher decision making three preschool teachers were interviewed and curricula related policies were analysed. The data were analysed using Fairclough’s critical discourse analysis (CDA) technique. Critical discourse analysis enabled a close analysis of influences on teacher decision making illustrating how discourse is legitimated, marginalised, and silenced in certain curricula practices. Critical theory was the underpinning framework used for the study and enabled taken-for-granted understandings to be uncovered within early childhood policies and teacher interviews. Key findings were that despite there not being a government-mandated curricula framework for Victorian preschool education in 2004, teachers were held accountable for their curricula practice. Yet as professionals, early childhood teachers were denied public acknowledgment of their expertise as they were almost invisible in policy. Subsequently, teachers’ authority as professionals with curricula knowledge was diminished. The study found that developmentally appropriate practice (DAP) was a dominant discourse influencing teacher decision making (TDM). It operated as legitimated discourse in the 2004 Victorian preschool context. Additionally, the study found that teacher directed practice was legitimated, marginalised, and silenced by teachers. The findings have implications for early childhood teacher decision making at the practice, research, and policy levels. Findings show that the dominance of the DAP discourse informing teacher decision making limits other ways of thinking and practising.
Resumo:
The following are real statements from real women taken from two surveys (2001, 2008). While they were all pre-service teachers training to teach specialist secondary IT or computer science subjects, some were straight from school while others were mature-age or career-change students. Some were questioning whether they should follow careers in the IT industry or should they continue into IT teaching. This is a poetic transcription of their voices.
Resumo:
Humanitarian entrants remain invisible in existing populations datasets, and this has significant implications for health care and health policy. We suggest adding 'year of arrival' to population datasets; enabling the combination of 'country of birth' and 'year of arrival' to be used as a proxy for refugee status.
Resumo:
A fundamental prerequisite of population health research is the ability to establish an accurate denominator. This in turn requires that every individual in the study population is counted. However, this seemingly simple principle has become a point of conflict between researchers whose aim is to produce evidence of disparities in population health outcomes and governments whose policies promote(intentionally or not) inequalities that are the underlying causes of health disparities. Research into the health of asylum seekers is a case in point. There is a growing body of evidence documenting the adverse affects of recent changes in asylum-seeking legislation, including mandatory detention. However, much of this evidence has been dismissed by some governments as being unsound, biased and unscientific because, it is argued, evidence is derived from small samples or from case studies. Yet, it is the policies of governments that are the key barrier to the conduct of rigorous population health research on asylum seekers. In this paper, the authors discuss the challenges of counting asylum seekers and the limitations of data reported in some industrialized countries. They argue that the lack of accurate statistical data on asylum seekers has been an effective neo-conservative strategy for erasing the health inequalities in this vulnerable population, indeed a strategy that renders invisible this population. They describe some alternative strategies that may be used by researchers to obtain denominator data on hard-to-reach populations such as asylum seekers.
Resumo:
This paper argues from the standpoint that embedding Indigenous knowledge and perspectives in Australian curricula occurs within a space of tension, ‘the cultural interface’ (Nakata, 2002), in negotiation and contestation with other dominant knowledge systems. In this interface, Indigenous knowledge (IK) is in a state of constancy and flux, invisible and simultaneously pronounced depending on the teaching and learning contexts. More often than not, IK competes for validity and is vexed by questions of racial and cultural authenticity, and therefore struggles to be located centrally in educational systems, curricula and pedagogies. Interrogating normative western notions of what constitutes authentic or legitimate knowledge is critical to teaching Indigenous studies and embedding IK. The inclusion (and exclusion) of IK at the interface is central to developing curriculum that allows teachers to test and prod, create new knowledge and teaching approaches. From this perspective, we explore Indigenous Australian pre-service teachers’ experiences of pedagogical relationships within the teaching habitus of Australian classrooms. Our study is engaged with the strategic transgressions of praxis. We contend that tensions that participant Indigenous Australian pre-service teachers experience mirror the broader (and unresolved) political status of Indigenous people and thus where and why IK is strategically deployed as ‘new’ or ‘old knowledge within Australian liberal democratic systems of curriculum and schooling. It is significant to discuss the formation and transformation of the pedagogical cultural identity of the teaching profession within which Indigenous and non-Indigenous pre-service teachers are employed.
Resumo:
With the advent of digital media and online information resources, public libraries as physical destinations for information access are being increasingly challenged. As a response, many libraries follow the trend of removing bookshelves in order to provide more floorspace for social interaction and collaboration. Such spaces follow a Commons 2.0 model: they are designed to support collaborative work and social learning. The acquisition of skills and knowledge is facilitated as a result of being surrounded by and interacting with a community of likeminded others. Based on the results of a case study on a Commons 2.0 library space, this paper describes several issues of collaboration and social learning in public library settings. Acknowledging the significance of the architectural characteristics of the physical space, we discuss opportunities for ambient media to better reflect the social attributes of the library as a place; i.e. amplify the sense of other co-present library visitors and provide opportunities for shared encounters and conversations, which would remain invisible otherwise. We present the design of a user check-in system for improving the library as a physical destination for social learning, sharing, and inspiration for and by the community.
Resumo:
In recent years considerable attention has been paid to the numerical solution of stochastic ordinary differential equations (SODEs), as SODEs are often more appropriate than their deterministic counterparts in many modelling situations. However, unlike the deterministic case numerical methods for SODEs are considerably less sophisticated due to the difficulty in representing the (possibly large number of) random variable approximations to the stochastic integrals. Although Burrage and Burrage [High strong order explicit Runge-Kutta methods for stochastic ordinary differential equations, Applied Numerical Mathematics 22 (1996) 81-101] were able to construct strong local order 1.5 stochastic Runge-Kutta methods for certain cases, it is known that all extant stochastic Runge-Kutta methods suffer an order reduction down to strong order 0.5 if there is non-commutativity between the functions associated with the multiple Wiener processes. This order reduction down to that of the Euler-Maruyama method imposes severe difficulties in obtaining meaningful solutions in a reasonable time frame and this paper attempts to circumvent these difficulties by some new techniques. An additional difficulty in solving SODEs arises even in the Linear case since it is not possible to write the solution analytically in terms of matrix exponentials unless there is a commutativity property between the functions associated with the multiple Wiener processes. Thus in this present paper first the work of Magnus [On the exponential solution of differential equations for a linear operator, Communications on Pure and Applied Mathematics 7 (1954) 649-673] (applied to deterministic non-commutative Linear problems) will be applied to non-commutative linear SODEs and methods of strong order 1.5 for arbitrary, linear, non-commutative SODE systems will be constructed - hence giving an accurate approximation to the general linear problem. Secondly, for general nonlinear non-commutative systems with an arbitrary number (d) of Wiener processes it is shown that strong local order I Runge-Kutta methods with d + 1 stages can be constructed by evaluated a set of Lie brackets as well as the standard function evaluations. A method is then constructed which can be efficiently implemented in a parallel environment for this arbitrary number of Wiener processes. Finally some numerical results are presented which illustrate the efficacy of these approaches. (C) 1999 Elsevier Science B.V. All rights reserved.
Resumo:
This paper reports on an action-learning project conducted within the first year criminal justice curriculum in an Australian university. The project was initiated after an audit of first year units and student feedback revealed that there were gaps in the curriculum that possibly were disadvantaging certain groups of students, including mature, international, queer and disabled students, rendering them invisible. Official (university controlled student surveys and other feedback mechanisms) and anecdotal feedback found that at least some students in these groups felt disenfranchised; that is, unable to relate to either the subject mater, other students, or the university setting itself. As a school in which social justice provides the context for learning about criminal justice, first year subject coordinators as a group came to recognise the need for embedding diversity in the curriculum.
Resumo:
Damage assessment (damage detection, localization and quantification) in structures and appropriate retrofitting will enable the safe and efficient function of the structures. In this context, many Vibration Based Damage Identification Techniques (VBDIT) have emerged with potential for accurate damage assessment. VBDITs have achieved significant research interest in recent years, mainly due to their non-destructive nature and ability to assess inaccessible and invisible damage locations. Damage Index (DI) methods are also vibration based, but they are not based on the structural model. DI methods are fast and inexpensive compared to the model-based methods and have the ability to automate the damage detection process. DI method analyses the change in vibration response of the structure between two states so that the damage can be identified. Extensive research has been carried out to apply the DI method to assess damage in steel structures. Comparatively, there has been very little research interest in the use of DI methods to assess damage in Reinforced Concrete (RC) structures due to the complexity of simulating the predominant damage type, the flexural crack. Flexural cracks in RC beams distribute non- linearly and propagate along all directions. Secondary cracks extend more rapidly along the longitudinal and transverse directions of a RC structure than propagation of existing cracks in the depth direction due to stress distribution caused by the tensile reinforcement. Simplified damage simulation techniques (such as reductions in the modulus or section depth or use of rotational spring elements) that have been extensively used with research on steel structures, cannot be applied to simulate flexural cracks in RC elements. This highlights a big gap in knowledge and as a consequence VBDITs have not been successfully applied to damage assessment in RC structures. This research will address the above gap in knowledge and will develop and apply a modal strain energy based DI method to assess damage in RC flexural members. Firstly, this research evaluated different damage simulation techniques and recommended an appropriate technique to simulate the post cracking behaviour of RC structures. The ABAQUS finite element package was used throughout the study with properly validated material models. The damaged plasticity model was recommended as the method which can correctly simulate the post cracking behaviour of RC structures and was used in the rest of this study. Four different forms of Modal Strain Energy based Damage Indices (MSEDIs) were proposed to improve the damage assessment capability by minimising the numbers and intensities of false alarms. The developed MSEDIs were then used to automate the damage detection process by incorporating programmable algorithms. The developed algorithms have the ability to identify common issues associated with the vibration properties such as mode shifting and phase change. To minimise the effect of noise on the DI calculation process, this research proposed a sequential order of curve fitting technique. Finally, a statistical based damage assessment scheme was proposed to enhance the reliability of the damage assessment results. The proposed techniques were applied to locate damage in RC beams and slabs on girder bridge model to demonstrate their accuracy and efficiency. The outcomes of this research will make a significant contribution to the technical knowledge of VBDIT and will enhance the accuracy of damage assessment in RC structures. The application of the research findings to RC flexural members will enable their safe and efficient performance.