Gerenciamento de resíduos químicos e águas servidas no laboratório de isótopos estáveis do CENA/USP

A system for disposal and recovery of the main effluents and chemical waist from isotope separation plants and enriched compounds-15N and 34S production has been carried out at the Stable Isotope Laboratory (LIE) of the CENA/USP. Around four hundred thousand liters of effluents has been recovered yearly. Among the recovered chemical wastes, the more relevant are: ammonia; brome; ammonium and sodium sulfate; sodium hydroxide; sulfur dioxide; and hydrochloric acid. Chemical wastes containg recoverable heavy metals (Ag, Cr and Cu) and solvents (methanol, ethanol and acetone) are processed and recovered. Gaseous emissions, mainly H2S are used for recovery of heavy metals solutions. The minimization of the residues waters, as well the reduction of electric energy consume was established using a water deionization system. A cost/effect balance of the process is reported.

Image Segmentation Using Information Bottleneck Method

In image processing, segmentation algorithms constitute one of the main focuses of research. In this paper, new image segmentation algorithms based on a hard version of the information bottleneck method are presented. The objective of this method is to extract a compact representation of a variable, considered the input, with minimal loss of mutual information with respect to another variable, considered the output. First, we introduce a split-and-merge algorithm based on the definition of an information channel between a set of regions (input) of the image and the intensity histogram bins (output). From this channel, the maximization of the mutual information gain is used to optimize the image partitioning. Then, the merging process of the regions obtained in the previous phase is carried out by minimizing the loss of mutual information. From the inversion of the above channel, we also present a new histogram clustering algorithm based on the minimization of the mutual information loss, where now the input variable represents the histogram bins and the output is given by the set of regions obtained from the above split-and-merge algorithm. Finally, we introduce two new clustering algorithms which show how the information bottleneck method can be applied to the registration channel obtained when two multimodal images are correctly aligned. Different experiments on 2-D and 3-D images show the behavior of the proposed algorithms

Feedback-related Brain Potential Activity Complies with Basic Assumptions of Associative Learning Theory

Feedback-related negativity (FRN) is an ERP component that distinguishes positive from negative feedback. FRN has been hypothesized to be the product of an error signal that may be used to adjust future behavior. In addition, associative learning models assume that the trial-to-trial learning of cueoutcome mappings involves the minimization of an error term. This study evaluated whether FRN is a possible electrophysiological correlate of this error term in a predictive learning task where human subjects were asked to learn different cueoutcome relationships. Specifically, we evaluated the sensitivity of the FRN to the course of learning when different stimuli interact or compete to become a predictor of certain outcomes. Importantly, some of these cues were blocked by more informative or predictive cues (i.e., the blocking effect). Interestingly, the present results show that both learning and blocking affect the amplitude of the FRN component. Furthermore, independent analyses of positive and negative feedback event-related signals showed that the learning effect was restricted to the ERP component elicited by positive feedback. The blocking test showed differences in the FRN magnitude between a predictive and a blocked cue. Overall, the present results show that ERPs that are related to feedback processing correspond to the main predictions of associative learning models. ■

Implantació d'un sistema de gestió integrada: ISO 9001:00, ISO 14001:04 i OHSAS 18001:07, en un centre d'estètica i perruqueria

En aquests últims anys, són moltes les empreses que han optat per la utilització de sistemes de gestió normalitzats, per a garantir la rendibilitat i fiabilitat dels resultats de la implantació del sistema de gestió en qüestió. A la dècada dels 90 va ser quan la implantació de sistemes de gestió va començar a ser important en la majoria de sectors econòmics. L’evolució en els sistemes de gestió a trets generals va iniciar-se primerament en l’àmbit de la qualitat, seguidament en la gestió ambiental i en última instància en la prevenció de riscos laborals. Aquests tres tipus de sistemes de gestió, en els últims anys s’han anat integrant, de manera que s’han reduït els recursos i els esforços emprats en la gestió, millorant significativament l’eficàcia i l’eficiència d’aquests sistemes. L’objectiu principal que persegueix aquest projecte, és definir un sistema de gestió que permeti a l’empresa conduir les seves activitats de forma simplificada i ordenada, i que alhora faciliti la informació necessària per a corregir i millorar les activitats. Un altre objectiu que pretén aconseguir aquest projecte, és el de dissenyar un SGI que aprofiti les sinèrgies generades en els diferents àmbits de la pròpia empresa i fomenti les interaccions entre els diferents nivells de l’organització. En conseqüència, millorarà de forma important els fluxos d’informació dins de l’empresa minimitzant els esforços i la pèrdua d’informació. El mètode escollit per a la implantació del SGI, ha estat la Gestió per Processos, la qual es basa en la definició i seguiment dels processos de l’empresa, partint de les necessitats del client i acabant quan aquestes estan satisfetes. En conclusió, a la finalització del present projecte s’obtindrà un SGI, amb tots els processos de l’empresa definits i implantats, que doni compliment a les normes UNEEN-ISO 9001:00, UNE-EN-ISO 14001:04 i OHSAS 18001:07. Aquest SGI, que s’ha realitzat des d’un punt de vista documental i teòric, suposarà una millora de l’eficàcia operativa dels processos i una important millora competitiva de l’empresa.

Caracterização físico-química de queijo prato por espectroscopia no infravermelho e regressão de mínimos quadrados parciais

In this work an analytical methodology for the determination of relevant physicochemical parameters of prato cheese is reported, using infrared spectroscopy (DRIFT) and partial least squares regression (PLS). Several multivariate models were developed, using different spectral regions and preprocessing routines. In general, good precision and accuracy was observed for all studied parameters (fat, protein, moisture, total solids, ashes and pH) with standard deviations comparable with those provided by the conventional methodologies. The implantation of this multivariate routine involves significant analytical advantages, including reduction of cost and time of analysis, minimization of human errors, and elimination of chemical residues.

Aumento da resposta analítica por meio da otimização do sistema de injeção sem divisão de fluxo em cromatografia gasosa empregando a lei dos gases ideais

This paper reports the development of an easy, fast and effective procedure for the verification of the ideal gas law in splitless injection systems in order to improve the response. Results of a group of pesticides were used to demonstrate the suitability of the approach. The procedure helps establish experimental parameters through theoretical aspects. The improved instrumental response allowed extraction with lower sample volumes, the minimization of time and costs and the simplification of sample preparation.

Principais técnicas de preparo de amostra para a determinação de resíduos de agrotóxicos em água por cromatografia líquida com detecção por arranjo de diodos e por espectrometria de massas

The determination of pesticide residues in water samples by Liquid Chromatography require sample preparation for extraction and enrichment of the analytes with the minimization of interferences to achieve adequate detection limits. The Solid Phase Extraction (SPE), Solid Phase Microextraction (SPME), Stir Bar Sorptive Extraction (SBSE) and Dispersive Liquid-Liquid Microextraction (DLLME) techniques have been widely used for extraction of pesticides in water. In this review, the principles of these sample preparation techniques associated with the analysis by Liquid Chromatography with Diode Array Detection (LC-DAD) or Mass Spectrometry (LC-MS) are described and an overview of several applications were presented and discussed.

Un método para enseñar el porqué suceden las reacciones químicas

A methodology is proposed for explaining one of the central questions in the teaching of general chemistry courses to freshman students: why do chemical transformations occur? The answer to this question is based on thermodynamics but we propose arriving at an answer in a more intuitive way by using computational tools in a bid to increase the motivation of students for learning chemistry.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Hitsauksen aiheuttamat muodonmuutokset ja niiden hallinta alumiiniveneiden rakenteissa

Alumiiniveneissä hitsauksen aiheuttamat muodonmuutokset ovat usein erittäin haitallisia, koska niiden aiheuttamat mittamuutokset ja ulkonäölliset haitat alentavat tuotteen laatua sekä arvoa. Monissa tapauksissa myös hitsausliitoksen suorituskyky heikentyy ja lisäksi hitsausmuodonmuutokset voivat aiheuttaa toiminnallisia ongelmia alumiiniveneiden runkorakenteisiin. Tästä johtuen hitsausmuodonmuutosten hallinta ja minimointi ovat erityisen tärkeitä tekijöitä pyrittäessä parantamaan alumiiniveneiden laatua ja kustannustehokkuutta sekä kasvattamaan alumiinivenealan kilpailukykyä. Tässä diplomityössä tutkittiin robotisoidun kaasukaarihitsauksen aiheuttamia muodonmuutoksia sekä niiden hallintaa alumiinista valmistettujen työ- ja huviveneiden runkorakenteissa. Työssä perehdyttiin nykyaikaiseen alumiinivenevalmistukseen sekä hitsattujen rakenteiden yleisiin lujuusopin teorioihin ja käyttäytymismalleihin. Alumiinin hitsausmuodonmuutosten tutkimuksissa suoritettiin käytännön hitsauskokeita, joiden kohteina olivat alumiiniveneissä käytetyt rakenneratkaisut ja liitostyypit. Työn tavoitteena oli määrittää alumiinin hitsauksessa syntyviin muodonmuutoksiin keskeisesti vaikuttavia tekijöitä ja parametreja. Tutkimustulosten perusteella pyrittiin esittämään ratkaisuja alumiiniveneiden rakenteisiin aiheutuvien hitsausmuodonmuutosten vähentämiseksi ja hallitsemiseksi. Alumiinirakenteissa hitsausmuodonmuutokset ovat hyvin tapauskohtaisia, koska usein niiden syntyminen määräytyy monen tekijän yhteisvaikutuksesta. Teräsrakenteille käytetyt yleiset analyyttiset laskentakaavat ja käyttäytymismallit eivät sovellu suoraan alumiinirakenteille, mikä johtuu alumiinin erilaisista materiaaliominaisuuksista ja käyttäytymisestä hitsauksen aikana. Tulevaisuudessa empiiristen koejärjestelyiden ja analyyttisten mallien lisäksi sovellettavan numeerisen elementtimenetelmän avulla voidaan parantaa alumiinin hitsauksessa aiheutuvien muodonmuutosten kokonaisvaltaista hallintaa.

MCMC Analysis for Optimization of Stochastic Models

In any decision making under uncertainties, the goal is mostly to minimize the expected cost. The minimization of cost under uncertainties is usually done by optimization. For simple models, the optimization can easily be done using deterministic methods.However, many models practically contain some complex and varying parameters that can not easily be taken into account using usual deterministic methods of optimization. Thus, it is very important to look for other methods that can be used to get insight into such models. MCMC method is one of the practical methods that can be used for optimization of stochastic models under uncertainty. This method is based on simulation that provides a general methodology which can be applied in nonlinear and non-Gaussian state models. MCMC method is very important for practical applications because it is a uni ed estimation procedure which simultaneously estimates both parameters and state variables. MCMC computes the distribution of the state variables and parameters of the given data measurements. MCMC method is faster in terms of computing time when compared to other optimization methods. This thesis discusses the use of Markov chain Monte Carlo (MCMC) methods for optimization of Stochastic models under uncertainties .The thesis begins with a short discussion about Bayesian Inference, MCMC and Stochastic optimization methods. Then an example is given of how MCMC can be applied for maximizing production at a minimum cost in a chemical reaction process. It is observed that this method performs better in optimizing the given cost function with a very high certainty.

Computational modeling for irrigated agriculture planning. Part II: risk analysis

Techniques of evaluation of risks coming from inherent uncertainties to the agricultural activity should accompany planning studies. The risk analysis should be carried out by risk simulation using techniques as the Monte Carlo method. This study was carried out to develop a computer program so-called P-RISCO for the application of risky simulations on linear programming models, to apply to a case study, as well to test the results comparatively to the @RISK program. In the risk analysis it was observed that the average of the output variable total net present value, U, was considerably lower than the maximum U value obtained from the linear programming model. It was also verified that the enterprise will be front to expressive risk of shortage of water in the month of April, what doesn't happen for the cropping pattern obtained by the minimization of the irrigation requirement in the months of April in the four years. The scenario analysis indicated that the sale price of the passion fruit crop exercises expressive influence on the financial performance of the enterprise. In the comparative analysis it was verified the equivalence of P-RISCO and @RISK programs in the execution of the risk simulation for the considered scenario.

Development of capacitive sensor for measuring soil water content

The irrigation management based on the monitoring of the soil water content allows for the minimization of the amount of water applied, making its use more efficient. Taking into account these aspects, in this work, a sensor for measuring the soil water content was developed to allow real time automation of irrigation systems. This way, problems affecting crop yielding such as irregularities in the time to turn on or turn off the pump, and excess or deficit of water can be solved. To develop the sensors were used stainless steel rods, resin, and insulating varnish. The sensors measuring circuit was based on a microcontroller, which gives its output signal in the digital format. The sensors were calibrated using soil of the type “Quartzarenic Neosoil”. A third order polynomial model was fitted to the experimental data between the values of water content corresponding to the field capacity and the wilting point to correlate the soil water content obtained by the oven standard method with those measured by the electronic circuit, with a coefficient of determination of 93.17%, and an accuracy in the measures of ±0.010 kg kg-1. Based on the results, it was concluded that the sensor and its implemented measuring circuit can be used in the automation process of irrigation systems.

Tietoliikennekustannusten optimointi reaaliaikaisessa paikkatietojärjestelmässä

Tässä diplomityössä kehitettiin paikkatietojärjestelmä, joka mahdollistaa ajoneuvojen seurannan ja aikatauluennusteiden tuottamisen reaaliaikaisesti joukkoliikenteen informaatiojärjestelmien tarpeisiin. Tavoitteena oli toteuttaa vastaavan jo käytössä olleen järjestelmän toiminnallisuudet sillä tavoin tehokkaammin, että saataisiin merkittävästi pienennettyä tiedonsiirrossa käytettyä datamäärää ja järjestelmän käytöstä aiheutuvia kustannuksia. Työssä tutkittiin tiedonsiirtoprotokollakerrosten ja protokollasuunnitteluun liittyvien ratkaisujen, kuten viestien yhdistelyn, tietotyyppien valinnan sekä yhteyksien uudelleenkäytön, vaikutusta tarvittavaan tiedonsiirtomäärään. Lopputuloksena vanhoja vastaavien toimintojen vaatima datamäärä saatiin huonoimmassakin tilanteessa puoleen entisestä. Lisäksi niiden logiikan uudistamisen todettiin saavan aikaan tätäkin suuremmat säästöt. Esiin nousikin erityisesti juuri sovelluslogiikan merkitys. Suurimmalta osin sen perusteella määräytyy, kuinka paljon viestintää järjestelmässä tarvitaan. Näin ollen sillä on myös hyvin suuri vaikutus siihen, mikä tietoliikenteen kokonaismäärä lopulta on.

Active inverter output filtering methods

Frequency converters are widely used in the industry to enable better controllability and efficiency of variable speed AC motor drives. Despite these advantages, certain challenges concerning the inverter and motor interfacing have been present for decades. As insulated gate bipolar transistors entered the market, the inverter output voltage transition rate significantly increased compared with their predecessors. Inverters operate based on pulse width modulation of the output voltage, and the steep voltage edge fed by the inverter produces a motor terminal overvoltage. The overvoltage causes extra stress to the motor insulation, which may lead to a prematuremotor failure. The overvoltage is not generated by the inverter alone, but also by the sum effect of the motor cable length and the impedance mismatch between the cable and the motor. Many solutions have been shown to limit the overvoltage, and the mainstream products focus on passive filters. This doctoral thesis studies an alternative methodology for motor overvoltage reduction. The focus is on minimization of the passive filter dimensions, physical and electrical, or better yet, on operation without any filter. This is achieved by additional inverter control and modulation. The studied methods are implemented on different inverter topologies, varying in nominal voltage and current.For two-level inverters, the studied method is termed active du/dt. It consists of a small output LC filter, which is controlled by an independent modulator. The overvoltage is limited by a reduced voltage transition rate. For multilevel inverters, an overvoltage mitigation method operating without a passive filter, called edge modulation, is implemented. The method uses the capability of the inverter to produce two switching operations in the same direction to cancel the oscillating voltages of opposite phases. For parallel inverters, two methods are studied. They are both intended for two-level inverters, but the first uses individual motor cables from each inverter while the other topology applies output inductors. The overvoltage is reduced by interleaving the switching operations to produce a similar oscillation accumulation as with the edge modulation. The implementation of these methods is discussed in detail, and the necessary modifications to the control system of the inverter are presented. Each method is experimentally verified by operating industrial frequency converters with the modified control. All the methods are found feasible, and they provide sufficient overvoltage protection. The limitations and challenges brought about by the methods are discussed.