Localization of the cannabinoid CB1 receptor and the 2-AG synthesizing (DAGLα) and degrading (MAGL, FAAH) enzymes in cells expressing the Ca(2+)-binding proteins calbindin, calretinin, and parvalbumin in the adult rat hippocampus.

The retrograde suppression of the synaptic transmission by the endocannabinoid sn-2-arachidonoylglycerol (2-AG) is mediated by the cannabinoid CB1 receptors and requires the elevation of intracellular Ca(2+) and the activation of specific 2-AG synthesizing (i.e., DAGLα) enzymes. However, the anatomical organization of the neuronal substrates that express 2-AG/CB1 signaling system-related molecules associated with selective Ca(2+)-binding proteins (CaBPs) is still unknown. For this purpose, we used double-label immunofluorescence and confocal laser scanning microscopy for the characterization of the expression of the 2-AG/CB1 signaling system (CB1 receptor, DAGLα, MAGL, and FAAH) and the CaBPs calbindin D28k, calretinin, and parvalbumin in the rat hippocampus. CB1, DAGLα, and MAGL labeling was mainly localized in fibers and neuropil, which were differentially organized depending on the hippocampal CaBPs-expressing cells. CB(+) 1 fiber terminals localized in all hippocampal principal cell layers were tightly attached to calbindin(+) cells (granular and pyramidal neurons), and calretinin(+) and parvalbumin(+) interneurons. DAGLα neuropil labeling was selectively found surrounding calbindin(+) principal cells in the dentate gyrus and CA1, and in the calretinin(+) and parvalbumin(+) interneurons in the pyramidal cell layers of the CA1/3 fields. MAGL(+) terminals were only observed around CA1 calbindin(+) pyramidal cells, CA1/3 calretinin(+) interneurons and CA3 parvalbumin(+) interneurons localized in the pyramidal cell layers. Interestingly, calbindin(+) pyramidal cells expressed FAAH specifically in the CA1 field. The identification of anatomically related-neuronal substrates that expressed 2-AG/CB1 signaling system and selective CaBPs should be considered when analyzing the cannabinoid signaling associated with hippocampal functions.

Volatility smile extrapolation with an artificial neural network

I use a multi-layer feedforward perceptron, with backpropagation learning implemented via stochastic gradient descent, to extrapolate the volatility smile of Euribor derivatives over low-strikes by training the network on parametric prices.

Excision of the Staphylococcal Cassette Chromosome mec (SCCmec) and its crucial role in the horizontal transfer of methicillin resistance in staphylococci.

Staphylococcus aureus est un pathogène humain majeur ayant développé des résistances contre la quasi totalité des antibiotiques disponibles, incluant la très importante famille des β- lactamines. La résistance à cette classe d'antibiotiques est conférée par la « Staphylococcal Cassette Chromosome mec » (SCCmec), qui est un élément génétique mobile capable de s'insérer dans le chromosome bactérien et capable d'être transféré horizontalement chez d'autres staphylocoques. Le mécanisme moléculaire impliqué dans ce transfert horizontal demeure largement inconnu. L'une des premières étapes du transfert est l'excision du SCC mec du chromosome bactérien. Cette excision est promue par des enzymes codées par l'élément SCCmec lui- même et appelées de ce fait « Cassette Chromosome Recombinases » (Ccr). L'un des buts de ce travail de thèse a été de comprendre la régulation de l'expression des gènes codant pour les Ccr recombinases. En utilisant des outils moléculaires originaux, nous avons été en mesure de démontrer en premier lieu que les Ccr recombinases étaient exprimées de façon « bistable », c'est à dire qu'uniquement quelques pourcents de cellules dans une population exprimaient ces gènes à un temps donné. Dans un deuxième temps, nous avons également démontré que l'expression de ces gènes était régulée par des facteurs étrangers au SCC mec. L'expression bistable des recombinases est un concept important. Effectivement, cela permet à la majorité des cellules d'une population de conserver l'élément SCC mec, alors que seulement une petite fraction le perd afin de le rendre disponible pour un transfert. Ainsi, alors que l'élément SCC mec continue de se propager avec la multiplication des bactéries Staphylococcus aureus résistant à la méticilline (SARM), il peut être simultanément transmis à des souches susceptibles (Staphylococcus aureus susceptible à la méticilline, SASM), entraînant l'apparition de nouveaux SARM. De façon très intéressante, le fait que cette bistabilité est contrôlée par les bactéries, et non le SCCmec lui-même, montre que la décision de transférer ou non la cassette SCC mec appartient à la bactérie. En conséquence, il doit exister dans la nature des souches qui sont plus ou moins aptes à effectuer ce transfert. En nous appuyant sur ces observations, nous avons montré que l'excision du SCC mec était effectivement régulée de façon très étroite au cours de la division cellulaire, et ne se passait que pendant un temps limité au début de la croissance. Ce résultat est compatible avec une régulation génétique commandée par la densité cellulaire, qui pourrait être dépendante de la production de signaux extracellulaires, du type que l'on rencontre dans le quorum sensing. Les signaux hypothétiques entraînant l'excision du SCC mec restent inconnus à l'heure actuelle. La connaissance de ces signaux pourrait se révéler très importante afin de développer des stratégies pour interférer avec la dissémination de la résistance au β-lactamines. Deux sujets additionnels ont été logiquement investigués au vu de ces premiers résultats. Premièrement, si certaines souches de SARM sont plus ou moins aptes à déclencher l'excision du SCC mec, de même certaines souches de SASM devraient être plus ou moins aptes à acquérir cet élément. Deuxièmement, afin d'étudier ces mécanismes de transfert au niveau épidémiologique, il nous a été nécessaire de développer des outils nous permettant d'explorer le phénomène à une plus large échelle. Concernant le premier point, il a été postulé que certains SASM seraient réfractaires à l'intégration génomique d'un SCC mec en raison de polymorphismes particuliers à proximité du site d'insertion chromosomique (attB). En étudiant plus de 40 isolais de S. aureus, provenant de porteurs sains, nous avons confirmé ce polymorphisme dans l'environnement à'attB. De plus, nous avons pu montrer que ces régions polymorphiques ont évolué parallèlement à des groupes phylogénétiques bien connus. Ainsi, si des telles régions réfractaires à l'intégration de SCC mec existent, celles-ci devraient ségréger dans des complexes clonaux bien définis qui devraient être facilement identifiables au niveau épidémiologique. Concernant le second point, nous avons été capables de construire un système rapporteur de l'excision du SCCmec, en utilisant un plasmide à faible copie. Ce système consistait en un promoteur fort et un gène codant pour une protéine verte fluorescente (GFP) sous le contrôle d'un promoteur fort séparés à l'aide d'un élément SCC artificiel portant trois terminateurs de transcription. Ainsi, la fluorescence ne s'exprime que si l'élément SCC est excisé du plasmide. Ce système a été testé avec succès dans plusieurs types de staphylocoques, et est actuellement évalué dans d'autres souches et conditions stimulant ou inhibant l'excision. De manière générale, cette dissertation représente parcours scientifique à travers plusieurs aspects d'un problème de santé publique majeur en rapport avec la résistance bactérienne aux antibiotiques. Ce travail s'attaque à des problèmes fondamentaux concernant le transfert horizontal de l'élément SCC mec. De plus, il s'intéresse à des aspects plus généraux de cet élément génétique mobile qui pourraient se révéler très importants en terme de mouvement de gènes au sein des staphylocoques, voir d'autres bactéries gram-positives. Finalement ce travail de thèse met en place le fondamentaux requis pour des recherches futures visant à interférer avec le transfert horizontal de la résistance aux β-lactamines. - Staphylococcus aureus is a major human pathogen. Moreover, S. aureus have developed resistance to almost all available antibiotics, including the important family of β-lactam molecules. Intrinsic resistance to β-lactams is conferred by the Staphylococcal Cassette Chromosome mec (SCCmec), which is a mobile genomic island that inserts into the staphylococcal chromosome and can be horizontally transferred into other staphylococci. However, little is known about the molecular mechanisms involved in this horizontal transfer into naïve strains. One of the first steps in SCC mec horizontal transfer is its excision from the chromosome. Excision is mediated by recombinase enzymes that are encoded by SCC mec itself, and named accordingly Ccr recombinases - for Cassette Chromosome recombinases. One goal of this thesis was to understand the regulation these recombinase genes. By using original molecular tools we could demonstrate first that the Ccr recombinases were expressed in a "bistable" manner, i.e. in only few percentages of the bacterial cells at a given time, and second that they were regulated by determinants that were not encoded on the SCC mec element, but elsewhere on the staphylococcal genome. "Bistable" expression Ccr recombinases is an important concept. It allows SCC mec to be excised and thus available for horizontal transfer, while ensuring that only some cells, but not the whole population, loose their valuable SCC mec genes. Thus, while the SCC mec element expands with the multiplication of the MRSA colony, it can simultaneously be transmitted into methicillin-susceptible S. aureus (MSSA), which convert into new MRSA. Most interestingly, the fact that bistability was regulated by the cells, rather than by SCC mec, indicates that it was the choice of the bacteria to trigger or not SCC mec transfer. As a consequence, there must be, in nature, staphylococcal strains that are more or less prone to sustain SCC mec transfer. Following these seminal observations we found that excision was indeed tightly regulated during bacterial division, and occurred only during a limited period of time at the beginning of bacterial growth. This is compatible with cell-density mediated gene regulation, and may depend on the production of extracellular signal molecules that transmit appropriate orders to neighboring cells, such as in quorum sensing. The potential signal triggering SCCmec excision is as yet unknown. However, it could be critical in promoting the horizontal transfer of methicillin resistance, or for the possible development of means to interfere with it. Two additional hypothesis were logically investigated in the view of these first results. First, if some strains of MRSA might be more prone than others to promote SCC mec excision, then some strains of MS SA might be more or less prone to acquire the element as well. Second, to investigate these multiple mechanisms at an epidemiological level, one would need to develop tools amenable to explore S. aureus strains at a larger scale. Regarding the first issue, it was postulated by others that some MSSA might be refractory to SCC mec integration because they had peculiar DNA polymorphisms in the vicinity of the site-specific chromosomal entry point {attB) of SCC mec. By studying >40 S. aureus isolates from healthy carriers, we confirmed the polymorphism of the attB environment. Moreover, we could show that these polymorphic regions co-evolved with well-known phylogenic clonal clusters. Therefore, if SCCwec-refractory attB environments exist, then they would segregate in well- defined S. aureus clonal clusters that would be easy to identify at the epidemiological level. Regarding the second issue, we were able to construct a new excision reporter system in a low copy number S. aureus plasmid. The reporter system consists in a strong promoter driving a green fluorescent protein {gfp) gene, separated by an artificial SCC-like element carrying three transcriptional terminators. Thus, fluorescence is not expressed unless the SCC-like element is excised. The system has been successfully tested in several aureus and non- aureus staphylococci, and is now being applied to more strains and various excision- triggering or inhibiting conditions. Altogether the dissertation is a scientific journey through various aspects of a salient medical problem with regard to antibiotic resistance and public health threat. The research work tackles fundamental issues about the mechanisms of horizontal transfer of the SCC mec element. Moreover, it also addresses more general features of this mobile element, which could be of larger importance with regard to gene trafficking in staphylococci, and maybe other gram-positive bacteria. Finally, the dissertation sets the fundamentals for future work and possible new ways to interfere with the horizontal transfer of methicillin resistance.

Description of a new artificial diet for rearing ant colonies as Iridomyrmex humilis, Monomorium pharaonis and Wasmannia auropunctata (Hymenoptera, Formicidae)

A diet which does not desiccate was developed for rearing various ant species. this diet was found to be very attractive forIridomyrmex humilis. Monomorium pharaonis andWasmannia auropunctata in which species it permitted the rearing of colonies for long periods and the regular production of sexuals. Nous présentons la recette d'une nourriture artificielle élaborée pour élever des fourmis en laboratoire. Cette nourriture ne se dessèche pas et s'est avérée adéquate pour l'élevage de plusieur espèces telles queIridomyrmex humilis, Monomorium pharaonis etWasmannia auropunctata. Des sexués mâles et femelles ont été régulièrement produits dans ces sociétés.

Nanomotors: new strategies of (bio)sensing based on motion

Nanomotors are nanoscale devices capable of converting energy into movement and forces. Among them, self-propelled nanomotors offer considerable promise for developing new and novel bioanalytical and biosensing strategies based on the direct isolation of target biomolecules or changes in their movement in the presence of target analytes. The mainachievements of this project consists on the development of receptor-functionalized nanomotors that offer direct and rapid target detection, isolation and transport from raw biological samples without preparatory and washing steps. For example, microtube engines functionalized with aptamer, antibody, lectin and enzymes receptors were used for the direct isolation of analytes of biomedical interest, including proteins and whole cells, among others. A target protein was also isolated from a complex sample by using an antigen-functionalized microengine navigating into the reservoirs of a lab-on-a-chip device. The new nanomotorbased target biomarkers detection strategy not only offers highly sensitive, rapid, simple and low cost alternative for the isolation and transport of target molecules, but also represents a new dimension of analytical information based on motion. The recognition events can be easily visualized by optical microscope (without any sophisticated analytical instrument) to reveal the target presence and concentration. The use of artificial nanomachines has shown not only to be useful for (bio)recognition and (bio)transport but also for detection of environmental contamination and remediation. In this context, micromotors modified with superhydrophobic layer demonstrated that effectively interacted, captured, transported and removed oil droplets from oil contaminated samples. Finally, a unique micromotor-based strategy for water-quality testing, that mimics live-fish water-quality testing, based on changes in the propulsion behavior of artificial biocatalytic microswimmers in the presence of aquatic pollutants was also developed. The attractive features of the new micromachine-based target isolation and signal transduction protocols developed in this project offer numerous potential applications in biomedical diagnostics, environmental monitoring, and forensic analysis.

FtsZ-independent septal recruitment and function of cell wall remodelling enzymes in chlamydial pathogens.

The nature and assembly of the chlamydial division septum is poorly defined due to the paucity of a detectable peptidoglycan (PG)-based cell wall, the inhibition of constriction by penicillin and the presence of coding sequences for cell wall precursor and remodelling enzymes in the reduced chlamydial (pan-)genome. Here we show that the chlamydial amidase (AmiA) is active and remodels PG in Escherichia coli. Moreover, forward genetics using an E. coli amidase mutant as entry point reveals that the chlamydial LysM-domain protein NlpD is active in an E. coli reporter strain for PG endopeptidase activity (ΔnlpI). Immunolocalization unveils NlpD as the first septal (cell-wall-binding) protein in Chlamydiae and we show that its septal sequestration depends on prior cell wall synthesis. Since AmiA assembles into peripheral clusters, trimming of a PG-like polymer or precursors occurs throughout the chlamydial envelope, while NlpD targets PG-like peptide crosslinks at the chlamydial septum during constriction.

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

Entorn de programació pel robot Stäubli mitjantçant MatLab, aplicació a un sistema de recol·lecció de peces basat en visió artificial

Els objectius del projecte són: realitzar un intèrpret de comandes en VAL3 que rebi les ordres a través d’una connexió TCP/IP; realitzar una toolbox de Matlab per enviar diferents ordres mitjançant una connexió TCP/IP; adquirir i processar mitjançant Matlab imatges de la càmera en temps real i detectar la posició d’objectes artificials mitjançant la segmentació per color i dissenyar i realitzar una aplicació amb Matlab que reculli peces detectades amb la càmera. L’abast del projecte inclou: l’estudi del llenguatge de programació VAL3 i disseny de l’ intèrpret de comandes, l’estudi de les llibreries de Matlab per comunicació mitjançant TCP/IP, per l’adquisició d’imatges, pel processament d’imatges i per la programació en C; el disseny de la aplicació recol·lectora de peces i la implementació de: un intèrpret de comandes en VAL3, la toolbox pel control del robot STAUBLI en Matlab i la aplicació recol·lectora de peces mitjançant el processament d’imatges en temps real també en Matlab

Resfriamento artificial para o controle de Coleoptera em arroz armazenado em silo metálico

Resfriamento artificial para o controle de Coleoptera em arroz armazenado em silo metálico. O objetivo desta pesquisa foi avaliar o efeito do resfriamento artificial de grãos de arroz para o controle de coleópteros-praga. O ar frio foi insuflado pelo sistema de aeração em um silo metálico com arroz-em-casca. A avaliação do tratamento foi feita quinzenalmente usando armadilhas caladores. As espécies de Coleoptera capturadas foram: Oryzaephilus surinamensis (60%); Cryptolestes ferrugineus (9%); Rhyzopertha dominica (16,5%) e Sitophilus spp. (0,5%). Aos 28 dias, a temperatura média da massa de grãos era de 15ºC, e o número médio de insetos havia diminuído 76,8%. A aplicação de ar frio manteve as populações sob controle por aproximadamente 60 dias. Os resultados do monitoramento dos insetos e da temperatura indicaram que um novo ciclo de ar frio deveria ser aplicado nesse período para manter as populações sob controle. Também o manejo adequado da massa de grãos faz-se necessário para garantir resultados satisfatórios do resfriamento artificial.

Records of Anopheles (Nyssorhynchus) (Diptera, Culicidae) in artificial containers in Ribeirão Preto City, State of São Paulo, Brazil

Thirty immatures of Anopheles darlingi Root, Anopheles argyritarsis Robineau-Desvoidy and Anopheles rondoni (Neiva & Pinto) (were found in an artificial lagoon situated near Pardo River, in Ribeirão Preto City, State of São Paulo, Brazil. The presence of immatures of Anopheles darlingi breeding in a lagoon is suggestive of the potential capacity of that species to adapt and occupy new habitats and to invade urban areas along the species distribution range and also disperse to new localities.

Transthoracic adrenal biopsy procedure using artificial carbon dioxide pneumothorax as outpatient procedure.

Many routes have been described for percutaneous adrenal gland biopsy. They require either a complex non-axial path or a long hydrodissection or even pass through an organ thereby increasing complications. We describe here an approach using an artificially-induced carbon dioxide (CO2) pneumothorax, performed as an outpatient procedure in a 57-year-old woman. Under local anaesthesia, 200 ml of CO2 was injected in the pleural space through a Veress needle under computed tomography fluoroscopy, to clear the lung parenchyma from the biopsy route. Using this technique, transthoracic adrenal biopsy can be performed under simple local anaesthesia as an safely outpatient procedure.

Nymph developmental time and survivorship, adult longevity, reproduction and body weight of Dichelops melacanthus (Dallas) feeding on natural and artificial diets

The biology of nymphs and adults of the neotropical pentatomid, Dichelops melacanthus (Dallas), feeding on the natural foods, soybean, Glycine max (L.) Merrill immature pods, and corn, Zea mays L. immature seeds, and on an artificial dry diet, was studied in the laboratory. Nymph developmental time was shorter on the natural foods (ca. 21-22 days) than on the artificial diet (28 days), and most nymphs reached adulthood on the food plants (55% on soybean and 73% on corn) than on the artificial diet (40%). Fresh body weight at adult emergence was similar and higher for females raised as nymphs on the natural foods, compared to females from nymphs raised on the artificial diet; for males, weights were similar on all foods. Mean (female and male) survivorship up to day 20, decreased from 55% on soybean to 40% on corn, down to 0% on the artificial diet. Total longevity for females was higher on soybean, while for males was similar on all foods. About three times more females oviposited on soybean than on corn, but fecundity/female was similar on both foods. On the artificial diet, only one out of 30 females oviposited. Fresh body weight of adults increased significantly during the first week of adult life, and at the end of the 3rd week, weight gain was similar on all foods.

The adequacy of artificial oviposition substrates for laboratory rearing of Piezodorus guildinii (Westwood) (Heteroptera, Pentatomidae)

Studies in the laboratory tested the suitability of synthetic wool string, cotton string, cheesecloth, and commercial cotton ball as artificial oviposition substrates for the small green stink bug, Piezodorus guildinii (Westwood) (Heteroptera, Pentatomidae). In confined cages, 54% of total egg masses was laid on synthetic wool string, 31% on cotton string, and only 15% on cheesecloth. In an additional test, the best substrate selected, synthetic wool string, received 92% of egg masses compared to 8% on the commonly used substrate, cotton ball. Synthetic wool string received the most egg masses of any size, in particular those in the range 11-20 eggs/mass. Because the eggs of P. guildinii are laid in two parallel double rows, the egg masses fit the wool string perfectly.

Selection of artificial hosts for oviposition by wild Anastrepha obliqua (Macquart) (Diptera, Tephritidae): influence of adult food and effect of experience

Several factors influence the selection of oviposition substrates by insects. The aim of the present work was to find answers to the following questions related to the oviposition behavior of Anastrepha obliqua. Can carbohydrates (glucose or sucrose) present in the adult diet have influence on the female preference for an oviposition substrate with similar composition? Can the previous experience with a host containing one of mentioned carbohydrates interfere in further selection of oviposition substrates? The results showed that the kind of carbohydrate present in the adult diet did not affect the female preference for an artificial oviposition substrate, neither when it was presented by itself nor in combination with brewer's yeast. The effect of experience in the oviposition behavior was observed when there was a previous contact with artificial oviposition substrates containing yeast and sucrose. The data are discussed in terms of the behavioral plasticity presented by this species in relation to feeding and oviposition behaviors.

Tecnología del salado y secado artificial de la merluza (merluccius gayi peruanus)

Describe el desarrollo del proceso de salado y secado artificial de la merluza, como un método alternativo a la producción de filetes y bloques congelados, comprendiendo las experiencias comparativas de métodos de salado e igualmente las condiciones termodinámicas del aíre para el secado artificial, estudios de estabilidad de almacenamiento del producto experimental, calidad, rendimiento y aceptación por el consumidor. Además, se presenta sugerencias para las normas de procesamiento y calidad del producto.