An optimized ERP Brain-computer interface based on facial expression changes

OBJECTIVE: Interferences from spatially adjacent non-target stimuli are known to evoke event-related potentials (ERPs) during non-target flashes and, therefore, lead to false positives. This phenomenon was commonly seen in visual attention-based brain-computer interfaces (BCIs) using conspicuous stimuli and is known to adversely affect the performance of BCI systems. Although users try to focus on the target stimulus, they cannot help but be affected by conspicuous changes of the stimuli (such as flashes or presenting images) which were adjacent to the target stimulus. Furthermore, subjects have reported that conspicuous stimuli made them tired and annoyed. In view of this, the aim of this study was to reduce adjacent interference, annoyance and fatigue using a new stimulus presentation pattern based upon facial expression changes. Our goal was not to design a new pattern which could evoke larger ERPs than the face pattern, but to design a new pattern which could reduce adjacent interference, annoyance and fatigue, and evoke ERPs as good as those observed during the face pattern. APPROACH: Positive facial expressions could be changed to negative facial expressions by minor changes to the original facial image. Although the changes are minor, the contrast is big enough to evoke strong ERPs. In this paper, a facial expression change pattern between positive and negative facial expressions was used to attempt to minimize interference effects. This was compared against two different conditions, a shuffled pattern containing the same shapes and colours as the facial expression change pattern, but without the semantic content associated with a change in expression, and a face versus no face pattern. Comparisons were made in terms of classification accuracy and information transfer rate as well as user supplied subjective measures. MAIN RESULTS: The results showed that interferences from adjacent stimuli, annoyance and the fatigue experienced by the subjects could be reduced significantly (p < 0.05) by using the facial expression change patterns in comparison with the face pattern. The offline results show that the classification accuracy of the facial expression change pattern was significantly better than that of the shuffled pattern (p < 0.05) and the face pattern (p < 0.05). SIGNIFICANCE: The facial expression change pattern presented in this paper reduced interference from adjacent stimuli and decreased the fatigue and annoyance experienced by BCI users significantly (p < 0.05) compared to the face pattern.

Neurolinguistic measures of typological effects in multilingual transfer: introducing an ERP methodology

This article has two main objectives. First, we offer an introduction to the subfield of generative third language (L3) acquisition. Concerned primarily with modeling initial stages transfer of morphosyntax, one goal of this program is to show how initial stages L3 data make significant contributions toward a better understanding of how the mind represents language and how (cognitive) economy constrains acquisition processes more generally. Our second objective is to argue for and demonstrate how this subfield will benefit from a neuro/psycholinguistic methodological approach, such as event-related potential experiments, to complement the claims currently made on the basis of exclusively behavioral experiments.

Comparison of Two Rotary Systems in Root Canal Preparation Regarding Disinfection

Introduction: The aim of the present study was to determine the disinfection of preparations carried out by using the Protaper or MTwo system in canals infected with Enterococcus faecalis. Methods: Twenty-eight distobuccal canals of upper molars were used, in which the canals were sterilized after being enlarged to #20 file and then contaminated with an inoculation of a culture of E. faecalis. After the incubation period, bacterial samples were collected and were seeded on plates for analysis of colony-forming units (CFU)/mL. The teeth were divided into 2 groups according to the rotary system used for instrumentation; 2 noninstrumented teeth served as the control group. Then bacterial samples were collected and were seeded on plates for analysis of CFU/mL again. The data obtained were evaluated by the Wilcoxon and Mann-Whitney U tests. Results: Bacterial reduction was 81.94% and 84.29%, respectively, in Pro Taper and Mtwo systems, and there was no statistically significant difference (P > .05). Conclusions: Both systems, Pro Taper and Mtwo, reduced the amount of bacteria in the mechanical disinfection of the root canal system, demonstrating that they are suitable for this purpose. (J Endod 2010;36:1238-1240)

Combined solar and pellet heating systems for single-family houses : How to achieve decreased electricity usage, increased system efficiency and increased solar gains

In Sweden, there are about 0.5 million single-family houses that are heated by electricity alone, and rising electricity costs force the conversion to other heating sources such as heat pumps and wood pellet heating systems. Pellet heating systems for single-family houses are currently a strongly growing market. Future lack of wood fuels is possible even in Sweden, and combining wood pellet heating with solar heating will help to save the bio-fuel resources. The objectives of this thesis are to investigate how the electrically heated single-family houses can be converted to pellet and solar heating systems, and how the annual efficiency and solar gains can be increased in such systems. The possible reduction of CO-emissions by combining pellet heating with solar heating has also been investigated. Systems with pellet stoves (both with and without a water jacket), pellet boilers and solar heating have been simulated. Different system concepts have been compared in order to investigate the most promising solutions. Modifications in system design and control strategies have been carried out in order to increase the system efficiency and the solar gains. Possibilities for increasing the solar gains have been limited to investigation of DHW-units for hot water production and the use of hot water for heating of dishwashers and washing machines via a heat exchanger instead of electricity (heat-fed appliances). Computer models of pellet stoves, boilers, DHW-units and heat-fed appliances have been developed and the parameters for the models have been identified from measurements on real components. The conformity between the models and the measurements has been checked. The systems with wood pellet stoves have been simulated in three different multi-zone buildings, simulated in detail with heat distribution through door openings between the zones. For the other simulations, either a single-zone house model or a load file has been used. Simulations were carried out for Stockholm, Sweden, but for the simulations with heat-fed machines also for Miami, USA. The foremost result of this thesis is the increased understanding of the dynamic operation of combined pellet and solar heating systems for single-family houses. The results show that electricity savings and annual system efficiency is strongly affected by the system design and the control strategy. Large reductions in pellet consumption are possible by combining pellet boilers with solar heating (a reduction larger than the solar gains if the system is properly designed). In addition, large reductions in carbon monoxide emissions are possible. To achieve these reductions it is required that the hot water production and the connection of the radiator circuit is moved to a well insulated, solar heated buffer store so that the boiler can be turned off during the periods when the solar collectors cover the heating demand. The amount of electricity replaced using systems with pellet stoves is very dependant on the house plan, the system design, if internal doors are open or closed and the comfort requirements. Proper system design and control strategies are crucial to obtain high electricity savings and high comfort with pellet stove systems. The investigated technologies for increasing the solar gains (DHW-units and heat-fed appliances) significantly increase the solar gains, but for the heat-fed appliances the market introduction is difficult due to the limited financial savings and the need for a new heat distribution system. The applications closest to market introduction could be for communal laundries and for use in sunny climates where the dominating part of the heat can be covered by solar heating. The DHW-unit is economical but competes with the internal finned-tube heat exchanger which is the totally dominating technology for hot water preparation in solar combisystems for single-family houses.

Agent-Based Hybrid Intelligent Systems: An Agent-Based Framework for Complex Problem Solving

Pt. I. Fundamentals of hybrid intelligent systems and agents -- 1. Introduction -- 2. Basics of hybrid intelligent systems -- 3. Basics of agents and multi-agent systems -- Pt. II. Methodology and framework -- 4. Agent-oriented methodologies -- 5. Agent-based framework for hybrid intelligent systems --6. Matchmaking in middle agents -- Pt. III. Application systems -- 7. Agent-based hybrid intelligent system for financial investment
planning -- 8. Agent-based hybrid intelligent system for data mining -- Pt. IV. Concluding remarks -- 9. The less the more -- App. Sample source codes of the agent-based financial planning system

Managing complexity and insitutionalization : power and politics in ERP implementation in an Australian university

This chapter reports a case study of ERP implementation in an institution of higher education. The ERP is one based on integration of administrative tasks based on Oracle® systems and is successful both in terms of its embeddedness in institutionalized practice and in supporting that university's operations. The key issue that emerged from the study showed that understanding complexity, institutionalized practice, and the power relations in existence enable the implementation to be more effective, as it can be managed when understood. The chapter argues that organizations reproduce practice and that an ERP challenges that. To deal with that challenge, social dramas emerge wherever power exists, and the resulting conflicts challenge the effectiveness of the systems put in place. In this case study, the key role of the project champion in resolving the social dramas became evident.

Introduction: perspectives on work-life balance

Work-life balance has emerged as a major concern for researchers trying to map the dimensions and causes of the issue, for policy makers searching for uncontroversial solutions to the problem and for individuals trying to construct satisfying and productive lives. There is some agreement over the main contributors to the work-life balance 'problem': the increase in female participation in the workforce since the 1960s; changes to work from the mid-1970s, in particular greater work intensification, an increase in alternative work schedules away from the standard working week and the growth of casual jobs (particularly in Australia); and a de-differentiation of roles, which has contributed to greater spill-over between work and other roles.

These factors are embedded in economic, social and cultural changes that characterise the post-World War II development of late capitalism in the more developed economies. Each is itself the result of a set of complex processes of change. We do not attempt here to detail these changes in all their complexity but draw out those elements that are most important in attempting to understand the work-life issue in terms of causal forces, mediating support systems and the effects of work-life balance or 'imbalance' on individuals, households, communities and societies.

This issue of Labour and Industry brings together three papers that focus on different work-life balance issues as a result of differing causal forces, different configurations of work/life activities, varying outcomes and variations in terms of support available. In particular, the problem of work-life balance is examined through an analysis of change in attitudes to mothers working in Australia, a study of agency or labour hire, and a study of young professionals. These papers were first presented at the WorkTimes/LifeTimes Colloquium held in Geelong, Victoria in December 2004. The aim of this colloquium was to explore issues around working time and the impact that this has on other aspects of people's lives. Specialists in the area of working time, time use, employee relations, and work-family came together to share the results of their respective research areas and to debate the theoretical and policy implications of their findings.

Security management: an information systems setting

Information Systems have been used for many years to analyze problems and compare options in a managed environment. The introduction of computer and information security systems into such an environment is a typical example of a situation to which an Information Systems approach can be applied. In this paper, we examine the issues peculiar to implementation of security in a healthcare environment, looking specifically at one such specially designed system, SIM-ETHICS, which takes a participational approach.

The welfare economics of measuring sustainability: a new approach based on social choice theory and systems analysis

This paper presents a new measure of sustainability within a welfare economics framework. Gross domestic product (GDP) can be used as an indicator of sustainability if the GDP estimates are undertaken within a cost-benefit analysis framework based on social choice perspectives. Sustainability is dependent on a healthy and functioning socio-economic and environmental (SEE) system. Economic development can damage the SEE system through resource degradation, over-harvesting and pollution. This paper addresses the tensions between economic development and sustainability by undertaking a number of SEE-based adjustments to GDP based on social choice perspectives in order to measure sustainability. These adjustments include the environmental and social costs caused by economic development such as water pollution, the depletion of non-renewable resources, and deforestation. Thailand is used as a case study for a 25 year period (1975-1999). The results show a divergence in terms of GDP per capita and the SEE-adjusted GDP per capita figure. The paper concludes that, with increasing environmental and social costs of economic development, pursuing such extreme high growth objectives without due environmental and social considerations can threaten present social welfare and future sustainability. Copyright © 2005 John Wiley & Sons, Ltd and ERP Environment.

Introduction to special issue on indigenous entrepreneurs

Purpose: The purpose of this paper is to introduce the content of a special issue of Journal of Enterprising Communities focusing on indigenous entrepreneurs.

Design/methodology/approach: The paper provides a brief description of the six contributions to the special issue.

Findings: The papers are found to range over New Zealand, Australia, Hawaii, Sweden Samoa and Ghana.

Originality/value: The papers comprising this special issue are of value in increasing understanding of how uniquely indigenous political, economic and social systems can explain cultural, social and political factors that both inhibit and enhance indigenous economic prosperity.

Occupational health and safety management systems : system types and effectiveness

The aim of this thesis is to develop a framework to evaluate the relative performance of different types of health and safety management system. This objective is an analytical one, but it stems from a policy issue of public importance. Over the past decade Australia, like other countries, has seen the emergence and growth of interest in developing health and safety management systems. But are they all the same, and if not, do they differ in their effectiveness? The thesis does not seek to give a definitive answer to these questions. Given the novelty of the phenomenon and the lack of research on this subject, the research is exploratory. An hypothesis about the effectiveness of different health and safety management systems is developed rather than tested. The thesis proceeds by first defining health and safety management systems as a combination of the planning and review, the management arrangements, the consultative arrangements and the specific program elements that work together in an integrated way to improve health and safety performance. A research procedure is described involving twenty exploratory case studies. The thesis then - develops - from the literature and the case study research - an analytical framework to evaluate the performance of different health and safety management systems. That framework has two parts. First is a typology of health and safety management systems. This is constructed from two distinctions - between 'safe place' and 'safe person' approaches to health and safety; and between 'innovative' and traditional' management methods and structures. These distinctions yield four types of system. The typology was applied to the case studies which yielded a reasonable fit in most instances. The second part of the framework is a 'process evaluation' technique akin to Quality standards. Derived from the Victorian SafetyMAP audit criteria, the "e;process evaluation tool "e; is preferred to traditional outcome measures such as incident or claim rates. Using this measure, the twenty case study enterprises were classified as above average, average or below average in performance. These results correlated poorly with traditional incident trend and benchmark measures. The two elements of the framework are then combined to explore the relationship between the different types of system and their performance. Evidence from the twenty case studies showed a tendency for innovative/safe place firms to perform better than traditional/safe person firms. This finding can form the basis for a hypothesis that may be subject to statistical testing on a generalisable sample. In addition five 'best practice' cases were selected and subjected to a cross case analysis to search for common characteristics that might explain their performance. This analysis suggests the importance of a number of factors: senior managers who drive health and safety change and mobilise all possible resources in the pursuit of change; health and safety representatives who work with managers in a 'joint regulatory relationship' across system activities; the involvement of employees more generally, but not as a substitute for action by managers and health and safety representatives; a comprehensive approach to elimination of all hazards; and the introduction of innovative programs to continually improve systems and facilitate employee involvement in health and safety.

Towards prefabricated sustainable housing - an introduction

Prefabricated building systems are once again gaining popularity. The new prefabricated paradigm offers the integration of several approaches previously ignored: automated manufacturing, integrated building services and environmental sustainable principles. Consistency, predictable environmental control, modular flexibility, quick assembly and affordability are promising features of modern manufactured construction. Though the concept of prefabricated building is not new, this type of construction may be the only hope in obtaining a truely sustainable architecture for our future.

This paper attempts to define and evaluate several prefabricated building systems, ranging from a ‘kit-of-parts’ to fully assembled ‘volumetric’ modules. It aims to categorise various manufactured types among a vast amount of information, and to observe their attributes regarding materials, flexibility, structural integrity, delivery and constructability. This paper suggests that pre-fabricated architecture can deliver high order design and diversity within the framework of waste reduction, renewable systems integration and optimal performance.

Solar lanterns or solar home lighting systems – community preferences in East Timor

Access to electrification in rural areas of East Timor is extremely limited with as few as 5% of rural households connected to electricity. The government of East Timor intends to increase rural access to electricity significantly in the coming decade. The introduction of small PV systems is envisaged for many households in the most remote areas. Several agencies have piloted the introduction of small solar home systems (SHS) and solar lanterns. In the Railaco sub-district of East Timor, some 1000 households have experience of using either SHS and/or solar lanterns and are in a unique position to indicate a preference regarding these forms of PV lighting technology. This paper reports on a survey of 76 households in Railaco investigating experience with PV lighting systems. Results of the survey indicate a strong preference by users for SHS rather than lanterns. The preference for SHS arose from a range of factors including: a perception of better light quality; ability to illuminate the whole house; reduced risk of damage to the PV equipment; and longer duration of nightly operation. The research indicates that where a single PV lighting system is provided, users are likely to prefer SHS to solar lanterns.

Potential applications of discrete-event simulation and fuzzy rule-based systems to structural reliability and availability

This chapter discusses and illustrates some potential applications of discrete-event simulation (DES) techniques in structural reliability and availability analysis, emphasizing the convenience of using probabilistic approaches in modern building and civil engineering practices. After reviewing existing literature on the topic, some advantages of probabilistic techniques over analytical ones are highlighted. Then, we introduce a general framework for performing structural reliability and availability analysis through DES. Our methodology proposes the use of statistical distributions and techniques – such as survival analysis – to model component-level reliability. Then, using failure- and repair-time distributions and information about the structural logical topology (which allows determination of the structural state from their components’ state), structural reliability, and availability information can be inferred. Two numerical examples illustrate some potential applications of the proposed methodology to achieving more reliable and structural designs. Finally, an alternative approach to model uncertainty at component level is also introduced as ongoing work. This new approach is based on the use of fuzzy rule-based systems and it allows the introduction of experts’ opinions and evaluations in our methodology.

Nutrition promotion : theories and methods, systems and settings

An introduction to approaches and techniques used to influence food behaviours and improve nutrition and health.