972 resultados para Elasticity and anelasticity
Resumo:
The vascular properties of large vessels in the obese have not been adequately studied. We used cardiovascular magnetic resonance imaging to quantify the cross-sectional area and elastic properties of the ascending thoracic and abdominal aorta in 21 clinically healthy obese young adult men and 25 men who were age-matched lean controls. Obese subjects had greater maximal cross-sectional area of the ascending thoracic aorta (984 +/- 252 vs 786 +/- 109 mm(2), p <0.01) and of the abdominal aorta (415 +/- 71 vs 374 +/- 51 mm(2), p <0.05). When indexed for height the differences persisted, but when indexed for body surface area, a significant difference between groups was found only for the maximal abdominal aortic cross-sectional area. The obese subjects also had decreased abdominal aortic elasticity, characterized by 24% lower compliance (0.0017 +/- 0.0004 vs 0.0021 +/- 0.0005 mm(2)/kPa/mm, p <0.01), 22% higher stiffness index beta (6.0 +/- 1.5 vs 4.9 +/- 0.7, p <0.005), and 41% greater pressure-strain elastic modulus (72 +/- 25 vs 51 +/- 9, p <0.005). At the ascending thoracic aorta, only the pressure-strain elastic modulus was different between obese and lean subjects (85 +/- 42 vs 65 +/- 26 kPa, respectively; p <0.05), corresponding to a 31% difference-but arterial compliance and stiffness index were not significantly different between groups. In clinically healthy young adult obese men, obesity is associated with increased cross-sectional aortic area and decreased aortic elasticity.
Resumo:
The object of this study was to evaluate the contribution of carotid distensibilty on baroreflex sensitivity in patients with type 2 diabetes mellitus with at least 2 additional cardiovascular risk factors. Carotid distensibility was measured bilaterally at the common carotid artery in 79 consecutive diabetic patients and 60 matched subjects without diabetes. Spontaneous baroreflex sensitivity assessment was obtained using time and frequency methods. Baroreflex sensitivity was lower in diabetic subjects as compared with nondiabetic control subjects (5.25+/-2.80 ms/mm Hg versus 7.55+/-3.79 ms/mm Hg; P<0.01, respectively). Contrary to nondiabetic subjects, diabetic subjects showed no significant correlation between carotid distensibility and baroreflex sensitivity (r2=0.08, P=0.04 and r2=0.04, P=0.13, respectively). In diabetic subjects, baroreflex sensitivity was significantly lower in subjects with peripheral neuropathy than in those with preserved vibration sensation (4.1+/-0.5 versus 6.1+/-0.4 ms/mm Hg, respectively; P=0.005). Age in nondiabetic subjects, diabetes duration, systolic blood pressure, peripheral or sensitive neuropathy, and carotid distensibility were introduced in a stepwise multivariate analysis to identify the determinants of baroreflex sensitivity. In diabetic patients, neuropathy is a more sensitive determinant of baroreflex sensitivity than the reduced carotid distensibility (stepwise analysis; F ratio=5.1, P=0.028 versus F ratio=1.9, P=0.16, respectively). In diabetic subjects with 2 additional cardiovascular risk factors, spontaneous baroreflex sensitivity is not related to carotid distensibility. Diabetic subjects represent a particular population within the spectrum of cardiovascular risk situations because of the marked neuropathy associated with their metabolic disorder. Therefore, neuropathy is a more significant determinant of baroreflex sensitivity than carotid artery elasticity in patients with type 2 diabetes.
Resumo:
Usingof belt for high precision applications has become appropriate because of the rapid development in motor and drive technology as well as the implementation of timing belts in servo systems. Belt drive systems provide highspeed and acceleration, accurate and repeatable motion with high efficiency, long stroke lengths and low cost. Modeling of a linear belt-drive system and designing its position control are examined in this work. Friction phenomena and position dependent elasticity of the belt are analyzed. Computer simulated results show that the developed model is adequate. The PID control for accurate tracking control and accurate position control is designed and applied to the real test setup. Both the simulation and the experimental results demonstrate that the designed controller meets the specified performance specifications.
Resumo:
In this thesis, the sorption and elastic properties of the cation-exchange resins were studied to explain the liquid chromatographic separation of carbohydrates. Na+, Ca2+ and La3+ form strong poly(styrene-co-divinylbenzene) (SCE) as well as Na+ and Ca2+ form weak acrylic (WCE) cation-exchange resins at different cross-link densities were treated within this work. The focus was on the effects of water-alcohol mixtures, mostly aqueous ethanol, and that of the carbohydrates. The carbohydrates examined were rhamnose, xylose, glucose, fructose, arabinose, sucrose, xylitol and sorbitol. In addition to linear chromatographic conditions, non-linear conditions more typical for industrial applications were studied. Both experimental and modeling aspectswere covered. The aqueous alcohol sorption on the cation-exchangers were experimentally determined and theoretically calculated. The sorption model includes elastic parameters, which were obtained from sorption data combined with elasticity measurements. As hydrophilic materials cation-exchangers are water selective and shrink when an organic solvent is added. At a certain deswelling degree the elastic resins go through glass transition and become as glass-like material. Theincreasing cross-link level and the valence of the counterion decrease the sorption of solvent components in the water-rich solutions. The cross-linkage or thecounterions have less effect on the water selectivity than the resin type or the used alcohol. The amount of water sorbed is higher in the WCE resin and, moreover, the WCE resin is more water selective than the corresponding SCE resin. Theincreased aliphatic part of lower alcohols tend to increase the water selectivity, i.e. the resins are more water selective in 2-propanol than in ethanol solutions. Both the sorption behavior of carbohydrates and the sorption differences between carbohydrates are considerably affected by the eluent composition and theresin characteristics. The carbohydrate sorption was experimentally examined and modeled. In all cases, sorption and moreover the separation of carbohydrates are dominated by three phenomena: partition, ligand exchange and size exclusion. The sorption of hydrophilic carbohydrates increases when alcohol is added into the eluent or when carbohydrate is able to form coordination complexes with the counterions, especially with multivalent counterions. Decreasing polarity of the eluent enhances the complex stability. Size exclusion effect is more prominent when the resin becomes tighter or carbohydrate size increases. On the other hand,the elution volumes between different sized carbohydrates decreases with the decreasing polarity of the eluent. The chromatographic separation of carbohydrateswas modeled, using rhamnose and xylose as target molecules. The thermodynamic sorption model was successfully implemented in the rate-based column model. The experimental chromatographic data were fitted by using only one adjustable parameter. In addition to the fitted data also simulated data were generated and utilized in explaining the effect of the eluent composition and of the resin characteristics on the carbohydrate separation.
Resumo:
[cat] El comerç internacional en béns agrícoles té el potencial d'accelerar la transformació estructural dels països amb baixa productivitat agrícola perquè els dóna la possiblitat d'importar aliments. L'objectiu d'aquest article és estudiar l'importància del comerç internacional en aquest context a través dels exemples de Corea del Sud i el Regne Unit. Per fer l'anàlisi, introdueixo comerç internacional en un model de creixement neoclàssicc amb dos sectors, agricultura i no-agricultura. Una característica clau del model és la baixa elasticitat-ingrés del bé agrícola.
Resumo:
[cat] El comerç internacional en béns agrícoles té el potencial d'accelerar la transformació estructural dels països amb baixa productivitat agrícola perquè els dóna la possiblitat d'importar aliments. L'objectiu d'aquest article és estudiar l'importància del comerç internacional en aquest context a través dels exemples de Corea del Sud i el Regne Unit. Per fer l'anàlisi, introdueixo comerç internacional en un model de creixement neoclàssicc amb dos sectors, agricultura i no-agricultura. Una característica clau del model és la baixa elasticitat-ingrés del bé agrícola.
Resumo:
ABSTRACT Dual-trap optical tweezers are often used in high-resolution measurements in single-molecule biophysics. Such measurements can be hindered by the presence of extraneous noise sources, the most prominent of which is the coupling of fluctuations along different spatial directions, which may affect any optical tweezers setup. In this article, we analyze, both from the theoretical and the experimental points of view, the most common source for these couplings in dual-trap optical-tweezers setups: the misalignment of traps and tether. We give criteria to distinguish different kinds of misalignment, to estimate their quantitative relevance and to include them in the data analysis. The experimental data is obtained in a, to our knowledge, novel dual-trap optical-tweezers setup that directly measures forces. In the case in which misalignment is negligible, we provide a method to measure the stiffness of traps and tether based on variance analysis. This method can be seen as a calibration technique valid beyond the linear trap region. Our analysis is then employed to measure the persistence length of dsDNA tethers of three different lengths spanning two orders of magnitude. The effective persistence length of such tethers is shown to decrease with the contour length, in accordance with previous studies.
Resumo:
Työn tavoitteena oli luoda malli, jonka avulla voitaisiin ennustaa kartonkituotteiden hinnan ja kysynnän kehitystä. Työssä kerättiin aluksi tietoa kartonkimarkkinoista haastattelujen ja tilastotietojen avulla. Näiden perusteella luotiin malli, joka kuvaa kartonkimarkkinoiden ja -teollisuuden rakennetta. Erityisesti kiinnitettiin huomiota asiakkaiden tilauskäyttäytymiseen, tuotannonohjaukseen sekä hinnan muodostumiseen. Työssä käytettiin ennustemenetelmänä systeemidynamiikkaa. Oleellista oli löytää systeemissä esiintyvät tärkeimmät takaisinkytkennät ja systeemin avainmuuttujat. Kun kaikille mallin muuttujille oli määritetty yhtälöt ja vakioille annettu arvot, voitiin mallia simuloida, ja saada ennusteet halutuille muuttujille. Työssä esitettiin ennusteet kartonkimarkkinoiden tärkeimmille parametreille kahden vuoden päähän. Työssä tarkasteltiin myös, miten muutokset mallin käyttäytymistä säätelevissä muuttujissa vaikuttavat tuloksiin. Jotta pystyttäisiin paremmin selvittämään koko kartonkiteollisuuden dynamiikka, lisätutkimusta tarvittaisiin vielä eri kartonkilajien substituutiomahdollisuuksista ja hintojen riippuvuuksista. Mielenkiintoista olisi myös tietää, miten tuotannon käyttöasteiden muutokset ja hinnan vaihtelut vaikuttavat liiketoiminnan kannattavuuteen valmistajien näkökulmasta.
Resumo:
Single-stranded DNA (ssDNA) plays a major role in several biological processes. It is therefore of fundamental interest to understand how the elastic response and the formation of secondary structures are modulated by the interplay between base pairing and electrostatic interactions. Here we measure force-extension curves (FECs) of ssDNA molecules in optical tweezers set up over two orders of magnitude of monovalent and divalent salt conditions, and obtain its elastic parameters by fitting the FECs to semiflexible models of polymers. For both monovalent and divalent salts, we find that the electrostatic contribution to the persistence length is proportional to the Debye screening length, varying as the inverse of the square root of cation concentration. The intrinsic persistence length is equal to 0.7 nm for both types of salts, and the effectivity of divalent cations in screening electrostatic interactions appears to be 100-fold as compared with monovalent salt, in line with what has been recently reported for single-stranded RNA. Finally, we propose an analysis of the FECs using a model that accounts for the effective thickness of the filament at low salt condition and a simple phenomenological description that quantifies the formation of non-specific secondary structure at low forces.
Resumo:
[cat] Mentre que una creixent literatura que ha examinat la relació entre la renda i la despesa sanitària suggereix que els serveis sanitaris són un be de luxe (elasticitat renda superior a la unitat), aquesta conclusió es contínuament debatuda atesa l'heterogeneïtat dels resultats. Aquest article testa la hipòtesis dels serveis sanitaris com bens de luxe fent server anàlisi de meta- regressió, particularment analitzant l'existència de biaixos de selecció de publicació, precisió així com biaixos d'agregació. Els resultats apunten l'existència d'un biaix de publicació, robust independentment dels controls analitzats. Els biaixos de precisió i agregació semblen tenir un paper en la generació de les estimacions de l'elasticitat renda. Els nostres resultat suggereixen que l'elasticitat renda dels serveis sanitaris un cop corregir pels biaixos esmentat varien entre 0.26 i 0.84, però no podem rebutjar que la elasticitat renda es igual a la unitat en algunes estimacions de l'elasticitat corregides.
Resumo:
[cat] Mentre que una creixent literatura que ha examinat la relació entre la renda i la despesa sanitària suggereix que els serveis sanitaris són un be de luxe (elasticitat renda superior a la unitat), aquesta conclusió es contínuament debatuda atesa l'heterogeneïtat dels resultats. Aquest article testa la hipòtesis dels serveis sanitaris com bens de luxe fent server anàlisi de meta- regressió, particularment analitzant l'existència de biaixos de selecció de publicació, precisió així com biaixos d'agregació. Els resultats apunten l'existència d'un biaix de publicació, robust independentment dels controls analitzats. Els biaixos de precisió i agregació semblen tenir un paper en la generació de les estimacions de l'elasticitat renda. Els nostres resultat suggereixen que l'elasticitat renda dels serveis sanitaris un cop corregir pels biaixos esmentat varien entre 0.26 i 0.84, però no podem rebutjar que la elasticitat renda es igual a la unitat en algunes estimacions de l'elasticitat corregides.
Resumo:
The importance of logistics for companies is a well known and justified issue. Today, enterprises are developing their logistics processes in order to match their products and services to the requirements of the most important customers. Therefore there is a need for developing analysing tools for logistics and especially for analysing the significance of various customer service elements. The aim of this paper is to propose analytic tools for supporting strategic level logistics decision making by emphasizing service level elements on two levels: (1) to introduce and propose approaches to categorize the developing efforts of logistics and (2) to introduce and/or propose approaches for solving some customer service related strategic level logistics problems. This study consists of two parts. In the first part an overview of the work is presented, and the second part comprises eight research papers on the topic of the study. The overview includes an introduction, where strategic and tactical level logistics problems are discussed and the relation of logistics to marketing and customer service issues is presented. In the first part of the study the objectives, the structure, the research strategy and the contribution of the research are described, and the challenges for future research are discussed. In the second part the three first papers deal with the identification of objectives for logistics while the remaining five papaers concentrate on solving customer service related strategic level logistics problems.
Resumo:
Background: Measurement of serum cotinine, a major metabolite of nicotine, provides a valid marker for quantifying exposure to tobacco smoke. Exposure to tobacco smoke causes vascular damage by multiple mechanisms, and it has been acknowledged as a risk factor for atherosclerosis. Multifactorial atherosclerosis begins in childhood, but the relationship between exposure to tobacco smoke and arterial changes related to early atherosclerosis have not been studied in children. Aims: The aim of the present study was to evaluate exposure to tobacco smoke with a biomarker, serum cotinine concentration, and its associations with markers of subclinical atherosclerosis and lipid profile in school-aged children and adolescents. Subjects and Methods: Serum cotinine concentration was measured using a gas chromatographic method annually between the ages 8 and 13 years in 538-625 children participating since infancy in a randomized, prospective atherosclerosis prevention trial STRIP (Special Turku coronary Risk factor Intervention Project). Conventional atherosclerosis risk factors were measured repeatedly. Vascular ultrasound studies were performed among 402 healthy 11-year-old children and among 494 adolescents aged 13 years. Results: According to serum cotinine measurements, a notable number of the school aged children and adolescents were exposed to tobacco smoke, but the exposure levels were only moderate. Exposure to tobacco smoke was associated with decreased endothelial function as measured with flow-mediated dilation of the brachial artery, decreased elasticity of the aorta, and increased carotid and aortic intima-media thickness. Longitudinal exposure to tobacco smoke was also related with increased apolipoprotein B and triglyceride levels in 13-year-old adolescents, whose body mass index and nutrient intakes did not differ. Conclusions: These findings suggest that exposure to tobacco smoke in childhood may play a significant role in the development of early atherosclerosis. Key Words: arterial elasticity, atherosclerosis, children, cotinine, endothelial function, environmental tobacco smoke, intima-media thickness, risk factors, ultrasound
Resumo:
In this work, we use the rule of mixtures to develop an equivalent material model in which the total strain energy density is split into the isotropic part related to the matrix component and the anisotropic energy contribution related to the fiber effects. For the isotropic energy part, we select the amended non-Gaussian strain energy density model, while the energy fiber effects are added by considering the equivalent anisotropic volumetric fraction contribution, as well as the isotropized representation form of the eight-chain energy model that accounts for the material anisotropic effects. Furthermore, our proposed material model uses a phenomenological non-monotonous softening function that predicts stress softening effects and has an energy term, derived from the pseudo-elasticity theory, that accounts for residual strain deformations. The model’s theoretical predictions are compared with experimental data collected from human vaginal tissues, mice skin, poly(glycolide-co-caprolactone) (PGC25 3-0) and polypropylene suture materials and tracheal and brain human tissues. In all cases examined here, our equivalent material model closely follows stress-softening and residual strain effects exhibited by experimental data
Resumo:
We estimate the determinants of capital intensity in Japan and the US, characterized by striking different paths. We augment an otherwise standard Constant Elasticity of Substitution (CES) model with demand-side considerations, which we find especially relevant in the US. In this augmented setting, the elasticity of substitution between capital and labor is placed around 0.85 in Japan, and 0.30 in the US. We also find evidence of biased technical change, which is capital-saving in Japan but labor-saving in the US. These differences help us explain the diverse experience in the capital deepening process of these economies, and lead us to conclude that demand-side drivers may also be relevant to account for different growth experiences. A close look at the nature of technological change is also needed before designing one-size-fits-all industrial, economic growth, and/or labor market policies.