Pasteurization of Apple Cider with UV Irradiation

In a period of increasing concern about food safety, food poisoning outbreaks where unpasterurized apple cider or apple juice was found contaminated with Escherichia coli 0157:H7 reinforces the need for using the best technologies in apple cider production. Most apple cider is sold as an unpasteurized raw product. Because of their acidity, it was believed that juice products do not usually contain microorganisms such as E. coli 0157:H7, Salmonella, and Crytosporidium. Yet all of these foodborne pathogens are capable of being transmitted in unpasteurized juices. It is known that these pathogens can survive for several weeks in a variety of acidic juices. Although heat pasteurization is probably the best method to eliminate these pathogens, it is not the most desirable method as it changes sensory properties and also is very costly for small to mid-sized apple cider processors. Pasteurization of apple cider with Ultraviolet Irradiation (UV) is a potential alternative to heat pasteurization. Germicidal W irradiation is effective in inactivating microorganisms without producing undesirable by-products and changing sensory properties. Unpasteurized raw apple cider from a small local processor was purchased for this study. The effects of physical parameters, exposure time and dosage on the W treatment efficacy were examined as well as the effects of the UV light on apple cider quality. W light with principal energy at a wavelength of 254.7 nm, was effective in reducing bacteria (E .coli, ATCC 25922) inoculated apple cider. The W dosage absorbed by the apple cider was mathematically calculated. A radiation dose of 8,777 μW-s/cm2 reduced bacteria an average of 2.20 logs and in multiple passes, the FDA mandated 5-log reduction was achieved. Sensory analysis showed there was no significant difference between the W treated and non-treated cider. Experiments with W treated apple cider indicated a significant (p < 0.01) extension of product shelf life through inhibition of yeast and mold growth. The extension of the researched performed is applicable to other fruit juice processing operations.

(Table 1) Cation exchange capacity and other characteristics of soils common in Lower Saxony, Germany

The chemical and biochemical processes associated with the filtration of rainwater through soils, a step in groundwater recharge, were investigated. Under simulated climatic conditions in the laboratory, undisturbed soil columns of partly loamy sands, sandy soils and loess were run as lysimeters. A series of extraction procedures was carried out to determine solid matter in unaltered rock materials and in soil horizons. Drainage water and moisture movement in the columns were analysed and traced respectively. The behaviour of soluble humic substance was investigated by percolation and suspension experiments. The development of seepage-water in the unsaturated zone is closely associated with the soil genetic processes. Determining autonomous chemical and physical parameters are mineral composition and grain size distribution in the original unconsolidated host rock and prevailing climatic conditions. They influence biological activity and transport of solids, dissolved matter and gases in the unsaturated zone. Humic substances, either as amorphous solid matter or as soluble humic acids play a part in diverse sorption, solution and precipitation processes.

Modelos digitales de elevación generados por captura directa e indirecta de datos fuente : evaluación de su calidad

La información básica sobre el relieve de una cuenca hidrográfica, mediante metodologías analítico-descriptivas, permite a quienes evalúan proyectos relacionados con el uso de los recursos naturales, tales como el manejo integrado de cuencas, estudios sobre impacto ambiental, degradación de suelos, deforestación, conservación de los recursos hídricos, entre otros, contar para su análisis con los parámetros físicos necesarios. Estos procesos mencionados tienen un fuerte componente espacial y el empleo de Sistemas de Información Geográfica (SIG) son de suma utilidad, siendo los Modelos Digitales de Elevación (DEM) y sus derivados un componente relevante de esta base de datos. Los productos derivados de estos modelos, como pendiente, orientación o curvatura, resultarán tan precisos como el DEM usado para derivarlos. Por otra parte, es fundamental maximizar la habilidad del modelo para representar las variaciones del terreno; para ello se debe seleccionar una adecuada resolución (grilla) de acuerdo con los datos disponibles para su generación. En este trabajo se evalúa la calidad altimétrica de seis DEMs generados a partir de dos sistemas diferentes de captura de datos fuente y de distintas resoluciones de grilla. Para determinar la exactitud de los DEMs habitualmente se utiliza un grupo de puntos de control considerados como "verdad de campo" que se comparan con los generados por el modelo en la misma posición geográfica. El área seleccionada para realizar el estudio está ubicada en la localidad de Arrecifes, provincia de Buenos Aires (Argentina) y tiene una superficie de aproximadamente 120 ha. Los resultados obtenidos para los dos algoritmos y para los tres tamaños de grilla analizados presentaron los siguientes resultados: el algoritmo DEM from contourn, un RMSE (Root Mean Squared Error) de ± 0,11 m (para grilla de 1 m), ± 0,11 m (para grilla de 5 m) y de ± 0,15 m (para grilla de 10 m). Para el algoritmo DEM from vector/points, un RMSE de ± 0,09 m (para grilla de 1 m), ± 0,11 m (para grilla de 5 m) y de ± 0,11 m (para grilla de 10 m). Los resultados permiten concluir que el DEM generado a partir de puntos acotados del terreno como datos fuente y con el menor tamaño de grilla es el único que satisface los valores enumerados en la bibliografía, tanto nacional como internacional, lo que lo hace apto para proyectos relacionados con recursos naturales a nivel de ecotopo (predial). El resto de los DEMs generados presentan un RMSE que permite asegurar su aptitud para la evaluación de proyectos relacionados con el uso de los recursos naturales a nivel de unidad de paisaje (conjunto de ecotopos).

Determinación de la precisión de DEMs generados con puntos digitalizados a partir de cartografía existente : relación con el algoritmo utilizado

La información básica sobre el relieve de cuencas hidrográficas, mediante metodologías analítico-descriptivas permite contar con los parámetros físicos necesarios para el estudio de los recursos naturales tales como manejo integrado de cuencas, impacto ambiental, degradación de suelos, deforestación, conservación de los recursos hídricos, entre otros. Todos estos procesos ligados a una fuerte componente espacial permiten el uso de sistemas de información geográfica. Los Modelos Digitales de Elevación (DEM) y sus derivados son un componente relevante de estas fuentes de datos. En este trabajo se planteó evaluar los DEMs, generados por captura indirecta de datos fuente, (puntos digitalizados sobre un plano, en formato papel, con curvas de nivel) para determinar si su calidad altimétrica varía con la resolución espacial del mismo (tamaño de grilla). Asimismo se evaluó la posible existencia de alguna interacción entre el software utilizado y los tamaños de grilla, que podría influir sobre la calidad altimétrica del DEM. Se concluyó que la resolución espacial afecta la calidad altimétrica del DEM. Se constató, asimismo, que es posible encontrar un tamaño de grilla ideal en cuanto a calidad altimétrica y peso informático del modelo digital de elevaciones generado. Respecto de la existencia de una interacción entre el tamaño de grilla y el software, que pudieran afectar la calidad de los modelos obtenidos en función de la metodología de adquisición de datos fuente, se demostró que existe esta posibilidad cuando la base de datos se genera a partir de puntos digitalizados.

The C37 alkenone record of sea water of time series station DYNAPROC

The concentrations of suspended particulate pigments, C37-C38 alkenones, total organic carbon and nitrogen in the Ligurian Sea (northwestern Mediterranean) have been studied at 5 and 30 m depth during well defined thermocline conditions. An accurate description of the short term changes of these compounds has been achieved by means of four 36-h sampling cycles each encompassing consecutive filtration periods of 4 h. During sampling the thermocline changes were followed closely by simultaneous measurements of water column temperature, salinity and other physical parameters. The analysis of the collected samples indicates that the Haptophyte pigments and alkenones are essentially synthesized at the levels of highest primary production and therefore the C37 alkenone record reflects the seawater temperature at this depth level. The study also shows that part of these alkenones are distributed throughout the water column in association to the suspended particles. This process results in C37 alkenone distributions that, due to their high resistance to chemical and microbial degradation, record the temperature of the highest primary productivity layers even at shallow (e.g., 5 m depth) or deep (e.g., 1100 m depth) waters.

Granulometry, biogenic silica content, magnetic susceptibility and bulk densities of ODP Site 188-1165

The Prydz Bay area is a key region for studying and understanding the history of the eastern Antarctic Continental Ice Sheet (O'Brien, Cooper, Richter, et al., 2001, doi:10.2973/odp.proc.ir.188.2001). Ocean Drilling Program (ODP) Site 1165 is situated in a water depth of 3357 m on the continental rise offshore from Prydz Bay and lies in front of the outlet for the Lambert Glacier-Amery Ice Shelf system that today drains 22% of East Antarctica. The site was drilled into mixed pelagic and hemipelagic sediments from the southwestern side of the Wild Drift. The drift is an elongate sediment body formed by the interaction of sediment supplied from continental shelf and slope with westward-flowing bottom currents. The sedimentary sequence is characterized by alternations between a generally gray to dark gray facies and a green to greenish gray facies. The greenish facies are structureless diatom-bearing clays with common bioturbation and larger amounts (>15%-20%) of biogenic silica, dispersed clasts, and lonestones than the dark gray facies, which are mostly less bioturbated clay with some silt laminations (Shipboard Scientific Party, 2001, doi:10.2973/odp.proc.ir.188.103.2001). High-quality advanced piston corer and extended core barrel cores containing nearly complete sections of middle Miocene to early Pliocene age allow a detailed characterization of sedimentary cycles and can provide indications for ice advances of the Lambert Glacier system into Prydz Bay, for the extent of sea ice, and for changes in oceanic circulation. The purpose of this work is to provide a data set of coarse-fraction mass percentage (>63, >125, and >250 µm) and biogenic silica content measured on sediments of late Miocene to early Pliocene age drilled at Site 1165. Additionally, high-resolution records of magnetic susceptibility (MS) and gamma ray attenuation (GRA) bulk density are presented. These shipboard data sets were edited postcruise. Furthermore, I provide a high-resolution dry bulk density record that is derived from GRA bulk density and can be used for the calculation of mass accumulation rates. These sedimentological and physical parameters will be used in future work to understand the depositional pattern of alternating biogenic and terrigenous sediments that was observed at Site 1165 (Shipboard Scientific Party, 2001, doi:10.2973/odp.proc.ir.188.103.2001).

Digital surface model, hillshade and Lambertian reflectance model of the rock glaciers Oelgrube and Aeusseres Hochebenkar (Oetztal Alps, Tyrol, Austria)

With full-waveform (FWF) lidar systems becoming increasingly available from different commercial manufacturers, the possibility for extracting physical parameters of the scanned surfaces in an area-wide sense, as addendum to their geometric representation, has risen as well. The mentioned FWF systems digitize the temporal profiles of the transmitted laser pulse and of its backscattered echoes, allowing for a reliable determination of the target distance to the instrument and of physical target quantities by means of radiometric calibration, one of such quantities being the diffuse Lambertian reflectance. The delineation of glaciers is a time-consuming task, commonly performed manually by experts and involving field trips as well as image interpretation of orthophotos, digital terrain models and shaded reliefs. In this study, the diffuse Lambertian reflectance was compared to the glacier outlines mapped by experts. We start the presentation with the workflow for analysis of FWF data, their direct georeferencing and the calculation of the diffuse Lambertian reflectance by radiometric calibration; this workflow is illustrated for a large FWF lidar campaign in the Ötztal Alps (Tyrol, Austria), operated with an Optech ALTM 3100 system. The geometric performance of the presented procedure was evaluated by means of a relative and an absolute accuracy assessment using strip differences and orthophotos, resp. The diffuse Lambertian reflectance was evaluated at two rock glaciers within the mentioned lidar campaign. This feature showed good performance for the delineation of the rock glacier boundaries, especially at their lower parts.

Compilation of measurements from two interdisciplinary STAR-shaped surveys in the North Sea: The ZISCH - Dataset

The measurements were obtained during two North Sea wide STAR-shaped cruises during summer 1986 and winter 1987, which were performed to investigate the circulation induced transport and biologically induced pollutant transfer within the interdisciplinary research in the project "ZISCH - Zirkulation und Schadstoffumsatz in der Nordsee / Circulation and Contaminant Fluxes in the North Sea (1984-1989)". The inventory presents parameters measured on hydrodynamics, nutrient dynamics, ecosystem dynamics and pollutant dynamics in the pelagic and benthic realm. The research program had the objective of quantifying fluxes of major budgets, especially contaminants in the North Sea. In spring 1986, following the phytoplankton spring bloom, and in late winter 1987, at minimum primary production activity, the North Sea ecosystem was investigated on a station net covering the whole North Sea. The station net was shaped like a star. Sampling started in the centre, followed by the northwest section and moving counter clockwise around the North Sea following the residual currents. By this strategy, a time series was measured in the central North Sea and more synoptic data sets were obtained in the individual sections. Generally advection processes have to be considered when comparing the data from different stations. The entire sampling period lasted for more than six weeks in each cruise. Thus, a time-lag should be considered especially when comparing the data from the eastern and the western part of the central and northern North Sea, where samples were taken at the beginning and at the end of the campaign. The ZISCH investigations represented a qualitatively and quantitatively new approach to North Sea research in several respects. (1) The first simultaneous blanket coverage of all important biological, chemical and physical parameters in the entire North Sea ecosystem; (2) the first simultaneous measurements of major contaminants (metals and organohaline compounds) in the different ecosystem compartments; (3) simultaneous determinations of atmospheric inputs of momentum, energy and matter as important ecosystem boundary conditions; (4) performance of the complex measurement program during two seasons, namely the spring plankton bloom and the subsequent winter period of minimal biological activity; and (5) support of data analysis and interpretation by oceanographic and meteorological numerical models on the same scales.

Spatiotemporal monitoring of water quality in coral reefs of Tayrona National Natural Park, Colombian Caribbean, 2011-2013

Tayrona National Natural Park (TNNP; 11°17' - 11°22' N and 73°53' - 74°12' W) is a hotspot of coral reef biodiversity in the Colombian Caribbean, located between the city of Santa Marta (>455,000 inhabitants) and several smaller river mouths (Rio Piedras, Mendihuaca, Guachaca). The region experiences a strong seasonal variation in physical parameters (temperature, salinity, wind, and water currents) due to alternating dry seasons with coastal upwelling and rainy seasons. Here, a range of water quality parameters relevant for coral reef functioning is provided. Water quality was measured directly above local coral reefs (~10 m water depth) by a monthly monitoring for up to 25 months in the four TNNP bays (Chengue, Gayraca, Neguanje, and Cinto) and at sites with different degree of exposition to winds, waves and water currents (exposed vs. sheltered sites) within each bay. The water quality parameters include: inorganic nutrient (nitrate, nitrite and soluble reactive phosphorus), chlorophyll a, particulate organic carbon and nitrogen concentrations (with a replication of n=3) as well as oxygen availability, biological oxygen demand, seawater pH, and water clarity (with a replication of n=4). This is by far the most comprehensive coral reefs water quality dataset for the region. A detailed description of the methods can be found within the referenced publications.