Síntese e caracterização de complexos de Co(II) e Ni(II) com l-dopa, carbidopa e benzimidazol

Were synthesized in this work in the following aqueous solution coordination compounds: [Ni(LDP)(H2O)2Cl2].2H2O, [Co(LDP)Cl2].3H2O, [Ni(CDP)Cl2].4H2O, [Co(CDP)Cl2].4H2O, [Ni(BDZ)2Cl2].4H2O and [Co(BDZ)2Cl2(H2O)2]. These complexes were synthesized by stoichiometric addition of the binder in the respective metal chloride solutions. Precipitation occurred after drying the solvent at room temperature. The characterization and proposed structures were made using conventional analysis methods such as elemental analysis (CHN), absorption spectroscopy in the infrared Fourier transform spectroscopy (FTIR), X-ray diffraction by the powder method and Technical thermoanalytical TG / DTG (thermogravimetry / derivative thermogravimetry) and DSC (differential scanning calorimetry). These techniques provided information on dehydration, coordination modes, thermal performance, composition and structure of the synthesized compounds. The results of the TG curve, it was possible to establish the general formula of each compound synthesized. The analysis of X-ray diffraction was observed that four of the synthesized complex crystal structure which does not exhibit the complex was obtained from Ldopa and carbidopa and the complex obtained from benzimidazole was obtained crystal structures. The observations of the spectra in the infrared region suggested a monodentate ligand coordination to metal centers through its amine group for all complexes. The TG-DTG and DSC curves provide important information and on the behavior and thermal decomposition of the synthesized compounds. The molar conductivity data indicated that the solutions of the complexes formed behave as a nonelectrolyte, which implies that chlorine is coordinated to the central atom in the complex.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obtenção, caracterização e utilização de um compósito com matriz de resina poliéster e carga de fibras de sisal

The constant search for sustainable alternatives has earned great effort of researchers in research and obtaining new materials, encouraging the rise of eco-friendly productive development and providing simple and practical solutions to economic profitability. In this sense, the use of materials derived from natural renewable sources, vegetables, has great potential applicability to sustainable development. As alternative materials plant fibers can be applied to production of a range of composite materials easing the use of materials derived from non-renewable this thesis were sisal mats used for achieving a composite matrix having as one orthophthalic polyester resin. The webs were subjected to surface treatment in boiling water for 15 minutes. The webs of sisal fibers used were, respectively, 5%, 10% and 15% of the composite weight. The composite was obtained and characterized mechanically and thermally to the chosen formulations. several plates of the composite to obtain the body of evidence for the characterization tests complying with the relevant rules were made. The obtained composites showed strength tensile and bending lower than the array, so it can be used where are required low load requests. The most significant result of the composite studied given to the impact energy absorption, far superior to the matrix used. Other properties were highlighted in oil absorption, and density. It proved the feasibility of obtaining the composite for the three formulations studied C5, C10 and C15 being the most feasible to C10. To demonstrate the feasibility of using composite were made a wall clock, a bench, a chair and a shelf, low mechanical stress structures. It was concluded that the sisal rugs exercised the load function in the composite.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Obtenção e caracterização de um compósito de matriz polimérica com carga de bucha vegetal luffa cylindrica

Composite materials arise from the need for lighter materials and with bigger mechanical and thermal resistance. The difficulties of discard, recycling or reuse are currently environmental concerns and, therefore, they are study object of much researches. In this perspective the feasibility of using loofahs (Luffa Cylindrica) for obtainment of a polymeric matrix composite was studied. Six formulations, with 4, 5 and 6 treated layers and untreated, were tested. The loofahs were treated in boiling water to remove lignins, waxes and impurities present in the fibers. After that, they were dried in a direct exposure solar dryer. For the characterization of the composite, thermal (thermal conductivity, thermal capacity, thermal diffusivity and thermal resistivity), mechanical (tensile and bending resistance) and physicochemical (SEM, XRD, density, absorption and degradation) properties were determined. The proposed composite has as advantage the low fiber density, which is around 0.66 g/cm³ (almost half of the polyester resin matrix), resulting in an average composite density of around 1.17g/cm³, 6.0 % lower in relation to the matrix. The treatment carried out in the loofahs increased the mechanical strength of the composite and decreased the humidity absorption. The composite showed lower mechanical behavior than the matrix for all the formulations. The composite also demonstrated itself to be feasible for thermal applications, with a value of thermal conductivity of less than 0.159 W/m.K, ranking it as a good thermal insulator. For all formulations/settings a low adherence between fibers and matrix occurred, with the presence of cracks, showing the fragility due to low impregnation of the fiber by the matrix. This composite can be used to manufacture structures that do not require significant mechanical strength, such as solar prototypes, as ovens and stoves.

Preparação e caracterização de biomateriais poliméricos para avaliação da viabilidade de uso como phantom biológico

The theoretical and experimental developments in the biomaterials area have been directly applied to different fields of Medicine (odontology, regenerative medicine and radiotherapy). These advances have focused both for diagnosing diseases such as for quantifying degrees of progression. From the perspective of these studies, biomaterials are being designed and manufactured for application in various areas of science, provided advances in diagnostic radiology, radiotherapy dosimetry and calibration of radiotherapy equipment. Develop a phantom from a biomaterial has become a great ally of medicine in the treat patients with oncological diseases, allowing better performance of the equipment in order to reduce damage to healthy tissue due to excessive exposure to radiation. This work used polymers: chitosan and gelatin, for making the polymeric structures and controlled for different types of production and processing, characterizing and evaluating the biopolymer by physical techniques (STL, SEM and DEI) and therefore analyze applicability as phantom mouse lung. It was possible to evaluate the morphology of biomaterials quantitatively by scanning electron microscopy associated with imaging technique. The relevance of this work focuses on developing a phantom from polymeric biomaterials that can act as phantom providing high image contrast when subjected to analysis. Thus, the choice of DEI technique is satisfactory since it is an imaging technique of X-ray high resolution. The images obtained by DEI have shown the details of the internal microstructure of the biomaterial produced which have ≈ 10 μm dimension. The phantoms had made density ranging from 0.08 a 0.13 g/cm3.

Síntese e caracterização de ligantes oximas e tiossemicarbazonas e seus complexos

Este trabalho apresenta a síntese e caracterização de cinco ligantes e quatro complexos derivados de oximas e tiossemicarbazonas. Entre essas, discutem-se as estruturas cristalinas/moleculares determinadas por difração de raios-X em monocristais: do ligante 4-feniltiossemicarbazida-isatina (Ligante 5), do complexo piridina-salicilaldeído-4- feniltiossemicarbazona de niquel (II) (Complexo 1), e do bis-4-feniltiossemicarbazonaisatina de chumbo(II) (Complexo 2). A estrutura do Ligante 5 cristaliza no sistema monoclínico, grupo espacial P21/c, com parâmetros de cela a = 6,3227(2) Å, b = 15,7973(7) Å, c = 14,4572(6) Å, β = 93,9330(10)°, V = 1440,61(10) Å3 , Z = 4. O refinamento da estrutura convergiu aos índices de discordância finais R1 = 0,0520, wR2 = 0,1471. Observa-se ainda a ocorrência de interações intermoleculares do tipo ligações de hidrogênio clássicas [N18−H3---O1′ 2,907(2)Å], com a formação de estruturas dímeras inter-relacionadas por simetria dentro da cela cristalina. Para a estrutura cristalina do Complexo 1, observa-se NC=4, e geometria de coordenação quadrada plana, onde o ligante saliciladeído-4-feniltiossemicarbazida comporta-se como quelante tridentado, e completando a esfera de coordenação do centro metálico temos uma molécula de piridina. A estrutura cristaliza no sistema monoclínico, grupo espacial P21/m, parâmetros de cela a = 12,8211(2) Å, b = 5,73370(10) Å, c = 23,9950(4) Å, β = 101,0910(10)°, V = 1730,98(5) Å3 , índices de discordância finais R1= 0,0320, wR2 = 0,0888, Z=3. O Complexo 1 apresenta ainda interações intermoleculares do tipo [N(3)-H(3)---S(1) = 3,5838(17)º, N(3)–H(3A)---S(1) = 160,91(19)º], formando estruturas dímeras e ligação de hidrogênio intramolecular não-clássica do tipo [C(10)-H(10)---N(2) = 2,838(2)º e C(10) – H(10)---N(2) = 122º]. A estrutura cristalina do complexo 2, apresenta duas formas independentes (uma com centro representado por Pb1 e outra por Pb2). Para a unidade com Pb1 temos o complexo composto por duas unidades do Ligante 5, que comportam-se como quelantes tridentados, e a esfera de coordenação é completada por interações intermoleculares do tipo η 2 areno π e através da ligação polarizada com o O1 da moléculas vizinha, o que confere ao íon Pb1 NC=9. A unidade Pb2 apresenta apenas as duas unidades do Ligante 5 coordenadas conferindo-lhe NC=6. A estrutura cristaliza no sistema monoclínico, grupo espacial C2/c, parâmetros de cela a = 37,9747(6) Å, b= 9,51280(10) Å, c = 31,4378(5) Å, β = 125,951(2)°, V= 9193,5(2) Å3 , Z = 4, índices de discordância finais= R1 = 0,0643, wR2 = 0,1227.

Nanofibras de isolado proteico de bijupirá (rachycentron canadum): desenvolvimento, caracterização e avaliação toxicológica

As nanofibras produzidas através de biopolímeros oriundos de materiais biológicos têm tomado espaço no âmbito mundial, estes podem ter sua origem em compostos como a proteína animal, por exemplo, as proteínas de pescado. O presente trabalho teve como objetivo geral desenvolver nanofibras de isolado proteico de Bijupirá (Rachycentron canadum). O isolado proteico de bijupirá (IPB) foi obtido utilizando processo de variação de pH para solubilizar e isolar proteínas. O IPB obtido foi caracterizado quanto sua composição química proximal e suas propriedades físicoquímicas, estruturais e funcionais. O rendimento do IPB foi de 98,17% de proteína, em base seca. A maior solubilidade e a maior capacidade de retenção de água (CRA) do IPB foram obtidas em pH 11 e 21,9 mL.g-1 de proteína, respectivamente. Os perfis eletroforéticos revelaram massas moleculares características de proteínas miofibrilares (miosina e actina). Os principais picos identificados pelas análises de Espectroscopia na Região do Infravermelho (FTIR) são provenientes de ligações peptídicas (ligações amida), como Amida I e II. Os maiores pontos de fusão e de degradação do IPB foram de 259,1°C e 378°C, respectivamente, obtendo assim, um isolado proteico com elevada estabilidade térmica. As nanofibras foram desenvolvidas pela técnica de electrospinnig. Foram preparadas soluções poliméricas utilizando 1% (p/v) de óxido de polietileno (PEO) e 1, 2, 3, 4, 5 e 6% (p/v) de IPB. Os parâmetros utilizados no processo de electrospinning como: potencial elétrico, distância da ponta do coletor a agulha e a taxa de fluxo da solução foram fixados em 16,7 kV, 15 cm, e 150 µL.h-1 , respectivamente. Os efeitos do solvente e a adição de um biopolímero comercial na capacidade de formação e morfologia das nanofibras foram estudados. Em relação ao efeito do solvente na solubilização das proteínas, o processo de electrospinning foi favorecido quando utilizado o ácido fórmico 85% (v/v), como este solvente orgânico promove a formação de estruturas helicoidais aleatórias e, consequentemente, um aumento no emaranhado de biopolímeros. A adição do biopolímero PEO proporcionou melhor viscosidade às soluções de IPB e o desenvolvimento das nanofibras. A morfologia analisada por Microscopia eletrônica de Varredura (MEV) das nanofibras obtidas com 5 e 4% (p/v) de IPB e 1% (/v) de PEO foi de 205 ± 82 nm e 476 ± 107, respectivamente.

Síntese e caracterização de ligantes nitrogenados derivados de isatina, 4-benziltiossemicarbazida e seus complexos com metais d¹º

Neste trabalho são apresentadas e discutidas as estruturas cristalinas e moleculares do ligante (1), isatina-3-(toluilsulfono-hidrazona), dos complexos [bis(2-acetilpiridina-N4 - benziltiossemicarbazona-N,N,S)Cd(II)], (1), [bis (isatina-3-N4 -benziltiossemicarbazonaN,S)Hg(II)].Etanol, (2) e [bis (isatina-3-N4 -benziltiossemicarbazona-N,S,O)Zn(II)].DMF, (3). Cristais amarelos vítreos do ligante (1) foram obtidos a partir da evaporação lenta de etanol do ensaio de cristalização. Seus dados cristalográficos indicam que duas moléculas interagem através de ligações de hidrogênio do tipo N1-H···O1, formando unidades dímeras. A reação entre 2-acetilpiridina-N4 -benziltiossemicarbazona e Cd(CH3COO)2.2H2O, em presença de etanol, KOH, e após evaporação lenta da mistura de acetona e DMF(2:1), resultou em cristais amarelos do complexo (1). As interações do tipo C(10)-H(10)···S(1)···H(1)-N(4), e N(8)- H(29)⋅⋅⋅S(2) permitem a dimerização do complexo, e a formação de uma cadeia unidimensional. Os cristais laranja do complexo (2) foram obtidos da reação entre o ligante isatina-3-N4 -benziltiossemicarbazona e Hg(NO3)2.H2O, na presença de metanol, KOH, e após evaporação lenta de uma mistura de tolueno e acetona (2:1). As moléculas do complexo (2) estão associadas por ligações de hidrogênio do tipo N(63)-H(4)···O(21), essas interações centrossimétricas conduzem a formação de dímeros. A reação entre o ligante isatina-3-N4 - benziltiossemicarbazona e Zn(CH3COO)2.2H2O, em presença de etanol e KOH resultou em cristais de coloração laranja do complexo (3). A estrutura do complexo apresenta múltiplas ligações de hidrogênio, com formação de dímeros através das interações N1-H1···O1 e C3- H3···N(7). Os dímeros associam-se por interações N4-H4···O2 numa cadeia unidimensional ao longo da direção cristalográfica [100]. A polimerização bidimensional é observada 7 considerando-se as interações do tipo C20-H20···S1, N8-H8···S2 ao longo da direção cristalográfica [010], bem como das interações, N5-H5···O3DMF e C31-H31B···Car, que ocorrem através da molécula de solvente DMF.

Caracterização da qualidade da água para rega nas captações do sistema Alqueva-Pedrogão

O Empreendimento de Fins Múltiplos de Alqueva (EFMA) é um projecto estruturante centrado na barragem do Alqueva, que pretende garantir o recurso Água na região e com isso viabilizar uma série de infra-estruturas que contribuirão para o desenvolvimento, em termos económicos e sociais, de uma das regiões mais desfavorecidas da Europa. O EFMA é constituído pelo "Reservatório Mãe" e por um conjunto de outras albufeiras de menor dimensão, interligados por uma rede com cerca de dois mil quilómetros de canais e condutas e mais de meia centena de estações de bombagem, contemplando os seguintes usos da água: - Abastecimento público. - Fornecimento de água para o desenvolvimento de actividades agrícolas e agro-industriais; - Produção de energia; Este trabalho tem por objectivo avaliar a adequabilidade da qualidade da água para o uso rega na origem e produzir informação adequada de suporte à decisão. Os resultados obtidos permitem afirmar que de um modo geral a qualidade da água captada no sistema Alqueva- Pedrógão é adequada para o uso rega, apesar de se verificar uma persistente contaminação de coliformes fecais. ABSTRACT; The Multipurpose Alqueva Project (EFMA- Empreendimento de Fins Múltiplos de Alqueva) is a groundwork project centred in Alqueva dam and its reservoir, which intends to guarantee a strategic water reserve in the region, and therefore making possible a series of associated infrastructures, contributing for the potential development of the region, in economic and social terms, in one of the most poorest regions of Europe. The EFMA includes a "Main Reservoir" and set of other dams with lesser dimension, connected by a several canals and pipelines about two thousand kilometers long (including Primary and Secondary Network), and about 50 pumping stations, with the goal of attaining the following main objectives: - Water supply for the development of agricultural and agro-industrial activities; - Production of energy; - Public Water Supply. This study intends to evaluate the suitability of water quality in the origin for irrigation use and to achieve adequate information for support decision. The results have revealed that the quality of water abstracted in the Alqueva - Pedrógão System is suitable for irrigation, although the persistent contamination of fecal coliforms.

Reforço sísmico de estruturas em adobe

A construção em alvenaria de adobe tem um vasto património a nível mundial. É possível encontrar construção em terra no nosso território, sendo que a técnica particular do adobe foi amplamente utilizada na região de Aveiro durante o século XIX até meados do século XX. Devido à tradição e valor patrimonial da construção em alvenaria de adobe, diversos trabalhos têm vindo a ser desenvolvidos no departamento de Engenharia Civil da Universidade de Aveiro, perspetivando um aprofundar de conhecimentos acerca deste tipo de construção. A vulnerabilidade sísmica das construções em alvenaria de adobe fez com que surgissem vários estudos para caracterização sísmica das mesmas, sendo que, recentemente, foi levada a cabo a realização de um ensaio cíclico, simulando os efeitos de um sismo, num modelo de adobe à escala real, construído no laboratório do departamento de Engenharia Civil da Universidade de Aveiro. A presente dissertação tem como objetivo estudar formas de reparação e reforço sísmico de estruturas em adobe. Para isso foi reparado e reforçado o modelo previamente ensaiado, e novamente submetido a um ensaio cíclico, de modo a fazer-se uma análise comparativa com o ensaio prévio e assim retirar conclusões sobre a eficácia da solução de reforço aplicada.

Síntese, caracterização e reatividade de complexos organoestânicos contendo bases de Schiff derivadas de aminoácidos com carbonilas de Mo. W e Re

Tese (doutorado)–Universidade de Brasília, Instituto de Química, Programa de Pós-Graduação em Química, 2015.

Vicilinas de sementes de leguminosas selvagens:purificação, caracterização, efeito de deletério e mecanismo de ação para bruquídeos e para fungos fitopatogênicos

Globulins fractions of legume seeds of Crotalaria pallida, Erytrina veluntina and Enterolobium contortisiliquum were isolated and submitted to assays against serine, cysteine and aspartic proteinases, as also amylase present in midgut of C. maculatus and Z. subfasciatus. Hemagglutination assays indicated presence of a lectin in E. veluntina globulin fractions. This lectin had affinity to human erythrocytes type A, B and O. Vicilins were purified by chromatography on Sephacryl S-300 followed of a chromatography on Sephacryl S-200, which was calibrated using protein markers. Vicilins from C. pallida (CpV) and E. veluntina (EvV) seeds had a molecular mass of 124.6 kDa and E. contortisiliquum a molecular mass of 151kDa. Eletrophoresis in presence of SDS showed that CpV was constituted by four subunities with apparent molecular mass of 66, 63, 57 and 45 kDa, EvV with three subunities with apparent molecular mass of 45kDa and EcV four subunities, two with 37.1 kDa and two with 25.8 kDa. Non denaturantig eletrophoresis displayed single bands with high homogeneity, where CpV had lower acidic behavior. All vicilins are glycoproteins with carbohydrate contents at 1 to1.5%. Bioassays were done to detect deleterious effects of vicilins against C. maculatus and Z. subfasciatus larvae. CpV, EvV and EcV exhibited a WD50 of 0.28, 0.19 and 1.03%; LD50 0.2, 0.26, and 1.11% respectively to C. maculatus. The dose responses of CpV, EvV and EcV to Z. subfasciatus were: WD50 of 0.12, 0.14, 0.65% and LD50 of 0.09, 0.1, and 0.43% respectively. The mechanism of action of these proteins to bruchids should be based on their properties of bind to chitin present in mid gut of larvae associated with the low digestibility of vicilin. In assays against phytopatogenous fungus, only EcV was capable of inhibit F. solani growth at concentrations of 10 and 20 µg and its action mechanism should be also based in the affinity of EcV to chitin present in the fungi wall

Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment

Caracterização de atapulgita visando aplicação para reforço de materiais poloméricos

The clay mineral attapulgite is a group of hormitas, which has its structures formed by microchannels, which give superior technological properties classified the industrial clays, clays of this group has a very versatile range of applications, ranging from the drilling fluid for wells oil has applications in the pharmaceutical industry. Such properties can be improved by activating acid and / or thermal activation. The attapulgite when activated can improve by up to 5-8 times some of its properties. The clay was characterized by X-ray diffraction, fluorescence, thermogravimetric analysis, differential thermal analysis, scanning electron microscopy and transmission electron microscopy before and after chemical activation. It can be seen through the results the efficiency of chemical treatment, which modified the clay without damaging its structure, as well as production of polymer matrix composites with particles dispersed atapugita