Seabed Biodiversity on the Continental Shelf of the Great Barrier Reef World Heritage Area

The Great Barrier Reef is a unique World Heritage Area of national and international significance. As a multiple use Marine Park, activities such as fishing and tourism occur along with conservation goals. Managers need information on habitats and biodiversity distribution and risks to ensure these activities are conducted sustainably. However, while the coral reefs have been relatively well studied, less was known about the deeper seabed in the region. From 2003 to 2006, the GBR Seabed Biodiversity Project has mapped habitats and their associated biodiversity across the length and breadth of the Marine Park to provide information that will help managers with conservation planning and to assess whether fisheries are ecologically sustainable, as required by environmental protection legislation (e.g. EPBC Act 1999). Holistic information on the biodiversity of the seabed was acquired by visiting almost 1,500 sites, representing a full range of known environments, during 10 month-long voyages on two vessels and deploying several types of devices such as: towed video and digital cameras, baited remote underwater video stations (BRUVS), a digital echo-sounder, an epibenthic sled and a research trawl to collect samples for more detailed data about plants, invertebrates and fishes on the seabed. Data were collected and processed from >600 km of towed video and almost 100,000 photos, 1150 BRUVS videos, ~140 GB of digital echograms, and from sorting and identification of ~14,000 benthic samples, ~4,000 seabed fish samples, and ~1,200 sediment samples.

Overcoming the challenges of building heritage projects: Improvements to time, scope and cost performance

This research was undertaken to encompass and identify challenges and impact factors that affect the successful outcomes of heritage building projects, especially those related to finding major causes of delays and cost overruns across projects in all Australian states. This project determined and analysed the causes of such delays and programme issues emanating from the planning and execution phases, whilst also analysing the requirements for management of multiple stakeholder relationships and the influence of unforeseen technical factors. The research proposes "call for action" guidance and was validated by experienced experts in heritage building projects in Australia. The proposed guidance is designed to ensure that realistic cost targets and delivery timeframes are set in future heritage projects, and necessary interventions made at appropriate project stages to ensure decisions are made that will help to prevent overtime and cost overuns.

Benno Strauss and Magdalena Strauss walking down a busy street with Nazi swastika banner flags hanging from the buildings.

Parents of Herbert Strauss

Energy and rural buildings in India

This paper attempts to evaluate the energy inputs needed to produce rural buildings. Based on a survey, a comparison is carried out of traditional and innovative technologies with reference to their energy consumption. Some basic data regarding energies in transportation are also presented. The implications of this analysis for development objectives is discussed.

Interactions between a Trawl fishery and spatial closures for biodiversity conservation in the Great Barrier Reef World Heritage Area, Australia.

Background: The Queensland East Coast Otter Trawl Fishery (ECOTF) for penaeid shrimp fishes within Australia's Great Barrier Reef World Heritage Area (GBRWHA). The past decade has seen the implementation of conservation and fisheries management strategies to reduce the impact of the ECOTF on the seabed and improve biodiversity conservation. New information from electronic vessel location monitoring systems (VMS) provides an opportunity to review the interactions between the ECOTF and spatial closures for biodiversity conservation. Methodology and Results: We used fishing metrics and spatial information on the distribution of closures and modelled VMS data in a geographical information system (GIS) to assess change in effort of the trawl fishery from 2001-2009 and to quantify the exposure of 70 reef, non-reef and deep water bioregions to trawl fishing. The number of trawlers and the number of days fished almost halved between 2001 and 2009 and new spatial closures introduced in 2004 reduced the area zoned available for trawl fishing by 33%. However, we found that there was only a relatively minor change in the spatial footprint of the fishery as a result of new spatial closures. Non-reef bioregions benefited the most from new spatial closures followed by deep and reef bioregions. Conclusions/Significance: Although the catch of non target species remains an issue of concern for fisheries management, the small spatial footprint of the ECOTF relative to the size of the GBRWHA means that the impact on benthic habitats is likely to be negligible. The decline in effort as a result of fishing industry structural adjustment, increasing variable costs and business decisions of fishers is likely to continue a trend to fish only in the most productive areas. This will provide protection for most benthic habitats without any further legislative or management intervention.

Construction timbers in Queensland. Book 1 and Book 2: Properties and specifications for satisfactory performance of construction timbers in Queensland. Class 1 and Class 10 buildings (houses, carports, garages, greenhouses and sheds). 2013 edition.

This publication lists the more important wood properties of commercial timbers used for construction in Queensland. It also provides requirements and conditions of use for these timbers to provide appropriate design service life in various construction applications. The correct specification of timber considers a range of timber properties including, but not limited to, stress grade; durability class; moisture content and insect resistance. For the specification of timber sizes and spans, relevant Australian Standards and design manuals should be consulted—e.g. Australian Standard AS 1684 series Residential timber—framed construction parts 2 and 3 (Standards Australia 2006a;b.) Book 1 explains the terms used; with reference to nomenclature; origin and timber properties presented under specific column headings in the schedules (Book 2). It also explains target design life; applications and decay hazard zones; presented in the Book 2 Schedules. Book 2 consists of reference tables; presented as schedules A; B and C: • Schedule A contains commercial mixtures of unidentified timbers and of some Australian and imported softwoods. Index numbers 1–10 • Schedule B contains Australian-grown timber species; including both natural forests and plantations. Index numbers 11–493 • Schedule C contains timbers imported into Australia from overseas. Index numbers 494–606 Each schedule has two parts presenting data in tables. • Part 1: Nomenclature, origin and properties of imported timber species • Part 2: Approved uses for commercial mixtures of imported timber species The recommendations made in this publication assume that good building practice will be carried out.

Evoking poetics of memory through performing site: Naik Naik, a Malaysian Australian collaboration in the world heritage setting of Melaka

Memory, time and metaphor are central triggers for artists in exploring and shaping their creative work. This paper examines the place of artists as ‘memory-keepers’, and ‘memory-makers’, in particular through engagement with the time-based art of site-specific performance. Naik Naik (Ascent) was a multi-site performance project in the historic setting of Melaka, Malaysia, and is partially recaptured through the presence and voices of its collaborating artists. Distilled from moments recalled, this paper seeks to uncover the poetics of memory to emerge from the project; one steeped in metaphor rather than narrative. It elicits some of the complex and interdependent layers of experience revealed by the artists in Naik Naik; cultural, ancestral, historical, personal, instinctual and embodied memories connected to sound, smell, touch, sensation and light, in a spatiotemporal context for which site is the catalyst. The liminal nature of memory at the heart of Naik Naik, provides a shared experience of past and present and future, performatively interwoven.

Microclimate and gas emissions in dairy buildings : Instrumentation, theory and measurements

The aim of this thesis was to develop measurement techniques and systems for measuring air quality and to provide information about air quality conditions and the amount of gaseous emissions from semi-insulated and uninsulated dairy buildings in Finland and Estonia. Specialization and intensification in livestock farming, such as in dairy production, is usually accompanied by an increase in concentrated environmental emissions. In addition to high moisture, the presence of dust and corrosive gases, and widely varying gas concentrations in dairy buildings, Finland and Estonia experience winter temperatures reaching below -40 ºC and summer temperatures above +30 ºC. The adaptation of new technologies for long-term air quality monitoring and measurement remains relatively uncommon in dairy buildings because the construction and maintenance of accurate monitoring systems for long-term use are too expensive for the average dairy farmer to afford. Though the documentation of accurate air quality measurement systems intended mainly for research purposes have been made in the past, standardised methods and the documentation of affordable systems and simple methods for performing air quality and emissions measurements in dairy buildings are unavailable. In this study, we built three measurement systems: 1) a Stationary system with integrated affordable sensors for on-site measurements, 2) a Wireless system with affordable sensors for off-site measurements, and 3) a Mobile system consisting of expensive and accurate sensors for measuring air quality. In addition to assessing existing methods, we developed simplified methods for measuring ventilation and emission rates in dairy buildings. The three measurement systems were successfully used to measure air quality in uninsulated, semi-insulated, and fully-insulated dairy buildings between the years 2005 and 2007. When carefully calibrated, the affordable sensors in the systems gave reasonably accurate readings. The spatial air quality survey showed high variation in microclimate conditions in the dairy buildings measured. The average indoor air concentration for carbon dioxide was 950 ppm, for ammonia 5 ppm, for methane 48 ppm, for relative humidity 70%, and for inside air velocity 0.2 m/s. The average winter and summer indoor temperatures during the measurement period were -7º C and +24 ºC for the uninsulated, +3 ºC and +20 ºC for the semi-insulated and +10 ºC and +25 ºC for the fully-insulated dairy buildings. The measurement results showed that the uninsulated dairy buildings had lower indoor gas concentrations and emissions compared to fully insulated buildings. Although occasionally exceeded, the ventilation rates and average indoor air quality in the dairy buildings were largely within recommended limits. We assessed the traditional heat balance, moisture balance, carbon dioxide balance and direct airflow methods for estimating ventilation rates. The direct velocity measurement for the estimation of ventilation rate proved to be impractical for naturally ventilated buildings. Two methods were developed for estimating ventilation rates. The first method is applicable in buildings in which the ventilation can be stopped or completely closed. The second method is useful in naturally ventilated buildings with large openings and high ventilation rates where spatial gas concentrations are heterogeneously distributed. The two traditional methods (carbon dioxide and methane balances), and two newly developed methods (theoretical modelling using Fick s law and boundary layer theory, and the recirculation flux-chamber technique) were used to estimate ammonia emissions from the dairy buildings. Using the traditional carbon dioxide balance method, ammonia emissions per cow from the dairy buildings ranged from 7 g day-1 to 35 g day-1, and methane emissions per cow ranged from 96 g day-1 to 348 g day-1. The developed methods proved to be as equally accurate as the traditional methods. Variation between the mean emissions estimated with the traditional and the developed methods was less than 20%. The developed modelling procedure provided sound framework for examining the impact of production systems on ammonia emissions in dairy buildings.

Subterranean termite infestation in buildings.

Describes: the Queensland Building Act, how termites infest buildings, prevention, being aware of the risks, regular inspections, precaution, eliminate conditions that favour infestation, termite resistant timbers, physical barriers, chemical barriers, integrated management for prevention and treatment, treating active infestation by professionals.

Identiteettien maisemat Saskatchewanin Uudessa Suomessa : Uudisasutuksesta uusidentifikaatioon

The present study examines how the landscape of the rural immigrant colony of New Finland (Saskatchewan, Canada) has reflected the Finnish origins of the about 350 settlers and their descendants, their changing ideologies, values, sense of collectiveness and the meanings of the Finnish roots. The study also reveals the reasons and power structures behind the ethnic expressions. Researched time period runs from the beginning of the settlement in 1888 to the turn of the millennium. The research concentrates on buildings, cemeteries, personal names and place names which contain strong visual and symbolic messages and are all important constituents of mundane landscapes. For example, the studied personal names are important identity-political indexes telling about the value of the Finnish nationalism, community spirit, dual Finnish-Canadian identities and also the process of assimilation which, for example, had differences between genders. The study is based on empirical field research, and iconographical and textual interpretations supported by classifications and comparative analyses. Several interviews and literature were essential means of understanding the changing political contexts which influenced the Finnish settlement and its multiple landscape representations. Five historical landscape periods were identified in New Finland. During these periods the meanings and representations of Finnish identity changed along with national and international politics and local power structures. For example, during the Second World War Canada discouraged representations of Finnish culture because Finland and Canada were enemies. But Canada s multicultural policy in the 1980s led to several material and symbolic representations indicating the Finnish settlement after a period of assimilation and deinstitutionalization. The study shows how these representations were indications of the politics of a (selective) memory. Especially Finnish language, cultural traditions and the Evangelical-Lutheran values of the pioneers, which have been passed down to new generations, are highly valued part of the Finnish heritage. Also the work of the pioneers and their participation in the building of Saskatchewan is an important collective narrative. The selectiveness of a memory created the landscape of forgetting which includes deliberately forgotten parts of the history. For example, the occasional disputes between the congregations are something that has been ignored. The results show how the different landscape elements can open up a useful perspective to diaspora colonies or other communities also by providing information which otherwise would be indistinguishable. In this case, for example, two cemeteries close together were a sign of religious distributions among the early settlers.

Indoor air quality and energy management through real–time sensing in commercial buildings

Rapid growth in the global population requires expansion of building stock, which in turn calls for increased energy demand. This demand varies in time and also between different buildings, yet, conventional methods are only able to provide mean energy levels per zone and are unable to capture this inhomogeneity, which is important to conserve energy. An additional challenge is that some of the attempts to conserve energy, through for example lowering of ventilation rates, have been shown to exacerbate another problem, which is unacceptable indoor air quality (IAQ). The rise of sensing technology over the past decade has shown potential to address both these issues simultaneously by providing high–resolution tempo–spatial data to systematically analyse the energy demand and its consumption as well as the impacts of measures taken to control energy consumption on IAQ. However, challenges remain in the development of affordable services for data analysis, deployment of large–scale real–time sensing network and responding through Building Energy Management Systems. This article presents the fundamental drivers behind the rise of sensing technology for the management of energy and IAQ in urban built environments, highlights major challenges for their large–scale deployment and identifies the research gaps that should be closed by future investigations.

Inside out: Why do so many great buildings have drab interiors?

An extravaganza of shapes now forms our city skylines. CAD and BIM with their inbuilt links to manufacturing and construction processes has made possible this kind of effusive architectural expression, at least externally. Building developers clearly understand the enormous marketing potential for impact expression. The skilled manipulation of 3D CAD software enables architects to achieve usable gross floor space within an enticingly sinuous, but build-able, envelope. This critical factor is resulting in a fundamental change to the appearance of our cities. It has become plausible, at least, to design and build complex and non-repetitive buildings without incurring prohibitive additional labor costs.However The ground level lobby spaces often do manage to retain some of the external. However, the interior working spaces, particularly in commercial office buildings tend to loose this grand gesture. However - the internal activity - the very reason for the existence of the building – often takes place in monotonous spaces that seem driven predominately by the need to accommodate workstation furniture and functions in dire need of reconsideration.

Image Heritage - The Temporal Dimension in Consumers' Corporate Image Constructions

Images and brands have been topics of great interest in both academia and practice for a long time. The company’s image, which in this study is considered equivalent to the actual corporate brand, has become a strategic issue and one of the company’s most valuable assets. In contrast to mainstream corporate branding research focusing on consumerimages as steered and managed by the company, in the present study a genuine consumer-focus is taken. The question is asked: how do consumers perceive the company, and especially, how are their experiences of the company over time reflected in the corporate image? The findings indicate that consumers’ corporate images can be seen as being constructed through dynamic relational processes based on a multifaceted network of earlier images from multiple sources over time. The essential finding is that corporate images have a heritage. In the thesis, the concept of image heritage is introduced, which stands for the consumer’s earlier company-related experiences from multiple sources over time. In other words, consumers construct their images of the company based on earlier recalled images, perhaps dating back many years in time. Therefore, corporate images have roots - an image heritage – on which the images are constructed in the present. For companies, image heritage is a key for understanding consumers, and thereby also a key for consumer-focused branding strategies and activities. As image heritage is the consumer’s interpretation base and context for image constructions here and now, branding strategies and activities that meet this consumer-reality has a potential to become more effective. This thesis is positioned in the tradition of The Nordic School of Marketing Thought and introduces a relational dynamic perspective into branding through consumers’ image heritage. Anne Rindell is associated to CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration.