Active Voltage Control on series connection of IGBTs and diode recovery optimization

In this paper an Active Voltage Control (AVC) technique is presented, for series connection of insulated-gate-bipolar-transistors (IGBT) and control of diode recovery. The AVC technique can control the switching trajectory of an IGBT according to a pre-set reference signal. In series connections, every series connected IGBT follows the reference and so that the dynamic voltage sharing is achieved. Another key advantage for AVC is that by changing the reference signal at turn-on, the diode recovery can be optimised. © 2010 IEEE.

Recovery, growth and carcass composition following periods of restricted ration and full feeding in indian major carp, Rohu (Labeo rohita H.)

A 90-day experiment was conducted to determine the effect of restricted ration and full feeding on the recovery growth and carcass compositions of fingerlings (average weight - 20.74 ± 0.13 g) of rohu, Labeo rohita (H.). Rohu fingerlings procured from a local fish breeder were fed with commercial pelleted feed (27% crude protein) during the two-week acclimatization in the laboratory condition. Experimental pelleted diet (30% crude protein) was prepared and the control group (T sub(CFR)) was fed at 3% of body weight for the 90-day trial period. The experimental group T sub(1FR) was fed for three days at 1% of body weight and the next three days at 3% of body weight, T sub(2FR) was fed for seven days at 1% of body weight and the next seven days at 3% of body weight, T sub(3FR) was fed for 15 days at l% of body weight and the 15 days at 3% of body weight and T sub(4FR) was fed for 25 days at 1% of body weight and the next 25 days at 3% of body weight, alternating between 1 and 3% for the specified period during the 90-day trial period. Daily rations were divided into two equal meals per day at 09.00 and 16.00 hours. Average percent survival rate of rohu during the 90-day trial period was more than 90. Percent live weight gain (98.90 ± 0.34, 113.0 ± 5.93, 125.71 ± 11.01 and 141.90 ± 2.89), specific growth rate (1.53 ± 0.01 1.68 ± 0.06, 1.80 ± 0.10 and 1.96 ± 0.02%/d) and absolute growth rate (1.33 ± 0.13, 1.38 ± 0.07, 1.39 ± 0.04 and 1.44 ± 0.07g/d) of the experimental groups (T sub(1FR), T sub(2FR), T sub(3FR) and T sub(4FR) respectively) increased with the advancement of the experiment in comparison to those in control, T sub(CFR) (90.92 ± 5.81%, 1.44 ± 0.07%/d and 1.34 ± 0.20g/d, respectively) and were proportionately correlated with the degree of deprivation probably through the mechanism of increased feed intake (hyperphagia), feed efficiency ratio or gross growth efficiency, protein efficiency ratio and the superior feed conversion ratio reflecting in better performance index. The body length and muscle composition of fish indicated that recovery growth happened due to protein growth but certainly not due to fat deposition in the gut. Feeding at 1 and 3% of body weight alternating over a period of 25 days might economize the culture operation of rohu.

Observations on the wastage of raw material and recovery of meat in the prawn processing industry

The wastage of prawns due to spoilage in processing factories accounted to about 0-12% in 1974, 0-35% in 1975, 0-3% in 1976 and 0-4% in 1977. Spoilage increases with the time lag between catching and processing and also due to defective icing. The paper discusses the counts of whole prawns required for obtaining meat of specified size grades.

Studies on isolation of salmonella from sea foods 1. Comparison of enrichment and selective media for recovery of salmonellae from fish

Three enrichment broths and six plating media were compared for efficiency of detection Salmonella in the presence of numbers of Coliforms (10super(5)/ml) and proteus (10super(3)/ml) from artificially inoculated fish samples. Recovery experiments Salmonella anatum, S. typhimurium and S. enteritidis indicated that the two enrichment broths Dulcitol Selinite (DSE) and Selinite Cystine (SC) were equally efficient. Further, the viability of Salmonella, inoculated into fish muscle and kept at 4°C for 48 hours, was found to be not affected by the low temperature storage. Selective plating media like Xylose Lysine Deoxycholate agar (XLD), Brilliant Green Sulphadiazine agar (BGS) and Brilliant Green agar (BG) were found to be superior in performance to Salmonella-Shigella agar: (SS) and Bismuth Sui phite agar (BiS).

Fish tagging experiments: a prelude to an extensive tag-recovery programme on Lake Victoria

The present study is an early stage of this programme and examines several species of fishes under controlled conditions to delineate responses to tagging as a function of type of tag, species, size, and sex of fish, and position of tag placement. It is intimately related to another phase of research currently being conducted by the author on age and growth of several species important to the fishery of Lake Victoria (e.g. Tilapia spp., and several catfishes, Clarias mossambicus Peters and Bagrus docmac (Forskal). Data reported are both a reflection of growth studies and an attempt to achieve insight into tag loss, growth, and mortality that might be expected to occur in these species under lake conditions with reference to the above parameters.

Fast L0-based sparse signal recovery

This paper develops an algorithm for finding sparse signals from limited observations of a linear system. We assume an adaptive Gaussian model for sparse signals. This model results in a least square problem with an iteratively reweighted L2 penalty that approximates the L0-norm. We propose a fast algorithm to solve the problem within a continuation framework. In our examples, we show that the correct sparsity map and sparsity level are gradually learnt during the iterations even when the number of observations is reduced, or when observation noise is present. In addition, with the help of sophisticated interscale signal models, the algorithm is able to recover signals to a better accuracy and with reduced number of observations than typical L1-norm and reweighted L1 norm methods. ©2010 IEEE.

Strategies for product recovery decisions

Product recovery is beset by uncertainty regarding the quality of end-of-life (EOL) products, and in order to ascertain the reusability of these products, they have to undergo expensive tests. This undermines the profitability of the recovery process. The key to improve the effectiveness of product recovery is to improve the quality of information available before testing. Emerging data capture technologies can significantly improve the availability of information. However, in order to maximise the potential of these technologies, appropriate decision-making algorithms that exploit such information must be developed. We model the recovery process using a decision-theoretic approach, and derive strategies to ascertain the reusability of EOL products, and also to decide when tests are beneficial. We show that improving the quality of information leads to increase in effectiveness of the recovery process by reducing the need for tests. Copyright © 2009 Inderscience Enterprises Ltd.

Energy recovery from high-frequency clocks using DC-DC converters

Large digital chips use a significant amount of energy to distribute a multi-GHz clock. By discharging the clock network to ground every cycle, the energy stored in this large capacitor is wasted. Instead, the energy can be recovered using an on-chip DC-DC converter. This paper investigates the integration of two DC-DC converter topologies, boost and buck-boost, with a high-speed clock driver. The high operating frequency significantly shrinks the required size of the L and C components so they can be placed on-chip; typical converters place them off-chip. The clock driver and DC-DC converter are able to share the entire tapered buffer chain, including the widest drive transistors in the final stage. To achieve voltage regulation, the clock duty cycle must be modulated; implying only single-edge-triggered flops should be used. However, this minor drawback is eclipsed by the benefits: by recovering energy from the clock, the output power can actually exceed the additional power needed to operate the converter circuitry, resulting in an effective efficiency greater than 100%. Furthermore, the converter output can be used to operate additional power-saving features like low-voltage islands or body bias voltages. ©2008 IEEE.

The potential for thermal energy recovery from wastewater treatment works in Southern England

There is potential to extract energy from wastewater in a number of ways, including: kinetic energy using micro-hydro systems, chemical energy through the incineration of sludge, biomass energy from the biogas produced after anaerobic sludge digestion, and thermal energy as heat. This paper considers the last option and asks how much heat could be recovered under UK climatic conditions and can this heat be used effectively by wastewater treatment plants to reduce their carbon footprint? Four wastewater treatment sites in southern England are investigated and the available heat that can be recovered at those sites is quantified. Issues relating to the environmental, economic and practical constraints on how energy can be realistically recovered and utilised are discussed .The results show there is a definite possibility for thermal energy recovery with potential savings at some sites of up to 35,000 tonnes of total long-cycle carbon equivalent (fossil fuel) emissions per year being achievable. The paper also shows that the financial feasibility of three options for using the heat (either for district heating, sludge drying or thermophilic heating in sludge digestion processes) is highly dependant upon the current shadow price of carbon. Without the inclusion of the cost of carbon, the financial feasibility is significantly limited. An environmental constraint for the allowable discharge temperature of effluent after heat-extraction was found to be the major limitation to the amount of energy available for recovery. The paper establishes the true potential of thermal energy recovery from wastewater in English conditions and the economic feasibility of reducing the carbon footprint of wastewater treatment operations using this approach.

Removal of surface states and recovery of band-edge emission in InAs nanowires through surface passivation.

Surface states in semiconductor nanowires (NWs) are detrimental to the NW optical and electronic properties and to their light emission-based applications, due to the large surface-to-volume ratio of NWs and the congregation of defects states near surfaces. In this paper, we demonstrated an effective approach to eliminate surface states in InAs NWs of zinc-blende (ZB) and wurtzite (WZ) structures and a dramatic recovery of band edge emission through surface passivation with organic sulfide octadecylthiol (ODT). Microphotoluminescence (PL) measurements were carried out before and after passivation to study the dominant recombination mechanisms and surface state densities of the NWs. For WZ-NWs, we show that the passivation removed the surface states and recovered the band-edge emission, leading to a factor of ∼19 reduction of PL linewidth. For ZB-NWs, the deep surface states were removed and the PL peaks width became as narrow as ∼250 nm with some remaining emission of near band-edge surface states. The passivated NWs showed excellent stability in atmosphere, water, and heat environments. In particular, no observable changes occurred in the PL features from the passivated NWs exposed in air for more than five months.