Low-cost CW-LFM radar sensor at 100 GHz

This paper presents a W-band high-resolution radar sensor for short-range applications. Low-cost technologies have been properly selected in order to implement a versatile and easily scalable radar system. A large operational bandwidth of 9 GHz, required for obtaining high-range resolution, is attained by means of a frequency multiplication-based architecture. The system characterization to identify the performance-limiting stages and the subsequent design optimization are presented. The assessment of system performance for several representative applications has been carried out.

Building a decision support system with a knowledge modeling tool

Knowledge modeling tools are software tools that follow a modeling approach to help developers in building a knowledge-based system. The purpose of this article is to show the advantages of using this type of tools in the development of complex knowledge-based decision support systems. In order to do so, the article describes the development of a system called SAIDA in the domain of hydrology with the help of the KSM modeling tool. SAIDA operates on real-time receiving data recorded by sensors (rainfall, water levels, flows, etc.). It follows a multi-agent architecture to interpret the data, predict the future behavior and recommend control actions. The system includes an advanced knowledge based architecture with multiple symbolic representation. KSM was especially useful to design and implement the complex knowledge based architecture in an efficient way.

Desarrollo de una aplicación Android para administración y gestión de la información de registro de servicios en una plataforma SOA

Este Proyecto Fin de Grado está enmarcado dentro de las actividades del GRyS (Grupo de Redes y Servicios de Próxima Generación) con las Smart Grids. En la investigación actual sobre Smart Grids se pretenden alcanzar los siguientes objetivos: . Integrar fuentes de energías renovables de manera efectiva. . Aumentar la eficiencia en la gestión de la demanda y suministro de forma dinámica. . Reducir las emisiones de CO2 dando prioridad a fuentes de energía verdes. . Concienciar del consumo de energía mediante la monitorización de dispositivos y servicios. . Estimular el desarrollo de un mercado vanguardista de tecnologías energéticamente eficientes con nuevos modelos de negocio. Dentro del contexto de las Smart Grids, el interés del GRyS se extiende básicamente a la creación de middlewares semánticos y tecnologías afines, como las ontologías de servicios y las bases de datos semánticas. El objetivo de este Proyecto Fin de Grado ha sido diseñar y desarrollar una aplicación para dispositivos con sistema operativo Android, que implementa una interfaz gráfica y los métodos necesarios para obtener y representar información de registro de servicios de una plataforma SOA (Service-Oriented Architecture). La aplicación permite: . Representar información relativa a los servicios y dispositivos registrados en una Smart Grid. . Guardar, cargar y compartir por correo electrónico ficheros HTML con la información anterior. . Representar en un mapa la ubicación de los dispositivos. . Representar medidas (voltaje, temperatura, etc.) en tiempo real. . Aplicar filtros por identificador de dispositivo, modelo o fabricante. . Realizar consultas SPARQL a bases de datos semánticas. . Guardar y cagar consultas SPARQL en ficheros de texto almacenados en la tarjeta SD. La aplicación, desarrollada en Java, es de código libre y hace uso de tecnologías estándar y abiertas como HTML, XML, SPARQL y servicios RESTful. Se ha tenido ocasión de probarla con la infraestructura del proyecto europeo e-Gotham (Sustainable-Smart Grid Open System for the Aggregated Control, Monitoring and Management of Energy), en el que participan 17 socios de 5 países: España, Italia, Estonia, Finlandia y Noruega. En esta memoria se detalla el estudio realizado sobre el Estado del arte y las tecnologías utilizadas en el desarrollo del proyecto, la implementación, diseño y arquitectura de la aplicación, así como las pruebas realizadas y los resultados obtenidos. ABSTRACT. This Final Degree Project is framed within the activities of the GRyS (Grupo de Redes y Servicios de Próxima Generación) with the Smart Grids. Current research on Smart Grids aims to achieve the following objectives: . To effectively integrate renewable energy sources. . To increase management efficiency by dynamically matching demand and supply. . To reduce carbon emissions by giving priority to green energy sources. . To raise energy consumption awareness by monitoring products and services. . To stimulate the development of a leading-edge market for energy-efficient technologies with new business models. Within the context of the Smart Grids, the interest of the GRyS basically extends to the creation of semantic middleware and related technologies, such as service ontologies and semantic data bases. The objective of this Final Degree Project has been to design and develop an application for devices with Android operating system, which implements a graphical interface and methods to obtain and represent services registry information in a Service-Oriented Architecture (SOA) platform. The application allows users to: . Represent information related to services and devices registered in a Smart Grid. . Save, load and share HTML files with the above information by email. . Represent the location of devices on a map. . Represent measures (voltage, temperature, etc.) in real time. . Apply filters by device id, model or manufacturer. . SPARQL query semantic database. . Save and load SPARQL queries in text files stored on the SD card. The application, developed in Java, is open source and uses open standards such as HTML, XML, SPARQL and RESTful services technologies. It has been tested in a real environment using the e-Gotham European project infrastructure (Sustainable-Smart Grid Open System for the Aggregated Control, Monitoring and Management of Energy), which is participated by 17 partners from 5 countries: Spain, Italy, Estonia, Finland and Norway. This report details the study on the State of the art and the technologies used in the development of the project, implementation, design and architecture of the application, as well as the tests performed and the results obtained.

Una contribución a la programación cognitiva: arquitecturas de segunda generación para representación del conocimiento

La tesis propone el concepto y diseño de una arquitectura cognitiva para representación de conocimiento profesional especializado en clases de dominios relacionados con el mundo físico. Constituye una extensión de los trabajos de B.Chandrasekaran, potenciando el concepto de arquitectura basada en tareas genéricas propuesta por dicho autor. En base a la arquitectura propuesta, se ha desarrollado un entorno como herramienta de construcción de sistemas expertos de segunda generación, así como un lenguaje para programación cognitiva (DECON)- Dicho entorno, programado en lenguaje C sobre UNIX, ha sido utilizado para el desarrollo de un sistema para predicción de avenidas en la Cuenca Hidrográfica del Jucar, en el marco del proyecto SAIH. Primeramente, la tesis plantea el problema de la modelización del comportamiento de los sistemas físicos, reflejando las limitaciones de las formas clásicas de representación del conocimiento para abordar dicho problema, así como los principales enfoques más recientes basados en el concepto de arquitectura cognitiva y en las técnicas de simulación cualitativa. Se realiza después una síntesis de la arquitectura propuesta, a nivel del conocimiento, para detallar posteriormente su desarrollo a nivel simbólico y de implementación, así como el método general para la construcción de modelos sobre la arquitectura. Se muestra también un resumen de los principales aspectos del desarrollo de software. Finalmente, en forma de anejos, se presenta un caso de estudio, el sistema SIRAH (Sistema Inteligente de Razonamiento Hidrológico), junto con la gramática formal del lenguaje de soporte para la definición de modelos.---ABSTRACT---The thesis proposes the concept and design of a cognitive architecture for professional knowledge representation, specialized in domain classes related to the physical world. It is an extensión of the Chandrasekaran's work, improving the concept of Generic Task based architecture introduced by this author. Based on the proposed architecture, an environment has been developed, as a case of second generation building expert systems tool, as well as a language for cognitive programming (DECON). The environment, programmed in C lenguage on UNIX operating system, has been used to develop a system for flood prediction in the Jucar watershed, inside of the SAIH project. Firstly, the behavior modeling problem of physical systems is discussed, showing the limitations of the classical representations to tackle it, beside the most recent approaches based on cognitive architecture concepts and qualitative simulation technique. An overview of the architecture at the knowledge level is then made, being followed by its symbolic and implementation level description, as well as a general guideline for building models on top of the architecture. The main aspects of software development are also introduced. Finaly, as annexes, a case of study -the SIRAH system (Sistema Inteligente de RAzonamiento Hidrológico)- is introduced, along with the formal grammar of the support language for model definition.

Contributions to the Resilience Management in the Internet of Things

El auge del "Internet de las Cosas" (IoT, "Internet of Things") y sus tecnologías asociadas han permitido su aplicación en diversos dominios de la aplicación, entre los que se encuentran la monitorización de ecosistemas forestales, la gestión de catástrofes y emergencias, la domótica, la automatización industrial, los servicios para ciudades inteligentes, la eficiencia energética de edificios, la detección de intrusos, la gestión de desastres y emergencias o la monitorización de señales corporales, entre muchas otras. La desventaja de una red IoT es que una vez desplegada, ésta queda desatendida, es decir queda sujeta, entre otras cosas, a condiciones climáticas cambiantes y expuestas a catástrofes naturales, fallos de software o hardware, o ataques maliciosos de terceros, por lo que se puede considerar que dichas redes son propensas a fallos. El principal requisito de los nodos constituyentes de una red IoT es que estos deben ser capaces de seguir funcionando a pesar de sufrir errores en el propio sistema. La capacidad de la red para recuperarse ante fallos internos y externos inesperados es lo que se conoce actualmente como "Resiliencia" de la red. Por tanto, a la hora de diseñar y desplegar aplicaciones o servicios para IoT, se espera que la red sea tolerante a fallos, que sea auto-configurable, auto-adaptable, auto-optimizable con respecto a nuevas condiciones que puedan aparecer durante su ejecución. Esto lleva al análisis de un problema fundamental en el estudio de las redes IoT, el problema de la "Conectividad". Se dice que una red está conectada si todo par de nodos en la red son capaces de encontrar al menos un camino de comunicación entre ambos. Sin embargo, la red puede desconectarse debido a varias razones, como que se agote la batería, que un nodo sea destruido, etc. Por tanto, se hace necesario gestionar la resiliencia de la red con el objeto de mantener la conectividad entre sus nodos, de tal manera que cada nodo IoT sea capaz de proveer servicios continuos, a otros nodos, a otras redes o, a otros servicios y aplicaciones. En este contexto, el objetivo principal de esta tesis doctoral se centra en el estudio del problema de conectividad IoT, más concretamente en el desarrollo de modelos para el análisis y gestión de la Resiliencia, llevado a la práctica a través de las redes WSN, con el fin de mejorar la capacidad la tolerancia a fallos de los nodos que componen la red. Este reto se aborda teniendo en cuenta dos enfoques distintos, por una parte, a diferencia de otro tipo de redes de dispositivos convencionales, los nodos en una red IoT son propensos a perder la conexión, debido a que se despliegan en entornos aislados, o en entornos con condiciones extremas; por otra parte, los nodos suelen ser recursos con bajas capacidades en términos de procesamiento, almacenamiento y batería, entre otros, por lo que requiere que el diseño de la gestión de su resiliencia sea ligero, distribuido y energéticamente eficiente. En este sentido, esta tesis desarrolla técnicas auto-adaptativas que permiten a una red IoT, desde la perspectiva del control de su topología, ser resiliente ante fallos en sus nodos. Para ello, se utilizan técnicas basadas en lógica difusa y técnicas de control proporcional, integral y derivativa (PID - "proportional-integral-derivative"), con el objeto de mejorar la conectividad de la red, teniendo en cuenta que el consumo de energía debe preservarse tanto como sea posible. De igual manera, se ha tenido en cuenta que el algoritmo de control debe ser distribuido debido a que, en general, los enfoques centralizados no suelen ser factibles a despliegues a gran escala. El presente trabajo de tesis implica varios retos que conciernen a la conectividad de red, entre los que se incluyen: la creación y el análisis de modelos matemáticos que describan la red, una propuesta de sistema de control auto-adaptativo en respuesta a fallos en los nodos, la optimización de los parámetros del sistema de control, la validación mediante una implementación siguiendo un enfoque de ingeniería del software y finalmente la evaluación en una aplicación real. Atendiendo a los retos anteriormente mencionados, el presente trabajo justifica, mediante una análisis matemático, la relación existente entre el "grado de un nodo" (definido como el número de nodos en la vecindad del nodo en cuestión) y la conectividad de la red, y prueba la eficacia de varios tipos de controladores que permiten ajustar la potencia de trasmisión de los nodos de red en respuesta a eventuales fallos, teniendo en cuenta el consumo de energía como parte de los objetivos de control. Así mismo, este trabajo realiza una evaluación y comparación con otros algoritmos representativos; en donde se demuestra que el enfoque desarrollado es más tolerante a fallos aleatorios en los nodos de la red, así como en su eficiencia energética. Adicionalmente, el uso de algoritmos bioinspirados ha permitido la optimización de los parámetros de control de redes dinámicas de gran tamaño. Con respecto a la implementación en un sistema real, se han integrado las propuestas de esta tesis en un modelo de programación OSGi ("Open Services Gateway Initiative") con el objeto de crear un middleware auto-adaptativo que mejore la gestión de la resiliencia, especialmente la reconfiguración en tiempo de ejecución de componentes software cuando se ha producido un fallo. Como conclusión, los resultados de esta tesis doctoral contribuyen a la investigación teórica y, a la aplicación práctica del control resiliente de la topología en redes distribuidas de gran tamaño. Los diseños y algoritmos presentados pueden ser vistos como una prueba novedosa de algunas técnicas para la próxima era de IoT. A continuación, se enuncian de forma resumida las principales contribuciones de esta tesis: (1) Se han analizado matemáticamente propiedades relacionadas con la conectividad de la red. Se estudia, por ejemplo, cómo varía la probabilidad de conexión de la red al modificar el alcance de comunicación de los nodos, así como cuál es el mínimo número de nodos que hay que añadir al sistema desconectado para su re-conexión. (2) Se han propuesto sistemas de control basados en lógica difusa para alcanzar el grado de los nodos deseado, manteniendo la conectividad completa de la red. Se han evaluado diferentes tipos de controladores basados en lógica difusa mediante simulaciones, y los resultados se han comparado con otros algoritmos representativos. (3) Se ha investigado más a fondo, dando un enfoque más simple y aplicable, el sistema de control de doble bucle, y sus parámetros de control se han optimizado empleando algoritmos heurísticos como el método de la entropía cruzada (CE, "Cross Entropy"), la optimización por enjambre de partículas (PSO, "Particle Swarm Optimization"), y la evolución diferencial (DE, "Differential Evolution"). (4) Se han evaluado mediante simulación, la mayoría de los diseños aquí presentados; además, parte de los trabajos se han implementado y validado en una aplicación real combinando técnicas de software auto-adaptativo, como por ejemplo las de una arquitectura orientada a servicios (SOA, "Service-Oriented Architecture"). ABSTRACT The advent of the Internet of Things (IoT) enables a tremendous number of applications, such as forest monitoring, disaster management, home automation, factory automation, smart city, etc. However, various kinds of unexpected disturbances may cause node failure in the IoT, for example battery depletion, software/hardware malfunction issues and malicious attacks. So, it can be considered that the IoT is prone to failure. The ability of the network to recover from unexpected internal and external failures is known as "resilience" of the network. Resilience usually serves as an important non-functional requirement when designing IoT, which can further be broken down into "self-*" properties, such as self-adaptive, self-healing, self-configuring, self-optimization, etc. One of the consequences that node failure brings to the IoT is that some nodes may be disconnected from others, such that they are not capable of providing continuous services for other nodes, networks, and applications. In this sense, the main objective of this dissertation focuses on the IoT connectivity problem. A network is regarded as connected if any pair of different nodes can communicate with each other either directly or via a limited number of intermediate nodes. More specifically, this thesis focuses on the development of models for analysis and management of resilience, implemented through the Wireless Sensor Networks (WSNs), which is a challenging task. On the one hand, unlike other conventional network devices, nodes in the IoT are more likely to be disconnected from each other due to their deployment in a hostile or isolated environment. On the other hand, nodes are resource-constrained in terms of limited processing capability, storage and battery capacity, which requires that the design of the resilience management for IoT has to be lightweight, distributed and energy-efficient. In this context, the thesis presents self-adaptive techniques for IoT, with the aim of making the IoT resilient against node failures from the network topology control point of view. The fuzzy-logic and proportional-integral-derivative (PID) control techniques are leveraged to improve the network connectivity of the IoT in response to node failures, meanwhile taking into consideration that energy consumption must be preserved as much as possible. The control algorithm itself is designed to be distributed, because the centralized approaches are usually not feasible in large scale IoT deployments. The thesis involves various aspects concerning network connectivity, including: creation and analysis of mathematical models describing the network, proposing self-adaptive control systems in response to node failures, control system parameter optimization, implementation using the software engineering approach, and evaluation in a real application. This thesis also justifies the relations between the "node degree" (the number of neighbor(s) of a node) and network connectivity through mathematic analysis, and proves the effectiveness of various types of controllers that can adjust power transmission of the IoT nodes in response to node failures. The controllers also take into consideration the energy consumption as part of the control goals. The evaluation is performed and comparison is made with other representative algorithms. The simulation results show that the proposals in this thesis can tolerate more random node failures and save more energy when compared with those representative algorithms. Additionally, the simulations demonstrate that the use of the bio-inspired algorithms allows optimizing the parameters of the controller. With respect to the implementation in a real system, the programming model called OSGi (Open Service Gateway Initiative) is integrated with the proposals in order to create a self-adaptive middleware, especially reconfiguring the software components at runtime when failures occur. The outcomes of this thesis contribute to theoretic research and practical applications of resilient topology control for large and distributed networks. The presented controller designs and optimization algorithms can be viewed as novel trials of the control and optimization techniques for the coming era of the IoT. The contributions of this thesis can be summarized as follows: (1) Mathematically, the fault-tolerant probability of a large-scale stochastic network is analyzed. It is studied how the probability of network connectivity depends on the communication range of the nodes, and what is the minimum number of neighbors to be added for network re-connection. (2) A fuzzy-logic control system is proposed, which obtains the desired node degree and in turn maintains the network connectivity when it is subject to node failures. There are different types of fuzzy-logic controllers evaluated by simulations, and the results demonstrate the improvement of fault-tolerant capability as compared to some other representative algorithms. (3) A simpler but more applicable approach, the two-loop control system is further investigated, and its control parameters are optimized by using some heuristic algorithms such as Cross Entropy (CE), Particle Swarm Optimization (PSO), and Differential Evolution (DE). (4) Most of the designs are evaluated by means of simulations, but part of the proposals are implemented and tested in a real-world application by combining the self-adaptive software technique and the control algorithms which are presented in this thesis.

Herramienta EN 301 549: cliente web

En el año 2014 se publicó, bajo mandato de la Comisión Europea, la Norma Europea EN 301 549, titulada “Requisitos de accesibilidad de productos y servicios TIC aplicables a la contratación pública en Europa”. El objetivo de dicha norma es que los productos o servicios TIC (Tecnologías de la Información y la Comunicación) adquiridos por cualquier administración pública europea puedan ser utilizados por personas con diversas características y capacidades, incluyendo a personas con discapacidad. La norma EN 301 549 es compleja, ya que contiene más de 200 requisitos y recomendaciones, que se aplican o no a un producto o servicio TIC en función de las características de dicho producto o servicio. Por ello se ha planteado, desde el Grupo de Investigación en Tecnología Informática y de las Comunicaciones (CETTICO), el desarrollo de una herramienta de soporte a la evaluación del cumplimiento de la norma. La herramienta permitirá a grupos de trabajo anotar los resultados de la evaluación de accesibilidad de un producto o servicio TIC siguiendo los requisitos de la norma Europea EN 301 549. Este trabajo de Fin de Grado se centra en el diseño y codificación del cliente web de la herramienta. Se parte de los resultados de un TFG y un practicum anteriores. En el TFG realizado por Laura Elorrieta [Elorrieta, 2014], se diseñó la interacción del sistema y se evaluó su grado de usabilidad. En el practicum [Montero, 2015], posterior al TFG de Laura Elorrieta, se eligieron las tecnologías web que se iban a utilizar y se realizó el diseño y la implementación mediante prototipos iterativos de la gestión de proyectos de evaluación. El trabajo que se ha realizado en el TFG ha consistido en el diseño de la interfaz de usuario analizando los cambios a realizar en el diseño, debido a los errores de usabilidad conocidos, y la implementación del prototipo funcional de la herramienta. Junto con la parte servidor del TFG de mi compañero Rubén Ortiz Burgos y la interfaz de usuario de este TFG se ha obtenido una aplicación web para realizar evaluaciones de accesibilidad de productos o servicios TIC siguiendo los requisitos de la norma EN 301 549. El prototipo funcional contiene diez páginas web que recogen las diferentes acciones y tareas que pueden realizar los usuarios en función del rol que desempeñen. EL diseño y la implementación se han llevado a cabo empleando las tecnologías web HTML5, CSS3, JavaScript, jQuery y las librerías de Foundation frontend framework.---ABSTRACT---In 2014, under the European Commission mandate, the European standard EN 301 549 has been published under the title “Accessibility requirements applicable to ICT products and procurement services in Europe”. The goal of this standard is that the products or services ICT (Information Communication Technology) acquires by every European public administration can be used by every person with different characteristics and capacities, including those with disability. The rule EN 301549 is very complex, since it has more than 200 requirements and recommendations that can be or not applied to an ICT product or service based on its characteristics of the given product or service. That’s why a development of a support tool has been proposed to the rating of the compliance of the rule, by the Research Group of Informatics Technology and Communication. This tool will allow working groups to record the results of the compliance of accessibility of a product or service following the requirements of the European Standard EN 301549. This Final Degree Work focuses in the design and the coding of the web customer of this tool. The results of a TFG and previous practicums have been used for this. The TFG performed by Laura Elorrieta [Elorrieta, 2014], the interaction of the system was designed and degree of usability was evaluated. In the practicum [Montero, 2015], after the TFG Laura Elorrieta, web technologies used were chosen and the design and implementation were performed using iterative prototyping project management evaluation. The work done on the TFG was to design the users interface to perform analyzing changes in design due to errors known usability and working prototype implementation of the tool. Together with the server part of the TFG my partner Rubén Ortiz Burgos and the user interface done of this TFG it has obtained a web application for the conduct of evaluations accessibility of products or services ICT following the requirements of the EN 301 549. The functional prototype contains ten web sites that collect the various activities and tasks that users can perform based on the role they perform. The design and implementation have been carried out using the technologies web HTML5, CSS3, Java Script, jQuery and the libraries of Foundation fronted framework.

Colaboração e cooperação entre sistemas produtivos dispersos de empresas virtuais.

No mercado global e digital, as empresas são desafiadas a encontrar caminhos inovadores para atender o aumento da pressão -competitiva. A competição é uma das formas de interação das organizações, além da colaboração e da cooperação. A cooperação e a colaboração apresentam formas de produzir conjuntamente aumentando o potencial de atendimento das empresas. Os desafios mais encontrados no mercado são: reduzir os custos, sempre assegurar qualidade e personalizar os produtos e serviços. Um fenômeno de negócios comum hoje é a terceirização da manufatura e da logística para fornecedores domésticos e estrangeiros e provedores de serviços. Essa terceirização provoca, intrinsecamente, um espalhamento geográfico da produção em novos centros que oferecem vantagens nos recursos energéticos, matérias primas e centros de produção de conhecimento. Essa terceirização pode ser realizada também nas formas de colaboração e cooperação. Para isso, as empresas necessitam estabelecer uma forma de confiança entre si. No conceito de empresa virtual, a confiança é amplamente discutida para atingir uma colaboração e/ou cooperação entre empresas. O objetivo deste trabalho é propor e modelar uma ferramenta que atenda as necessidades das empresas para colaboração e/ou cooperação entre elas, considerando suas necessidades de confiança. As empresas aqui são vistas como sistemas produtivos, com suas camadas de gerenciamento de negócios, de acordo com o padrão ANSI/ISA 95. Além disso, um tipo de interpretação da rede de Petri, chamada de rede de Petri produtiva é introduzida como ferramenta para descrever o processo produtivo realizado pelas empresas na forma de workflow. A modelagem dessa arquitetura do sistema produtivo utiliza técnicas de sistemas distribuídos, como a arquitetura orientada a serviços. Além disso, um dos enfoques é das necessidades para o desenvolvimento de novos produtos, que envolve o desafio de personalização. Testes foram realizados para avaliar a proposta de workflow com pessoas de diferentes níveis de conhecimento sobre os processos, sejam de manufatura, sejam de outras áreas. Já a arquitetura proposta foi submetida a um estudo analítico das hipóteses levantadas no ambiente colaborativo.

Arquitetura computacional para redes orgânicas e heterogêneas: plano de controle do sistema operacional swarm.

Computational Swarms (enxames computacionais), consistindo da integração de sensores e atuadores inteligentes no nosso mundo conectado, possibilitam uma extensão da info-esfera no mundo físico. Nós chamamos esta info-esfera extendida, cíber-física, de Swarm. Este trabalho propõe uma visão de Swarm onde dispositivos computacionais cooperam dinâmica e oportunisticamente, gerando redes orgânicas e heterogêneas. A tese apresenta uma arquitetura computacional do Plano de Controle do Sistema Operacional do Swarm, que é uma camada de software distribuída embarcada em todos os dispositivos que fazem parte do Swarm, responsável por gerenciar recursos, definindo atores, como descrever e utilizar serviços e recursos (como divulgá-los e descobrí-los, como realizar transações, adaptações de conteúdos e cooperação multiagentes). O projeto da arquitetura foi iniciado com uma revisão da caracterização do conceito de Swarm, revisitando a definição de termos e estabelecendo uma terminologia para ser utilizada. Requisitos e desafios foram identificados e uma visão operacional foi proposta. Esta visão operacional foi exercitada com casos de uso e os elementos arquiteturais foram extraídos dela e organizados em uma arquitetura. A arquitetura foi testada com os casos de uso, gerando revisões do sistema. Cada um dos elementos arquiteturais requereram revisões do estado da arte. Uma prova de conceito do Plano de Controle foi implementada e uma demonstração foi proposta e implementada. A demonstração selecionada foi o Smart Jukebox, que exercita os aspectos distribuídos e a dinamicidade do sistema proposto. Este trabalho apresenta a visão do Swarm computacional e apresenta uma plataforma aplicável na prática. A evolução desta arquitetura pode ser a base de uma rede global, heterogênea e orgânica de redes de dispositivos computacionais alavancando a integração de sistemas cíber-físicos na núvem permitindo a cooperação de sistemas escaláveis e flexíveis, interoperando para alcançar objetivos comuns.

A Construction Management Framework for Mass Customisation in Traditional Construction

A Mass Customisation model is discussed as a competitive positioning strategy in the marketplace adding value to the customer’s end-use. It includes the user as part of the construction process responding to the customer’s demands and wishes. To the present day, almost all proposals for Mass Customisation have been focused on the design phase and single family houses. The reality is that the processes carried out in the work execution are so inefficient that the costs of the Mass Customisation models are assumed by the customer and they do not offer solutions that support the change management. Furthermore, this inefficiency often makes Mass Customisation unfeasible in terms of deadlines and site management. Therefore, the present proposal focuses on achieving the paradigm of Mass Customisation in the traditional residential construction complementary to the existing proposals in the design phase. All this through the proposal of a framework for the integral management in the work execution, which will address change management introduced by the users offering an efficient and productive model that reduces costs in the process. This model will focus on the synergy between different strategies, techniques and technologies currently used in the construction management (such as Lean Construction or Six Sigma), together with, other strategies and technologies that have proven to be valid solutions in other fields (such as Business Process Management, Service Oriented Architecture, etc.).

Conceptual Modelling of Complex Network Management Systems

Society, as we know it today, is completely dependent on computer networks, Internet and distributed systems, which place at our disposal the necessary services to perform our daily tasks. Moreover, and unconsciously, all services and distributed systems require network management systems. These systems allow us to, in general, maintain, manage, configure, scale, adapt, modify, edit, protect or improve the main distributed systems. Their role is secondary and is unknown and transparent to the users. They provide the necessary support to maintain the distributed systems whose services we use every day. If we don’t consider network management systems during the development stage of main distributed systems, then there could be serious consequences or even total failures in the development of the distributed systems. It is necessary, therefore, to consider the management of the systems within the design of distributed systems and systematize their conception to minimize the impact of the management of networks within the project of distributed systems. In this paper, we present a formalization method of the conceptual modelling for design of a network management system through the use of formal modelling tools, thus allowing from the definition of processes to identify those responsible for these. Finally we will propose a use case to design a conceptual model intrusion detection system in network.

A cross-national comparison of cultural value orientations of Indian, Polish, Russian and American employees

This study examines the cultural value orientations (VOs) of employees (managerial and non-managerial) working in three categories of organizations (professional, technical and local services) in India, Poland, Russia and the USA. The analysis is conducted at both the national and organizational levels. The paper hypothesizes cultural differences at the country level and cultural similarities among employees working for professional and technical oriented organizations and divergence in the VOs of employees working for local services organizations. It also hypothesizes differences in the VOs of managerial and non-managerial employees in the four countries. The investigation has been conducted with the help of a questionnaire survey of 1,852 respondents. The outcomes of the analysis show that there are both cross-country cultural differences and similarities among the VOs of employees of the four nations. Further, significant cultural convergence emerges in the VOs of employees working for both professional and technical organizations, however, no significant cultural similarities or differences are observed for employees of service-based organizations in the four countries. There are some similarities emerging between managerial employees in the research countries. The research contributes to the fields of cross-cultural management, international management and international human resource management.

'Between a rock and a hard place':towards a theorisation of the role of gender in junior management

This paper seeks to theorise the role that gender plays in the careers of junior female managers. We do this by drawing upon two separate empirical studies, firstly a largescale study based on interviews with female managers in the West Midlands (UK) is used to explore the growth of female participation in junior managerial roles with reference to the notion of managerial careers as seduction. We explore the routes the women have taken into junior management careers and the barriers that exist to progression toward more senior roles. Secondly, a small-scale ethnographic study of a large service-based organization, also based in the West Midlands, is documented in an attempt to theorise the organizational role of female junior managers. While the dominance of masculine values and practices in organisations is explored, we also argue that growing female participation at junior managerial levels can only partly be explained by female managers adopting, or appearing to adopt, masculine behaviours. We seek to contribute to a fuller explanation by drawing attention to the way in which senior managers in the case study sought to employ female junior managers particularly for their perceived feminine skills. Significantly, however the ethnography reveals the ambiguously gendered construction of female junior managers roles through an exploration of the enactment of both masculine and feminine practices during the ‘doing’ of management.

Pharmacy and public health: examining the link between strategy and practice

Despite having been described by the then (2003) Chief Pharmaceutical Officer for England as ·probably the biggest untapped resource for health improvement", the development of the public health function of community pharmacists has been limited. However, devolution of healthcare budgets has led 10 differential rates of development of the public health function in each administration of the UK (England, Scotland, Wales and Northern Ireland). This is measured and reflected upon in this thesis. Two large-scale surveys were conducted, one of key strategic personnel (Directors of Public Health and Chief Pharmacists) in Primary Care Organisations (PCOs) and one of practicing community pharmacists. This research highlights the fact that community pharmacists have developed an individualistic, service-based approach to their engagement with public health that is contrary to the more collective approach adopted by the wider public health movement. The study measures the scope and level of health-improving services through community pharmacy across the UK and shows that the nature of the pharmacy contractor (independent, multiple etc.) may impact on the range and nature of services provided. Survey data also suggest that attitudes towards pharmacy involvement in the public health agenda vary markedly between Directors of Public Health, PCO Chief Pharmacists, and community pharmacists. Furthermore, within the community pharmacist population, attitudes are affected by a wide range of factors including the nature of employment (owner, employee, self-employed) and the type of employing pharmacy (independent, multiple etc.). Implications for policy and areas for further research aimed at maximising the public health function of community pharmacists are suggested.

"Girls Who Do Boys Like They’re Girls": gender and call centre’s junior management

This paper focuses on the structuring of work and organization by exploring the hierarchical and gendered nature of the division of labour within a contemporary service-based organization. Central to our account is the role of the ‘team leader’, which we argue, as a junior management position, occupies a key role in understanding and accounting for the gendered hierarchical terrain of the organization. In exploring the role of team leaders, a position that empirically, tends overwhelming to be held by female members of staff, we draw attention to the perception of the gendered nature of the role by subordinate members of the organization, team-leaders themselves, and more senior members of staff. The specific constitution and character of the team leader position is brought into sharp relief through comparison with the subordinate role of ‘problem manager’, a position which was overwhelming held by men. Our ethnographic approach attempts to draw attention to that which is both ‘said’ and ‘done’ within the organizational context and the account of junior managers that emerges is highly gendered. The paper seeks to map this account onto the existing and on-going debate within Gender and Organizational research, which explores, documents and challenges Masculinities at work.

Transition of legacy systems to semantically enabled applications:TAO method and tools

Despite expectations being high, the industrial take-up of Semantic Web technologies in developing services and applications has been slower than expected. One of the main reasons is that many legacy systems have been developed without considering the potential of theWeb in integrating services and sharing resources.Without a systematic methodology and proper tool support, the migration from legacy systems to SemanticWeb Service-based systems can be a tedious and expensive process, which carries a significant risk of failure. There is an urgent need to provide strategies, allowing the migration of legacy systems to Semantic Web Services platforms, and also tools to support such strategies. In this paper we propose a methodology and its tool support for transitioning these applications to Semantic Web Services, which allow users to migrate their applications to Semantic Web Services platforms automatically or semi-automatically. The transition of the GATE system is used as a case study. © 2009 - IOS Press and the authors. All rights reserved.