Portland cement use in dental root perforations: a long term followup

Root canal and furcal perforations are causes of endodontic therapy failure and different materials that stimulate tissue mineralization have been proposed for perforation treatment. In the first case, a patient presented tooth 46 with unsatisfactory endodontic treatment and a periapical radiographic lesion. A radiolucent area compatible with a perforating internal resorption cavity was found in the mesial root. The granulation tissue was removed, and root canals were prepared. The intracanal medication was composed of calcium hydroxide and the perforation cavity was filled with Portland cement. The 11-year followup showed radiographic repair of the tissue adjacent to the perforation and absence of clinical signs and symptoms or periapical lesion. In the second case, a patient presented with edema on the buccal surface of tooth 46. The examination showed a radiolucent area in the furcation region compatible with an iatrogenic perforation cavity. The mesial root canals were calcified, and only the distal root canal was prepared. The cavity was filled with a calcium hydroxide-based paste and the distal root canal was obturated. In sequence, the perforation cavity was filled with Portland cement. The 9-year followup showed the tooth in masticatory function with radiographic and clinical aspects compatible with normality.

Oral health status of people living with HIV/AIDS attending a specialized service in Brazil

Verify factors that influence the oral health status of people living with HIV/AIDS (PLWHA) in Brazil. The study was cross-sectional and includes 177 HIV-positive individuals, who answered questionnaire on the sociodemographic conditions, HIV aspects, habits, and satisfaction with the service. The oral health data were collected by means of the decayed, missing, and filled teeth (DMFT) index, use and need of dentures, and the Community Periodontal Index. Average number of the DMFT was 17.64. Most HIV-positive patients presented good periodontal status, 35.0% used dentures, 41.5% needed denture in the maxilla, and 62.0% in the mandible. In the multivariate analysis, older age and dissatisfaction with health care were associated with nonuse of dentures. The abandonment of the use of antiretroviral therapy increased the risk of PLWHA presenting more than three decayed teeth. Poor oral health of the PLWHA was mainly influenced by sociodemographic factors and use and satisfaction with service.

Lateral pterygoid muscle volume and migraine in patients with temporomandibular disorders

Lateral pterygoid muscle (LPM) plays an important role in jaw movement and has been implicated in Temporomandibular disorders (TMDs). Migraine has been described as a common symptom in patients with TMDs and may be related to muscle hyperactivity. This study aimed to compare LPM volume in individuals with and without migraine, using segmentation of the LPM in magnetic resonance (MR) imaging of the TMJ. Twenty patients with migraine and 20 volunteers without migraine underwent a clinical examination of the TMJ, according to the Research Diagnostic Criteria for TMDs. MR imaging was performed and the LPM was segmented using the ITK-SNAP 1.4.1 software, which calculates the volume of each segmented structure in voxels per cubic millimeter. The chi-squared test and the Fisher's exact test were used to relate the TMD variables obtained from the MR images and clinical examinations to the presence of migraine. Logistic binary regression was used to determine the importance of each factor for predicting the presence of a migraine headache. Patients with TMDs and migraine tended to have hypertrophy of the LPM (58.7%). In addition, abnormal mandibular movements (61.2%) and disc displacement (70.0%) were found to be the most common signs in patients with TMDs and migraine. In patients with TMDs and simultaneous migraine, the LPM tends to be hypertrophic. LPM segmentation on MR imaging may be an alternative method to study this muscle in such patients because the hypertrophic LPM is not always palpable.

Brazilian dentistry profiles and workforce

The aim of this study was to assess the dentistry profile, based on social and demographic data, post-graduation formation, and to verify the insertion of dental graduates in the labour force. The participants were professionals graduated from a Brazilian Public Dental School, between 2000 and 2010. An instrument was sent by mail and/or e-mail to them. It was used Kruskal Wallis Test. Among 1047 questionnaires, 189 returned and 65.6% were answered by female. In relation to post-graduation course, 57.7% of professionals performed it, however 56.9% not attended only in their area; 66.6% of professionals are concentrated in cities larger than 100 thousand habitants. There was association between income and gender, and others. The predominant work modality was self-employed. Among the total, 36.5% want to work part-time in dentistry. The female gender was predominant and there was wage discrepancy between genders. The professionals have been concentrated in largest cities.

Different esthetic techniques used in combination to improve the smile

This is a clinical case report of a patient who presented with dental stains in the buccal and proximal aspects of the anterior teeth. Buccal stains were removed using the enamel microabrasion technique, and vital tooth bleaching with carbamide peroxide was also performed. Restorative procedures employing composite resin were done for a better result in the proximal aspect of teeth. Clinical significance: The authors observed the combination of these esthetic techniques improved the patient's smile. Today, dental esthetics attempts to imitate natural teeth by making them white, well-shaped, and aligned with no spots. This has enabled the development of several esthetic techniques, such as microabrasion to remove dental enamel surface stains and surface irregularities,1-6 and vital tooth bleaching to treat yellowish teeth.7 The enamel microabrasion technique uses different abrasive agents associated with chemical solutions,1,2,4,6 allowing the removal of intrinsic, hard-texture stains, and different coloring spots on the enamel surface, as well as correction of irregularities on the dental buccal surface.1,8 The various microabrasive products include the Opalustre® (Ultradent Products, http://www.ultradent.com)or Prema® Compound (Premier Dental Products, http://www.premusa.com), a low-concentration hydrochloric acid product associated with silica microparticles that is certainly effective for microabrasion technique,4,6,9,10 providing a good safety profile for the patient and professional. The microabrasion technique also promotes micro-reduction on the adamantine surface.4,5,10 In some cases, after its completion, microabrasion may cause teeth to become darker or yellowish because of the thinner remaining enamel surface, leading to more evident observation of the dentinal tissue, which in general determines tooth color. In these clinical conditions, correction of the color pattern of dental elements can be obtained with carbamide peroxide products applied in custom trays, such as the bleaching products Whiteness Perfect at 10% or 16% (FGM Productos Odontologicos, http://www.fgm.ind.br) or Opalescence® at 10% or 15% (Ultradent Products), with a considerable margin of clinical success, provided it is well indicated, well performed, and supervised by the professional.4,6,9,10 Considering all the aforementioned aspects, the authors present a clinical case about a dental-enamel microabrasion technique used to remove buccal enamel surface stains associated with dental vital bleaching and restorative procedures in the proximal aspect of anterior teeth. - See more at: https://www.dentalaegis.com/cced/2010/08/different-esthetic-techniques-used-in-combination-to-recover-the-smile#sthash.McFoH7El.dpuf

Actinic Cheilitis: epidemiological study in a riverine population of northern Brazil

AIM: The aim of this survey was to assess the prevalence of AC in riverine population in countryside of Amazonas, northern Brazil. MATERIAL AND METHODS: Patients answered a questionnaire and were examined between January and December of 2008. Data were gathered on the following participant’s characteristics: 1) age group; 2) gender; 3) ethnicity 4) outdoor activities (sunlight exposure); 5) smoking habits; 6) drinking habits; and 7) access to oral health services (the last dental visit). Clinical observation of the lips for determination of AC presence was used. Patients who presented clinical manifestation of moderate and severe AC were submitted to incisional biopsy to confirm the diagnosis. In case of a positive result after histopathological examination, patients were advised and appropriate treatment was offered. All patients received information about AC and its'prevention. RESULTS: Among the 200 participants that were examined, the prevalence of AC was 2% (4 cases). Of all patients surveyed, women were the majority totalizing 124 patients (72.0%). According to age, 48 (24.0%) people were 20g34 yeargold; 42 (21.0%) were 35g44gyeargold; 50 (25.0%) were 45g60gyeargold; and 60 (30.0%) were 61 or older. CONCLUSION: Even though AC was present in a low prevalence rate, an epidemiological variety is expected, once geographic and ethnic differences should be considered.

The effect of a Lucia jig for 30 minutes on neuromuscular re-programming, in normal subjects

The Lucia jig is a technique that promotes neuromuscular reprogramming of the masticatory system and allows the stabilization of the mandible without the interference of dental contacts, maintaining the mandible position in harmonic condition with the musculature in normal subjects or in patients with temporomandibular dysfunction (TMD). This study aimed to electromyographically analyze the activity (RMS) of the masseter and temporal muscles in normal subjects (control group) during the use of an anterior programming device, the Lucia jig, in place for 0, 5, 10, 20 and 30 minutes to demonstrate its effect on the stomatognathic system. Forty-two healthy dentate individuals (aged 21 to 40 years) with normal occlusion and without parafunctional habits or ternporomandibular dysfunction (RDC/TMD) were evaluated on the basis of the electromyographic activity of the masseter and temporal muscles before placement of a neuromuscular re-programming device, the Lucia jig, on the upper central incisors. There were no statistically significant differences (p < 0.05) in the electromyographic activity of the masticatory muscles in the different time periods. The Lucia jig changed the electromyographic activity by promoting a neuromuscular reprogramming. In most of the time periods, it decreased the activation of the masticatory muscles, showing that this device has wide applicability in dentistry. The use of a Lucia jig over 0, 5, 10, 15, 20 and 30 minutes did not promote any statistically significant increase in muscle activity despite differences in the data, thus showing that this intra-oral device can be used in dentistry.

Bilateral mesiodens in monozygotic twins: 3D diagnostic and management

Mesiodens is the most frequent type of supernumerary tooth and may occur in several forms, causing different local disorders, such as impaction of the anterior permanent teeth. High-resolution three-dimensional (3D) images have improved the diagnosis and treatment plan of patients with impacted and supernumerary teeth. The purpose of this paper was to report a case of two mesiodens in monozygotic twin boys with appropriate 3D diagnostic and treatment plan

SEM analysis and push-out bond strength of fiberglass posts luted with different cements of glass-ionomer in humid environment: pilot test

The objective of this study was to evaluate the push-out bond strength of fiberglass resin reinforced bonded with five ionomer cements. Also, the interface between cement and dentin was inspected by means of SEM. Fifty human canines were chose after rigorous scrutiny process, endodontically treated and divided randomly into five groups (n = 3) according to cement tested: Group I – Ionoseal (VOCO), Group II – Fugi I (GC), Group III – Fugi II Improved (GC), Group IV – Rely X Luting 2 (3M ESPE), Group V – Ketac Cem (3M ESPE). The post-space was prepared to receive a fiberglass post, which was tried before cementation process. No dentin or post surface pretreatment was carried out. After post bonding, all roots were cross-sectioned to acquire 3 thin-slices (1 mm) from three specific regions of tooth (cervical, medium and apical). A Universal test machine was used to carry out the push-out test with cross-head speed set to 0.5mm/mim. All failed specimens were observed under optical microscope to identify the failure mode. Representative specimens from each group was inspected under SEM. The data were analyzed by Kolmogorov-Smirnov and Levene’s tests and by two-way ANOVA, and Tukey’s port hoc test at a significance level of 5%. It was compared the images obtained for determination of types of failures more occurred in different levels. SEM inspection displayed that all cements filled the space between post and dentin, however, some imperfections such bubles and voids were noticed in all groups in some degree of extension. The push-out bond strength showed that cement Ketac Cem presented significant higher results when compared to the Ionoseal (P = 0.02). There were no statistical significant differences among other cements.

Studio degli effetti della mordenzatura con acido fluoridrico sul disilicato di litio utilizzato in odontoiatria

Scopo dello studio: valutare i cambiamenti indotti da diversi trattamenti di mordenzatura sulla morfologia superficiale e sulla microstruttura di due vetro-ceramiche a base disilicato di litio (IPS e.max® Press e IPS e.max® CAD) ed esaminarne gli effetti sia sull’adesione con un cemento resinoso che sulla resistenza alla flessione. Materiali e metodi: Settanta dischetti (12 mm di diametro, 2 mm di spessore) di ogni ceramica sono stati preparati e divisi in 5 gruppi: nessun trattamento (G1), HF 5% 20s (G2), HF 5% 60s (G3), HF 9.6% 20s (G4), HF 9.6% 60s (G5). Un campione per ogni gruppo è stato analizzato mediante profilometro ottico e osservato al SEM. Per gli altri campioni è stato determinato lo shear bond strength (SBS) con un cemento resinoso. Dopo l’SBS test, i campioni sono stati caricati fino a frattura utilizzando il piston-on-three-ball test per determinarne la resistenza biassiale alla flessione. Risultati: L’analisi morfologica e microstrutturale dei campioni ha rivelato come diversi trattamenti di mordenzatura producano delle modifiche nella rugosità superficiale che non sono direttamente collegate ad un aumento dei valori di adesione e dei cambiamenti microstrutturali che sono più rilevanti con l’aumento del tempo di mordenzatura e di concentrazione dell’acido. I valori medi di adesione (MPa) per IPS e.max® CAD sono significativamente più alti in G2 e G3 (21,28 +/- 4,9 e 19,55 +/- 5,41 rispettivamente); per IPS e.max® Press, i valori più elevati sono in G3 (16,80 +/- 3,96). La resistenza biassiale alla flessione media (MPa) è più alta in IPS e.max® CAD (695 +/- 161) che in IPS e.max® Press (588 +/- 117), ma non è non influenzata dalla mordenzatura con HF. Conclusioni: il disilicato di litio va mordenzato preferibilmente con HF al 5%. La mordenzatura produce alcuni cambiamenti superficiali e microstrutturali nel materiale, ma tali cambiamenti non ne influenzano la resistenza in flessione.

Teeth restored using fiber-reinforced posts: in vitro fracture tests and finite element analysis

In dentistry the restoration of decayed teeth is challenging and makes great demands on both the dentist and the materials. Hence, fiber-reinforced posts have been introduced. The effects of different variables on the ultimate load on teeth restored using fiber-reinforced posts is controversial, maybe because the results are mostly based on non-standardized in vitro tests and, therefore, give inhomogeneous results. This study combines the advantages of in vitro tests and finite element analysis (FEA) to clarify the effects of ferrule height, post length and cementation technique used for restoration. Sixty-four single rooted premolars were decoronated (ferrule height 1 or 2 mm), endodontically treated and restored using fiber posts (length 2 or 7 mm), composite fillings and metal crowns (resin bonded or cemented). After thermocycling and chewing simulation the samples were loaded until fracture, recording first damage events. Using UNIANOVA to analyze recorded fracture loads, ferrule height and cementation technique were found to be significant, i.e. increased ferrule height and resin bonding of the crown resulted in higher fracture loads. Post length had no significant effect. All conventionally cemented crowns with a 1-mm ferrule height failed during artificial ageing, in contrast to resin-bonded crowns (75% survival rate). FEA confirmed these results and provided information about stress and force distribution within the restoration. Based on the findings of in vitro tests and computations we concluded that crowns, especially those with a small ferrule height, should be resin bonded. Finally, centrally positioned fiber-reinforced posts did not contribute to load transfer as long as the bond between the tooth and composite core was intact.

Eros and Transgression in an Age of Immanence: Georges Bataille’s (Religious) Critique of Kinsey

This paper explores the religious implications of eroticism in Western culture since the Sexual Revolution, a period at once applauded for its open and immanent view of sexuality and denounced for its shamelessness and promiscuity. After discussing the work and effects of Alfred C. Kinsey, the father of the Sexual Revolution, I focus on a critical appraisal of Kinsey written by French theorist Georges Bataille (“Kinsey, the Underworld and Work,” in L’Erotisme, 1957). Bataille situates contemporary Western sexuality within a larger historical movement towards the “desacralization” of all aspects of human life: sex, under the scientific gaze of the Kinsey team, became simply another “object” to be analyzed and classified, and “good” sex defined solely in terms of frequency and explosiveness of orgasm. For many, including Hugh Hefner, this approach to sex occasioned a refreshing awakening from the long dark night of Victorian sexual repression. However, as Bataille’s protégé Foucault has shown, the scientific approach to sexuality often masks a desire to control and delimit sexual behaviour, not “liberate” it. Moreover, Bataille makes the point that the desacralization of sexuality denudes sex of a vital component—eroticism—which is necessary for real pleasure and ecstasy. Beyond the “moral” critiques one often hears leveled against Kinsey and his work, Bataille provides a “religious” critique, one that stands, perhaps surprisingly, on the “near side” of sexuality.

Parameters of Reform and Unification in Modern Japanese Buddhist Thought: Murakami Senshō and Critical Buddhism

Reform is a word that, one might easily say, characterizes more than any other the history and development of Buddhism. Yet, it must also be said that reform movements in East Asian Buddhism have often taken on another goal—harmony or unification; that is, a desire not only to reconstruct a more worthy form of Buddhism, but to simultaneously bring together all existing forms under a single banner, in theory if not in practice. This paper explores some of the tensions between the desire for reform and the quest for harmony in modern Japanese Buddhism thought, by comparing two developments: the late 19th century movement towards ‘New Buddhism’ (shin Bukkyō) as exemplified by Murakami Senshō 村上専精 (1851–1929), and the late 20th century movement known as ‘Critical Buddhism’ (hihan Bukkyō), as found in the works of Matsumoto Shirō 松本史朗 and Hakamaya Noriaki 袴谷憲昭. In all that has been written about Critical Buddhism, in both Japanese and English, very little attention has been paid to the place of the movement within the larger traditions of Japanese Buddhist reform. Here I reconsider Critical Buddhism in relation to the concerns of the previous, much larger trends towards Buddhist reform that emerged almost exactly 100 years previous—the so-called shin Bukkyō or New Buddhism of the late-Meiji era. Shin Bukkyō is a catch-all term that includes the various writings and activities of Inoue Enryō, Shaku Sōen, and Kiyozawa Manshi, as well as the so-called Daijō-hibussetsuron, a broad term used (often critically) to describe Buddhist writers who suggested that Mahāyāna Buddhism is not, in fact, the Buddhism taught by the ‘historical’ Buddha Śākyamuni. Of these, I will make a few general remarks about Daijō-hibusseturon, before turning attention more specifically to the work of Murakami Senshō, in order to flesh out some of the similarities and differences between his attempt to construct a ‘unified Buddhism’ and the work of his late-20th century avatars, the Critical Buddhists. Though a number of their aims and ideas overlap, I argue that there remain fundamental differences with respect to the ultimate purposes of Buddhist reform. This issue hinges on the implications of key terms such as ‘unity’ and ‘harmony’ as well as the way doctrinal history is categorized and understood, but it also relates to issues of ideology and the use and abuse of Buddhist doctrines in 20th-century politics.

[Current concepts in tobacco cessation and prevention]

In the recent years, for oral care in general, both improving oral hygiene and tobacco use cessation have been identified as necessary measures to gain and maintain long-term periodontal health. This growing evidence has given the dental team a whole new task to tackle when achieving and maintaining oral health with their patients. In order to support dental patients to quit tobacco use, it is helpful for the clinician to have a clear understanding of the genesis of 'tobacco use disease' in general. At present, the evidence-based method for tobacco use cessation consists of professional counselling on behavioural change using the so called "5A Method" (Ask, Advise, Assess, Assist and Arrange") in combination with pharmacotherapy. A suitable model for behavioural support in tobacco use cessation would help patients to move from one stage to the next. People who want to quit the smoking habit do not always participate in carefully controlled nicotine withdrawal programs, e.g. in linear fashion and from start to finish. Nevertheless, simple instructions - like those offered in the "Assist" (to help) and "Arrange" (to organize follow-up visits) - can be valuable tools for dental professionals supporting their patients to quit smoking. On the basis of significant evidence on the recovery of the oral mucosa and the periodontal tissue following tobacco use cessation, a new task has been emerged in dentistry: the role of oral health professionals providing counselling for patients who ought to quit tobacco use.

Predicting failure in mammalian enamel

Dentition is a vital element of human and animal function, yet there is little fundamental knowledge about how tooth enamel endures under stringent oral conditions. This paper describes a novel approach to the issue. Model glass dome specimens fabricated from glass and back­filled with polymer resin are used as representative of the basic enamel/dentine shell structure. Contact loading is used to deform the dome structures to failure, in simulation of occlusal loading with opposing dentition or food bolus. To investigate the role of enamel microstructure, additional contact tests are conducted on two­phase materials that capture the essence of the mineralized­rod/organic­sheath structure of dental enamel. These materials include dental glass­ceramics and biomimicked composites fabricated from glass fibers infiltrated with epoxy. The tests indicate how enamel is likely to deform and fracture along easy sliding and fracture paths within the binding phase between the rods. Analytical relations describing the critical loads for each damage mode are presented in terms of material properties (hardness, modulus, toughness) and tooth geometry variables (enamel thickness, cusp radius). Implications in dentistry and evolutionary biology are discussed.