New synthetic strategies towards indolizines and pyrroles

Indolizines and pyrroles are considered as “privileged” structures since their skeletons were found in many biologically active natural products and they possess a wide range of pharmaceutical properties. Syntheses of these small drug-like molecules are very important in medicinal chemistry. However, most existent methodologies are usually limited to specific substitution patterns or require impractical starting materials or expensive catalysts. Therefore, developing new methodologies for the synthesis of indolizines and pyrroles from commercially available or readily accessible sources is highly desirable.rnIn this PhD thesis, several methods has been described for the synthesis of indolizines and pyrroles. In the first part, indolizines carrying substituents in positions 1-3 were synthesized via a formal [3+2]-cycloaddition of pyridinium ylides and nitroalkenes. Pyridinium salts were prepared by N-alkylation of pyridines with cyanohydrin triflates which could be prepared from corresponding aldehydes via a Strecker reaction followed by O-triflylation. Nitroalkenes were simply prepared from the corresponding aldehydes and nitroalkanes in a nitroaldol condensation. Overall, this modular approach allows to construct the indolizine framework with various substitution patterns starting from a pyridine, two different aldehydes and a nitroalkane. In contrast to reported methods, the produced indolizines do not have to contain an electron-withdrawing group.rnIt has also been found that nitrile-stabilized 2-alkylpyridinium ylides cyclize to unstable 2-aminoindolizines via an intramolecular 5-exo-dig cyclization. Using an in situ acetylation of the amino group, N-protected 2-aminoindolizines could be synthesized. As a less common substitution pattern, indolizines carrying substituents in positions 5–8 were synthesized from enones and 2-(1H-pyrrol-1-yl)nitriles obtained from α-aminonitriles using a modified Paal-Knorr pyrrole synthesis. The decoration of the pyridine unit in the indolizine skeleton has been achieved by a one-pot conjugate addition/cycloaromatization sequence.rnIn the second part of the thesis, the diversity-oriented synthesis of pyrroles from 3,5-diaryl substituted 2H-pyrrole-2-carbonitriles (cyanopyrrolines) obtained in a cyclocondensation of enones with aminoacetonitrile hydrochloride is being discussed. 2,4-Di-, 2,3,5-trisubstituted pyrroles, pyrrole-2-carbonitriles and 2,2’-bipyrroles were synthesized in a one- or two-step protocol. While the microwave-assisted thermal elimination of HCN from cyanopyrrolines gave 2,4-disubstituted pyrroles, DDQ-oxidation of the same intermediates furnished pyrrole-2-carbonitriles. Furthermore, 2,3,5-trisubstituted pyrroles were obtained via a C-2-alkylation of the deprotonated cyanopyrrolines followed by the elimination of HCN. Finally, it has also been found that tetraaryl substituted 2,2’-bipyrroles could be synthesized by the oxidative dimerization of cyanopyrrolines using copper (II) acetate at 100 °C.rn

Arnt van Tricht : Werkkatalog eines Bildhauers am Niederrhein im 16. Jahrhundert

Arnt van Tricht, gest. 1570, unterhielt bis in die späten 50er Jahre des 16. Jahrhunderts, wahrschein-lich aus Antwerpen kommend, in Kalkar am Niederrhein eine sehr erfolgreiche Werkstatt. Die bis dahin vorherrschende spätgotische Formensprache der langjährig ansässigen Bildhauer löste er durch die der Renaissance ab, führte jedoch deren Arbeitsfelder und Materialwahl weiter. Arnt van Tricht schuf Arbeiten sowohl religiöser als auch profaner Natur innerhalb des Gebiets der damals sehr bedeutenden Vereinigten Herzogtümer Kleve-Mark-Jülich-Berg und Geldern. Seine wohlhabenden Auftraggeber entstammten dem Klerus, der Bürgerschaft und dem Adel.rnIm Rahmen der Arbeit zeigte sich, dass sich für den Künstler die Verlegung der herzoglichen Residenz nach Düsseldorf und der wirtschaftliche Niedergang der Region letztlich stärker auswirkte als die religiösen Veränderungen durch die Reformation.rnArnt van Tricht schuf die meisten seiner religiösen Bildwerke für die Stiftskirche St. Viktor in Xanten, die durch die Bürgerschaft ausgestattete Pfarrkirche von St. Nicolai in Kalkar und umliegende Gemeinden. Einzelne Stücke sind, wohl über familiäre Verflechtungen vermittelt, in einem weiteren Radius zu finden. Van Tricht arbeitete Schnitzretabel mitsamt ihrer ornamentalen und figuralen Aus-stattung sowie Skulpturen(-gruppen) in Eichenholz. Daneben finden sich im Werk zahlreiche in Sandstein gearbeitete Skulpturen, die teilweise an Pfeilern und Portalen der Kirchen architektur-gebunden sind. Neben diesen rundplastischen Werken schuf Arnt van Tricht eine große Anzahl an steinernen Reliefarbeiten. Hierbei nehmen die überwiegend für die lokalen Kanoniker gearbeiteten Epitaphien mit biblischem Reliefbild in Ornamentrahmen den größten Teil ein.rnEin zweiter, gleichwertiger Werkkomplex, überwiegend in Sandstein gearbeitet, ist profaner Natur und fällt durch die Größe der Aufträge ins Gewicht. Arnt van Tricht war an einigen groß angelegten Modernisierungsprojekten an Stadthäusern und Kastellen des lokalen Adels beschäftigt. Für mehrere aufwendig gestaltete Fassadendekorationen arbeitete er Architekturglieder mit figürlicher Darstellung oder Ornament, Büsten und freiplastische Skulpturen. Arnt van Tricht war aber auch an der Aus-gestaltung der Innenräume beteiligt. Aufwendig skulptierte und reliefverzierte Kaminverkleidungen stehen dabei neben reduzierteren Arbeiten für offensichtlich weniger repräsentative Räume. Neben in Eichenholz gearbeiteter Vertäfelung schuf Arnt van Tricht hölzerne figurale Handtuchhalter. Diese zeigen, wie auch die Reliefbilder der Kamine, die darüber hinaus Wappen und Porträts der Bauherren aufnehmen, eine religiöse oder profane, auch antikisierende Thematik, bei der ein moralisierender Unterton mitschwingt.rnIn dieser Arbeit werden erstmals alle Werkstücke des Künstlers zusammengeführt dargestellt, so dass ein Werkkatalog mit einem Überblick über das sehr breit gefächerte Spektrum des Opus Arnt van Trichts vorliegt. Häufig durch bloße Nennung mit Arnt van Tricht in Verbindung gebrachte Arbeiten werden bewertet und die Zu- oder Abschreibung begründet. Auch können einige Stücke neu zugeschrieben werden.

Oxidative damage to DNA related to survivorship and carotenoid-based sexual ornamentation in the common yellowthroat

Carotenoid-based sexual ornaments are hypothesized to be reliable signals of male quality, based on an allocation trade-off between the use of carotenoids as pigments and their use in antioxidant defence against reactive oxygen species. Carotenoids appear to be poor antioxidants in vivo, however, and it is not clear whether variation in ornament expression is correlated with measures of oxidative stress (OXS) under natural conditions. We used single-cell gel electrophoresis to assay oxidative damage to erythrocyte DNA in the common yellowthroat (Geothlypis trichas), a sexually dichromatic warbler in which sexual selection favours components of the males’ yellow ‘bib’. We found that the level of DNA damage sustained by males predicted their overwinter survivorship and was reflected in the quality of their plumage. Males with brighter yellow bibs showed lower levels of DNA damage, both during the year the plumage was sampled (such that yellow brightness signalled current OXS) and during the previous year (such that yellow brightness signalled past OXS). We suggest that carotenoid-based ornaments can convey information about OXS to prospective mates and that further work exploring the proximate mechanism(s) linking OXS to coloration is warranted.

Functional ZnO nanostructures for electronic and energy applications

ZnO has proven to be a multifunctional material with important nanotechnological applications. ZnO nanostructures can be grown in various forms such as nanowires, nanorods, nanobelts, nanocombs etc. In this work, ZnO nanostructures are grown in a double quartz tube configuration thermal Chemical Vapor Deposition (CVD) system. We focus on functionalized ZnO Nanostructures by controlling their structures and tuning their properties for various applications. The following topics have been investigated: 1. We have fabricated various ZnO nanostructures using a thermal CVD technique. The growth parameters were optimized and studied for different nanostructures. 2. We have studied the application of ZnO nanowires (ZnONWs) for field effect transistors (FETs). Unintentional n-type conductivity was observed in our FETs based on as-grown ZnO NWs. We have then shown for the first time that controlled incorporation of hydrogen into ZnO NWs can introduce p-type characters to the nanowires. We further found that the n-type behaviors remained, leading to the ambipolar behaviors of hydrogen incorporated ZnO NWs. Importantly, the detected p- and n- type behaviors are stable for longer than two years when devices were kept in ambient conditions. All these can be explained by an ab initio model of Zn vacancy-Hydrogen complexes, which can serve as the donor, acceptors, or green photoluminescence quencher, depend on the number of hydrogen atoms involved. 3. Next ZnONWs were tested for electron field emission. We focus on reducing the threshold field (Eth) of field emission from non-aligned ZnO NWs. As encouraged by our results on enhancing the conductivity of ZnO NWs by hydrogen annealing described in Chapter 3, we have studied the effect of hydrogen annealing for improving field emission behavior of our ZnO NWs. We found that optimally annealed ZnO NWs offered much lower threshold electric field and improved emission stability. We also studied field emission from ZnO NWs at moderate vacuum levels. We found that there exists a minimum Eth as we scale the threshold field with pressure. This behavior is explained by referring to Paschen’s law. 4. We have studied the application of ZnO nanostructures for solar energy harvesting. First, as-grown and (CdSe) ZnS QDs decorated ZnO NBs and ZnONWs were tested for photocurrent generation. All these nanostructures offered fast response time to solar radiation. The decoration of QDs decreases the stable current level produced by ZnONWs but increases that generated by NBs. It is possible that NBs offer more stable surfaces for the attachment of QDs. In addition, our results suggests that performance degradation of solar cells made by growing ZnO NWs on ITO is due to the increase in resistance of ITO after the high temperature growth process. Hydrogen annealing also improve the efficiency of the solar cells by decreasing the resistance of ITO. Due to the issues on ITO, we use Ni foil as the growth substrates. Performance of solar cells made by growing ZnO NWs on Ni foils degraded after Hydrogen annealing at both low (300 °C) and high (600 °C) temperatures since annealing passivates native defects in ZnONWs and thus reduce the absorption of visible spectra from our solar simulator. Decoration of QDs improves the efficiency of such solar cells by increasing absorption of light in the visible region. Using a better electrolyte than phosphate buffer solution (PBS) such as KI also improves the solar cell efficiency. 5. Finally, we have attempted p-type doping of ZnO NWs using various growth precursors including phosphorus pentoxide, sodium fluoride, and zinc fluoride. We have also attempted to create p-type carriers via introducing interstitial fluorine by annealing ZnO nanostructures in diluted fluorine gas. In brief, we are unable to reproduce the growth of reported p-type ZnO nanostructures. However; we have identified the window of temperature and duration of post-growth annealing of ZnO NWs in dilute fluorine gas which leads to suppression of native defects. This is the first experimental effort on post-growth annealing of ZnO NWs in dilute fluorine gas although this has been suggested by a recent theory for creating p-type semiconductors. In our experiments the defect band peak due to native defects is found to decrease by annealing at 300 °C for 10 – 30 minutes. One of the major future works will be to determine the type of charge carriers in our annealed ZnONWs.

Boron nitride nanotubes : synthesis, characterization, functionalization, and potential applications

Boron nitride nanotubes (BNNTs) are structurally similar to carbon nanotubes (CNTs), but exhibit completely different physical and chemical properties. Thus, BNNTs with various interesting properties may be complementary to CNTs and provide an alternative perspective to be useful in different applications. However, synthesis of high quality of BNNTs is still challenging. Hence, the major goals of this research work focus on the fundamental study of synthesis, characterizations, functionalization, and explorations of potential applications. In this work, we have established a new growth vapor trapping (GVT) approach to produce high quality and quantity BNNTs on a Si substrate, by using a conventional tube furnace. This chemical vapor deposition (CVD) approach was conducted at a growth temperature of 1200 °C. As compared to other known approaches, our GVT technique is much simpler in experimental setup and requires relatively lower growth temperatures. The as-grown BNNTs are fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron energy loss spectroscopy (EELS), Energy Filtered Mapping, Raman spectroscopy, Fourier Transform Infra Red spectroscopy (FTIR), UV-Visible (UV-vis) absorption spectroscopy, etc. Following this success, the growth of BNNTs is now as convenient as growing CNTs and ZnO nanowires. Some important parameters have been identified to produce high-quality BNNTs on Si substrates. Furthermore, we have identified a series of effective catalysts for patterned growth of BNNTs at desirable or pre-defined locations. This catalytic CVD technique is achieved based on our finding that MgO, Ni or Fe are the good catalysts for the growth of BNNTs. The success of patterned growth not only explains the role of catalysts in the formation of BNNTs, this technique will also become technologically important for future device fabrication of BNNTs. Following our success in controlled growth of BNNTs on substrates, we have discovered the superhydrophobic behavior of these partially vertically aligned BNNTs. Since BNNTs are chemically inert, resistive to oxidation up to ~1000°C, and transparent to UV-visible light, our discovery suggests that BNNTs could be useful as self-cleaning, insulating and protective coatings under rigorous chemical and thermal conditions. We have also established various approaches to functionalize BNNTs with polymeric molecules and carbon coatings. First, we showed that BNNTs can be functionalized by mPEG-DSPE (Polyethylene glycol-1,2-distearoyl-sn-glycero-3-phosphoethanolamine), a bio-compatible polymer that helps disperse and dissolve BNNTs in water solution. Furthermore, well-dispersed BNNTs in water can be cut from its original length of >10µm to(>20hrs). This success is an essential step to implement BNNTs in biomedical applications. On the other hand, we have also succeeded to functionalize BNNTs with various conjugated polymers. This success enables the dispersion of BNNTs in organic solvents instead of water. Our approaches are useful for applications of BNNTs in high-strength composites. In addition, we have also functionalized BNNTs with carbon decoration. This was performed by introducing methane (CH4) gas into the growth process of BNNT. Graphitic carbon coatings can be deposited on the side wall of BNNTs with thicknesses ranging from 2 to 5 nm. This success can modulate the conductivity of pure BNNTs from insulating to weakly electrically conductive. Finally, efforts were devoted to explore the application of the wide bandgap BNNTs in solar-blind deep UV (DUV) photo-detectors. We found that photoelectric current generated by the DUV light was dominated in the microelectrodes of our devices. The contribution of photocurrent from BNNTs is not significant if there is any. Implication from these preliminary experiments and potential future work are discussed.

Thecosomata in late Quternary deposits of ODP Holes 134-830A and 134-831A

We undertook a quantitative study of Thecosomata shells (pelagic gastropods) and their remains in Quaternary foraminiferal oozes deposited on the tilted calcareous platform of the Bougainville Guyot (Hole 831 A), and in the late Quaternary volcanic siltstones, claystones and sandy interbeds on the upper forearc slope of the central New Hebrides Island Arc (Hole 830A). The distribution of the species is based on the identification of adult shells, juvenile stages, protoconchs, and characteristic shell fragments. By studying thecosomatous shells using a scanning electron microscope (SEM), we were able to specify the fine microstructure of the coiled Limacina inflata and compare it with the rod-type crossed-lamellar structure of some other Limacina species, as well as with the helical structure of the Cavoliniidae.

Molecular approaches to smart materials via interface recognition and conformationally switchable cavitands

In this thesis the molecular level design of functional materials and systems is reported. In the first part, tetraphosphonate cavitand (Tiiii) recognition properties towards amino acids are studied both in the solid state, through single crystal X-ray diffraction, and in solution, via NMR and ITC experiments. The complexation ability of these supramolecular receptors is then applied to the detection of biologically remarkable N-methylated amino acids and peptides using complex dynamic emulsions-based sensing platforms. In the second part, a general supramolecular approach for surface decoration with single-molecule magnets (SMMs) is presented. The self-assembly of SMMs is achieved through the formation of a multiple hydrogen bonds architecture (UPy-NaPy complexation). Finally we explore the possibility to impart auxetic behavior to polymeric material through the introduction of conformationally switchable monomers, namely tetraquinoxaline cavitands (QxCav). Their interconversion from a closed vase conformation to an extended kite form is studied first in solution, then in polymeric matrixes via pH and tensile stimuli by UV-Vis spectroscopy.

Study of interaction between Si(O,C) nanowires and the biological system

Nanomedicine is a new branch of medicine, based on the potentiality and intrinsic properties of nanomaterials. Indeed, the nanomaterials ( i.e. the materials with nano and under micron size) can be suitable to different applications in biomedicine. The nanostructures can be used by taking advantage of their properties (for example superparamagnetic nanoparticles) or functionalized to deliver the drug in a specific target, thanks the ability to cross biological barriers. The size and the shape of 1D-nanostructures (nanotubes and nanowires) have an important role on the cell fate: their morphology plays a key role on the interaction between nanostructure and the biological system. For this reason the 1D nanostructure are interesting for their ability to mime the biological system. An implantable material or device must therefore integrate with the surrounding extracellular matrix (ECM), a complex network of proteins with structural and signaling properties. Innovative techniques allow the generation of complex surface patterns that can resemble the structure of the ECM, such as 1D nanostructures. NWs based on cubic silicon carbide (3C-SiC), either bare (3C-SiC NWs) or surrounded by an amorphous shell (3C-SiC/SiO2 core/shell NWs), and silicon oxycarbide nanowires (SiOxCy NWs) can meet the chemical, mechanical and electrical requirements for tissue engineering and have a strong potential to pave the way for the development of a novel generation of implantable nano-devices. Silicon oxycarbide shows promising physical and chemical properties as elastic modulus, bending strength and hardness, chemical durability superior to conventional silicate glasses in aggressive environments and high temperature stability up to 1300 °C. Moreover, it can easily be engineered through functionalization and decoration with macro-molecules and nanoparticles. Silicon carbide has been extensively studied for applications in harsh conditions, as chemical environment, high electric field and high and low temperature, owing to its high hardness, high thermal conductivity, chemical inertness and high electron mobility. Also, its cubic polytype (3C) is highly biocompatible and hemocompatible, and some prototypes of biomedical applications and biomedical devices have been already realized starting from 3C-SiC thin films. Cubic SiC-based NWs can be used as a biomimetic biomaterial, providing a robust and novel biocompatible biological interface . We cultured in vitro A549 human lung adenocarcinoma epithelial cells and L929 murine fibroblast cells over core/shell SiC/SiO2, SiOxCy and bare 3C-SiC nanowire platforms, and analysed the cytotoxicity, by indirect and direct contact tests, the cell adhesion, and the cell proliferation. These studies showed that all the nanowires are biocompatible according to ISO 10993 standards. We evaluated the blood compatibility through the interaction of the nanowires with platelet rich plasma. The adhesion and activation of platelets on the nanowire bundles, assessed via SEM imaging and soluble P-selectin quantification, indicated that a higher platelet activation is induced by the core/shell structures compared to the bare ones. Further, platelet activation is higher with 3C-SiC/SiO2 NWs and SiOxCyNWs, which therefore appear suitable in view of possible tissue regeneration. On the contrary, bare 3C-SiC NWs show a lower platelet activation and are therefore promising in view of implantable bioelectronics devices, as cardiovascular implantable devices. The NWs properties are suitable to allow the design of a novel subretinal Micro Device (MD). This devices is based on Si NWs and PEDOT:PSS, though the well know principle of the hybrid ordered bulk heterojunction (OBHJ). The aim is to develop a device based on a well-established photovoltaic technology and to adapt this know-how to the prosthetic field. The hybrid OBHJ allows to form a radial p–n junction on a nanowire/organic structure. In addition, the nanowires increase the light absorption by means of light scattering effects: a nanowires based p-n junction increases the light absorption up to the 80%, as previously demonstrated, overcoming the Shockley-Queisser limit of 30 % of a bulk p-n junction. Another interesting employment of these NWs is to design of a SiC based epicardial-interacting patch based on teflon that include SiC nanowires. . Such contact patch can bridge the electric conduction across the cardiac infarct as nanowires can ‘sense’ the direction of the wavefront propagation on the survival cardiac tissue and transmit it to the downstream surivived regions without discontinuity. The SiC NWs are tested in terms of toxicology, biocompatibility and conductance among cardiomyocytes and myofibroblasts.

The Minoans and their interpretations of nature in comparison with succeeding cultures

"Some of the finest interpretations ot nature ever to be expressed by an were painted by the Minoan fresco artists of Crete. Discovered only since the turn of the 20th century, the Kinoan Bronze Age civilization was amazingly progressive and notably modern. Apparently, the Minoans gained their high standard of living mainly through economic prosperity and secarity provided by a great navy. Arts, architecture and craft relice uncovered have been numerous, well-preserved and invaluable sources of historical knowledge"

Improving the Photoelectrochemical Response of TiO2 Nanotubes upon Decoration with Quantum-Sized Anatase Nanowires

TiO2 nanotubes (NTs) have been widely used for a number of applications including solar cells, photo(electro)chromic devices, and photocatalysis. Their quasi-one-dimensional morphology has the advantage of a fast electron transport although they have a relatively reduced interfacial area compared with nanoparticulate films. In this study, vertically oriented, smooth TiO2 NT arrays fabricated by anodization are decorated with ultrathin anatase nanowires (NWs). This facile modification, performed by chemical bath deposition, allows to create an advantageous self-organized structure that exhibits remarkable properties. On one hand, the huge increase in the electroactive interfacial area induces an improvement by 1 order of magnitude in the charge accumulation capacity. On the other hand, the modified NT arrays display larger photocurrents for water and oxalic acid oxidation than bare NTs. Their particular morphology enables a fast transfer of photogenerated holes but also efficient mass and electron transport. The importance of a proper band energy alignment for electron transfer from the NWs to the NTs is evidenced by comparing the behavior of these electrodes with that of NTs modified with rutile NWs. The NT-NW self-organized architecture allows for a precise design and control of the interfacial surface area, providing a material with particularly attractive properties for the applications mentioned above.

Los manuscritos ilustrados de la Biblioteca de la Junta

El hallazgo de más de un centenar de manuscritos de origen mudéjar y morisco al tirar una de las paredes de una casa de la población de Almonacid de la Sierra, situada en la provincia de Zaragoza, ha sido uno de los más importantes descubrimientos de manuscritos hispano-árabes, hasta ahora. En este artículo se analizan las ilustraciones de dichos manuscritos, sus funciones y posiciones del texto. Así se quiere mostrar la importancia del ornamento y decoración de manuscritos en la Península durante la dominación árabe, y cómo este concepto se ve reforzado por la continuidad de los moriscos en decorar sus libros; una continuidad que se puede ver estilística y formalmente, desde los andalusíes hasta los últimos moriscos antes de ser expulsados.

Interior decoration of school-houses,

Mode of access: Internet.

The Boston Cooking-School cook book : with additional chapters on the cold pack method of canning, on the drying of fruits and vegetables, and on food values /

Includes household hints; samples of menus; some recipes include wine or liquor as an ingredient. Sample recipes: Stuffed artichokes, Macaroni à la Milanaise, Apricot and wine jelly, Cream sponge cake.

The encyclopaedia of practical cookery : a complete dictionary of all pertaining to the art of cookery and table service : including original modern reciepts for all kinds of dishes for general, occasional, and exceptional use, the making of every description of table confectionery, the home manufacture of wines, liqueurs, and table waters, the laying, decorating, and preparing of banquets, wedding breakfasts, luncheons, teas, celebration and ball suppers, picnics, garden-party refreshments, race and boating baskets, &c. : the care and good management of the cellar, butler's pantry, larder, ice rooms and chests, &c. /

[Division I. A to Cak] -- Division II. Cak to Cro -- Division III. Cro to Gri -- Division IV. Gri to Mus -- Division V. Mus to Pin -- Division VI. Pin to Ser -- Division VII. Sha to Tut -- Division VIII. Twe to Zwe.