Mental Health Effects of Equine Therapy with Children

This study examined the effects of eight weekly lessons of therapeutic horseback riding (THR) on five children between the ages of 6 and 12 years who displayed behavioral issues, mood disturbance, relationship issues, or other mental health disorders. All of the children's parents/caregivers completed the Child Behavior Checklist for Ages 6-18 at the onset of the lessons and at the conclusion of the lessons. The children did not show any significant improvement on the Internalizing, Externalizing, Total Problems scales or the syndrome scales. However, comparisons between the pre-test and post-test scores on the Behavior scale and the Externalizing scale showed positive trends which warrant further study. The lack of significance in the data suggests that a greater participant population or a mixed method study using a combination of quantitative and qualitative strategies may yield more conclusive results.

Mechanical annealing of metallic electrodes at the atomic scale

The process of creating an atomically defined and robust metallic tip is described and quantified using measurements of contact conductance between gold electrodes and numerical simulations. Our experiments show how the same conductance behavior can be obtained for hundreds of cycles of formation and rupture of the nanocontact by limiting the indentation depth between the two electrodes up to a conductance value of approximately 5G0 in the case of gold. This phenomenon is rationalized using molecular dynamics simulations together with density functional theory transport calculations which show how, after repeated indentations (mechanical annealing), the two metallic electrodes are shaped into tips of reproducible structure. These results provide a crucial insight into fundamental aspects relevant to nanotribology or scanning probe microscopies.

Behavior of different soot combustion catalysts under NOx/O2. Importance of the catalyst–soot contact

Four different catalysts (Pt/Al2O3, Ce0.8Zr0.2O2, PrO2−x and SrTiCuO3) have been investigated on a laboratory scale to evaluate their potential as diesel soot combustion catalysts under different experimental conditions, which simulate the situation found in a continuous regeneration technology trap (dual-bed configuration of catalyst and soot) or a catalyst-coated filter system (single-bed configuration, both catalyst and soot particles mixed under loose-contact mode). Under dual-bed configuration, the behavior of the catalysts towards soot combustion are very similar, despite the differences observed in the NO2 production profiles. However, under single-bed configuration, there are important differences in the soot combustion activities and in the NO2 slip profiles. The configurations chosen have an enormous impact on CO/(CO + CO2) ratios of combustion products as well. The most active catalyst under NOx + O2 is PrO2−x combining a high contribution of active oxygen-assisted soot combustion as well as high NO2 production activity along the catalytic bed.

Preliminary interpretation of shaking-table response of a full-scale 3-storey building composed of thin reinforced concrete sandwich walls

In the last few decades, the use of cast in situ reinforced concrete sandwich panels for the construction of low- to mid-rise buildings has become more and more widespread due to several interesting properties of this construction technique, such as fast construction and high thermal and acoustic performances. Nonetheless the level of knowledge of the structural behavior of systems made of squat reinforced concrete sandwich panels is still not so consolidated, especially with reference to the seismic response, due to the lack of experimental studies. In recent years, while various experimental tests have been conducted on single panels aimed at assessing their seismic capacity, only few tests have been carried out on more complex structural systems. In this paper, the experimental results of a series of shaking-table tests performed on a full-scale 3-storey building are presented in detail. The main goal is to give to the scientific community the possibility of develop independent interpretation of these experimental results. An in-depth interpretation of the discrepancies between the analytical predictions and the experimental results is beyond the objective of this paper and is still under development. Nonetheless, preliminary interpretations indicate that both the stiffness and the strength of the building under dynamic excitation appear quite superior with respect to those expected from the results of previous pseudo-static cyclic tests conducted on simple specimens.

How can an invasive grass affect fire behavior in a tropical savanna? A community and individual plant level approach

Some invasive grasses have been reported to change fire behavior in invaded plant communities. Urochloa brizantha is an aggressive invasive grass in the Brazilian Cerrado, an ecosystem where fire is a common disturbance. We investigated the effects of U. brizantha on fire behavior in an open Cerrado physiognomy in Central Brazil. Using experimental burnings we compared fire behavior at both the community and the individual plant level in invaded (UJ) and non-invaded (NJ) areas burned in July. We also assessed the effect of fire season in invaded areas by comparing July (UJ) and October (UO) burnings. We evaluated the following variables: fuel load, fuel moisture, combustion efficiency, maximum fire temperature, flame height, and fire intensity. Additionally, we evaluated the temperatures reached under invasive and native grass tussocks in both seasons. Fuel load, combustion efficiency, and fire intensity were higher in NJ than in UJ, whilst flame height showed the opposite trend. Fuel amount and fire intensity were higher in October than in July. At the individual plant level, U. brizantha moisture was higher than that of native species, however, temperatures reaching ≥600 °C at ground level were more frequent under U. brizantha tussocks than under native grasses. At the community level, the invasive grass modified fire behavior towards lower intensity, lower burning efficiency, and higher flame height. These results provide essential information for the planning of prescribed burnings in invaded Cerrado areas.

Validation of the Spanish version of mackey childbirth satisfaction rating scale

Background: The “Mackey Childbirth Satisfaction Rating Scale” (MCSRS) is a complete non-validated scale which includes the most important factors associated with maternal satisfaction. Our primary purpose was to describe the internal structure of the scale and validate the reliability and validity of concept of its Spanish version MCSRS-E. Methods: The MCSRS was translated into Spanish, back-translated and adapted to the Spanish population. It was then administered following a pilot test with women who met the study participant requirements. The scale structure was obtained by performing an exploratory factorial analysis using a sample of 304 women. The structures obtained were tested by conducting a confirmatory factorial analysis using a sample of 159 women. To test the validity of concept, the structure factors were correlated with expectations prior to childbirth experiences. McDonald’s omegas were calculated for each model to establish the reliability of each factor. The study was carried out at four University Hospitals; Alicante, Elche, Torrevieja and Vinalopo Salud of Elche. The inclusion criteria were women aged 18–45 years old who had just delivered a singleton live baby at 38–42 weeks through vaginal delivery. Women who had difficulty speaking and understanding Spanish were excluded. Results: The process generated 5 different possible internal structures in a nested model more consistent with the theory than other internal structures of the MCSRS applied hitherto. All of them had good levels of validation and reliability. Conclusions: This nested model to explain internal structure of MCSRS-E can accommodate different clinical practice scenarios better than the other structures applied to date, and it is a flexible tool which can be used to identify the aspects that should be changed to improve maternal satisfaction and hence maternal health.

Terrain Controls and Landscape-Scale Susceptibility Modelling of Active-Layer Detachments, Sabine Peninsula, Melville Island, Nunavut

Modelling the susceptibility of permafrost slopes to disturbance can identify areas at risk to future disturbance and result in safer infrastructure and resource development in the Arctic. In this study, we use terrain attributes derived from a digital elevation model, an inventory of permafrost slope disturbances known as active-layer detachments (ALDs) and generalised additive modelling to produce a map of permafrost slope disturbance susceptibility for an area on northern Melville Island, in the Canadian High Arctic. By examining terrain variables and their relative importance, we identified factors important for initiating slope disturbance. The model was calibrated and validated using 70 and 30 per cent of a data-set of 760 mapped ALDs, including disturbed and randomised undisturbed samples. The generalised additive model calibrated and validated very well, with areas under the receiver operating characteristic curve of 0.89 and 0.81, respectively, demonstrating its effectiveness at predicting disturbed and undisturbed samples. ALDs were most likely to occur below the marine limit on slope angles between 3 and 10° and in areas with low values of potential incoming solar radiation (north-facing slopes).

JAABA: interactive machine learning for automatic annotation of animal behavior

We present a machine learning-based system for automatically computing interpretable, quantitative measures of animal behavior. Through our interactive system, users encode their intuition about behavior by annotating a small set of video frames. These manual labels are converted into classifiers that can automatically annotate behaviors in screen-scale data sets. Our general-purpose system can create a variety of accurate individual and social behavior classifiers for different organisms, including mice and adult and larval Drosophila.

Use of Extended Characteristics of Locomotion and Feeding Behavior for Automated Identification of Lame Dairy Cows.

This study was carried out to detect differences in locomotion and feeding behavior in lame (group L; n = 41; gait score ≥ 2.5) and non-lame (group C; n = 12; gait score ≤ 2) multiparous Holstein cows in a cross-sectional study design. A model for automatic lameness detection was created, using data from accelerometers attached to the hind limbs and noseband sensors attached to the head. Each cow's gait was videotaped and scored on a 5-point scale before and after a period of 3 consecutive days of behavioral data recording. The mean value of 3 independent experienced observers was taken as a definite gait score and considered to be the gold standard. For statistical analysis, data from the noseband sensor and one of two accelerometers per cow (randomly selected) of 2 out of 3 randomly selected days was used. For comparison between group L and group C, the T-test, the Aspin-Welch Test and the Wilcoxon Test were used. The sensitivity and specificity for lameness detection was determined with logistic regression and ROC-analysis. Group L compared to group C had significantly lower eating and ruminating time, fewer eating chews, ruminating chews and ruminating boluses, longer lying time and lying bout duration, lower standing time, fewer standing and walking bouts, fewer, slower and shorter strides and a lower walking speed. The model considering the number of standing bouts and walking speed was the best predictor of cows being lame with a sensitivity of 90.2% and specificity of 91.7%. Sensitivity and specificity of the lameness detection model were considered to be very high, even without the use of halter data. It was concluded that under the conditions of the study farm, accelerometer data were suitable for accurately distinguishing between lame and non-lame dairy cows, even in cases of slight lameness with a gait score of 2.5.

Core correlation data and revised composite depth scale of Exp302 (ACEX) cores

Expedition 302 of the Integrated Ocean Drilling Program (IODP), also known as the Arctic Coring Expedition (ACEX), successfully penetrated a sequence of Cenozoic sediments draping the crest of the Lomonosov Ridge in the central Arctic Ocean. The cumulative sedimentary record spans the last 57 m.y. and was recovered from three sites located within 15 km of each other. Merging the recovered cores onto a common depth scale that accurately reflects their stratigraphic placement below the seafloor is a fundamental step toward interpreting this unique sedimentary record. However, the lack of overlapping recovery in adjacent holes and intervals of high core disturbance complicated traditional methods of stratigraphic correlation. Here we present a revised composite depth scale for the ACEX sediments, generated in part by performing a regional stratigraphic correlation with sediments recovered from previous expeditions to the Lomonosov Ridge. The revised depth scale also reassesses the offsets for cores in the upper 55 meters below seafloor, where no overlapping recovery was acquired, and proposes modifications to these depths.

Effects of thallus disturbance on abundance and biomass of soft-bottom species in Kongsfjorden in summer 2013

The effects of biotic disturbances, like seaweed whiplash, on the diversity of benthic communities are well documented for temperate coastal systems, yet missing for Arctic benthos. In Arctic soft-bottom habitats, kelp thalli occur either continuously (e.g. trapped by sediment) or sporadically (by drifting on the sediment) after detachment from rocky shores. To explore whether a kelp thallus can disturb the structure and diversity of a coastal Arctic soft-bottom assemblage, we continuously fixed a single thallus of the kelp Saccharina latissima to or sporadically (i.e. biweekly) moved it on the sediment and compared treatment effects to unmanipulated plots (= controls). On 6 September 2013 (i.e. after 73 days of manipulation), one sediment core was taken from each of the 30 plots (n = 10), from which the number of individuals of each of the 45 encountered animal species were recorded. The continuous presence of an experimentally fixed kelp thallus significantly reduced the number of individuals on average by 27 %. This disturbance effect was even stronger, on average 49 %, where a kelp thallus was biweekly moved on the sediment. Likewise, taxon richness was lowered by an average of 19 and 36 % where a S. latissima thallus was continuously or sporadically present, respectively. While the composition of taxa was also significantly different among all treatment groups, evenness and biomass were unaffected by kelp treatments. We conclude that the presence and already movements of a single kelp thallus can promote small scale patchiness in near-shore soft-bottom assemblage structure and diversity and exemplify a significant connection between rocky and sedimentary coastal habitats.

Mollusca Non-Grata: The influence of top-down control and residence time on the abundance, distribution, and behavior of non-native marine snails in Washington State

Thesis (Ph.D.)--University of Washington, 2016-06

Beluga whale distribution, migration, and behavior in a changing Pacific Arctic

Thesis (Ph.D.)--University of Washington, 2016-06

Cognitive change processes in a group cognitive behavior therapy of depression

The present study attempted to examine the causal relationships among changes in automatic thoughts, dysfunctional attitudes, and depressive symptoms in a 12-week group cognitive behavior therapy (GCBT) program for depression. In all, 35 depressed patients attending the GCBT program were monitored with the Automatic Thoughts Questionnaire, Dysfunctional Attitudes Scale, and Beck Depression Inventory at the pre-treatment, 4th and 8th sessions, and post-treatment. The results were as follows: (1) GCBT reduces negative cognitions; (2) changes in automatic thoughts and dysfunctional attitudes lead to change in depressive symptoms; and (3) automatic thoughts play a mediating role between dysfunctional attitudes and depression. The findings taken as a whole support the Causal Cognition Model of depression. (C) 2003 Elsevier Science Ltd. All rights reserved.

Layered silicate nanocomposites based on various high-functionality epoxy resins. Part II: The influence of an organoclay on the rheological behavior of epoxy prepolymers

The effect of an organically surface modified layered silicate on the viscosity of various epoxy resins of different structures and different functionalities was investigated. Steady and dynamic shear viscosities of the epoxy resins containing 0-10 wt% of the organoclay were determined using parallel plate rheology. Viscosity results were compared with those achieved through addition of a commonly used micron-sized CaCO3 filler. It was found that changes in viscosities due to the different fillers were of the same order, since the layered silicate was only dispersed on a micron-sized scale in the monomer (prior to reaction), as indicated by X-ray diffraction measurements. Flow activation energies at a low frequency were determined and did not show any significant changes due to the addition of organoclay or CaCO3. Comparison between dynamic and steady shear experiments showed good agreement for low layered silicate concentrations below 7.5 wt%, i.e. the Cox-Merz rule can be applied. Deviations from the Cox-Merz rule appeared at and above 10 wt%, although such deviations were only slightly above experimental error. Most resin organoclay blends were well predicted by the Power Law model, only concentrations of 10 wt% and above requiring the Herschel-Buckley (yield stress) model to achieve better fits. Wide-angle X-ray measurements have shown that the epoxy resin swells the layered silicate with an increase in the interlayer distance of approximately 15 Angstrom, and that the rheology behavior is due to the lateral, micron-size of these swollen tactoids.