892 resultados para Cristianismo-30-600, Período primitivo


Relevância:

30.00% 30.00%

Publicador:

Resumo:

The increasing application of structural composites in the aerospace industry is mainly due to its low specific weight coupled with its excellent mechanical properties when in service. As a result of climatic variations that pass the aircraft is of paramount importance to study the influence of weathering on this type of material when subjected to such changes. The purpose of this work is to evaluate the mechanical behavior of specimens of kevlar fiber /epoxy matrix composites, by dynamic mechanical thermal analysis (DMA) and interlaminar shear strength tests (ILSS), after passing through three environmental conditioning: saline fog, hygrothermal and ultraviolet radiation. From the results, we concluded that the laminate was molded supplied homogeneously, not presenting problems such as porosity, delaminations or cracks inside. After a period of 625 hours of exposure to hygrothermal conditioning, we observed a 1,2% maximum of absorption of moisture. Samples subjected to the conditioning by UV irradiation (600 hours) and salt spray showed a reduction of about 24,30% and 32,30%, respectively, on the shear strength (ILSS). In DMA analysis is not observed significant changes on the glass transition temperature. However, when considering the storage modulus of the samples conditioned by UV radiation (1200 hours), salt spray and hygrothermal conditioning there is an increase of 5,34% , 7,19% and 5,57% respectively

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Seeking to meet the requirements: relatively low cost of materials and wide applicability in the automotive industry. The best option was the steel Dual Phase (DP), because that is lighter, have high formability, meet the cost requirements and applicability, steel Dual Phase (DP) came to meet these requirements with its two-phase microstructure, ferrite and martensite microstructure who claim to respect and mechanical properties. In this context, the aim of this study was to correlate the microstructure revealed in metallography to the mechanical properties observed in hardness and tensile tests. The microstructure is revealed by etching in 2% nital and then captured images of the sample were processed in ImageJ software to aid in determining the volume fraction of the phases present. Therefore, the mechanical properties were evaluated with respect to volume fraction of the steel layers and analyzed DP 600 together with the mechanical properties obtained by Rockwell hardness test and tensile test. With the values of the mechanical properties calculated and tested, it was possible to describe the method of metallography, as the attack phase and counts, so that it can use this relationship tested/calculated property as a qualitative analytical tool. The method used for the correlation between the microstructure and mechanical properties confirmed the importance of the phases present in the Dual Phase steel to obtain the desired mechanical properties in the application of the steel

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Zootecnia - FCAV

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Este estudo de caso teve por objetivo analisar a qualidade dos frutos e a produtividade em t/ha de maracujá-amarelo, em dois ciclos anuais, plantados, respectivamente, nos dias 04-10-04 (1º plantio) e 20-08-05 (2º plantio). As mudas da seleção Afruvec foram formadas em tubetes no interior de estufa com tela antiafídeo. O pomar, nos dois ciclos produtivos, foi irrigado por gotejamento, adotando-se uma densidade de 1.600 plantas/ha. O 1º plantio foi erradicado no dia 13-07-05, em função de o pomar apresentar a totalidade das plantas com sintomas típicos do vírus do endurecimento dos frutos (PWV) nas folhas e frutos. No 1º e no 2º plantios, os sintomas tiveram início no dia 26-01-05 e no dia 04-01-06, respectivamente. Não houve necessidade de eliminação de plantas em ambos os plantios, já que o início dos sintomas de PWV ocorreu quando as plantas se encontravam em pleno florescimento. Pelos resultados, pode-se concluir que o manejo adotado regionalmente, com plantio em ciclo anual, permitiu uma ampliação do período de colheita, decorrente da antecipação de plantio no 2º ano; uma produtividade de 16,94 kg/planta e 18,39 kg/planta, no 1º e 2º anos, respectivamente; um aumento da rentabilidade na safra de 2006 em função: da maior produção, melhor cotação dos frutos para mesa e indústria, e aproveitamento dos investimentos realizados no 1º ano. As técnicas empregadas promoveram uma eficiente redução do potencial de inóculo regional, favorecendo uma sustentabilidade na produção.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The development of the stomach of ruminants requires further studies because it is a complex process. Therefore, was analyzed the histology and histomorphometry of reticulum at each gestation period. Samples of Nelore fetuses (Bos taurus indicus) was divided in 5 groups: 1 - fetuses at 9 to 15 weeks (8 to 21cm) of gestation, 2 - fetuses at 16 to 22 weeks (23 to 37cm) 3 - fetuses at 23 to 29 weeks (40 to 58cm), 4 - fetuses at 30 to 36 weeks (61 to 77cm) and 5 - fetuses at 37-43 weeks (79 to 88cm). The histological sections were stained with hematoxylin and eosin and Mallory's trichrome and examined by light microscopy. In group 1, the fetuses with 11 cm, showed mucosal projections that eventually become primary crests, lamina propria and submucosa are fused and external and internal muscular and similar. At 16.5 inches, the primary crests had lamina propria and at 18.5 cm, appeared connections between the ridges. In group 2, at 31 cm started epithelial involvement around the crests. In group 3, the fetuses of 42 cm revealed the first secondary papillae and muscular mucosa in the upper portion of the primary crests. Thereafter, it was increased epithelial due to its positioning around the crests, thickening of the lamina propriasubmucosa, muscular layer, especially the internal muscular and serosa. It was concluded that the most visible changes occur in fetuses belonging to the first 3 groups, measurements for the epithelium, muscle layer and total wall were increasing and the other analyzed layers showed variations during fetal development.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The development of the domestic mammals’ stomach is a complex process, especially in ruminants. The objective of this research was to perform the analysis of structures of this organ during prenatal period. Samples of Nelore fetuses rumen (Bos Taurus indicus) were divided into five groups: 1 - fetuses with 9 to 15 weeks (8 to 21cm) of gestation, 2 - fetuses with 16 to 22 weeks (23 to 37cm), 3 - fetuses at 23 to 29 weeks (40 to 58cm) 4 - fetuses with 30 to 36 weeks (61 to 77cm) and 5 - fetuses with 37 to 43 weeks (79 to 88cm). Sections were stained with Hematoxylin and eosin and Mallory's trichrome and examined at light microscope. In group 1, in fetuses with 11 cm, could be seen all the layers, mucosa with high epithelium and light cells, lamina propria fused with submucosa, the muscular layer was with two thin sublayers similar in thickness and serosa was thin too. With 13.5 cm, was observed the first irregularities in the mucosa with epithelium projections and lamina propria that will lead rumen papillae. With 16.5 cm there was differentiation of the lamina propria to the submucosa. In group 2, in fetuses with 28 cm were observed complete papillae. From this stage, the remaining groups, there was an increase in thickness of the epithelium, lamina propria, submucosal and muscular layer whit the inner sublayer more thicker than the external and serosa. It was concluded that the main variations occur in fetuses of groups 1 and 2, and after this phase, there is increased in thickness of all layers until the end of the pregnancy period.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The research aimed to evaluate the relationship between the thermal environment of the rest pens in a pig slaughterhouse and the surface temperature (ST) of the animals as well as the effect of intermittent water spraying on thermal comfort. There were two visits to slaughter industrial being in each selected three pens of rest, one for control treatment (no spray throughout the period) and two for the treatment of intermittent spraying water (30 minutes intervals with constant spray followed by 30 minutes then turned off). Assessments began at the time of discharging animals in which are taken the thermographic images from lots using an infrared thermographic camera. After housing in the pens, were registered the thermographic images and the respiratory frequency (RF) every five minutes for four hours. Were evaluated the temperature, relative humidity and temperature-humidity index (THI). Considering the values of THI was observed that the animals remained in a condition of comfort only at the time of his arrival at the slaughterhouse. The ST and RF of the animals kept in the pens without sprinkler system (control) showed a linear increase in function of time of day, with increasing temperature. The treatment with intermittent sprinkling of water was observed oscillatory behavior of the ST and RF, however it was always lower than the control treatment, even in times when the water sprinklers were turned off. The time required of spray to reduction and stabilization of the ST of the animals was limited to the combination of temperature and relative humidity, being estimated at 25 minutes at times of higher THI. The maximum environmental temperature during evaluation was 28.4 oC.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

The aim of this work was study the selectivity of insecticides in favor of natural enemies in cotton (Gossypium hirsutum latifolium Hurtch Lr), DeltaOpal cultivar, in the city of Malhada (BA), and to know the associated beneficial fauna. The study was conducted at the agricultural year of 2010/2011. The design was conducted in randomized blocks with six treatments and four replications. The treatments were: (1) Fipronil 200 SC (0.38 L.ha-1); (2) Alphacypermethrin 100 SC (0.30 L.ha-1), (3) Lufenuron 50 EC (0.30 L.ha-1), (4) Imidacloprid 200 SC (0.30 L.ha-1), (5) Methyl parathion 600 EC (1.00 L.ha-1), and (6) control (water). The product was applied 80 days after emergence, and the evaluations were performed one day before application and 1, 7 and 14 days after application (DAA). The samples were taken using the sampling method beating cloth and Moericke traps. Natural enemies were brought to the laboratory for sorting, counting and identification by family. The toxicity of the products ranged according to the group of natural enemies. Imidacloprid is selective to the spiders and insecticides are moderately toxic (Methyl Parathion and Alphacypermethrin: 1 and 14th DAA; Lufenuron: 14th DAA) or toxic (Fipronil and Alphacypermethrin: 7th DAA). Fipronil (1 DAA), Alphacypermethrin (7th DAA) and Methyl  Parathion (14th DAA) are moderately toxic to adult ladybirds. The analyzed insecticides are toxic to the larvae of ladybirds, with more impact until seven days after the application, with the exception of Methyl Parathion classified, as innocuous until this period. The occurrence of 13 families of spiders and 18 families of parasitic Hymenoptera is registered in cotton agroecosystems in the region of Malhada, in the state of Bahia.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)