The effect of skewness and kurtosis on the Kenward-Roger approximation when group distributions differ

This study examined the independent effect of skewness and kurtosis on the robustness of the linear mixed model (LMM), with the Kenward-Roger (KR) procedure, when group distributions are different, sample sizes are small, and sphericity cannot be assumed. Methods: A Monte Carlo simulation study considering a split-plot design involving three groups and four repeated measures was performed. Results: The results showed that when group distributions are different, the effect of skewness on KR robustness is greater than that of kurtosis for the corresponding values. Furthermore, the pairings of skewness and kurtosis with group size were found to be relevant variables when applying this procedure. Conclusions: With sample sizes of 45 and 60, KR is a suitable option for analyzing data when the distributions are: (a) mesokurtic and not highly or extremely skewed, and (b) symmetric with different degrees of kurtosis. With total sample sizes of 30, it is adequate when group sizes are equal and the distributions are: (a) mesokurtic and slightly or moderately skewed, and sphericity is assumed; and (b) symmetric with a moderate or high/extreme violation of kurtosis. Alternative analyses should be considered when the distributions are highly or extremely skewed and samples sizes are small.

The right dorsolateral prefrontal cortex prevents post-error slowing

Adjusting behavior following the detection of inappropriate actions allows flexible adaptation to task demands and environmental contingencies during goal-directed behaviors. Post-error behavioral adjustments typically consist in adopting more cautious response mode, which manifests as a slowing down of response speed. Although converging evidence involves the dorsolateral prefrontal cortex (DLPFC) in post-error behavioral adjustment, whether and when the left or right DLPFC is critical for post-error slowing (PES), as well as the underlying brain mechanisms, remain highly debated. To resolve these issues, we used single-pulse transcranial magnetic stimulation in healthy human adults to disrupt the left or right DLPFC selectively at various delays within the 30-180ms interval following false alarms commission, while participants preformed a standard visual Go/NoGo task. PES significantly increased after TMS disruption of the right, but not the left DLPFC at 150ms post-FA response. We discuss these results in terms of an involvement of the right DLPFC in reducing the detrimental effects of error detection on subsequent behavioral performance, as opposed to implementing adaptative error-induced slowing down of response speed.

Análisis del error de medición y variabilidad interespecífica morfométrica de Fourier en M2 de primates Hominoidea

Los análisis de Fourier permiten caracterizar el contorno del diente y obtener una serie de parámetros para un posterior análisis multivariante. Sin embargo, la gran complejidad que presentan algunas formas obliga a determinar el error de medición intrínseco que se produce. El objetivo de este trabajo es aplicar y validar los análisis de Fourier en el estudio de la forma dental del segundo molar inferior (M2) de cuatro especies de primates Hominoidea para explorar la variabilidad morfométrica interespecífica, así como determinar el error de medición a un nivel intra e interobservador. El contorno de la superficie oclusal del diente fue definido digitalmente y con las funciones derivadas del análisis de Fourier se realizaron Análisis Discriminantes y Test de Mantel (correlaciones de Pearson) para determinar las diferencias de forma a partir de las mediciones tomadas. Los resultados indican que el análisis de Fourier muestra la variabilidad de forma en dientes molares en especies de primates Hominoidea. Adicionalmente, los altos niveles de correlación a nivel intra (r>0,9) como interobservador (r>0,7) sugieren que la descripción morfométrica del diente a partir de métodos de Fourier realizados por diferentes observadores puede ser agrupada para posteriores análisis.

Avaliando as aproximações usadas no ensino de Físico-Química

The approaches are part of the everyday of the Physical Chemistry. In many didactic books in the area of Chemistry, the approaches are validated starting from qualitative and not quantitative approaches. We elaborated some examples that allow evaluating the quantitative impact of the approaches, being considered the mistake tolerated for the approximate calculation. The estimate of the error in the approaches should serve as guide to establish the validity of the calculation, which use them. Thus, the shortcut that represents a calculation approached to substitute accurate calculations; it can be used without it loses of quality in the results, besides indicating, as they are valid the adopted criterions.

Features extraction based on the Discrete Hartley Transform for closed contour

In this paper the authors propose a new closed contour descriptor that could be seen as a Feature Extractor of closed contours based on the Discrete Hartley Transform (DHT), its main characteristic is that uses only half of the coefficients required by Elliptical Fourier Descriptors (EFD) to obtain a contour approximation with similar error measure. The proposed closed contour descriptor provides an excellent capability of information compression useful for a great number of AI applications. Moreover it can provide scale, position and rotation invariance, and last but not least it has the advantage that both the parameterization and the reconstructed shape from the compressed set can be computed very efficiently by the fast Discrete Hartley Transform (DHT) algorithm. This Feature Extractor could be useful when the application claims for reversible features and when the user needs and easy measure of the quality for a given level of compression, scalable from low to very high quality.

Time course of error detection and correction in humans: neurophysiological evidence.

Using event-related brain potentials, the time course of error detection and correction was studied in healthy human subjects. A feedforward model of error correction was used to predict the timing properties of the error and corrective movements. Analysis of the multichannel recordings focused on (1) the error-related negativity (ERN) seen immediately after errors in response- and stimulus-locked averages and (2) on the lateralized readiness potential (LRP) reflecting motor preparation. Comparison of the onset and time course of the ERN and LRP components showed that the signs of corrective activity preceded the ERN. Thus, error correction was implemented before or at least in parallel with the appearance of the ERN component. Also, the amplitude of the ERN component was increased for errors, followed by fast corrective movements. The results are compatible with recent views considering the ERN component as the output of an evaluative system engaged in monitoring motor conflict.

Approximation to the theory of affinities to manage the problems of the groupping process

New economic and enterprise needs have increased the interest and utility of the methods of the grouping process based on the theory of uncertainty. A fuzzy grouping (clustering) process is a key phase of knowledge acquisition and reduction complexity regarding different groups of objects. Here, we considered some elements of the theory of affinities and uncertain pretopology that form a significant support tool for a fuzzy clustering process. A Galois lattice is introduced in order to provide a clearer vision of the results. We made an homogeneous grouping process of the economic regions of Russian Federation and Ukraine. The obtained results gave us a large panorama of a regional economic situation of two countries as well as the key guidelines for the decision-making. The mathematical method is very sensible to any changes the regional economy can have. We gave an alternative method of the grouping process under uncertainty.

Error Modeling and Accuracy Analysis of a Novel Mobile Hybrid Parallel Robot

Over the last decades, calibration techniques have been widely used to improve the accuracy of robots and machine tools since they only involve software modification instead of changing the design and manufacture of the hardware. Traditionally, there are four steps are required for a calibration, i.e. error modeling, measurement, parameter identification and compensation. The objective of this thesis is to propose a method for the kinematics analysis and error modeling of a newly developed hybrid redundant robot IWR (Intersector Welding Robot), which possesses ten degrees of freedom (DOF) where 6-DOF in parallel and additional 4-DOF in serial. In this article, the problem of kinematics modeling and error modeling of the proposed IWR robot are discussed. Based on the vector arithmetic method, the kinematics model and the sensitivity model of the end-effector subject to the structure parameters is derived and analyzed. The relations between the pose (position and orientation) accuracy and manufacturing tolerances, actuation errors, and connection errors are formulated. Computer simulation is performed to examine the validity and effectiveness of the proposed method.

3D Surface Modeling From Point Clouds

The goal of this thesis is to implement software for creating 3D models from point clouds. Point clouds are acquired with stereo cameras, monocular systems or laser scanners. The created 3D models are triangular models or NURBS (Non-Uniform Rational B-Splines) models. Triangular models are constructed from selected areas from the point clouds and resulted triangular models are translated into a set of quads. The quads are further translated into an estimated grid structure and used for NURBS surface approximation. Finally, we have a set of NURBS surfaces which represent the whole model. The problem wasn’t so easy to solve. The selected triangular surface reconstruction algorithm did not deal well with noise in point clouds. To handle this problem, a clustering method is introduced for simplificating the model and removing noise. As we had better results with the smaller point clouds produced by clustering, we used points in clusters to better estimate the grids for NURBS models. The overall results were good when the point cloud did not have much noise. The point clouds with small amount of error had good results as the triangular model was solid. NURBS surface reconstruction performed well on solid models.

Error en el consentimiento en los contratos de SWAP

Cada cert temps hi ha assumptes d’alt interès social dins de la jurisdicció. En els últims anys, coincidint amb la crisi financera internacional, els assumptes relatius a contractes bancaris complexos, sobretot permutes financeres o swaps, han tingut una gran rellevància. En un context de crisi financera internacional, i també nacional, s'han estès el nombre de demandes dirigides contra bancs i entitats financeres. Són reclamacions en les quals se sol·licita la declaració de nul·litat dels citats contractes, principalment es basa en un error del consentiment, nul·litat que comporta la devolució de les quantitats invertides, de les rentabilitats esperades o de les penalitzacions aplicades davant la resolució anticipada d'us contractes pels clients defraudats en les seves expectatives. Les presents pàgines pretenen un estudi dels litigis sobre SWAPS, principalment dels “Interest Rate Swap”, identificar quins són els contractes bancaris complexes, quines són les normes de consentiment contractual que els regeixen. Respecte dels primers, cal destacar que l'elevat nombre de casos plantejats davant els nostres tribunals no es tradueix en una casuística tan àmplia com seria imaginable. La gran majoria versa sobre les peticions de nul·litat del contracte (total o parcial) realitzades pels clients, al moment en què l'Euribor va descendir, i que allò que molts havien contractat com un segur de cobertura enfront dels elevats tipus d'interès que havien de pagar per les seves hipoteques, veien com conforme als pactes en el contracte, havien de satisfer al seu contrapart (una entitat de crèdit) una liquidació.

Bias and standard error for social reciprocity measurements

The directional consistency and skew-symmetry statistics have been proposed as global measurements of social reciprocity. Although both measures can be useful for quantifying social reciprocity, researchers need to know whether these estimators are biased in order to assess descriptive results properly. That is, if estimators are biased, researchers should compare actual values with expected values under the specified null hypothesis. Furthermore, standard errors are needed to enable suitable assessment of discrepancies between actual and expected values. This paper aims to derive some exact and approximate expressions in order to obtain bias and standard error values for both estimators for round-robin designs, although the results can also be extended to other reciprocal designs.

TitGer: uma planilha eletrônica para simulação de titulação de mistura de compostos polipróticos

The aim of this paper is to present a simple way of treating the general equation for acid-base titrations based on the concept of degree of dissociation, and to propose a new spreadsheet approach for simulating the titration of mixtures of polyprotic compounds. The general expression, without any approximation, is calculated a simple iteration method, making number manipulation easy and painless. The user-friendly spreadsheet was developed by using MS-Excel and Visual-Basic-for-Excel. Several graphs are drawn for helping visualizing the titration behavior. A Monte Carlo function for error simulation was also implemented. Two examples for titration of alkalinity and McIlvaine buffer are presented.

Entrevista con Manuel Villegas sobre 'El error de Prometeo. Psico(pato)logía del desarrollo moral'

Entrevista con Manuel Villegas

Design and Analysis of Forward Error Control Coding and Signaling for Guaranteeing QoS in Wireless Broadcast Systems

Broadcasting systems are networks where the transmission is received by several terminals. Generally broadcast receivers are passive devices in the network, meaning that they do not interact with the transmitter. Providing a certain Quality of Service (QoS) for the receivers in heterogeneous reception environment with no feedback is not an easy task. Forward error control coding can be used for protection against transmission errors to enhance the QoS for broadcast services. For good performance in terrestrial wireless networks, diversity should be utilized. The diversity is utilized by application of interleaving together with the forward error correction codes. In this dissertation the design and analysis of forward error control and control signalling for providing QoS in wireless broadcasting systems are studied. Control signaling is used in broadcasting networks to give the receiver necessary information on how to connect to the network itself and how to receive the services that are being transmitted. Usually control signalling is considered to be transmitted through a dedicated path in the systems. Therefore, the relationship of the signaling and service data paths should be considered early in the design phase. Modeling and simulations are used in the case studies of this dissertation to study this relationship. This dissertation begins with a survey on the broadcasting environment and mechanisms for providing QoS therein. Then case studies present analysis and design of such mechanisms in real systems. The mechanisms for providing QoS considering signaling and service data paths and their relationship at the DVB-H link layer are analyzed as the first case study. In particular the performance of different service data decoding mechanisms and optimal signaling transmission parameter selection are presented. The second case study investigates the design of signaling and service data paths for the more modern DVB-T2 physical layer. Furthermore, by comparing the performances of the signaling and service data paths by simulations, configuration guidelines for the DVB-T2 physical layer signaling are given. The presented guidelines can prove useful when configuring DVB-T2 transmission networks. Finally, recommendations for the design of data and signalling paths are given based on findings from the case studies. The requirements for the signaling design should be derived from the requirements for the main services. Generally, these requirements for signaling should be more demanding as the signaling is the enabler for service reception.