1000 resultados para Supervisors, Industrial
Resumo:
Reveste-se de grande importância o conhecimento da marcha de absorção de nutrientes pelas culturas, principalmente visando uma aplicação racional dos fertilizantes. Utilizou-se no presente experimento a cultivar Roma VF, de porte determinado, que tem tido grande aceitação tanto pelos tomaticultores como pelas industrias processadoras. As amostras para analise foram coletadas no período junho a outubro de 1977, em uma área experimental instalada num solo representativo da região oeste do Estado de São Paulo (Latossol Vermelho Amarelo), no município de Narandiba (DIRA de Presidente Prudente)· A cultura recebeu uma adubação de 85--300-100 kg/ha de NPK, sendo 1/3 do N aplicado juntamente com todo o P e K no plantio e os 2/3 restantes aplicados em cobertura aos 30 e 35 dias após a germinação. A área foi de 1,25 x 0,30 m (26,666 covas/ha), com culturais foram os normalmente recomendados para a cultura na região. As amostras (4 repetições) foram coletadas aos 15, 30, 45, 60, 75, 90 e 105 dias após a germinação. As plantas foram separadas em folhas cotiledonares, folhas, caule e frutos. Determinou-se o peso de matéria seca e analisou-se para N, P, K, Ca, Mg, S, B, Cu, Fe, Mo e Zn. Os resultados analíticos obtidos revelaram um crescimento lento ate aos 30 dias, após o que houve um crescimento acelerado, com o peso da materia seca praticamente dobrando a cada quinzena no período dos 45 aos 75 dias, atingindo o máximo aos 105 dias (5.706,61 kg/ha). Quanto ao crescimento dos frutos, expresso em peso de materia seca, houve um aumento de cerca de 20 vezes no intervalo dos 45 aos 75 dias, praticamente duplicando o peso no período dos 75 aos 90 dias e estabilizando-se aos 105 dias (2.708,6 kg/ha). Na época de floração, as folhas apresentavam, em função da materia seca, 3,7% N; 0,50% P; 4,44% K; 3,24% Ca; 0,99% Mg; 0,46% S; 72 ppm B; 15 ppm Cu; 434 ppm Fe; 375 ppm Mn; 0,18 ppm Mo; 148 ppm Zn. A produção efetiva de 65 ton/ha obtida na área experimental, contem as seguintes quantidades de nutrientes nos frutos: 67,8 g N; 8,9 g P; 112,2g K; 7,7 g Ca; 6,0 g Mg; 3,1 g S; 93 g B; 45 g Cu; 547 g Fe; 163 g Mn; 485 mg Mo.
Resumo:
Neste trabalho foram propostas fórmulas para se calcular o rendimento esperado, em polpa concentrada, em industrias de processamento de tomate, comparando-o com o rendimento realmente obtido, e visando controlar o desempenho da indústria. Para testar estas fórmulas foi feito um estudo comparativo entre o rendimento esperado calculado e o rendimento real, tomando por base os assentamentos de uma indústria, de porte médio, de processamento de tomates, do Estado de São Paulo, nos anos agrícolas de 1981 e 1982. Concomitantemente foi feita uma análise das perdas, na forma de descartes, na esteira de seleção e de sementes e pele, nas despolpadeiras e também uma verificação do Brix médio ponderado, nas duas safras. Os resultados mostraram que as fórmulas são adequadas para o cálculo do rendimento esperado pois as diferenças, com o rendimento real, obtido foram de -1,49% e +1,74% em 1982. As perdas de tomate (descartes) foram consideradas elevadas em comparação com as de outros países o que significa tomate de baixa qualidade. O Brix médio ponderado mensal que alcançou até 5,62 foi significativamente maior que o de anos anteriores.
Resumo:
An analysis is carried out in a sample of 738 industrial plants of the determining factors in the use of internal promotion of blue-collar workers to middle managers and skilled technicians as against their external recruitment. The use of internal promotion is positively correlated with variables indicative of the efforts made by plants to measure employees' skills, and to a lesser extent, with the level of specificity of investments in human capital made by blue-collar workers. Contrary to what was expected, variables related with the use and efficiency of other incentive systems have no significant influence on the increased or decreased use of internal promotion. These results are initial evidence that internal promotions are used to protect and favour specific investments, especially those made by firms in order to discover their workers' skills.
Resumo:
El análisis del crecimiento económico moderno debe partir, en cada caso, del escenario natural en el que los procesos históricos tienen lugar. Los datos de naturaleza geográfica son muy importantes en orden al condicionamiento de las actividades de los hombres y de las sociedades. En el caso español, las constricciones del ecosistema han jugado seguramente, un rol muy destacado. La presencia desmesuradamente grande del Estado en la actividad económica y la persistencia de un déficit crónico en la balanza comercial son hechos que han caracterizado a la economía española desde fechas muy antiguas. Las páginas que siguen, no obstante, se orientan en otra dirección y presentan algunos datos especialmente relevantes relativos al secular atraso tecnológico, a la muy baja acción en Investigación y Desarrollo (I+D) tradicionalmente efectuada por los agentes económicos en España y a la preocupante debilidad de las empresas en este terreno.
Resumo:
This paper assesses empirically the importance of size discrimination and disaggregate data for deciding where to locate a start-up concern. We compare three econometric specifications using Catalan data: a multinomial logit with 4 and 41 alternatives (provinces and comarques, respectively) in which firm size is the main covariate; a conditional logit with 4 and 41 alternatives including attributes of the sites as well as size-site interactions; and a Poisson model on the comarques and the full spatial choice set (942 municipalities) with site-specific variables. Our results suggest that if these two issues are ignored, conclusions may be misleading. We provide evidence that large and small firms behave differently and conclude that Catalan firms tend to choose between comarques rather than between municipalities. Moreover, labour-intensive firms seem more likely to be located in the city of Barcelona. Keywords: Catalonia, industrial location, multinomial response model. JEL: C250, E30, R00, R12
Resumo:
El objetivo de este estudio es analizar las decisiones de localización de las actividades industriales desde una óptica sectorial. En concreto, se explica la distribución municipal en Catalunya del número de nuevas inversiones procedentes del Registro de Establecimientos Industriales, durante el período 1986-2000. Los determinantes de la localización industrial se han agrupado en tres categorías: condiciones de oferta de factores, economías de aglomeración y accesibilidad. El análisis se lleva a cabo utilizando un modelo de eventos discretos con datos de panel. Los resultados obtenidos muestran que los tres conjuntos de variables introducidas son relevantes en la explicación de la localización de las empresas manufactureras y que actúan en diferente grado para los diferentes sectores.
Resumo:
El propòsit d'aquest treball és analitzar fins a quin punt la millora en l'accessibilitat dels municipis a la xarxa viària d'alta capacitat ha tingut efectes positius en la creació d'establiments industrials. En concret, estudiem les decisions de localització d'establiments industrials a escala local per a 19 sectors manufacturers amb una desagregació de 2 dígits. Aquest treball incorpora variables de gran rellevància (com ara una mesura d'accessibilitat mesurada en temps de desplaçament i els efectes de les inversions viàries) i utilitza tècniques d'anàlisi espacial. Pel que fa a les entrades d'establiments industrials, les dades han estat obtingudes del Registre d'Establiments Industrials de Catalunya (REIC). Els resultats mostren una incidència positiva de les millores en la xarxa viària sobre les decisions de localització de les empreses.
Resumo:
This paper contributes to the existing literature on industrial location by discussing some issues regarding the territorial levels that have been used in location analysis. We analyse which could be the advantages and disadvantages of performing locational analysis at a different local levels. We use data for new manufacturing firms located at municipality, county and travel to work areas level. We show that location determinants vary according to the territorial level used in the analysis, so we conclude that the level at which we perform the investigation should be carefully selected. Keywords: industrial location, cities, agglomeration economies, count data models.
Resumo:
In 1749, Jacques de Vaucanson patented his or tour pour tirer la soie or spindle for silk reeling. In that same year he presented his invention to the Academy of the Sciences in Paris, of which he was a member1. Jacques de Vaucanson was born in Grenoble, France, in 1709, and died in Paris in 1782. In 1741 he had been appointed inspector of silk manufactures by Louis XV. He set about reorganizing the silk industry in France, in considerable difficulty at the time due to foreign competition. Given Vaucanson’s position, his invention was intended to replace the traditional Piémontes method, and had an immediate impact upon the silk industry in France and all over Europe.
Resumo:
Los frutos secos representan un peso notable en la producción final agrícola española, siendo nuestro país el segundo productor mundial de almendra (55.000 tm grano) y el cuarto de avellana (9.000 tm grano). En el caso del avellano, la superficie de España es de unas 25.000 ha (MAPA, 2000), concentrándose el 95 % de la misma en Cataluña y, más concretamente en Tarragona (18.000 ha), donde el avellano es, en diversas comarcas, una importante fuente de ingresos. Durante las últimas décadas, el sector ha estado sometido a fuertes crisis debido al descenso de precios causado, entre otros motivos, por la existencia o no de acuerdos comerciales entre la UE y Turquía sobre este fruto seco, por las oscilaciones del dólar y la competencia creciente de Turquía, que produce casi el 75 % del total mundial y cuyos costes de producción son más reducidos, por disponer de mano de obra más barata y mejores condiciones edafoclimáticas para el cultivo. Un problema adicional de la avellana española en dicho periodo, fue la poca calidad del producto obtenido, motivada por la realización inadecuada de una serie de prácticas de recogida y de postcosecha. La variedad 'Negret' es la base de la producción de avellana española para industria y, junto con la ‘Pauetet’, constituyen el tipo comercial ‘negreta’ que es el que obtiene mejor precio en el mercado nacional. Ello es debido a sus buenas características organolépticas y elevada aptitud al tostado, que constituye el punto de partida de la mayoría de aplicaciones comerciales. Por otra parte, constituye, también, la base de la producción de la Denominación de Origen ‘Avellana de Reus’. Tradicionalmente esta variedad adolece de importantes problemas de tipo agronómico (poco vigor, rebrotante, sensible a clorosis férrica, asfixia del suelo, muy virosada, etc.) y comercial (facilidad de enranciamiento, calibres pequeños, etc.), situación que ha inducido, en la última década, a la introducción de variedades foráneas (‘Tonda Giffoni’ y ‘Tonda Romana’) que en principio no presentan estos problemas. Sin embargo, la sustitución de la variedad autóctona ‘Negret’ por otras nuevas supondría la pérdida de un carácter diferencial para la producción española, que debe evaluarse con sumo cuidado.
El Real Conservatorio de Artes (1824-1850): Orígenes y gestación de la ingeniería industrial moderna
Resumo:
El "Conservatorio de Artes" tuvo un origen Ilustrado, emulando a su homónimo parisino, pero nació durante el absolutismo (1824), tras un frustrado intento afrancesado (1810). Absorbió al "Gabinete de Máquinas" y tuvo como primer director a López de Peñalver. Supuso un puente entre la Ilustración y la Ingeniería Industrial decimonónica, sobre todo, a partir de la institucionalización del envío de pensionados a la "École Centrale des Arts et Manufactures" parisina, con cuyo retorno consigue transformarse en "Real Instituto Industrial" (1850). Aparte destaca su proyección social, tanto en su papel de oficina de patentes como en la promoción de exposiciones industriales.
En els marges de la ciència?: Frenologia i mesmerisme en una cultura industrial, Barcelona 1842-1845
Resumo:
L’objectiu d’aquest treball és estudiar la popularització de la frenologia i del mesmerisme (també conegut com a magnetisme animal) a la Catalunya de mitjan segle XIX. A Catalunya el procés de popularització d’aquestes ciències va tenir el seu punt àlgid durant la primera meitat de la dècada de 1840, coincidint amb les activitats del frenòleg Marià Cubí Soler (1801-1875). El treball demostra la importància del context polític i cultural, així com la incomoditat que generaven les pràctiques de frenòlegs i magnetitzadors com a elements clau per entendre les actituds de l’elit intel•lectual catalana vers la introducció d’aquestes noves ciències.
Resumo:
The Layout of My Thesis This thesis contains three chapters in Industrial Organization that build on the work outlined above. The first two chapters combine leniency programs with multimarket contact and provide a thorough analysis of the potential effects of Amnesty Plus and Penalty Plus. The third chapter puts the whole discussion on leniency programs into perspective by examining other enforcement tools available to an antitrust authority. The main argument in that last chapter is that a specific instrument can only be as effective as the policy in which it is embedded. It is therefore important for an antitrust authority to know how it best accompanies the introduction or modification of a policy instrument that helps deterrence. INTRODUCTION Chapter 1 examines the efféct of Amnesty Plus and Penalty Plus on the incentives of firms to report cartel activities. The main question is whether the inclusion of these policies in a leniency program undermine the effectiveness of the latter by discouraging the firms to apply for amnesty. The model is static and focus on the ex post incentives of firms to desist from collusion. The results suggest that, because Amnesty Plus and Penalty Plus encourage the reporting of a second cartel after a first detection, a firm, anticipating this, may be reluctant to seek leniency and to report in the first place. However, the effect may also go in the opposite direction, and Amnesty Plus and Penalty Plus may encourage the simultaneous reporting of two cartels. Chapter 2 takes this idea further to the stage of cartel formation. This chapter provides a complete characterization of the potential anticompetitive and procompetitive effects of Amnesty Plus in a infinitely repeated game framework when the firms use their multimarket contact to harshen punishment. I suggest a clear-cut policy rule that prevents potential adverse effects and thereby show that, if policy makers follow this rule, a leniency program with Amnesty Plus performs better than one without. Chapter 3 characterizes the socially optimal enforcement effort of an antitrust authority and shows how this effort changes with the introduction or modification of specific policy instruments. The intuition is that the policy instrument may increase the marginal benefit of conducting investigations. If this effect is strong enough, a more rigorous detection policy becomes socially desirable.
Resumo:
This paper surveys recent evidence on the determinants of (national and/or foreign) industrial location. We find that the basic analytical framework has remained essentially unaltered since the early contributions of the early 1980's while, in contrast, there have been significant advances in the quality of the data and, to a lesser extent, the econometric modelling. We also identify certain determinants (neoclassical and institutional factors) that tend to provide largely consistent results across the reviewed studies. In light of this evidence, we finally suggest future lines of research.
Resumo:
The I-district effect hypothesis establishes the existence of highly intense innovation in Marshallian industrial districts due to the presence of external localization economies. However, industrial districts are characterized by specific manufacturing specializations in such a way that this effect could be due to these dominant specializations. The objective of this research is to test whether the effect is explained by the conditions of the territory or by the industrial specialization and to provide additional evidence of the existence and causes of the highly intense innovation in industrial districts (I-district effect). The estimates for Spain of a fixed effects model interacting territory and industry suggest that the high innovative performance of industrial districts is maintained across sectors whereas the industrial specialization behaves differently depending on the type of local production system in which it is placed. The I-district effect is related to the conditions of the territory more than to the industrial specialization. The territory is a key variable in explaining the processes of innovation and should be considered a basic dimension in the design of innovation and industrial policies.