Avaliação da alimentação de idosos de município paulista: aplicação do Índice de Alimentação Saudável

OBJETIVO: avaliar a qualidade da dieta da população idosa do município de Avaré (SP) através do Índice de Alimentação Saudável (IAS) MÉTODOS: trata-se de um estudo de corte transversal de base populacional realizado por meio de entrevista domiciliar. A amostra constou de 73 indivíduos, sorteados aleatoriamente dos idosos integrados ao Sistema Público de Saúde do Município. O consumo alimentar foi medido por meio de 3 Recordatórios de 24 horas. Para avaliação, foi aplicado o IAS adaptado para a população brasileira. Parte-se do princípio que o presente estudo constitui o primeiro no Brasil a aplicar o IAS utilizando 3 inquéritos do tipo recordatório de 24 horas em população idosa. Optou-se por esta metodologia, pois como descrito na literatura, um único dia não representa a ingestão habitual de um indivíduo devido à elevada variabilidade intrapessoal do consumo. RESULTADOS: Foram encontrados 32,9% de idosos com uma dieta de má qualidade; 60,3% necessitando de melhorias e 6,8% com uma dieta de boa qualidade. CONCLUSÃO: Pode-se concluir que os idosos estudados precisam de melhorias na alimentação, o que ressalta a importância de política de incentivo voltado à alimentação saudável na terceira idade.

Interactions in the Agrobacterium-soybean system and capability of some Brazilian soybean cultivars to produce somatic embryos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Immunoassays for pesticide analysis in environmental and food matrices

Immunochemical methods have increased considerably in the past years, and many examples of small and large scale studies have demonstrated the reliability of the immunotechniques for control and monitoring gf contaminant residues in different kinds of samples. Application of the immunoassay (IA) methods in pesticide residue control is an area with enormous potential for growth. The most extensively studied IA is the enzyme-linked absorbent assay (ELISA), but several other approaches, that include radioimmunoassay and immunoaffinity chromatography, have been also developed recently. In comparison with classical analytical methods, IA methods offer the possibility of highly sensitive, relatively vapid, and cost-effective measurements. This paper introduces the general IAs used until now, focusing on their use in pesticide analysis, and discussing briefly the effects of interferences from solvent residues or matrix components on the IA performance. Numerous immunochemical methods commonly used for pesticide determination in different samples such as food, crop and environmental samples are presented.

Lability of heavy metal species in aquatic humic substances characterized by ion exchange with cellulose phosphate

Labile metal species in aquatic humic substances (HSs) were characterized by ion exchange on cellulose phosphate (CellPhos) by applying an optimized batch procedure. The HSs investigated were pre-extracted from humic-rich waters by ultrafiltration and a resin XAD 8 procedure. The HS-metal species studied were formed by complexation with Cd(II), Ni(II), Cu(II), Mn(II) and Pb(II) as a function of time and the ratio ions to HSs. The kinetics and reaction order of this exchange process were studied. At the beginning (<3 min), the labile metal fractions are separated relatively quickly. After 3 min, the separation of the metal ions proceeds with uniform half-lives of about 12-14 min, revealing rather slow first-order kinetics. The metal exchange between HSs and CellPhos exhibited the following order of metal lability with the studied HSs: Cu > Pb > Mn > Ni > Cd. The required metal determinations were carried out by atomic absorption spectrometry.

Epibiosis and molting in two species of Callinectes (Decapoda: Portunidae) from Brazil

The external infestation of Callinectes ornatus Ordway, 1863 and Callinectes danae Smith, 1869, in particular cirripeds, was studied for two consecutive years in the Ubatuba Bay (SP) (23 degrees 26' S and 45 degrees 02' W). Bryozoans, polychaetes and cirripeds were found on both swimming crab species, but cirripeds were the most abundant and frequent. The number of infested swimming crabs increased proportionally to carapace size, but not surpassing 30 %, suggesting an absence of terminal anecdysis in both species. The establishment of the pernicious organisms on their hosts is influenced by other factors, such as their habit of burying themselves in sediments. The correlation between molting activity in adult specimens of both sexes and the low incidence of epizoonts suggest that C. ornatus and C. danae may be molting after maturity.

Aquatic humus from an unpolluted Brazilian dark-brown stream: general characterization and size fractionation of bound heavy metals

The main pool of dissolved organic carbon in tropical aquatic environments, notably in dark-coloured streams, is concentrated in humic substances (HS). Aquatic HS are large organic molecules formed by micro-biotic degradation of biopolymers and polymerization of smaller organic molecules. From an environmental point of view, the study of metal-humic interactions is often aimed at predicting the effect of aquatic HS on the bioavailability of heavy metal ions in the environment. In the present work the aquatic humic substances (HS) isolated from a dark-brown stream (located in an environmental protection area near Cubatao city in São Paulo-State, Brazil) by means of the collector XAD-8 were investigated. FTIR studies showed that the carboxylic carbons are probably the most important binding sites for Hg(II) ions within humic molecules. C-13-NMR and H-1-NMR studies of aquatic HS showed the presence of constituents with a high degree of aromaticity (40% of carbons) and small substitution. A special five-stage tangential-flow ultrafiltration device (UF) was used for size fractionation of the aquatic HS under study and for their metal species in the molecular size range 1-100 kDa (six fractions). The fractionation patterns showed that metal traces remaining in aquatic HS after their XAD-8 isolation have different distributions. Generally, the major percentage of traces of Mn, Cd and Ni (determined by ICP-AES) was preferably complexed by molecules with relatively high molecular size. Cu was bound by fractions with low molecular size and Co showed no preferential binding site in the various humic fractions. Moreover, the species formed between aquatic HS and Hg(II), prepared by spiking (determined by CVAAS), appeared to be concentrated in the relatively high molecular size fraction F-1 (> 100 kDa).

Correlation of electrical conductivity and other vigor tests with field emergence of soybean seedlings

Seeds from six soybean cultivars (Cristalina, IAC 31-Foscarin, IAC-15, UFV-10, IAC-14 and IAS-5) and from five soybean cultivars (IAC 31-Foscarin, IAC-15, IAC-14, IAS-5 and Iguacu) were evaluated in 1993 and 1994, respectively, in terms of physiological seed quality by the mechanical damage (MD), standard germination (SG), accelerated aging (AA), electrical conductivity (EC), and seedling field emergence (FE) tests. Significant correlations were detected between SG, AA and EC and FE. However, in terms of the cultivar or the year, the degree of association among these parameters can change based on the environmental conditions of each year.

Novel high-power-factor isolated electronic ballast for multiple tubular fluorescent lamps

This paper presents a novel isolated electronic ballast for multiple fluorescent lamps, featuring high power-factor, and high efficiency. Two stages compose this new electronic ballast, namely, a new voltage step-down isolated Sepic rectifier, and a classical resonant Half-Bridge inverter. The new isolated Sepic rectifier is obtained from a Zero-Current-Switching (ZCS) Pulse-Width-Modulated (PWM) soft-commutation cell. The average-current control technique is used in this preregulator stage in order to provide low phase displacement and low Total-Harmonic-Distortion (THD) at input current, resulting in high power-factor, and attending properly IEC 61000-3-2 standards. The resonant Half-Bridge inverter performs Zero-Voltage-Switching (ZVS), providing conditions for the obtaining of overall high efficiency. It is developed a design example for the new isolated electronic ballast rated at 200W output power, 220Vrms input voltage, 115Vdc dc link voltage, with rectifier and inverter stages operating at 50kHz. Finally, experimental results are presented in order to verify the developed analysis. The THD at input current is equal to 5.25%, for an input voltage THD equal to 1.63%, and the measured overall efficiency is about 88.25%, at rated load.

Avaliação de genótipos de soja em semeadura de inverno, em Selvíria, MS: Produção e qualidade fisiológica de sementes

The sowing of soybean out of the conventional period is an option for the production of seeds with high physiological quality. On the other hand, this fact makes necessary the search for cultivars adapted to new environmental conditions. Therefore, additional research is needed to supply more information to producers related to the choice of the most suited cultivars with regard to high seed quality. This research was conducted in Selvíria, MS, Brazil in which the cultivars FT-2000, FT-Inaê, Embrapa 20 (Doko RC), CAC-1, IAC-17, IAC-18, IAC-19, IAC-8-2, FT-101, FT-109, MT/ BR 45 (Paiaguás), MT/BR 50 (Parecis), MT/BR 52 (Curió), MT/BR 53 (Tucano), MT/BR 47 (Canário), MT/BR 49 (Pioneira), BRSMT Uirapuru, BR Emgopa 314 (Garça Branca), MG/BR 46 (Conquista), FT-Estrela, FT-Cometa, Dourados, JAB-11, BR 9 (Savana), FT-Abyara, Embrapa 30 (Vale do Rio Doce), Embrapa 9 (Bays), Embrapa 31 (Mina), IAC-16; IAS 5, EMGOPA-304, and IAC-Foscarin 31 were studied. These cultivars were sown on June 5, 1998, and evaluated both for agronomic characteristics and the physiological potential of the seeds. The experimental units were arranged in the field according to a randomized complete block design with five replicates. The cultivars more adapted to the climatic conditions were Parecis, Bays, CAC-1, Garça Branca, Paiaguás, Pioneira, and IAC-16. It was concluded that winter sowing should start at the beginning of May, with water supply, since June was found to be too late.

Generalization of Wye and Delta auto-connections: Analysis of voltages and currents

Multipulse rectifier topologies based on autoconnections, or differential connections, are more and more applied as interface stages between the mains and power converters. These topologies mitigate many low-order current harmonics in the utility, reducing the THD (total harmonic distortion) and increasing the power factor. This paper presents a mathematical model based on phasor diagrams, that results in a single expression able to unify all differential topologies connections (Delta and Wye), for both step-up or step-down autotransformers, for 12 and 18-pulse AC-DC converters. The proposed family of converters can be designed for any relationship between the input voltage and the load voltage. An immediate application would be the retrofit, i.e. to replace a conventional rectifier with poor quality of the processed energy by the 12 or 18 pulses rectifier with Wye or Delta-differential connection. The design procedure, simple and fast, is developed and tested for a prototype rating 6 kW and 250 V on the DC load © 2010 IEEE.

Sistema especialista para a monitoração do processo de degradação de medidores tipo indução de energia elétrica ativa

This paper presents a methodology and software for hazard rate analysis of induction type watt-hour meters, considering the main variables related with the degradation process of these meters, for the Elektro Electricity and Services SA. The modeling developed to calculate the watt-hour meters hazard rate was implemented in a tool through a user friendly platform, in Delphi language, enabling not only hazard rate analysis, but also a classification by risk range, localization of installation for the analyzed meters, and, allowing, through an expert system, the sampling of induction type watt-hour meters, based on the model risk developed with artificial intelligence, with the mainly goal of follow and manage the process of degradation, maintenance and replacement of these meters. © 2010 IEEE.

Conversor CA-CA de elevado fator de potência para aplicações com geradores de Ímã permanente

This paper proposes and describes a high power factor AC-AC converter for naval applications using Permanent Magnet Generator (PMG). The three-phase output voltages of the PMG vary from 260 Vrms (220 Hz) to 380 Vrms (360 Hz), depending on load conditions. The proposed converter consists of a Y-/ΔY power transformer, which provides electrical isolation between the PMG and remaining stages, and a twelve-pulse uncontrolled rectifier stage directly connected to a single-phase inverter stage, without the use of an intermediary DC-DC topology. This proposal results in more simplicity for the overall circuitry, assuring robustness, reliability and reduced costs. Furthermore, the multipulse rectifier stage is capable to provide high power factor and low total harmonic distortion for the input currents of the converter. The single-phase inverter stage was designed to operate with wide range of DC bus voltage, maintaining 120 Vrms, 60 Hz output. The control philosophy, implemented in a digital signal processor (DSP) which also contains protection routines, alows series connections between two identical converters, achieving 240 Vrms, 60 Hz total output voltage. Measured total harmonic distortion for the AC output voltage is lower than 2% and the input power factor is 0.93 at 3.6kW nominal load. © 2010 IEEE.

Inversor CS Boost monofásico em aplicações com fontes renováveis

This paper presents a new methodology for the operation and control of a single-phase current-source (CS) Boost Inverter, considering that the conventional current-source inverter (CSI) has a right-half-plane (RHP) zero in its control-to-output transfer function, and this RHP zero causes the known non-minimum-phase effects. In this context, a special design with low boost inductance and a multi-loop control is developed in order to assure stable and very fast dynamics. Furthermore, the Inverter presents output voltage with very low total harmonic distortion (THD), reduced components and high power density. Therefore, this paper presents the inverter operation, the proposed control technique, and main simulation and experimental results in order to demonstrate the feasibility of the proposal. © 2010 IEEE.