Breastfeeding preterm infant from the delivery ward via nicu to home

The aim of this study was to examine how to support breastfeeding of preterm infants immediately after birth in the delivery ward, during their hospital stay in a neonatal intensive care unit (NICU), and at home after hospital discharge. Specifically, the role of early physical contact, maternal breastfeeding attitude, and an internet-based peer support group were investigated. The delivery ward practices concerning the implementation of early physical contact between a mother and her infant admitted to a NICU were examined by a structured survey in two hospitals. An Internet-based, breastfeeding peer-support intervention for the mothers of preterm infants was developed and tested in a randomized controlled design with one year follow-up. The main outcomes were the duration of exclusive and overall breastfeeding, expressing milk, and maternal attitude. In addition, the perceptions of mothers of preterm infants were investigated by analyzing the peer-support group discussions with a qualitative approach. The implementation of early physical contact was different between the two hospitals studied and was based more on hospital routines than the physiological condition of the infant. Preterm infants, who were born before a gestational age (GA) of 32 weeks, were hardly ever allowed to have early contact with their mothers. Both, a higher GA and early physical contact predicted earlier initiation and increased frequency of breastfeeding in the NICU. A maternal breastfeeding-favorable attitude predicted increased frequency of breastfeeding in the NICU and also a longer duration of overall breastfeeding. The actual duration of breastfeeding was, however, shorter than the mothers intended in advance. The internet-based, peer-support intervention had no effect on the duration of breastfeeding, expressing milk, or maternal attitude. The participating mothers enjoyed the possibility of sharing their experiences of preterm infants with other mothers in similar situations. Some of the mothers also experienced being given useful advice for breastfeeding. Based on the mothers’ discussions, a process of breastfeeding preterm infants was created. This included some paradoxical elements in the NICU where, for example, breast milk was emphasized over breastfeeding and support in the hospital varied. Hospital discharge was a critical point, when the mothers faced breastfeeding in reality. Over time, the mothers assimilated their breastfeeding experience into part of being a mother. The care practices related to early physical contact in delivery wards need to be re-evaluated to allow more infants to have a moment with the mother. Maternal attitude could be screened prenatally and attitude-focused interventions developed. Breastfeeding support in the NICU should be standardized. Internet-based breastfeeding peer-support intervention was feasible but additional research is needed.

Possibilities and challenges in utilization of information provided by Industrial Internet applications

Global digitalization has affected also industrial sector. A trend called Industrial Internet has been present for some years and established relatively steady position in businesses. Industrial Internet is also referred with the terminology Industry 4.0 and in consumer businesses IoT (Internet of Things). Eventually, trend consists of many traditionally proven technologies and concepts, such as condition monitoring, remote services, predictive maintenance and Internet customer portals. All these technologies and information related to them are estimated to change the rules of business in industrial sector. This may result even a new industrial revolution. This research has its focus on Industrial Internet products, services and applications. The study analyses four case companies and their digital service offerings. According to this analysis the comparison of these services is done to find out if there is still space for companies to gain competitive advantage through differentiation with these state of the art solutions. One of the case companies, Case Company Ltd., is working as a primary case company and a subscriber of this particular research. The research and results are analyzed primarily from this company’s perspective and need. In empirical part, the research clarifies how Case Company Ltd. has allocated its development resources through last five years. These allocations in certain categories are then compared to other case companies’ current customer offering and conclusions are made how the approach of different companies differ from each other. Existing theoretical knowledge of Industrial Internet is about to find its shape. In this research we take a look how the case company analysis and findings correlate with the existing knowledge and literature of the topic.

Les campagnes sociales destinées aux jeunes adultes québécois sur Internet : pistes pour l'optimisation des sites Web

Avec la montée en popularité d’Internet et des médias sociaux, de plus en plus d’organismes sociaux et publics, notamment, intègrent des plateformes Web à leurs volets traditionnels. La question d’Internet demeure toutefois peu étudiée eu égard à la publicité sociale. Ce mémoire porte donc sur la question du Web en relation avec les campagnes sociales adressées aux jeunes Québécois de 18 à 25 ans, une population particulièrement réceptive aux nouvelles technologies. Plus exactement, dans cette étude, nous avons analysé trois sites Web rattachés à des campagnes sociales (La vitesse, ça coûte cher de la SAAQ, Les ITSS se propagent du MSSS et 50 000 adeptes, 5 000 toutous de la Fondation CHU Sainte-Justine) dans l’objectif de déterminer leurs forces et leurs faiblesses pour ensuite proposer des pistes pour leur optimisation. C’est à l’aide d’une analyse critique de contenu suivie d’entrevues et d’observations individuelles auprès de 19 participants que nous sommes parvenue à suggérer des pistes pour l’optimisation des sites Web de campagnes sociales destinées aux jeunes adultes québécois. Une des plus grandes difficultés en ce qui a trait à leur conception consiste à choisir les stratégies les plus appropriées pour provoquer un changement d’attitude ou de comportement, a fortiori chez ceux qui adoptent des comportements à risque (fumer, conduire en état d’ébriété, avoir des relations sexuelles non protégées); des stratégies qui, pour être plus efficaces, devraient être adaptées en fonction des caractéristiques propres aux publics cibles et aux médias de diffusion. Afin d’analyser adéquatement les campagnes sociales, nous avons fait appel aux théories de la persuasion et aux théories sur l’influence des médias jugées pertinentes dans notre contexte puisqu’elles sont propres à ce type d’étude. Ces approches combinées nous ont permis d’intégrer à l’analyse d’une campagne donnée les contextes qui l’entourent et les pratiques dans lesquelles elle s’inscrit. Cette étude nous a, entre autres, permis de démontrer qu’il existait d’importants écarts entre les attentes et les besoins des internautes et l’offre des sites Web étudiés.

WAIS seminar: Research Discussion: Lab of Things? What Things?

Wednesday 19th March 2014 Speaker(s): Kirk Martinez, Dr Jonathon S Hare and Dr Enrico Costanza Organiser: Dr Tim Chown Time: 19/03/2014 11:00-11:50 Location: B32/3077 File size: 676 Mb Abstract The new WAIS seminar series features classic seminars, research discussions, tutorial-style presentations, and research debates. This seminar takes the form of a research discussion which will focus on the Internet of Things (IoT) research being undertaken in WAIS and other research groups in ECS. IoT is a significant emerging research area, with funding for research available from many channels including new H2020 programmes and the TSB. We have seen examples of IoT devices being built in WAIS and other ECS groups, e.g. in sensor networking, energy monitoring via Zigbee devices, and of course Erica the Rhino (a Big Thing!). The goal of the session is to briefly present such examples of existing Things in our lab with the intent of seeding discussion on open research questions, and therefore future work we could do towards new Things being deployed for experimentation in Building 32 or its environs. The session will discuss what 'things' we have, how they work, what new 'things' might we want to create and deploy, what components we might need to enable this, and how we might interact with these objects.

Energy consumption feedback in perspective: integrating Australian data to meta-analyses on in home displays

Providing homeowners with real-time feedback on their electricity consumption through a dedicated display device has been shown to reduce consumption by approximately 6-10%. However, recent advances in smart grid technology have enabled larger sample sizes and more representative sample selection and recruitment methods for display trials. By analyzing these factors using data from current studies, this paper argues that a realistic, large-scale conservation effect from feedback is in the range of 3-5%. Subsequent analysis shows that providing real-time feedback may not be a cost effective strategy for reducing carbon emissions in Australia, but that it may enable additional benefits such as customer retention and peak-load shift.

Mobility based energy efficient and multi-sink algorithms for consumer home networks

With the fast development of the Internet, wireless communications and semiconductor devices, home networking has received significant attention. Consumer products can collect and transmit various types of data in the home environment. Typical consumer sensors are often equipped with tiny, irreplaceable batteries and it therefore of the utmost importance to design energy efficient algorithms to prolong the home network lifetime and reduce devices going to landfill. Sink mobility is an important technique to improve home network performance including energy consumption, lifetime and end-to-end delay. Also, it can largely mitigate the hot spots near the sink node. The selection of optimal moving trajectory for sink node(s) is an NP-hard problem jointly optimizing routing algorithms with the mobile sink moving strategy is a significant and challenging research issue. The influence of multiple static sink nodes on energy consumption under different scale networks is first studied and an Energy-efficient Multi-sink Clustering Algorithm (EMCA) is proposed and tested. Then, the influence of mobile sink velocity, position and number on network performance is studied and a Mobile-sink based Energy-efficient Clustering Algorithm (MECA) is proposed. Simulation results validate the performance of the proposed two algorithms which can be deployed in a consumer home network environment.

An enhanced fall detection system for elderly person monitoring using consumer home networks

Various fall-detection solutions have been previously proposed to create a reliable surveillance system for elderly people with high requirements on accuracy, sensitivity and specificity. In this paper, an enhanced fall detection system is proposed for elderly person monitoring that is based on smart sensors worn on the body and operating through consumer home networks. With treble thresholds, accidental falls can be detected in the home healthcare environment. By utilizing information gathered from an accelerometer, cardiotachometer and smart sensors, the impacts of falls can be logged and distinguished from normal daily activities. The proposed system has been deployed in a prototype system as detailed in this paper. From a test group of 30 healthy participants, it was found that the proposed fall detection system can achieve a high detection accuracy of 97.5%, while the sensitivity and specificity are 96.8% and 98.1% respectively. Therefore, this system can reliably be developed and deployed into a consumer product for use as an elderly person monitoring device with high accuracy and a low false positive rate.

Distributed access control and privacy for the internet of me

This article presents an experimental scalable message driven IoT and its security architecture based on Decentralized Information Flow Control. The system uses a gateway that exports SoA (REST) interfaces to the internet simplifying external applications whereas uses DIFC and asynchronous messaging within the home environment.

Fear causes tears – perineal injuries in home birth settings : a Swedish interview study

Background: Perineal injury is a serious complication of vaginal delivery that has a severe impact on the quality of life of healthy women. The prevalence of perineal injuries among women who give birth in hospital has increased over the last decade, while it is lower among women who give birth at home. The aim of this study was to describe the practice of midwives in home birth settings with the focus on the occurrence of perineal injuries. Methods: Twenty midwives who had assisted home births for between one and 29 years were interviewed using an interview guide. The midwives also had experience of working in a hospital delivery ward. All the interviews were tape-recorded and transcribed. Content analysis was used. Results: The overall theme was "No rushing and tearing about", describing the midwives' focus on the natural process taking its time. The subcategories 1) preparing for the birth; 2) going along with the physiological process; 3) creating a sense of security; 4) the critical moment and 5) midwifery skills illuminate the management of labor as experienced by the midwives when assisting births at home. Conclusions: Midwives who assist women who give birth at home take many things into account in order to minimize the risk of complications during birth. Protection of the woman's perineum is an act of awareness that is not limited to the actual moment of the pushing phase but starts earlier, along with the communication between the midwife and the woman.

A Internet como canal de compra

A Internet, apesar de sua grande popularização, é ainda uma incógnita sob o ponto de vista de seu alcance comercial e de suas implicações no estudo do Comportamento do Consumidor. Numerosos estudos estão sendo desenvolvidos, porém dentro de um contexto teórico clássico de Marketing, isto é, posicionando-a como um instrumento “midiático”. Diferentemente, este trabalho procura vê-la como um canal de marketing, analisando-a através da resposta de 726 usuários da Companhia de Processamento de Dados do Rio Grande do Sul – PROCERGS, provedor de acesso à Internet do Rio Grande do Sul. Foi possível identificar sete dimensões características do processo de compra na rede: 1) comodidade, 2) atendimento, 3) conteúdo informacional do site, 4) apresentação e interface da home page, 5) segurança, 6) taxa e tempo de entrega e 7) oferta de produtos. O estudo mostra que a oferta de produtos e a comodidade são os fatores que influenciam a decisão de compra, enquanto que a apresentação/interface da home page, a segurança e o atendimento são os fatores mais preponderantes na decisão de NÃO compra. Também são apresentadas as diferenças percebidas pelos usuários entre a compra realizada na Internet e a efetuada nos canais tradicionais. A avaliação da Internet como canal de compra é finalizada com a identificação dos atributos determinantes da compra pela rede.

Fatores-chave na qualidade de sistemas de home broker : uma análise teórico-empírica

This work has as main objective the development of a key factors¿ model for the quality of Home Broker systems. An explanatory research was performed, based on a quantitative approach. To achieve this goal, some theoretical models of technology acceptance (TAM, TRA, TPB and IDT), reliability and quality of service were reviewed. It was proposed an extended key factors¿ model and developed a questionnaire, which was the research instrument used in this study. The questionnaire was applied over the Internet, from which was obtained a participation of 113 valid respondents, all of them users of Home Broker system. Once performed the data collection, statistical tests were used for the Factorial Analysis in order to achieve a definitive model. The key factors found were Perceived Usefulness, Perceived Ease of Use, Subjective Norms, Compatibility, Reliability and Relative Advantage. Some hypotheses from the model were also tested to investigate the relationship between the importance given to the factors and the resulting degree of satisfaction about quality of service. As a result of the study, a key factors¿ model for the quality of Home Broker systems was established, and identified that the factor Compatibility" has more explanatory power than the others."

Evolving Future Internet clean-slate Entity Title Architecture with quality-oriented control-plane extensions

A Internet atual vem sofrendo vários problemas em termos de escalabilidade, desempenho, mobilidade, etc., devido ao vertiginoso incremento no número de usuários e o surgimento de novos serviços com novas demandas, propiciando assim o nascimento da Internet do Futuro. Novas propostas sobre redes orientadas a conteúdo, como a arquitetura Entidade Titulo (ETArch), proveem novos serviços para este tipo de cenários, implementados sobre o paradigma de redes definidas por software. Contudo, o modelo de transporte do ETArch é equivalente ao modelo best-effort da Internet atual, e vem limitando a confiabilidade das suas comunicações. Neste trabalho, ETArch é redesenhado seguindo o paradigma do sobreaprovisionamento de recursos para conseguir uma alocação de recursos avançada integrada com OpenFlow. Como resultado, o framework SMART (Suporte de Sessões Móveis com Alta Demanda de Recursos de Transporte), permite que a rede defina semanticamente os requisitos qualitativos das sessões para assim gerenciar o controle de Qualidade de Serviço visando manter a melhor Qualidade de Experiência possível. A avaliação do planos de dados e de controle teve lugar na plataforma de testes na ilha do projeto OFELIA, mostrando o suporte de aplicações móveis multimídia com alta demanda de recursos de transporte com QoS e QoE garantidos através de um esquema de sinalização restrito em comparação com o ETArch legado

In-process thermal damage detection in grinding with monitoring via Internet

This work aims the development of a dedicated system for detection of burning in surface grinding process, where the process will constantly be monitored through the acoustic emission and electric power of the induction motor drive. Acquired by an analog-digital converter, algorithms process the signals and a control signal is generated to inform the operator or interrupt the process in case of burning occurrence. Moreover, the system makes possible the process monitoring via Internet. Additionally, a comparative study between parameters DPO and FKS is carried through. In the experimental work one type of. steel (ABNT-1020 annealed) and one type of grinding wheel referred to as TARGA, model ART 3TG80.3 NVHB, were employed.