Aplicação de um modelo de programação linear inteira mista (PLIM) na expansão da rede de distribuição de energia elétrica em Angola

Em Angola, apenas cerca de 30% da população tem acesso à energia elétrica, nível que decresce para valores inferiores a 10% em zonas rurais mais remotas. Este problema é agravado pelo facto de, na maioria dos casos, as infraestruturas existentes se encontrarem danificadas ou não acompanharem o desenvolvimento da região. Em particular na capital angolana, Luanda que, sendo a menor província de Angola, é a que regista atualmente a maior densidade populacional. Com uma população de cerca de 5 milhões de habitantes, não só há frequentemente problemas relacionados com a falha do fornecimento de energia elétrica como há ainda uma percentagem considerável de municípios onde a rede elétrica ainda nem sequer chegou. O governo de Angola, no seu esforço de crescimento e aproveitamento das suas enormes potencialidades, definiu o setor energético como um dos fatores críticos para o desenvolvimento sustentável do país, tendo assumido que este é um dos eixos prioritários até 2016. Existem objetivos claros quanto à reabilitação e expansão das infraestruturas do setor elétrico, aumentando a capacidade instalada do país e criando uma rede nacional adequada, com o intuito não só de melhorar a qualidade e fiabilidade da rede já existente como de a aumentar. Este trabalho de dissertação consistiu no levantamento de dados reais relativamente à rede de distribuição de energia elétrica de Luanda, na análise e planeamento do que é mais premente fazer relativamente à sua expansão, na escolha dos locais onde é viável localizar novas subestações, na modelação adequada do problema real e na proposta de uma solução ótima para a expansão da rede existente. Depois de analisados diferentes modelos matemáticos aplicados ao problema de expansão de redes de distribuição de energia elétrica encontrados na literatura, optou-se por um modelo de programação linear inteira mista (PLIM) que se mostrou adequado. Desenvolvido o modelo do problema, o mesmo foi resolvido por recurso a software de otimização Analytic Solver e CPLEX. Como forma de validação dos resultados obtidos, foi implementada a solução de rede no simulador PowerWorld 8.0 OPF, software este que permite a simulação da operação do sistema de trânsito de potências.

Algoritmo de controlo inteligente de microprodução para regulação de tensão em redes de baixa tensão

Com o constante desenvolvimento da sociedade, o consumo de energia elétrica tem aumentado gradualmente, por outro lado a preocupação com o meio ambiente e a necessidade de um desenvolvimento sustentável, faz com que a legislação atual favoreça a introdução de fontes de energia de origem renovável em detrimento de fontes de energia de origem fóssil. Cada vez mais têm surgido incentivos para a implementação de pequenos sistemas de produção em instalações de utilização, estes consumidores/produtores são denominados de prosumers, sendo este tipo de produtores ligados à rede elétrica de baixa tensão. Com a introdução deste tipo de produtores é necessário dotar a rede elétrica de meios que permitam ao operador da rede monitorizar e controlar em tempo real o estado da rede assim como destes novos produtores. No âmbito desta dissertação, foi desenvolvido um algoritmo de controlo inteligente de microprodução. Avaliando o consumo, a produção, entre outros parâmetros de gestão da rede, este algoritmo calculará um conjunto de set-points que deverão ser enviados para os microprodutores de modo a limitar a potência injetada na rede e assim controlar a tensão. Também foi realizado um estudo económico do impacto que as medidas propostas teriam do ponto de vista dos gestores da rede bem como do ponto de vista dos microprodutores.

Distributed Forest Fire Monitoring Using Wireless Sensor Networks

Disaster management is one of the most relevant application fields of wireless sensor networks. In this application, the role of the sensor network usually consists of obtaining a representation or a model of a physical phenomenon spreading through the affected area. In this work we focus on forest firefighting operations, proposing three fully distributed ways for approximating the actual shape of the fire. In the simplest approach, a circular burnt area is assumed around each node that has detected the fire and the union of these circles gives the overall fire’s shape. However, as this approach makes an intensive use of the wireless sensor network resources, we have proposed to incorporate two in-network aggregation techniques, which do not require considering the complete set of fire detections. The first technique models the fire by means of a complex shape composed of multiple convex hulls representing different burning areas, while the second technique uses a set of arbitrary polygons. Performance evaluation of realistic fire models on computer simulations reveals that the method based on arbitrary polygons obtains an improvement of 20% in terms of accuracy of the fire shape approximation, reducing the overhead in-network resources to 10% in the best case.

Sensor Integration for Smart Cities Using Multi-Hop Networks

Smart Cities are designed to be living systems and turn urban dwellers life more comfortable and interactive by keeping them aware of what surrounds them, while leaving a greener footprint. The Future Cities Project [1] aims to create infrastructures for research in smart cities including a vehicular network, the BusNet, and an environmental sensor platform, the Urban Sense. Vehicles within the BusNet are equipped with On Board Units (OBUs) that offer free Wi-Fi to passengers and devices near the street. The Urban Sense platform is composed by a set of Data Collection Units (DCUs) that include a set of sensors measuring environmental parameters such as air pollution, meteorology and noise. The Urban Sense platform is expanding and receptive to add new sensors to the platform. The parnership with companies like TNL were made and the need to monitor garbage street containers emerged as air pollution prevention. If refuse collection companies know prior to the refuse collection which route is the best to collect the maximum amount of garbage with the shortest path, they can reduce costs and pollution levels are lower, leaving behind a greener footprint. This dissertation work arises in the need to monitor the garbage street containers and integrate these sensors into an Urban Sense DCU. Due to the remote locations of the garbage street containers, a network extension to the vehicular network had to be created. This dissertation work also focus on the Multi-hop network designed to extend the vehicular network coverage area to the remote garbage street containers. In locations where garbage street containers have access to the vehicular network, Roadside Units (RSUs) or Access Points (APs), the Multi-hop network serves has a redundant path to send the data collected from DCUs to the Urban Sense cloud database. To plan this highly dynamic network, the Wi-Fi Planner Tool was developed. This tool allowed taking measurements on the field that led to an optimized location of the Multi-hop network nodes with the use of radio propagation models. This tool also allowed rendering a temperature-map style overlay for Google Earth [2] application. For the DCU for garbage street containers the parner company provided the access to a HUB (device that communicates with the sensor inside the garbage containers). The Future Cities use the Raspberry pi as a platform for the DCUs. To collect the data from the HUB a RS485 to RS232 converter was used at the physical level and the Modbus protocol at the application level. To determine the location and status of the vehicles whinin the vehicular network a TCP Server was developed. This application was developed for the OBUs providing the vehicle Global Positioning System (GPS) location as well as information of when the vehicle is stopped, moving, on idle or even its slope. To implement the Multi-hop network on the field some scripts were developed such as pingLED and “shark”. These scripts helped upon node deployment on the field as well as to perform all the tests on the network. Two setups were implemented on the field, an urban setup was implemented for a Multi-hop network coverage survey and a sub-urban setup was implemented to test the Multi-hop network routing protocols, Optimized Link State Routing Protocol (OLSR) and Babel.

Cost allocation model for distribution networks considering high penetration of distributed energy resources

The high penetration of distributed energy resources (DER) in distribution networks and the competitive environment of electricity markets impose the use of new approaches in several domains. The network cost allocation, traditionally used in transmission networks, should be adapted and used in the distribution networks considering the specifications of the connected resources. The main goal is to develop a fairer methodology trying to distribute the distribution network use costs to all players which are using the network in each period. In this paper, a model considering different type of costs (fixed, losses, and congestion costs) is proposed comprising the use of a large set of DER, namely distributed generation (DG), demand response (DR) of direct load control type, energy storage systems (ESS), and electric vehicles with capability of discharging energy to the network, which is known as vehicle-to-grid (V2G). The proposed model includes three distinct phases of operation. The first phase of the model consists in an economic dispatch based on an AC optimal power flow (AC-OPF); in the second phase Kirschen's and Bialek's tracing algorithms are used and compared to evaluate the impact of each resource in the network. Finally, the MW-mile method is used in the third phase of the proposed model. A distribution network of 33 buses with large penetration of DER is used to illustrate the application of the proposed model.

Configuração de sistema de monitorização

O presente trabalho enquadra-se na área das redes de computadores, fazendo referência aos protocolos e ao conjunto de equipamentos e softwares necessários para a administração, controlo e monitorização desse tipo de infra-estruturas. Para a gestão de uma rede de dados, é essencial dispor de conhecimentos e documentação de nível técnico para representar da forma mais fiel possível a configuração da rede, seguindo passo a passo a interligação entre equipamentos existentes e oferecendo assim uma visão o mais fidedigna possível das instalações. O protocolo SNMP é utilizado em larga escala sendo praticamente um standard para a administração de redes baseadas na tecnologia TCP/IP. Este protocolo define a comunicação entre um administrador e um agente, estabelecendo o formato e o significado das mensagens trocadas entre ambos. Tem a capacidade de suportar produtos de diferentes fabricantes, permitindo ao administrador manter uma base de dados com informações relevantes da monitorização de vários equipamentos, que pode ser consultada e analisada por softwares NMS concebidos especialmente para a gestão de redes de computadores. O trabalho apresentado nesta dissertação teve como objectivo utilizar uma ferramenta NMS, para fazer a monitorização e a gestão da infra-estrutura de comunicações de forma que permitisse conhecer em tempo real o estado dos elementos de rede, ajudar no diagnóstico de possíveis problemas, instalados pela Nonius nos diversos navios da frota Douro Azul. O software NMS escolhido utiliza as potencialidades do protocolo SNMP para adquirir dados de monitorização de equipamentos de rede presentes na rede, bem como monitorizar redes remotas.

Impacto da infiltração e afluência de águas pluviais na rede de saneamento

A existência de contribuições significativas de águas de infiltração e de águas pluviais nas redes de drenagem de águas residuais urbanas, motivaram a realização deste trabalho. Este estudo foi realizado no sistema de saneamento de Gondomar, utilizando os registos de caudais e qualidade das águas residuais em quatro estações de tratamento de águas residuais, durante quatro anos. O principal objectivo deste trabalho foi estimar as afluências de infiltração e precipitação ao sistema de saneamento e a identificação dos subsistemas críticos. Concluiu-se que a percentagem de volume excedente é cerca de 30% nos anos com maior ocorrência de precipitação. O propósito deste estudo foi também apresentar soluções para este problema, incluindo técnicas de inspecção e reparação dos elementos de drenagem, as quais foram definidas para os subsistemas identificados como críticos, Freixo e Rio Tinto. No Freixo mostrou-se importante a inspecção dos colectores, ramais e câmaras de visita, uma vez que o caudal afluente a este subsistema é muito superior ao esperado e a água residual apresenta-se diluída. Em Rio Tinto evidenciou-se como prioritária a detecção e eliminação de ligações abusivas, dado que são frequentes as ocorrências de exfiltração, com danos significativos. Para além das técnicas de detecção apresentadas considera-se que é necessário manter a monitorização de caudais e recipitação nos subsistemas, e se possível com registo contínuo ao longo do dia. Para a quantificação de precipitação é sugerida a utilização de três udómetros, de forma a permitir estabelecer com maior exactidão, a relação entre as contribuições pluviais e o caudal afluente. São apresentadas propostas, que incluem além de inspecções, ensaios e reparações, como um ponto de partida para a recolha de informação para actualização do adastro, com vista a uma futura aplicação da modelação matemática de previsão do comportamento destes subsistemas.

Social Media Integration in Video Games GameNshare: A Social Overlay for Desktop Games

The ever increasing popularity of social media makes it a promising source for the personalization of gameplay experiences. Furthermore, involving social network friends in a game can greatly enrich the satisfaction of the player and also attract potential novel players to a game. This master thesis describes a social overlay designed for desktop games, called GameNshare. It allows players to easily capture and share with multiple social networks game-related screenshots, videos and stories. Additionally, it also provides asynchronous multiplayer game mechanics to directly integrate social network friends in the game. GameNshare was designed to interact with the users in a non-intrusive way allowing them to be in complete control of what is shared. It prevents unsolicited sharing of messages, a key problem in social media integration tools, by the use of built-in message monitoring and anti-spam measures. GameNshare was specially designed for players aged from 18 to 25 years that are regular users of Twitter and Facebook. It was tested by a group of 10 individuals from the target age range that were surveyed to capture their insights on the use of the social overlay. The implemented GameNshare features were well accepted by the testers that were also useful in highlighting features for future development. GameNshare ultimate goal is to make players look and ask for social integration and allow them to take full advantage of their social communities to improve gaming experiences.

The optimum size of the portuguese public hospital

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Fixed-mobile integration

Often, fixed-line incumbents also own the largest mobile network. We consider the effect of this joint ownership on market outcomes. Our model predicts that while fixed-to-mobile call prices to the integrated mobile network are more efficient than under separation, those to rival mobile networks are distorted upwards, amplifying any incumbency advantage. As concerns potential remedies, a uniform off-net pricing constraint leads to higher welfare than functional separation and even allows to maintain some of the efficiency gains.

Opening Pousada da Serra da Estrela in Covilhã: A two-way impact analysis - Interacting with public agents

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Dynamic adaptation of interaction models for stateful web services

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

A new credit monitoring framework for agents' networks

The purpose of this work is to develop a practicable approach for Telecom firms to manage the credit risk exposition to their commercial agents’ network. Particularly it will try to approach the problem of credit concession to clients’ from a corporation perspective and explore the particular scenario of agents that are part of the commercial chain of the corporation and therefore are not end-users. The agents’ network that served as a model for the presented study is composed by companies that, at the same time, are both clients and suppliers of the Telecommunication Company. In that sense the credit exposition analysis must took into consideration all financial fluxes, both inbound and outbound. The current strain on the Financial Sector in Portugal, and other peripheral European economies, combined with the high leverage situation of most companies, generates an environment prone to credit default risk. Due to these circumstances managing credit risk exposure is becoming increasingly a critical function for every company Financial Department. The approach designed in the current study combined two traditional risk monitoring tools: credit risk scoring and credit limitation policies. The objective was to design a new credit monitoring framework that is more flexible, uses both external and internal relationship history to assess risk and takes into consideration commercial objectives inside the agents’ network. Although not explored at length, the blueprint of a Credit Governance model was created for implementing the new credit monitoring framework inside the telecom firm. The Telecom Company that served as a model for the present work decided to implement the new Credit Monitoring framework after this was presented to its Executive Commission.

Should my company use Bitcoin?

This work project analyses the possibility for a company to trade their goods and services for bitcoins, by joining the Bitcoin network. It analyses the technological and business requirements to join the Bitcoin Network by looking at Bitcoin’s potential to act as a mean of exchange for trade, unit of account and store of value. The analysis points to the motives, benefits and risks for investors to use the Bitcoin as a traditional currency and recommends on strategies for addressing those risks and maximizing benefits. Other than companies this report, to a lesser extent, will also analyse the Bitcoin from an investor’s point of view, this is, should an investor buy bitcoins for trade and make savings on a regular and everyday basis? A major finding in this work project is that companies could start using the Bitcoin system as a legit form of payment since the benefits of using this technology outweigh the costs and risks, given the right approach. This form of payment will contribute for the upgrade of a company’s business’ image, attract a new pool of consumers and businesses that already trade in bitcoins and pressure existing financial institutions and electronic payment vendors to upgrade their service levels.

Synthesis and characterization of novel 4H-pyran-4-ylidene indole-based heterocyclic systems for several optical applications

The development of organic materials displaying high two-photon absorption (TPA) has attracted much attention in recent years due to a variety of potential applications in photonics and optoelectronics, such as three-dimensional optical data storage, fluorescence imaging, two-photon microscopy, optical limiting, microfabrication, photodynamic therapy, upconverted lasing, etc. The most frequently employed structural motifs for TPA materials are donor–pi bridge–acceptor (D–pi–A) dipoles, donor–pi bridge–donor (D–pi–D) and acceptor–pi bridge-acceptor (A–pi–A) quadrupoles, octupoles, etc. In this work we present the synthesis and photophysical characterization of quadrupolar heterocyclic systems with potential applications in materials and biological sciences as TPA chromophores. Indole is a versatile building block for the synthesis of heterocyclic systems for several optoelectronic applications (chemosensors, nonlinear optical, OLEDs) due to its photophysical properties and donor electron ability and 4H-pyran-4-ylidene fragment is frequently used for the synthesis of red light-emitting materials. On the other hand, 2-(2,6-dimethyl-4H-pyran-4-ylidene)malononitrile (1) and 1,3-diethyl-dihydro-5-(2,6-dimethyl-4H-pyran-4-ylidene)-2-thiobarbituric (2) units are usually used as strong acceptor moieties for the preparation of π-conjugated systems of the push-pull type. These building blocks were prepared by Knoevenagel condensation of the corresponding ketone precursor with malononitrile or 1,3-diethyl-dihydro-2-thiobarbituric acid. The new quadrupolar 4H-pyran-4-ylidene fluorophores (3) derived from indole were prepared through condensation of 5-methyl-1H-indole-3-carbaldehyde with the acceptor precursors 1 and 2, in the presence of a catalytical amount of piperidine. The new compounds were characterized by the usual spectroscopic techniques (UV-vis., FT-IR and multinuclear NMR - 1H, 13C).