O princípio metafísico da poética de Aristóteles

Aristotle's definition of tragedy indicates a metaphysical project insinuated by a notion of kátharsis. The reconstruction of Aristotle's method of definition is inspired in the concepts of enérgeia and dýnamis taken from Physics, understanding cause as substance. The Doctrine of the Four Causes is the theoretical basis of the definition of tragedy, placing tragedy in the genre of imitation and distinguishing its species: language (material cause), noble and complete action (formal cause), actors (efficient cause) and kátharsis (temporarily identified with the final cause). Nevertheless, there is no final cause in the definition of tragedy. The kátharsis of passions is experienced by the spectator when he witnesses tragedy, which is the imitation of a noble action, executed by actors and not narrated. Aristotle justifies hid proposition in favor of mimesis by assuming that imitation is natural to man since infancy and the view of objects allows whoever contemplates them to identify and learn the originals. As a metaphysical principle, kátharsis is projected to beyond definition of tragedy, where it is manifested cathartically, in the spectator. Research about the spectator brings one back to the definition of tragedy, where the imitation is an imperfect copy which evokes in the spectator the presence of the originals of the imitated sentiments, thus realizing the kátharsis of these emotions. In this way kátharsis reveals itself as selfknowledge and approach of divine truth and perfections.

Genotoxicity and Fetal Abnormality in Streptozotocin-Induced Diabetic Rats Exposed to Cigarette Smoke Prior to and during Pregnancy

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histological and immunohistochemical study of the expression of p53 and ki-67 proteins in the mucosa of the tongue, pharynx and larynx of rats exposed to cigarette smoke

Introduction: Head and neck cancers are linked to smoking. The most affected sites are the oral cavity, pharynx and larynx. Experimental studies show epithelial lesions caused by cigarette smoke. Objectives: To investigate in rats the effects of acute cigarette smoke exposure on the mucosa of the tongue, pharynx and larynx.Material and method: Wistar rats were allocated into two groups of 20 animals: CG (control) receiving food and water ad libitum and TG (Tobacco) exposed to the smoke of 40 cigarettes/day for 60 days. Biopsy of their tongues, pharynxes and larynxes were subjected to histopathological, histomorphometric and immunohistochemical studies of protein p53 and ki-67.Result: The histological analysis of tongue from the Tobacco group revealed epithelial hyperplasia (90%), basal cell hyperplasia (95%) and mild to moderate dysplasia (85%). In pharynx showed basal cell hyperplasia (85%), dysplasia (25%) and vascular congestion (95%). In larynx showed basal cell hyperplasia (70%), epithelial hyperplasia (55%), congestion (100%) and inflammatory infiltrate (25%). Morphometric analysis revealed that keratin layer thickness was greater in the tobacco group. P53 immunoexpression was negative in both groups. Ki-67 immunoexpression was positive in basal cell nuclei but in parabasal cell nuclei it was positive only in the Tobacco group.Conclusions: The exposure of animals to cigarette smoke for 60 days resulted in benign lesions. The duration of exposure was not enough to cause the development cancer, as confirmed by the negative expression of p53 protein in all slides examined. Analysis of ki-67 expression showed intense epithelial proliferation in response to damage.

Influences of the insertion method in glass ionomer cement porosity

The aim of this study was to evaluate the presence of porosities inside the glass ionomer cement (GIC) after different techniques of material insertion. MATERIAL and METHOD: Specimens were prepared with high-viscosity GIC Ketac Molar Easymix and divided into three groups according to the insertion method: spatula (PI), Centrix injector (CI), and low-cost syringe (LCS). The specimens were fractured and observed with scanning electronic microscopy to quantitatively evaluate porosity inside the material using Image J Software. RESULTS: Statistical analysis, ANOVA application, and Tukey test to significance level of 5%, revealed that there was no statistical difference between the groups. CONCLUSION: Although the use of LCS has not decreased the porosity of the material, this insertion method is easy, accessible, and low cost, which makes it a viable alternative of use in the ART technique and in others bucal health programs. Microsc. Res. Tech., 2012. (c) 2012 Wiley Periodicals, Inc.

Adhesives with different pHs: Effect on the MTBS of chemically activated and light-activated composites to human dentin

Purpose: To evaluate the bond strength between human dentin and composites, using two light-activated single-bottle total-etch adhesive systems with different pHs combined with chemically activated and light-activated-composites. The tested hypothesis was that the dentin bond strength is not influenced by an adhesive system of low pH, combined with chemically activated or light-activated composites. Material and Method: Flat dentin surfaces of twenty-eight human third molars were allocated in 4 groups (n=7), depending on the adhesive system: (One Step Plus-OS and Prime & Bond NT-PB) and composite (light-activated Filtek Z-100 [Z100] and chemically activated Bisfil 2B [B2B]). Each adhesive system was applied on acid-etched dentin and then one of the composites was added to form a 5 mm-high resin block. The specimens were stored in tap water (37 degrees C/24 h) and sectioned into two axes, x and y. This was done with a diamond disk under coolant irrigation to obtain beams with a cross-section area of approximately 0.8 mm(2). Each specimen was then attached to a custom-made device and submitted to the microtensile test (1 mm.min(-1)). Data were analyzed using two-way ANOVA and Tukey's tests (p<0.05). Results: the anticipated hypothesis was not confirmed (p<0.0001). The bond strengths (MPa) were not statistically different between the two adhesive systems when light-activated composite was used (OS+Z100 = 24.7 +/- 7.1(a); PB+Z100 = 23.8 +/- 5.7(a)). However, with use of the chemically activated composite (B2B), PB (7.8 +/- 3.6(b) MPa) showed significantly lower dentin bond strengths than OS (32.2 +/- 7.6(a)). Conclusion: the low pH of the adhesive system can affect the bond of chemically activated composite to dentin. on the other hand, under the present conditions, the low pH did not seem to affect the bond of light-activated composites to dentin significantly.

Cigarette smoking and high-risk HPV DNA as predisposing factors for high-grade cervical intraepithelial neoplasia (CIN) in young Brazilian women

Background. This cross-sectional study was designed to evaluate the role of cigarette smoking and high-risk HPV types as risk factors of CIN 2 and 3 in young, sexually active Brazilian women. Materials and method. A series of 100 consecutive women with abnormal Pap smears were recruited, subjected to colposcopy, punch biopsy, and questionnaire for their social, sexual and reproductive factors. Of these, 77 women between 20 and 35 years of age (median 26.5 years) with biopsy-confirmed CIN 1 or CIN 2 and 3, were enrolled in this study. Representative samples from the exocervix and endocervix were obtained for HPV testing with the Hybrid Capture HPV-DNA assay, including the probes for the oncogenic HPV types (16, 18, 31, 33, 35, 45, 51, 52 and 56). Results. The overall rate of CIN 2 and 3 was 23/77 (29.8%). The women with CIN 1, 2 and 3 did not differ from each other with regard to their age, race, schooling, marital status, life-time number of sexual partners, age at first intercourse, use of oral contraceptives, or parity. However, current cigarette smoking was strongly associated with CIN 2 and 3 (p < 0,001), and among smokers, the risk of high-grade CIN increased in parallel with the time of exposure (years of smoking) p = 0.07), HPV-DNA of the oncogenic types was detected in 43 (56%) women, the risk of being HPV DNA-positive was significantly higher in CIN 2 and 3 as compared with CIN 1 (p = 0.037). Importantly, the prevalence of high-risk HPV types was significantly higher in cigarette smokers than in non-smokers (p = 0.046). Conclusions. The results indicate that the severity of CIN lesions was clearly related to two fundamental risk factors: 1) high-risk HPV types, and 2) current cigarette smoking. These two risk factors were closely interrelated in that the high-risk HPV types were significantly more frequent in current smokers than in non-smokers, suggesting the possibility of a synergistic action between these two risk factors in cervical carcinogenesis.

Anatomic and radiograph study of the persistence of Foramen of Huschke

Aim: the aim of this study is to assess and locate the Foramen of Huschke. Study design: anatomical. Material and Method: using contrast material like gutta-percha and barium sulfate, through extraoral radiographs, such as panoramic, submental vertex and corrected saggital linear Temporal Mandibular Joint tomograms in four skulls where we clinically checked the existence of foramen of Huschke. Results: The results proved that the foramen of Huschke can be observed in skulls submitted to contrast using radiographic techniques.

Bond strength durability of direct and indirect composite systems following surface conditioning for repair

Purpose: This study evaluated the effect of surface conditioning methods and thermocycling on the bond strength between a resin composite and an indirect composite system in order to test the repair bond strength. Materials and Methods: Eighteen blocks (5 x 5 x 4 mm) of indirect resin composite (Sinfony) were fabricated according to the manufacturer's instructions. The specimens were randomly assigned to one of the following two treatment conditions (9 blocks per treatment): (1) 10% hydrofluoric acid (HF) for 90 s (Dentsply) + silanization, (2) silica coating with 30-Ìm SiOx particles (CoJet) + silanization. After surface conditioning, the bonding agent was applied (Adper Single Bond) and light polymerized. The composite resin (W3D Master) was condensed and polymerized incrementally to form a block. Following storage in distilled water at 37°C for 24 h, the indirect composite/resin blocks were sectioned in two axes (x and y) with a diamond disk under coolant irrigation to obtain nontrimmed specimens (sticks) with approximately 0.6 mm2 of bonding area. Twelve specimens were obtained per block (N = 216, n = 108 sticks). The specimens from each repaired block were again randomly divided into 2 groups and tested either after storage in water for 24 h or thermocycling (6000 cycles, 5°C to 55°C). The microtensile bond strength test was performed in a universal testing machine (crosshead speed: 1 mm/min). The mean bond strengths of the specimens of each block were statistically analyzed using two-way ANOVA (α = 0.05). Results: Both surface conditioning (p = 0.0001) and storage conditions (p = 0.0001) had a significant effect on the results. After 24 h water storage, silica coating and silanization (method 2) showed significantly higher bond strength results (46.4 ± 13.8 MPa) than that of hydrofluoric acid etching and silanization (method 1) (35.8 ± 9.7 MPa) (p < 0.001). After thermocycling, no significant difference was found between the mean bond strengths obtained with method 1 (34.1 ± 8.9 MPa) and method 2 (31.9 ± 7.9 MPa) (p > 0.05). Conclusion: Although after 24 h of testing, silica coating and silanization performed significantly better in resin-resin repair bond strength, both HF acid gel and silica coating followed by silanization revealed comparable bond strength results after thermocycling for 6000 times.

Analysis of the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel

Objective: To analyze the effects of thermal cycling on the microtensile shear bond strength of a self-etching and a conventional pit and fissure sealants to dental enamel. Material and Method: Twenty-four healthy human molars extracted for orthodontic reasons, were sectioned in the mesio-distal direction and divided into two groups (n=24) according to the sealant to be applied: GI - conventional sealant Climpro (3M/ESPE) and GII - self-etching sealant Enamel Loc (Premier Dental). The sealants were applied on flattened enamel in matrixes 1 mm in diameter, in accordance with the manufacturers' recommendations. The specimens were stored in distilled water at 37°C for 24 hours. After this, half the samples of both groups were submitted to 500 thermal cycles in 30s baths at temperatures between 5 and 55°C. Forty-eight hours after the samples were made, the microtensile shear test was performed in an Instron 4411 test machine, with a stainless steel wire with a cylindrical cross section of 0.2mm in diameter at a constant speed of 0.5mm/s. The bond strength values were submitted to ANOVA for 2 factors and the fracture patterns were examined under an optical microscope at 65X magnification. Results: Thermal cycling did not influence the bond strength of the two sealants. The conventional sealant Climpro presented a statistically higher microtensile shear bond strength (11.72MPa, 11.34MPa with and without cycling, respectively) than the self-etching sealant Enamel Loc (5.92MPa, 5.02MPa with and without cycling, respectively). Fracture pattern analysis showed the occurrence of 100% of adhesive failures for Enamel Loc, while the conventional sealant Climpro presented 95% of adhesive failures and 5% of mixed failures. Conclusion: The conventional sealant presented higher microtensile shear bond strength to dental enamel in comparison with the self-etching sealant. Thermal cycling did not affect the bond strength of the sealants used in this study. © 2011 Nova Science Publishers, Inc.

Ultrasound-assisted extraction of Na and K from swine feed and its application in a digestibility assay: A green analytical procedure

The study is aimed to evaluate the efficiency of ultrasound-assisted extraction (UAE) as a simple strategy focused on sample preparation for metal determination in biological samples. The extraction of sodium and potassium extraction was carried out from swine feed followed by determination of the concentration of these metals by flame atomic emission spectrometry (FAES). The experiment was performed to cover the study of the variables influencing the extraction process and its optimal conditions (sample mass, particle size, acid concentration, sonication time and ultrasound power); the determination of these analytical characteristics and method validation using certified reference material; and the analysis of pre-starter diets. The optimal conditions established conditions were as follows: mass: 100 mg, particle size:<60 μm, acid concentration: 0.10 mol L-1 HCl, sonication time: 50 s and ultrasound power: 102 W. The proposed method (UAE) was applied in digestibility assays of those nutrients present in different piglet pre-starter feeds and their results proved to be compatible with those obtained from mineralized samples (P < 0.05). The ultrasound extraction method was demonstrated to be an excellent alternative for handless sampling and operational costs and the method also has the advantage of does not generating toxic residues that may negatively affect human health and contaminate the environment. © 2013 Elsevier B.V. All rights reserved.

Discurso e poder em pesquisas pós-estruturalistas-foucaultianas no GT de currículo da ANPED no período de 2000 a 2005

A presente Dissertação corporifica o trabalho de pesquisa sobre os artigos aprovados pela Associação Nacional de Pós-Graduação e Pesquisa em Educação ANPEd, no Grupo de Trabalho de Currículo, no período de 2000 a 2005. Dentre os setenta e seis artigos, escritos em Língua Portuguesa e disponíveis no site desta Instituição, foram selecionados quatorze que se explicitaram ou foram arrolados como inseridos na concepção pós-estruturalista-foucaultiana. O problema foi construído e delimitado a partir da seguinte questão: Como os conceitos de discurso e poder são imbricados teórica e metodologicamente nos textos pós-estruturalistasfoucaultianos publicados pela ANPEd, no período de 2000 a 2005? Objetivou-se saber quais as estratégias metodológicas utilizadas nas análises que operam com os conceitos supracitados, a partir da acepção utilizada por Foucault; qual a produtividade do currículo e da pesquisa inseridos ou vislumbrados a partir dessa perspectiva teórico-metodológica e quais os seus possíveis efeitos de conjunto nas discussões curriculares da atualidade. A metodologia foi engendrada a partir das contribuições foucaultianas contidas em obras e em discussões desse autor que permeiam a teorização curricular da atualidade no cenário nacional. A teoria foi utilizada como forma de exercício de problematização e desconstrução de discursos, conceitos e perspectivas que medeiam e fabricam o currículo e a pesquisa no campo das teorizações curriculares contemporâneas. Dentre os resultados mais significativos, apresentam-se as discussões em torno da diferença do caráter inventivo do currículo e da pesquisa pós-estruturalista como acontecimentos; o currículo pós ainda não teve a materialização de sua condição de possibilidade de existência, ou seja, o mesmo não existe como prática discursiva efetiva e nem como objeto de investigação das teorizações pós; a pesquisa pós, ao contrário, apresenta-se como conhecimento em sua acontecência e exibe seus efeitos: a construção de uma narrativa repetitiva sobre algumas dimensões, funções e efeitos do poder e do discurso acerca da análise dos diferentes textos curriculares; a presença de interditos nos discursos curriculares como a exclusão/substituição ou timidez no uso de palavras que possam remeter a alguma forma de prescrição e, a vontade de verdade e de poder como efeitos discursivos de conjunto das pesquisas pós-estruturalistas. Atentando para a orientação foucaultiana, esses interditos foram analisados em sua produtividade e positividade discursivas.

Cartografias do Diário do Pará: um estudo genealógico do acontecimento homicídio contra jovens em um caderno policial

Esta dissertação teve como objetivo analisar a forma como é abordado o acontecimento homicídio contra jovens no caderno “Polícia” do Diário do Pará, jornal impresso de grande circulação no estado. O Diário do Pará, como um veículo de comunicação de massa, produz saberes, faz circular certos valores, institui regimes de verdade e forja subjetividades, que coadunam com o projeto político e econômico do (neo)liberalismo. Desta forma, empreendemos uma breve análise cartográfica das forças políticas e econômicas contemporâneas que regulamentam as parcelas juvenis e outros segmentos populacionais que, em nossa análise, fundamentam as racionalidades do Diário do Pará na produção de notícias sobre o homicídio juvenil. À luz do método arquegenealógico, damos visibilidade a rede de enunciados e práticas não-discursivas deste jornal, que projetam o lugar da juventude, especialmente a pobre e não-escolarizada, aos territórios da violência e da criminalidade. Notamos que, nas matérias jornalísticas analisadas, a morte dos jovens é produzida como um acontecimento, ao mesmo tempo, impactante, em virtude dos recursos sensacionalistas utilizados na construção da notícia, e justificável por ser objetivada como resultado de uma trajetória juvenil que insistiu em desviar do modelo do bom cidadão (dócil e produtivo), ao enveredar pelos caminhos da criminalidade e dos vícios. As práticas jornalísticas lançam um feixe de luz sobre a vida dos jovens considerados infames, ao buscar informações minuciosas sobre o que denominam de “vida pregressa” da vítima e acionam o “dispositivo de periculosidade”, que associa pobreza a violência. Concluímos, ainda, que as práticas deste jornal conectam-se a obsessão securitária que tem investido todo o corpo social e o tem organizado a partir da demanda por lei e ordem.

Median ages at stages of sexual maturity and excess weight in school children

Background: We aimed to estimate the median ages at specific stages of sexual maturity stratified by excess weight in boys and girls.Materials and method: This was a cross-sectional study made in 2007 in Florianopolis, Brazil, with 2,339 schoolchildren between 8 to 14 years of age (1,107 boys) selected at random in two steps (by region and type of school). The schoolchildren were divided into: i) those with excess weight and ii) those without excess weight, according to the WHO 2007 cut-off points for gender and age. Sexual maturity was self-evaluated by the subjects according to the Tanner sexual development stages, and utilizing median ages for the genitalia, breasts, and pubic hair stages.Results: In the boys with excess weight, precocity was observed in the stages 4 for genitals and pubic hair and 2 for pubic hair, with the values for excess and normal weight. The median ages at the beginning of puberty (stage 2-sexual development) for boys and girls in Florianopolis were 10.8 and 10.3 years, respectively.Conclusion: Excess weight is associated with lower median ages in the sexual maturity stages in boys and girls and that it should be taken into account when evaluating sexual maturity in children and adolescents.

Candiduria in adults and children: prevalence and antifungal susceptibility in outpatient of Jataí-GO

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inorganic elemental analysis and identification of residual monomers released from different glass ionomer cements in cell culture medium

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)